How do I get from ADC to Video

I am hooking up a broadcast monitor to my G5 and the only connection available is the ADC plug on my Radeon 9600. Is there such a thing as an ADC to S-Video or ADC to component video adaptor?
jmf

There may be a way to get this to work.
Apple does have the M9267G/A DVI To Video Adapter. It requires a Mac mini or Power Mac G5 with DVI port.
Apple also sells a ADC to DVI connector cable, search for at the Apple Store. This may not be made by Apple.
Now, you depend on these two cables working in a stacked mode. May work, but someone else will have to answer that one. The requirement for the first item may not be met by the second item. You are on your own.
Other problems may be apparent when/if you try this.

Similar Messages

  • How do I get iphoto to import videos from my iphone 3s? It only imports photos, not videos. My iPhoto is v. 4.0.3.

    How do I get iphoto to import videos from my iphone 3s? It only imports photos, not videos. My iPhoto is v. 4.0.3.

    My iPhoto is v. 4.0.3.
    Is your QuickTime up to date?
    Video importing requires QuickTime 7.6.2 or later.
    http://support.apple.com/kb/HT4083

  • My computer died when I was syncing music from iTunes onto my iPad. I can reset it and get it running, but I want to get back my photos and videos. How do I get back photos and videos in recovery mode?

    My computer died when I was syncing music from iTunes onto my iPad. I can reset it and get it running, but I want to get back my photos and videos. How do I get back photos and videos in recovery mode?

    Clucktastic wrote:
    How do I get back photos and videos in recovery mode?
    Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    See Here  >  http://support.apple.com/kb/HT1808
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • HT4859 i took pictures on my iphone previously before i restored it, how do i get those pictures and videos back

    i took pictures on my iphone previously before i restored it, how do i get those pictures and videos back

    Restore is like wiping hard drive of the computer, to get anything back in that case is only possible if you have backup. If you did create backup, follow instructions here to restore from it.
    iOS: How to back up and restore your content - Support - Apple

  • HT201269 my iphone 5 has been destroyed and wont work or even charge but i was wondering how i could get the pictures and videos off of it to my iphone 4?

    my iphone 5 has been destroyed and wont work or even charge but i was wondering how i could get the pictures and videos off of it to my iphone 4?

    Connect the 5 to a computer and see if it is recognized. If so copy the pictures from phone. If not, you are out of luck.

  • How do I get photos to my video timeline to be blue instead of purple?

    How do I get photos to my video timeline to be blue instead of purple?

    Adjustment Layers should work on video just as on regular Layers.
    Could you please post a screenshot with the pertinent Panels visible?

  • How do I get from Oracle Database 8.1.7.0.0 to 8.1.7.2?

    How do I get from Oracle Database 8.1.7.0.0 to 8.1.7.2? There is a patchset that fixes a bug in 8.1.7 for memory leaks that I need installed. I am currently running on a WindowsNT Server with a Oracle Database version of 8.1.7.0.0. Is going to 8.1.7.2 a complete release upgrade, or is there a smaller upgrade to get there, and how do I get the files required>
    Thanks,

    Hi,
    Sorry for my english
    For Windows NT, the last big patchset is 8.1.7.4.x. I advice you to use the last patchset. A patchet is not a upgrade or a migrate. the installation is in two phase. Phase One:Patch the files in the oracle home with Oracle Universal Installer (Oui) and Phase Two: execute sql files on the dictionnary of each database. There is a readme with the patch.
    you can get files on metalink if you have a account (metalink.oracle.com).
    List bug for Memory Corruption
    8174 1748759 Client memory corruption / dump (eg: in ttcfopr) using pre-fetch
    8174 1859905 Intermittent dump / client memory corruption
    8174 1964934 Memory corruption possible using INSERT /*+ APPEND */ over DBLINK
    8174 2126096 Session heap corruption from LIKE :bind ESCAPE '/' if :bind ends in the escape character
    8174 2152752 Memory corruption / OERI:17182 possible fetching CHAR from DB2 over HS
    8174 2217159 13 byte PGA corruption possible using SQL over DBLINKS from PLSQL with MTS to V7 database
    8174 2248904 Memory corrupt possible during optimization of distributed query
    8173 1836101+ Memory Corruption from distributed query / query with binds (OERI:17114/17xxx/dump in kkecdn/kgh*/kke*)
    8173 1542218 Heap corruption (OERI:17182/dump in kghfrf) using very large collections
    8173 1661786 OERI:12261 / single byte memory corruption possible for CALL type triggers
    8173 1711803 DBW & users may CRASH under heavy load on multi-CPU system with FAST_START_IO_TARGET set > 0
    8173 1744786 Cursor work heap corruption from CONNECT BY PRIOR
    8173 1752554 OERI:17182 selecting DB2 DATA TYPE of CHAR over HS
    8173 1791258 CONNECT BY on IOT can cause SGA memory corruption
    8173 1810829 Lightwieght sessions (via proxy connect) may dump / corrupt shadow memory if users have >1 ROLE
    8173 1847583 Client memory corruption/dump using large value_sz for OCIDefineByPos with OCI_DYNAMIC_FETCH
    8173 1968635 OERI:KCOAPL_BLKCHK / buffer cache corruption from CR rollback
    8173 1987654 Compiling a PLSQL block with an INDICATOR clause can corrupt memory
    8173 1995026 OERI:17112 / heap corruption from Oracle Trace with MTS & Large Pool
    8173 2002799 Wrong results / heap corruption from PQ with aggregates in inline view
    8173 2048336 OERI:150 / Memory corruption from interrupted STAR TRANSFORMATION
    8173 2065386 Mem. Corruption / OERI:KGHFRE2 / OERI:17172 possible using bitmap indexes
    8172 1365873 OERI:17182 / CGA corruption with CURSOR_SHARING=FORCE
    8172 1373920 Memory corruption from PLSQL ORA-6502 errors
    8172 1447610 DBMS_SQL.BIND_ARRAY may dump / report private memory corruption type errors
    8172 1679690 Buffer cache in memory corruption (OERI:2032) can lead to permanent data/index mismatch (OERI:12700)
    8172 1732885 oeri:[KDIBR2R2R BITMAP] / memory corruption possible from BITMAP AND
    8172 1763408 RPC between 9i <-> 8i with CHAR data can corrupt memory
    8171 1227384 SGA heap corruption using DBMS_SQL under heavy load (Rare)
    8171 1364542 Buffer Cache corruption possible (rare)
    8171 1394565 PROBE: Callheap corruption printing a RAW in PLSQL debugger
    Bye !!!
    Cordialement
    XsTiaN

  • Thanks for your help Ortho_fan, but how do I get from that webpage to clicking 'always deny'?  Ta.

    Thanks for your help Ortho_fan, but how do I get from that webpage to clicking 'always deny'?  Thanks.

    RE: 
    Thanks for your help Ortho_fan, but how do I get from that webpage to clicking 'always deny'?  Ta.
    May 25, 2013 1:19 PM
    Thanks for your help Ortho_fan, but how do I get from that webpage to clicking 'always deny'?  Thanks.
    You're referring to the answer I provided  here -- http://forums.adobe.com/message/5352087#5352087
    I'm not quite sure I understand your question, but I'll give it a try.
    To get to the page where you make the "always deny" setting change, simply click on this link:  http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l
    After the page comes up, you can do the following:
    If all you want to do is deny sites from storing Flash content/information on your PC, then you're done.  Simply exit the page by clicking on your home page, then close out the browser.  When you re-open it, the new setting will be applied.
    If you want to allow sites to store Flash information or cookies on your PC, do the following:
    Hope this made sense.
    Ortho_Fan

  • I have bought an iPad 2 recently but when i open itunes, i only have 3 buttons. (downloads, itunes U, podcasts) how do i get the music, music videos etc. buttons?

    I have bought an iPad 2 recently but when i open itunes, i only have 3 buttons. (downloads, itunes U, podcasts) how do i get the music, music videos etc. buttons?

    Reinstall iOS via iTunes on your computer.

  • HT1338 how do i get from OS X 10.5.8 to mountain lion?

    that's the whole question. how do i get from 10.5.8 to mountain lion?

    Assuming you're in the United States:
    1) Make sure your machine can run Mountain Lion:
    Your Mac must be one of the following models:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    2) Purchase a copy of Mac OS X Snow Leopard by calling Apple at 1-800-MY-APPLE. If they do not have it available, try Apple Customer Service at 1-800-676-2775.
    3) After you've installed Snow Leopard, update to Mac OS X 10.6.8.
    4) Purchase Mountain Lion from the App Store.

  • HT1444 have os x 10.5.8 how to i get from there to the new mountain lion

    have os x 10.5.8 how do i get from there to new mountain lion

    Check your system capabilities.
    SL just needs an Intel processor and 1 GB RAM.
    Lion only needs Core2Duo processor ans 2 GB RAM.
    These are ML requirements: http://www.apple.com/osx/specs/

  • How can I get from OS X 10.6.8 to OS X 10.8?

    How can I get from OS X 10.6.8 to OS X 10.8?
    I have a 2ghz intel core 2 duo
    4gb 667 mhz DDr2 SDRAM
    I need to download Itunes Producer and It looks like I might not even be able to do it on this machine?
    any help is appreciated, thanks

    Open the Mac App Store and try downloading Mavericks. If you get told it's incompatible, so is Mountain Lion.
    Back up your data before upgrading. Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
    (109229)

  • How do i get refunded for a video that i didn't want or wrongfully and that isn't downloaded yet?

    how do i get refunded for a video that i didn't want and which hasn't been downloaded yet?

    You don't.
    There are no refunds.
    Sorry.
    You can try contacting itunes support and asking for an exception, but they are under no obligation to allow.

  • Hi I'm new to Mac & I have bootcamp on it but am stuck, how do I get from Mac side to the Window side?

    Hi I'm new to Mac & I have bootcamp on it but am stuck, how do I get from Mac side to the Window side?

    Hold the "option" key on boot.  Choose the system to boot.
    Then "System Preferences > Startup Disk" to select Max OSX as your default system.
    There is another "system preferences" in the Windows menu that is added by bootcamp to make it the default, but I do not know the details of that.

  • How can i get my photos and videos back after backing up from my 2nd generation ipod into my 5th generation ipod? I really need those photos but i dont know how.

    I downloaded the new itunes. So, i plugged in my 5th generation ipod and when i plugged it in, it asked me if i want to set it as new ipod or back up from the 2nd generation ipod touch that i plugged in before, i accidently clicked on the back up from before so it when its done, it looked like my 2nd gen. ipod and i dont like it. All my photos and videos from 5th gen. Ipod were all gone and there are some pictures that i really need as soon as possible. Is there a way i can i can get those photos and videos back? I really need them. :(

    Did you fail to import them to your computer?
    If so, then they are gone.

Maybe you are looking for

  • 4 Questions RE:  iPod Click Wheel 40 GB (HP-Refurb)

    Hello All- I just connected my 40 GB iPod Click Wheel (HP Refurb.) and am a newbie to the world of ipod. I am using iTunes 4.6 & Mac OS 10.3.5. (I haven't upgraded to iTunes 6 on purpose because I thought this older version would be better suited to

  • ABAP MAPPING CHALLENGE  IN XI

    I need to split messages depending upon the message area.I have already created ABAP mapping class that creates one big file in the output.However now I need to split the messages into different files according to Business Area. Is it possible that I

  • What is serialization? and how to implement it?

    what is serialization? and how to implement it?

  • ZFS pool frequently going offline

    I am setting up some servers with ZFS raids and and finding that all of them are suffering from I/O errors that cause the pool to go offline (and when that happens everything freezes and I have to power cycle... then everything boots up fine). T1000,

  • Customer Credit Memo for Allowance

    Hi Guys, This is my client senario: My Client would like to be able take allowances off invoice for Koreian Customer a sold to account.  They are regulated by their bank against taking deductions on invoices, so they would have to pay invoices in ful