How do I get Cross Dissolves to work even when there is plenty of media

I have 10 minute movie with many different video segments. I have added cross dissolves throughout the movie, and many go in with no problem, I just drag and drop them, and then I can easily drag the dissolve longer or shorter. However, on about half of the clips, I can't add a dissolve. There is plenty of media available (most clips are about 10 or 15 seconds long). It won't let me drop a cross dissolve at all. Sometimes, it lets me drop the dissolve, but only on one of the two clips I want it, and when that happens, the dissolve is very short and it won't let me extend it. Again, there is plenty of media available, and it will let me use the dissolve on about half of the clips (all the clips are pretty much the same--same source, same file type, same length, etc.). I've tried some suggestions online, but most suggest that the problem is with available media--I don't think that's my problem. Any suggestions?

+I've tried some suggestions online, but most suggest that the problem is with available media--I don't think that's my problem. Any suggestions?+
You don't have enough media.
Move your IN point a few seconds into the clip, and then drop it into the timeline.
Now apply dissolve
Niel

Similar Messages

  • When I synch my ipod touch it only lets 50 videos get on ipod . I can't get the other videos on even though there's plenty of space available and it's set to synch all movies

    When I synch my ipod touch it only lets 50 videos get on ipod . I can't get the other videos on even though there's plenty of space available and it's set to synch all movies. What am I missing?

    i had the same problem. did a lot of research..my phone became unusuable. do you use the htc mail? if so that is your problem. there is a bug with it that it keeps eating your memory until you cannot use your phone. i had to do a hard reset. back to factory condition..not happy! but then went to the marketplace and got k-9 mail. that is now my default mail program. i have not had any issues since then. this is what i kept reading over and over for complaints on this phone. it is a major glitch and the only way, as of the time it happened to me, to fix it..

  • HT201209 How do i get my card to work if when i've scratched it off, all the numbers have come off also??

    How do i get my iTunes card to work if when i've tried to scratched it off, the code has come off all together??

    With any luck, the following document may be of some assistance with that:
    iTunes Store: Invalid, inactive, or illegible codes

  • How to make my SSIS package execute successfully, even when there is no input feed file which is actually expected.

    Hello,
    Currently I am running a SSIS package scheduled daily at 7 A.M. It expects two feed files from two different folders. 
    The first step in my package will rename the input files in those folders to  names which the package can understand. I have created two variables in my package to read the files with those file names. I used these variables in connection managers.
    If any of these folders doesn't have input files when the package runs, the package will fail. Can someone please let me know how to make the package the run successfully even there is no input feed?
    Any help is highly appreciated.
    Thank you.

    Why not add a check to see if filecount > 0 from the folder. ANd only if it exists do the next set of tasks ie rename + other processing.
    For this you can use a logic like below
    http://sqlage.blogspot.in/2013/07/ssis-how-to-check-if-file-exists-in.html
    Then link the output of this script task to your rename task using conditional precedence constraint usig Expression and Constriant option. Set Constraint as OnSuccess and Expression as below
    @FileExistsFlg == 1
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • How do I get my phone to work again when I have a "iphone is disabled" message?

    I need help resetting my iphone 4S.  I have the message "iphone is disabled".  How do I clear that so I can use my phone?

    The following has instructions: iOS: Forgot passcode or device disabled

  • How can I get column sorting to work again when column sort is stuck on release date in the different views (list, album list, and cover flow) in my PC?

    I can't sort using other columns because the sorting is stuck/ locked on release date. This is only true for my iTunes U Library. My other libraries and playlists for Music, Movies and TV Shows, Books can be sorted.

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
    Regards.

  • How do I get drop shadows to work correctly when using HTML5 to publish?

    When publishing this course in HTML 5, drop shadows applied to smart shapes go a little haywire. What settings can I update on these objects to make them appear correctly?  Thanks for your help!
    Object settings:
    White solid fill, opactiy 100%
    1pt stroke
    Standard publish to web broswer:
    Publishing in HTML5:

    Looks like the shadow is being applied to the outline. Smart shapes are drawn with canvas in HTML5 so you'd need to hackinto the code to try and fix it. You could try an outline with no fill on top of the shape with the text, white background, no outline and apply the shadow to that smart shape. Group the objects for convenience.

  • How do you get the disc tray to open when ther is a software boot up problem?

    I just downloaded Motion 5 software and it froze my screen. I panic and pressed the power button for a foced shut down. Now my computer boots up to a blank blue screen. Prior to this I made some system prefrence chages to the desk top.Don't remeber what they were though. Any help would be greatly appreciated.
    Stuart

    If your computer no longer starts up then you will need to reinstall Snow Leopard:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
    1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
    2. Press the Eject button on your keyboard.
    3. Click on the Eject button in the menubar.
    4. Press COMMAND-E.
    5. If none of the above work try this: Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
         /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

  • Getting lots of "NetStream.Play.InsufficientBW" when there's plenty of Bandwidth

    Hi All,
    We've upgraded our production servers to 3.5.3 on Windows 2008, and now I'm seeing a lot of "NetStream.Play.InsufficientBW" statuses in our client app's log.  The server is streaming a very low bandwidth live video/audio stream, and the client has more than plenty of bandwidth to play it.  The stream doesn't exhibit any audio drops or skipped frames, and there are no message drops on the server side.  We have had clients complaining of random disconnects.  Does anyone know why I might be getting this message?  If anyone from Adobe could help with this, I'd greatly appreciate it.  Thank you.
    Best,
    -Costin

    Hi Asa,
    Thanks for the reply! 
    Unfortunately, I already had this in my Application.xml and it was still doing it:
         <Queue enabled="false">
    Any other work arounds at this time?
    In addition, I'm getting reports that users are getting disconnected.  After some arbitrary time, the server issues a "NetConnection.Connect.Rejected" for no reason, or at least none that I can find.  Is this also a known issue?  Please advise, since this is happening on our production systems.  Should I roll back to 3.5.2?
    Thank you!
    -Costin

  • How do I get my audio to work again on my iPad?

    How do I get my audio to work again when I play video links on my iPad 2?  Think the problem might have started when I did the update to IOS 7.1.  I click on a video link when I'm in an app like Facebook.  The video plays, but no audio.  I used to be able to open the link in Safari and the be able to hear the audio.  But now that doesn't work either.  Apple support helped with a similar problem in10/3013.  They made me back up my iPad to ITunes through my laptop and think they wiped my iPad and re-loaded the software.  Is there any other fix?

    I just saw an answer that "Demo" posted 9/30/2012.  Said to re-boot the iPad system by holding Down to the sleep and home buttons at the same time until the apple logo screen popped up.  It worked.  I I've got audio again on my video links!

  • How do I get the ipad to notify me when rec. e-mail?

    how do I get the ipad to notify me when there is mail or reminders ?

    Go to settings --> notifications ---> mail turn on notifications
    Same thing with reminders :)

  • HT1657 Some movie rentals will download but there is the odd Rental that won't. how do I get those ones to work?

    Some movie rentals will download but there is the odd Rental that won't. how do I get those ones to work?

    +I've tried some suggestions online, but most suggest that the problem is with available media--I don't think that's my problem. Any suggestions?+
    You don't have enough media.
    Move your IN point a few seconds into the clip, and then drop it into the timeline.
    Now apply dissolve
    Niel

  • I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

    I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

    Will not work.  To my knowledge, dual converting like that isn't supported.  The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

  • The touch screen is not working when I am in the Music app of my iPod Touch.  How do I get it to begin working?  It just stopped today.

    The touch screen is not working when I am in the Music app of my iPod Touch.  How do I get it to begin working?  It just stopped today.
    Does anyone know what I can do?  I am unable to switch screens, and I can not see the track that is playing.  The only was I can switch between songs is to use the controls on my headphones.

    Try the stamdard fixes to rule out a software problem:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found.  how do I get Itunes to start working again?

    After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found.  how do I get Itunes to start working again?

    See... Unable to install or open > http://support.apple.com/kb/TS5376
    Also See this User Tip by turingtest2
    https://discussions.apple.com/docs/DOC-6562

Maybe you are looking for

  • Burned CD's sound terrible on some consumer players

    I burned 8 audio cd"s as a gift for my mom and gave them along with a new Philips CD player-rated for cd-r and rw. almost all the songs on each disc were skipping or had a static "blip" every few seconds, a couple of them the player would not recgniz

  • Synchronize WF LOCAL tables error

    hi, I am getting the following error while running Synchronize WF LOCAL tables ORA-12801: error signaled in parallel query server P002 ORA-01400: cannot insert NULL into ("APPLSYS"."WF_LOCAL_ROLES_STAGE"."DISPLAY_NAME") i did not insert any null valu

  • Is it possible to change javascript popup colour?

    in the current version, when a alert/confirmation dialog opens with background grays, the default color of the popup is half white(top) and half light-gray(bottom) . Is it possible to make it to one color( by any coding changes (or) settings in Firef

  • Clone a user in OIM

    Hello everyone We have a requirement if one user is replacing another, we have to clone user attributes and resource attributes from the old user to the new one including the attributes manually modified not just these populated by access policies .

  • Tuning SQL Query calling multiple views

    Dear All, I have a complex scenario in which I have created views in 3 levels for sales and Service separately so total no of views are 6. Level 2 calls view in Level 1 and Level 3 calls level 2 in sales as well as services. Finally Level 4 has the u