How do I get IE 11 to open in the same window on the task bar?

How do I get IE 11 to open in the same spot on my task bar. i.e. IE 11 is on my task bar. When I open it, it opens in a new place on the end of the task bar. Microsoft Outlook, Windows Explorer, Quicken, Adobe, etc,, all on the task bar open
right at there location on the task bar; not in a new place at the end of the task bar.
How do I get IE 11, Windows 7, 64 bit to open at the same place as the IE icon???
Thanks

Hi,
Seems a strange issue, How about un-pin IE from the taskbar, then re-pin it to the taskbar for a test?
If doesn't work, I suggest you turn off IE 11 in "Turn Windows Features on or off", reboot PC, then re-turn on, check the result again.
Regards
Yolanda Zhu
TechNet Community Support

Similar Messages

How do you get a topic to open in a custom window when accessed from the index?

I right click on an index key word and open Properties. There is only one topic associated with this key word. I click on the Advanced tab, select the custom window that I created. Click OK, compile, etc.
When I try to access this topic from the index, it still opens in the default pane. When I access it from the TOC, it opens in the custom window. How can I get the topic to open in the custom window from the index?
Thanks!
Sue

Hello,
The link might not work in Preview (When the option to open link in new tab is checked) however it will work if you do a File>Preview page/site in Browser.
Muse Preview has only one tab and cannot open another tab/window which is why this functionality does not work in Muse Preview. but works in preview in Browser and in published site.
Regards,
Sachin

How do you get a merged CHM to open in the same window as the master? (RH8)

We have a problem where everytime you click on a topic from a merged CHM in the master TOC, it opens a new window exlusive to the chm where the topic resides. We have more than one master chm and this is the only one that does it, it is also the only one that was created from RH8, although the others have been updated with RH8. We've compared the Window and SS Layout properties with a parent chm that doesn't behave this way and haven't been able to find any differences. Is there something we can do to have all the topics whether merged or from the parent, open in the same window?

I think somehow the last time I had this problem I stumbled on a solution and wasn't sure what fixed it, but the problem reared its head again, and it was back to the drawing board. Now I think we have a solution, but we don't know for sure what created the problem. Although we're pretty sure the problem has something to do with creating a new window when there is already and existing window.
What we found. This problem couldn't be fixed in the SSLayout. We found that the Properties | Advanced | Window setting for individual topics in the TOC had been erased. This Window drop-down selection lets you choose a window other than <Default> if more than one window exists. If not changed by the user, it should stay at <Default>, but somehow the setting was blank on several topics, probably due to the creation of a new window, and maybe some other values being changed. This is probably a bug in RH8, but I don't know about other versions.
How to fix it.
First you have to isolate which merged .chm file (child) has the problem, I believe I did this by removing one child .chm at a time from the Parent project and then seeing if the parent .chm worked correctly after generation.
Once you've found the offending .chm (there may be more than one), open the project and the TOC for the .chm that is a problem.
Go to the TOC pod > Topic Page Properties (right-click on a Topic in the TOC and select Properties) > Advanced > Options panel and ensure that a value exists in the Window: field. If the field is empty, you have a problem. Click the drop-down and select <Default>, even if your .chm window displays in drop-down.
I don't believe there's an option to set a window as the default when you create it, so if there's more than one window, who knows what the <Default> option is drawing from, unless <Default> points to the window you have selected in the SSLayout, which I think is the case.
Find all Topics that have this problem and fix them. Note: you cannot fix this by going to topic Properties in the Topic List (or from r-click Properties in a topic), you have to do it in the TOC.
Save all changes, generate the child .chm, and then replace the old child .chm with the new one.
Open the parent .chm and check to see if all topics open in the parent window. Your Done

Need to open the iview in the same window using the navigateObsolute method

Hi Guys,
Iam facing a problem using the Navigate Obsolute method. I want the target iview to be displayed on the same window rather than the seperate window. For this I have selected the WDPortalNavigationMode as SHOW_INPLACE. Still the target iview is displayed on different window.
The code I have written is
WDPortalNavigation.navigateAbsolute("ROLES://portal_content/com.accenture.Radar/com.accenture.radar.ProjectsIView",WDPortalNavigationMode.SHOW_INPLACE,WDPortalNavigationHistoryMode.NO_DUPLICATIONS,(String) null);
Could someone help me out.
Thanks,
Suvarna.

Hope this will help you:
=========================================================
Defining WorkProtect Mode Centrally
You can change the following settings:
· Standard navigation behavior for unsaved data in portal applications
· Personalization by the end user
· Appearance of the newly opened window if WorkProtect mode is active
1. Choose System Administration ® System Configuration ® Service Configuration.
2. Choose Portal Catalog ® Browse.
3. Navigate to the epcfloader portal service and change to edit mode.
The epcfloader service file is in subfolder Services of application com.sap.portal.epcf.loader.
4. Define values for the following properties:
Property: workprotect.mode.default
Value     Meaning
1           Protect unsaved data by opening a new browser window (standard setting)
2           Unsaved data is lost
3           Required behavior can be selected each time the popup appears
Property: workprotect.mode.personalize
Value     Meaning
on         End users can personalize the behavior.
off         End users cannot personalize the behavior.
Property: workprotect.window.features
Defines the appearance of the newly opened window.
Possible values are all the commands accepted by the JavaScript function window.open, such as toolbar=no, location=no
5.      Choose Save.

Anyone know how open slideshow in the same window?

Does anyone know how to make the slideshow open in the same window as the as the site instead of a new window? I'm looking for the location and code that would make it happen on a .mac site.

Yes, of course, you can do this! You just have to know the address for the slideshow page directly....
http://web.mac.com/username/iWeb/sitename/photopagename_files/slideshow.html
username = your .Mac username
sitename = your site name
photopagename = whatever you named your photo template page
Example:
http://web.mac.com/jwtseng/iWeb/kate/art_files/slideshow.html
Once you find this URL, then all you have to do to get it to appear as part of your page is to specify an iframe tag with the URL...
<iframe src="http://web.mac.com/jwtseng/iWeb/kate/art_files/slideshow.html" width="980" height="760" scrolling="no" border="0" style="border:none;" frameborder="0"></iframe>
This is the little bit of code that you will need to insert into your iWeb pages in order to make the slideshow appear "inside" a frame on the page. Just change the underlined URL to your own slideshow URL.
To prepare the page in iWeb, you'll need to make a textbox on a page that is 980x760 in dimension (you'll need to adjust the default width of the page). Then type in some placeholder text, like "SLIDESHOWHERE". Publish the page. Then go into your iDisk/Web/Sites/iWeb/sitename folder and find the pagename.html file. Open it with TextEdit (make sure to tell TextEdit to "ignore rich text format"). Then find the part of the code where your placeholder text is. Replace the placeholder text with the iframes code. Then save your work.
When you check your page in Safari, you should see the slideshow appear inside the page exactly where you positioned the textbox in iWeb.

How to open another iView in the same window

Hallo,
I user following code for opening iView:
String iView = "http://server/irj/portal?NavigationTarget=ROLES://portal_content/example";
          this.getForm().addRawText("<SCRIPT>\n");
          this.getForm().addRawText("EPCM.doNavigate('" + iView + "',"
                         + "'1',"
                         + "'toolbar,menubar,resizable,scrollbars',"
                         + "'',"
                         + "'',"
                         + "'',"
                         + "''"
                         +
                    //","+
                    ");\n");
          this.getForm().addRawText("</SCRIPT>");
... but this open iView in new window. I'd like to open iView in the same window as the primary iView.
Best Regards,
Josef Motl

Hello all:
And... How could I show some i-views with another contents in the same page, like this?
photo
IVIEW
photo
IVIEW
Thanks,
Alejandro.
P.D.: Excuse my poor English.

How to setup the web inspector to open in the same window not in a new window?

Hello!
I update my mac os to Lion now when i use the web inspetor it's open in a new window ,... I want to open web inspetor in the same window at the bottom...
Somebody help me please!!!
How i do this?
Thank you

See:
*http://kb.mozillazine.org/browser.link.open_newwindow
*1: current tab; 2:new window; 3:new tab;
For links opened via JavaScript you can look at this pref:
*http://kb.mozillazine.org/browser.link.open_newwindow.restriction
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config

How do I set Firefox to open items in the same window instead of a new tab or window?

I want to be able to open items (such as click on the results of a search) and not have it open in a new tab or window, just open in the same window (as the search results).

See:
*http://kb.mozillazine.org/browser.link.open_newwindow
*1: current tab; 2:new window; 3:new tab;
For links opened via JavaScript you can look at this pref:
*http://kb.mozillazine.org/browser.link.open_newwindow.restriction
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config

How to open BSP in the same window of WD?

Hi,
I have a WD that I would like to link to a BSP.
I added a link and put the relative path to the BSP.
Once I click on that link, the BSP is opened in a new window.
I want the BSP to open in the same window, replacing the WD.
I tried putting in the TARGET of the link: '_self', frame name and more but it does not work.
(BTW, I am trying to call SRMSUS BSP).
Any ideas?
Thanks,
Itay

You need to use an Exit Navigation Plug instead:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/ca3351508f04e7e10000000a42189c/frameset.htm

Open a URL link in the same window as SWF file in indesign CS5

Hello,
I am trying to create a SWF file using indesign CS5. I have created buttons and placed in URL links but they always open another window. I would like to know if there is a way to have the URL open in the same window that the SWF file has been created. I tried, putting "_self" to target it in the URL bar, but nothing works.
Thanks in advance
TK

Okay, I found the code but I can't get it to work locally. If you have a web server maybe you can upload the files (swf and html) after you Publish them:
import flash.net.URLRequest;
import flash.events.MouseEvent;
var myURL:URLRequest = new URLRequest ("http://www.google.com");
testlink.addEventListener(MouseEvent.CLICK, clickText);
function clickText(myevent:MouseEvent):void {
navigateToURL(myURL, "_self");
you have to have on the stage a link element called "testlink" (see the code above) which would be a Movie Clip with the label testlink. It can be anything from InDesign: a button, a rectangle, a circle, a graphic, you get the idea. Just select that object in Flash and label it testlink or anything you choose but if you change the name from testlink also change the name in the code snippet where the line "addEventListener" is.

Adobe Reader 9 IE 7 Opens PDF in same window

That's basically my problem. When using internet explorer 7, if I try to click on a PDF link the PDF is opened in the same window as the page I am on. I have the website link target set to blank, so I am not sure what the problem is.
When I click on a PDF link a new window pops open, I click 'Open' on the download prompt box, but then it goes back to the original window and opens on top of the original window.
Any ideas would be greatly appreciated.
Thanks,
Pat

I have some of the same problem
with my Windows 7 64 bit computer. I
get an error when sending a document to
the PDF veiwer and am told to shut down
Adobe Reader. Is there a download to
correct this problem? Adobe Reader 9.3.1
works fine with Windows XP on my 32 bit
computer.

Firefox v29 opens links in same window

Since installing version 29, I have found two seemingly related issues:
1) I find that links open in the same window as the source, instead of a new window.
For example, I get a notification of a newsletter every day in my Yahoo mail account. Prior to v29, when I clicked on the link in the email message to go to the newsletter, it would open in a NEW window (my preference).
With version 29, it opens in the SAME window (and replaces the window where I had Yahoo mail open).
2) Similarly, I do a lot of work where links will be listed in an Excel spreadsheet. Previously, every time I clicked one, it would open a new window. If I clicked on 6, I would have 6 open windows. Now, each link I click REPLACES the last one I opened.
Both of these issues are highly annoying and slow me down.
Is there a setting where I can change this behavior?

I found that after Firefox v29, a LOT of my settings and<BR>
add-ons were changed / reset. Try this;
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
<BR>While you are in safe mode;<BR>
'''''Firefox Options > Advanced > General'''''.<BR>
Look for and turn off '''Use Hardware Acceleration'''.<BR>
Then check ALL of your settings. Browser and add-ons. Then restart.

Planning application url is always opened in the same window?

hi all,
we hava a problem about sts's planning application url.
no matter what url is entered,all the planning application url is always opened in the same window.and the old opened url is covered by the new url.
Is there any solution about this? Can this url be opened in seprate window?
Thank you!
Best Regards,
ma

Hello
I would like to know one thing before answring the question how did you link with an url with the label based menu.
Did you used the opendocument syntax or what did you used.
Another method is why donf you use the URL button and map according to your requirement. place the url button on the menu item and change the properties to tranperancy to 0%.
Thanks
Santhosh V
Edited by: Santhosh Vudarla on Nov 19, 2010 12:05 PM

Open vi in the same window

hello,
is it possible to open an subvi in the same window like the main vi?
for example, if i open a vi by a button click the vi opens in a new window.
in some cases it will be better that the subvi is shown in an specfied area on the frontpanel of the vi.
markus

Hi Markus
Yes this is possible. Use the SubPanel-Control. To learn about it, have a look at the examples. There's a nice one (viewer.vi).
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...

Why firefox in my desktop can't open a new tab in the same windows?

I can't open a new tab by clicking the + symbol. I don't know why this happen. If I want to open a new tab, I have to take a right click and then choosing open new tab. I think this is so terrible, I can't access the page on the same windows.

Uninstall the '''''Ask Toolbar'''''. It can cause that problem.
*http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
*http://kb.mozillazine.org/Uninstalling_toolbars
If that does not solve your problem:
*See --> [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
*See --> [http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
*See --> [http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

How do I get IE 11 to open in the same window on the task bar?

Similar Messages

Maybe you are looking for