How do I get gallery images to display properly in...

Any pictures that are in portrait mode are shown with the top and bottom cut off

OK, I found what seems to work. That is to open the actual ppt version of the download (not the one that had already been opened & saved in Keynote) in Open Office. So I had to open Open Office & then navigate to the file to open it so that it didn't open in Keynote.
At a One to One training on Keynote where I asked for help with this today he noted that it showed that the presentation had been created in an older version of PowerPoint--apparently 2003 for Windows which could explain some of the issues.
Opening it in Open office it displayed mostly ok. There were 2 or 3 or so slides where I had to tweak horizontal lines between bullet points that had crept up so some where through the text rather than under it. So I just selected the lines & nudged them into position.
Its not perfect & for some reason, some of the lines seem a hair thicker than others (which I guess I could go back & figure out how to use the line thickness tool to adjust, but think I will leave well enough alone for now).
As near as I can tell, this seems to work about equally well doing this on the Mac side or in Parallels in Windows 7. So will stick with the Mac side.
This allows me to run the slide show with me controlling when the different bullet points, etc display. It didn't have any exotic animations or transitions--just rather plain vanilla ones.

Similar Messages

After i reading bytes ,how do i get the image to display?

After i reading bytes ,how do i get the image to display?
i m lost after tis step:
Image img=Toolkit.getDefaultToolkit().createImage(data1);

You can create and use a Canvas. (and define the Paint method)
Canvas c = new Canvas(){
public void paint(Graphics g){
g.drawImage(img,0,0,this);
frame.add(c);

How do i get an image to display????

this is some code that i have developed to try to get an image to display. i realize that the arrays for images and sources aren't needed but i want to provide room for when i animate things. but i need to get them to display first. what am i doing wrong?
import java.awt.*;
import javax.swing.*;
public class animate extends JFrame implements Runnable {
Thread runner;
int current;
Image img[] = new Image[1];
String[] source = {"thing.gif"};
     public animate() {
          super("animate");
          setSize(210,210);
          setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          JPanel pane = new JPanel();
          pane.setBackground(Color.white);
          show();
          Toolkit kit = Toolkit.getDefaultToolkit();
          for(int i = 0; i < img.length; i++) {
               img[i] = kit.getImage(source);
     if(runner == null) {
          runner = new Thread(this);
          runner.start();
     public void run() {
          while(true) {
          current = 1;
     public static void main(String Args[]) {
          new animate();
     public void paintComponent(Graphics comp) {
          Graphics2D com = (Graphics2D)comp;
          if(img[current] != null)
               com.drawImage(img[current],0,0,this);
com.drawString("hello",0,0);

Is that the exact code you're trying to run?
It won't work for several reasons but I'll limit my response to just answering your question. Don't use paintComponent, use paint.
public paint( Graphics g )

How do I get PowerPoint presentation to display properly without having PowerPoint?

Suggestions on how to get PowerPoint presentation to display properly aligned on MacBookPro? These are available for download as ppt, pps & pdf
Our co just came out with new presentations in PowerPoint. They are going toward iPad2, & suggest using Documents to Go on an iPad. But I'm trying to play the presentation on my MacBookPro 13" (April 2010), Snow Leopard. I have iWork & so it opens in Keynote which does not display it quite right. The alignment is off--it appears that the relationships between text boxes isn't quite the same. So there is a long table with arrows pointing to the totals at the bottom but the arrows are over the text.
I tried looking at it in Parallels 5 (Win 7) & it opened in Open Office. That looked better, but several slides aren't aligned right. They have horizontal lines between bullet points & the lines "creep" so that as it goes down the page the lines move up closer to the text & then on top of the text.
Not real up on PowerPoint or Keynote, but I'm guessing maybe the resolution or something is different that throws the alignment off. I am learning Keynote but had just dabbled with PowerPoint & of course had played slide shows created in PowerPoint that had been sent to me which usually didn't have as much text. Also if its just me looking at it, I can manage if it isn't lined up right, but to show to others, it needs to look
I need these to display properly since this is something to use with prospective clients. Also the presentation is designed so that different offices can select which slides they want to use. Our office is not using all of them. So I need to be able to select the slides as well as have them display properly.
Wondering if I could choose a power point reader with the pps to play it rather than having Keynote if that would work, but not sure how to do that.
I think the pdf displayed properly, but don't think I can select slides with that.
So how can I be able to select PowerPoint slides, & get them to display properly? At 1st I thought it might be that I didn't have the font used, but it shows as Trebuchet MS which also shows in my font list on the mac side.
I would prefer not to have to buy PowerPoint & would prefer to not have to use Parallels or Bootcamp, although I can if needed. I purchased Outlook 2007 for Windows which I used to use to sync with my old Win mobile phone. thankfully I was able to get rid of that & get an iPhone & now use the iLife aps rather than needing Outlook.
Also related to this presentation are related files that can be downloaded in either mp3 or mp4. I really don't know what the difference is or why choose one or the other.
Message was edited by: KathiMR

OK, I found what seems to work. That is to open the actual ppt version of the download (not the one that had already been opened & saved in Keynote) in Open Office. So I had to open Open Office & then navigate to the file to open it so that it didn't open in Keynote.
At a One to One training on Keynote where I asked for help with this today he noted that it showed that the presentation had been created in an older version of PowerPoint--apparently 2003 for Windows which could explain some of the issues.
Opening it in Open office it displayed mostly ok. There were 2 or 3 or so slides where I had to tweak horizontal lines between bullet points that had crept up so some where through the text rather than under it. So I just selected the lines & nudged them into position.
Its not perfect & for some reason, some of the lines seem a hair thicker than others (which I guess I could go back & figure out how to use the line thickness tool to adjust, but think I will leave well enough alone for now).
As near as I can tell, this seems to work about equally well doing this on the Mac side or in Parallels in Windows 7. So will stick with the Mac side.
This allows me to run the slide show with me controlling when the different bullet points, etc display. It didn't have any exotic animations or transitions--just rather plain vanilla ones.

On a Mac (10.6.4), Firefox asks to download/save any websites with an .asp extension. How do I get these sites to display properly?

Any website that uses the .asp suffix will not open within the browser. Instead, firefox asks to download the website. If I choose to open the .asp file with firefox in the download prompt, I end up in a loop of asking to download/open. The asp websites work fine in Safari.

What's the error? You can also try the https://www.eff.org/https-everywhere extension

New "Photos" is a piece of JUNK! How do I get my image numbers to display as imported like they used to? Can no longer make Events or view old events as before either.

How do I get my image numbers to display as imported like they used to? Can no longer make Events or view old events as before either.
If this is replacing Aperture and previous iPhoto it is USELESS...WAY fewer options for editing available. New "Photos" is a piece of JUNK!

Hi.
I have just migrated my library from Aperture to photos. All seems to have gone smoothly, except for one thing. All of my photos are 'untitled', whereas in both Aperture, and previously iPhoto, the filename was used for the title. If I hit CMD+I and get info, the title is still there as the filename, as I use the filename for all titles.
Is there a way to batch copy all filenames as photo titles, this was done automatically in Aperture and iPhoto, as when photos were imported the filename was used automatically.
Any help appreciated.
Thanks.

How can I get the image width and height stored in database?

Hi!I write s servlet to display images store in database.but how can I get the image width and height?

Have you tryed using PJA or a similar library?
I presume you get java.lang.NoClassDefFoundError on the line :
Toolkit.getDefaultToolkit();?

How do i get itunes 11 to display my album art while in list mode like it did in the previous version?

How do i get itunes 11 to display my album art while in list mode like it did in the previous version?

I think the Sidebar preview image is gone. But found that when I'm playing music either from the entire library or a playlist you can click the tiny thumbnail at the top to open a Artwork based player that is scalable. Reduce (minimize) the main Itunes window and the player is actually Nice. Hope that helps.

How do you get album art to display in N95 player?

As titled, on the N95 8GB, how do you get the image art work of a file/song to display? Thanks

To > pescaglini
I've got the best method for album art without using any jpegs from the phone.
Follow these steps;
1. Download & Install Easy CD-DA Extractor v11.0 (30-Day Trial). This software is amazing & its worth paying for...and if u get other version above v11.0 album art will NOT work !
Download Link: http://rapidshare.com/files/120267020/ezcddax11.exe.html
MODs dont worry it 30-Day Trial
2. Run Easy CD-DA Extractor v11.0
3. Select the “Audio Converter” Tab & drag your files that you want converting.
4. Now edit your audio files tags such as Genre, Artist, Album etc
5. Highlight all your music files & click on the “Additional ID3” tab.
6. You have two options either to Download Album Art off the Internet or Load the
image from your PC. For this guide I am going to use an Image that is saved on my PC.
7. Select Your Encoding Method eg MP3 Lame, AAC+, eAAC+ etc
8. Then Press Convert Button & presto u get album art
Alternativly if you want a Guide with Screenshots then I've made this guide, remember the guide came from me ...
Download Link: http://myfreefilehosting.com/f/fe3a3b0784_1.18MB
If you find my post useful then click on
Kudos!Nokia N96 (v20.050 / RM-247)
www.shaysoft.net | Competitions!

HT5219 How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

You may need to set the slider at the upper-right corner of the Control window to something other than the extreme left-most position:
Hope this helps.

How can we get the image which is stored in clipboard by labview, is there any functions available like text from clip board

How can we get the image which is stored in clipboard by labview, i can get the text in clipboard by using invoke node directly.but i cannot get the image, is there any functions or vi available.(image is in Png format)

The Read from Clipboard method is, unfortunately, limited to text. If the clipboard contains an image then you need to use OS-specific functions calls. This is an example program for Windows. It's old, but it should still work.

I have an ipod touch 2 and rebuilt my laptop. Reinstalled ITUNES and can't find my applications on ITunes after login. I tried to activate Itunes again but it didn't. How can I get my applications to display on ITUNEs?

I have an Ipod Touch 2 and rebuilt my laptop. Reinstalled ITUNES and can't find my applications on ITunes after login. I tried to activate Itunes again but it didn't. How can I get my applications to display on ITUNEs?

It sounds like you essentially have a new computer and unless you restored from a backup your iTunes library would be empty. You can transfer your iTunes purchases from your iPod to the computer by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
SInce you changed syncing computers. after you move the stuff you need to restore the iPod to factory defaults and sync the stuff back to your iPod. If you had the iPod backup file you could restore from backup.
If you have non-iTunes pruchases you can copy them to your computer by using one of the third-party programs discussed in this previous discussion:
Best iPod to PC

How do I get a 0 to display when a count = 0 (zero)? (The cell is blank)...

(Running Business Objects Release 2 (Web-I), No other reporting modules)
How do I get a 0 to display when a count = 0 (zero)? (The cell is blank)...
In my reports, I count the number of tests of one of our products and another count on the number of failures. I then use a simple formula to give me the defect rate percentage (DR%)
The universe objects used in the calculation are:
Assembly Number (dimension)
Human Sn (dimension)
Test Code Description (dimension)
I created a variable (called [Count Assys]) that counts the number of Assemblies Tested:
Formula: =Count([Assembly Number];All)
Another variable (called [Failed Count]) counts the number of failed tests:
Formula: =Count([Test Code Description];All) Where ([Test Code Description] <> "FUNCTIONAL TESTS PASSED")
NOTE: There is a "not equal to sign" between [Test Code Description] and "FUNCTIONAL..." above, but the forum is blanking it when I preview the message. Not a big deal, but it may be important for someone looking to help...
I then have a third variable called [DR%] that divides [Failed Count] into the number of [Count Assys], which yields a number formatted as a percentage.
Formula: =[Failed Count]/[Count Assys]
The above works great!
The problem is: when I have a zero defect count (everything passes), the cell is blank, so the percentage variable remains blank. I want a zero (0) to appear if nothing failed so the percentage appears as 0%
I've searched this forum completely and have tried several Properties changes and different variable strings (like =If([Failed Count]<1,0) and the cell stays blank and cannot come up with an answer.
This one seems simple to me, but everything I've tried has yielded zero <smile> results.
Thanks,
Charles
Edited by: Charles Norman on Dec 9, 2008 12:44 PM
Edited by: Charles Norman on Dec 9, 2008 12:47 PM

Hi Charles,
Use [Dr%] Variable formula as =if(IsNull([Dr%]);0;[DR%])
Here IsNull returns the Boolean value of variable [Dr%] if its true then inserts 0 else the percentage values of failed tests based on the total number of assembly tests performed.
I Hope this is what you want to achieve....
Thanks....
Pratik

How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

If you do Cmd+Shift+3 you'll get a full screen image saved to your desktop as a jpg file.
Also, you can use Cmd+Shift+4 and you'll get a cursor which you click+drag to draw a box. When you release the drag the boxed in area will be saved to the Desktop as a jpg file.

How do I get an image next to my link on facebook or linkedin?

How do I get an image next to my link on facebook or linkedin?
Cheers, Joakim

Make sure there are images on your page.

How do I get gallery images to display properly in...

Similar Messages

Maybe you are looking for