How do I get FCP to count the number of cuts in my sequence?

Can anyone help me with this? Is there a command or short cut to getting FCP to count the number of cuts in my sequence? I've edited together a 75 minute film, and I need to find out how many cuts there are in it, and short of doing it manually (which would take forever), I'm at a loss for a solution. Thanks so much!
Best,
Marianne

Hi there,
Thanks for the answer. I did that, but a couple of master clips showed up in the bin, that I wasn't using in the movie. Not at a lot, maybe 10-20 out of almost a 1000. Then I found a better way. I pasted the whole film into a new sequence, removed all sound and text, so it left only the video clips, and I also tried as much as possible to group all the clips on the V1 track of the timeline, and then I selected show item properties (with the whole sequence highlighted) and FCP shows a warning to the effect: "Can only show the first 100 clips out of ???, in my case it was 963.

Similar Messages

Hey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages it only show imessage and message count )HELP)

ey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages it only show imessage and message count )HELP)

At the bottom of the page Settings > Messages you should have a section headed "SMS/MMS" Turn MMS messaging on then you can turn group message on.

How do I get a page count from the HP Photosmart 5514?

How do I get a page count from the HP Photosmart 5514?

Simple. Access the printer web gui by typing in the printers IP address into your browsers address bar. Select Tools/Usage reports. Done.

How do i get fcp set up to make multi clip cuts buy just clicking on the boxes in the viewer

how do i get fcp set up to make multi clip cuts buy just clicking on the boxes in the viewer

This forum is all about FCP X. You should ask your question in the FInal Cut Pro Studio forum.

How do I count the number of records returned in the CMIS query

How do I count the number of records returned in the query CMIS?
SELECT COUNT(*) FROM ora:t:IDC:GlobalProfile WHERE ora:p:xRegionDefinition = \'RD_PROJETOS_EXCLUSIVOS\''}
Euler Homero

Hi Euler,
interestingly enough, the reference guide for CMIS ( http://wiki.alfresco.com/wiki/CMIS_Query_Language ) that I found does not mention the COUNT function at all. On the other hand it states that: "The SELECT clause identifies which virtual columns to return in the result set. It can be either a comma-separated list of one or more queryNames of properties that are defined by queryable object types or * for all virtual columns."
There are, however, some other posts like e.g. http://alfrescoshare.wordpress.com/2010/01/20/count-the-total-number-of-documents-in-alfresco-using-sql/ which state that they could make it working.
Having asked in the WebCenter Portal forum, I assume that your content repository is WebCenter Content. The CMIS doc for the Content is available here: http://docs.oracle.com/cd/E23943_01/doc.1111/e15813.pdf (no COUNT there either). It does, however, mention explicitly that "CMIS queries return a Result Set where each Entry object will contain only the properties that were specified in the query.". This means your could rather investigate the Result Set. Note that there are also other means than CMIS how to get the requested result set (e.g. calling a search service directly via so-called RIDC).
In the given context I am also interested what your use case is. OOTB CMIS in WebCenter Portal is used, for instance, in Content Presenter, where it is content rather than "parameters" what's displayed.

How do I get a word count in Pages 5.5.2?

I have a 21.5" iMac, bought December, 2014. I have Yosemite 10.10.2 installed and I am using Pages 5.5.2.
How do I get a Word Count in Pages 5.5.2?

View menu > Show Word Count.
A floating panel will appear at the bottom of your document. Pass your mouse over the right-side of this floating panel and you will see up/down arrows. Click. Choose Word count from the list of available counts. The floating panel now displays word count, until you change it again. You can also move this floating panel with a command+click+drag, in case you want it below your footer content.
You might want to download the free WordService service solution from the OS X App Store. I provides you with many additional features (e.g. Sort Ascending, Document Statistics, etc.) The act of downloading this application will install, but not activate several services. You activate what you want in:
System Preferences > Keyboard > Shortcuts > Services : WordService:servicename.
The WordService application will be in your LaunchPad (on your left Dock). Run it and choose Help. This will launch the Preview PDF viewer and a document showing all the Services available, and their description. Services in OS X act on selected document content. If you want more detail on the number of words, characters, and spaces in a selected paragraph, you would use Pages > Services > WordService:Statistics.

How i can count the number of words in a string?

hi, i want to know how to count the number of words in a string
e.g. java is a very powerful computer language.
i will get 7 words.
thanks in advance..

Jverd, this has actually been answered, but due to an
attack of goldie-itis, all the answers were hosed.
The OP did get an answer, though.Yeah, I know. I just didn't know if he saw the answer before it went away.

How to count the number of cycles in sine wave

Hi,
I am new to Labview. I have labview 8.2 version and my dataacquisition is NIDAQPAD6015. I could write a program to generate a sine wave of desired frequency through simulate signal. My question is how do i measure the number of cycles for this sine wave as soon as I run the program. Hope my question is clear.
Ravi Mokirala

To find the offset (which in this case is the Y value midpoint around which the sine wave is symetrical):
Capture more than one cycle. Find the min and max values. Subtract Min from Max and divide by 2. Then subtract this result from the Max value (or add the result to the Min value). This is the offset.
To count the number of cycles where the offset is unknown, just use the first data point value as a reference. If the next data point is more positive, then count the number of times that the first data point is repeated and the next data point is more positive. Of course with DBL data type, you probably would not get the exact same value as the first data point, so you need to use In Range with a very tiny limit. It all depends on your signal amplitude, frequency, and sampling rate.
Example: Lets say your first data point value is 0.5 and the 2nd point is 0.55. You need to look for another value that is between 0.48 and 0.52. Then read the very next data point value. If it is greater than the previous value, add one to the cycle count. If it is less than, you are at half a cycle, do not add to the count.
- tbob
Inventor of the WORM Global

How to count the number of Rows to be Updated before Update takes place..

Hi all,
I have a requirement, where i have to count the number of rows to be updated before updating it. SQL%ROWCOUNT gives the no. of rows updated ( after update takes place). How do i get to know the count of no. of rows to be updated/inserted/ deleted. I was looking for a simple solution, as above SQL%Rowcount. But i couldn't find any. I can use a Function and Return the value which will give me number of rows to be updated, But is there any Simple Logic other than this.. or any count function. Your Help is Appreciated. Thanks!

If you really want to do this (I have no clue why you would need it), then you can piggy back on any existing pessimistic locking you may already have in place.
However, it would require two loops through the records of which you want to know the count before you update, and a second pass to update them.
I would really re-think the need for this, though.
SQL> create table t0304(c number);
Table created.
SQL> insert into t0304 select rownum from all_objects where rownum <= 10;
10 rows created.
SQL> commit;
Commit complete.
SQL> select * from t0304;
         C
         1
         2
         3
         4
         5
         6
         7
         8
         9
        10
10 rows selected.
SQL> declare
2    cursor mycursor is select * from t0304 where mod(c,2) = 0 for update;
3    i number := 0;
4 begin
5    for r in mycursor loop
6      i := i + 1;
7    end loop;
8    dbms_output.put_line(i);
9    for r in mycursor loop
10      update t0304 set c = c + 20 where current of mycursor;
11    end loop;
12 end;
13 /
5
PL/SQL procedure successfully completed.
SQL> commit;
Commit complete.
SQL> select * from t0304;
         C
         1
        22
         3
        24
         5
        26
         7
        28
         9
        30
10 rows selected.
SQL>Edited by: Steve Howard on Mar 4, 2011 5:57 PM

How to count the number of wins?

I have a tic tac toe simulator that simulates a game of tic tac toe (obviously). I press the 'play' button, and 1 random X and O is placed in 9 of the labels. Then the application says if X or O wins, or if the game was a tie/no winner. So,
what I want to do is when I click the 'exit' button, I want a message box telling the user how many times X won, O won, and how many ties there were. I am not too sure how to count the number of wins.
-Thanks

Thanks for the reply. I could be wrong, but I do not think that is exactly what I am looking for. Here is the code that I have that determines the winner:
switch (checkWinner())
case 'T':
winnerLabel.Text = "It was a tie!";
break;
case 'O':
winnerLabel.Text = "O Wins!";
break;
case 'X':
winnerLabel.Text = "X Wins!";
break;
private char checkWinner()
char WinnerChar = ' ';
int winning_line = 0;
if (GameBoardCellChar[0].Equals(GameBoardCellChar[1]) && GameBoardCellChar[0].Equals(GameBoardCellChar[2]))
WinnerChar = GameBoardCellChar[0];
winning_line++;
if (GameBoardCellChar[3].Equals(GameBoardCellChar[4]) && GameBoardCellChar[3].Equals(GameBoardCellChar[5]))
WinnerChar = GameBoardCellChar[3];
winning_line++;
if (GameBoardCellChar[6].Equals(GameBoardCellChar[7]) && GameBoardCellChar[6].Equals(GameBoardCellChar[8]))
WinnerChar = GameBoardCellChar[6];
winning_line++;
if (GameBoardCellChar[0].Equals(GameBoardCellChar[3]) && GameBoardCellChar[0].Equals(GameBoardCellChar[6]))
WinnerChar = GameBoardCellChar[0];
winning_line++;
if (GameBoardCellChar[1].Equals(GameBoardCellChar[4]) && GameBoardCellChar[1].Equals(GameBoardCellChar[7]))
WinnerChar = GameBoardCellChar[1];
winning_line++;
if (GameBoardCellChar[2].Equals(GameBoardCellChar[5]) && GameBoardCellChar[2].Equals(GameBoardCellChar[8]))
WinnerChar = GameBoardCellChar[2];
winning_line++;
if (GameBoardCellChar[0].Equals(GameBoardCellChar[4]) && GameBoardCellChar[0].Equals(GameBoardCellChar[8]))
WinnerChar = GameBoardCellChar[0];
winning_line++;
if (GameBoardCellChar[2].Equals(GameBoardCellChar[4]) && GameBoardCellChar[2].Equals(GameBoardCellChar[6]))
WinnerChar = GameBoardCellChar[2];
winning_line++;
if (winning_line == 0 || winning_line > 1)
WinnerChar = 'T';
return WinnerChar;
Do I have to include something extra in here to get the count or no?
The code I posted is the coding in my play button.

How to count the number of instances a record appears in a string

I have a move that imports Name, Department and Site from an
external CSV file, this part I managed to get working after many
weeks. I would like to be able to count the number of instances of
a specific Site “Glasgow” appears in the String. This
way I know how many lines to set.
Also can you add Dynamic text to a rollover button? I can get
the the text to display on the root but not on a button.
I am new to programming and Flash so apologies in
advance.

Those which took time to read carefully *_iWork Formulas and Functions User Guide_* are aware of the availability of wildcard characters.
=COUNTIFI(range;"=text")
will do the trick.
Yvan KOENIG (VALLAURIS, France) lundi 26 avril 2010 17:36:34

How to count the number or rows in file

Hi Experts,
I am file as source and Oracle as target. My file containing the some data which is going to load to the target.
My requirement is that I want to count the number of rows which my file contains. Please help me how to count the total number of rows in file.
Thx,
Sahadeva.

Hi,
You won't give a name DEST_USER_NAME:ODI will get these information.
it is important Command on source and Command on Source side .
-Pls write jython code on Command on Source side
-And Command On Target side Choose technology as Oracle and set logical schema to HR_logical
Sorry my mistake.İt is related jython syntax.Here is code:
import java.lang as lang
import java.sql as sql
import java.lang.String
import os
lang.Class.forName("<%=snpRef.getInfo("DEST_JAVA_DRIVER")%>")
cons=sql.DriverManager.getConnection("<%=snpRef.getInfo("DEST_JAVA_URL")%>", "<%=snpRef.getInfo("DEST_USER_NAME")%>", "<%=snpRef.getInfo("DEST_PASS")%>")
dblinks= cons.createStatement()
file1=open('EMP.txt','r')
count=0
line=file1.readline()
while line !='':
count+=1
line=file1.readline()
file1.close()
sqlQuery = "insert into HR.ETL_FILE_LOG (FILE_COUNT) values (count)"
rqQuery= dblinks.execute(sqlDBLink)
cons.close()
Regards

How to use counters of PCI 6251 to count the number of pulses

Hello,
I have inputs from an optical encoder {pulse train} and i need to count the number of pulses for a short period of time to estimate the speed of the DC motor. Could you please tell me how to use the counters in PCI 6251 DAQ. I found something on DAQ STC, whichs says the input pulse should be connected to PF0 {ctr source}, but i have query where do i get the output {number of pulses counted in a particular period of time}.
Looking for your reply.
Thanks & Regards,
bsnr

Hi bsnr,
Thanks for the post!
In MAX (Measurement and Automation Explorer), if you find the device (DAQmx devices) and right-click, you can select pinouts - which should contain a table telling you which pins are what PFI lines.
Then, in labVIEW, you need to generate some code to use the choosen coutner in a task to count digital edges. If your not sure on this, go to Help>>Find Examples>>Hardware I/O>>DAQmx>>Counters.. and take a look at some of the code provide.
ps. It seems (maybe just your wording), but your expecting the counter output pin to provide the number of counted edges - this isn't the case.
Please let me know what you think?
Kind Regards,
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

How do I get my song count

How do I get my song count? The earlier version showed how many songs you had at the bottom of the screen.

CTRL+/

I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

Type move itunes library into the google serach bar.
It has always been very basic to always maintain abackup copy of your computer. Do you not have a backup copy?

How do I get FCP to count the number of cuts in my sequence?

Similar Messages

Maybe you are looking for