How do I get iTunes to scan my media folder and add missing files?

Hi All!!
I recently copied my iTunes library from my macbook to set up iTunes Server on my Sinology NAS. I did this by changing my iTunes Media Folder Location in the Advanced Settings tab, and then consolidating my library. I then changed my Media Folder Location back to my iTunes Media folder on my macbook to be able to play my local media.
However, now my local iTunes thinks some of my library is on my server and doesn't see the local, original file. Whenever I disconnect from the server my iTunes does not locate my local media content (which was not changed or modified during the process). The only solution so far is to individually locate each song. Is there a better way of doing this? Is there a way to make iTunes scan my iTunes Music folder to find the song locations, without duplicating the songs in my library and deleting the play counts/ratings???
I have already tried opening iTunes with the option key held, and selected my local iTunes media folder/library; however, I am still having the same problem
Any help is GREATLY appreciated.
Thank you!
PiotrowskiM

Hi Limnos,
Thank you very much for your prompt response!!
My goal, when I consolidated my files to my NAS, was to create a copy of my library on my NAS to be used for iTunes server, so I can stream the media to my PC's in my house. I did this following an instruction guide made by Synology. However, I did not intend for my macbook to stream media from the server. Ideally I would like for my iTunes in my macbook to just use my local files, which have not been changed/modified.
In summary, is there any way to point my iTunes to ONLY my local files???
Thank you again for all your help!

Similar Messages

  • I have files in my iTunes media folder that somehow are not in my library. How do I get iTunes to scan my media folder and add missing files to my library without making a copy of each file in the same location?

    I have files in my iTunes media folder that somehow are not in my library. How do I get iTunes to scan my media folder and add missing files to my library without making a copy of each file in the same location? If I use add file / folder to library, it scans the folder and then makes a copy of any file that is not in my library in the exact same location; I recal in older versions of iTunes being able to just drag my media folder into my library and it would update missing links.

    Only the songs that are connected to iTunes will be copied when you consolidate to a new folder.
    Splitting the media folder away from the usual location makes it harder to move iTunes in the future.
    Are you go move everything back once you've tidied up or are you going to leave it that way? Either way I'd recommend you create an iTunes folder at the new location, an iTunes Media folder inside that, and consolidate to this new iTunes Media folder. You should also use the option File > LIbrary > Organize Library > Rearrange files in the folder "<Media Folder"> if you have not already done so.
    tt2

  • How do i get itunes to scan my computer for mp3 files

    Hello,
    I just got a new computer and I have all my old mp3 files on my disc.  How do I get itunes to scan my drive and import all my 10,000 songs at one time?

    When you first install iTunes, it offers to do a one-time scan of your hard drive.
    If you miss that opportunity, you can add music at any time using the command File > Add Folder to Library.  That command brings up a dialog where you can navigate to the folder you want to add, e.g. My Music.

  • HT4993 on my computer there are two different accounts for the itunes store but my brothers account keeps syncing in on my iphone instead of my own account how do i get his account off of my phone and add my own back?

    on my computer there are two different accounts for the itunes store but my brothers account keeps syncing in on my iphone instead of my own account how do i get his account off of my phone and add my own back?

    Not a good idead to share IDs
    Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    Read Sharing an Apple ID with your Family
    Does your father have a recent backup of his phone?  If so restore his phone from that.  Please not that everythign created on th ephone since the backup was made will be lost

  • I can't get itunes to scan for media. What can I do?

    I just deleted all the songs in my iTunes for Windows library because there were so many copies of songs and many false links. But when I tried to get iTunes to scan for media anew, clicking on the scan button, nothing happened. In frustration, I finally removed the entire program and reinstalled all over again. But still, nothing happens when I click on the "Scan for Media" button. Can anyone help me? Also, but of less importance, I'd like to tell iTunes where to look for my media, if I can. The scanning is so important because I just bought an iPad and need to sync it with my PC's media contents.

    File > Add Folder to Library, and point it at a folder of music.

  • How do i get itunes to scan my computer for music-multiple user accts

    I want to add music from another user account to Itunes under my userlogin. I can add files one folder/album at a time but that is very time consuming. Is there a way using one command for Itunes to scan the entire harddrive searching through multiple user accounts and add the files?

    In itune 11,
    Type (ctrl + B), this will make the menu bar unhide.
    Then, go to File, SELECT "Add folder to Library"
    A new window will open, and you can drive down to the folder that contain all of the music.
    From that folder, hold SHIFT down and highlight all the folders of the music.
    Then select ok.
    Good luck

  • HT203128 how do I get itunes to sync my outlook calendars and contacts to my iphone?

    ITunes no longer gives me the opportunity to sync my calendars and contacts with Microsoft outlook. How do I get this to work again?

    Hey there clairabelle2807,
    Welcome to Apple Support Communities.
    It sounds like you’ve recently run into an issue syncing contacts and calendars with Outlook using iTunes. The article linked below provides a lot of information and troubleshooting tips that’ll resolve most issues like the one that you’ve described. 
    Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010 - Apple Support
    Take care,
    -Jason

  • How do i get itunes to download on my external, and not my desktop?

    I've been trying to get iTunes to download in my external hard drive instead of on my desktop; but every time I download iTunes it starts downloading automaticly onto the desktop. I don't have enough memory on my desktop to transfer all my music onto their, so how can I get it to download onto the external instead? If anyone could help me with this problem I would really appreceate it.

    Download and install iTunes normally, launch it with the Shift key held down, and create a new library on the external drive.
    (69383)

  • How can I get iTunes to recognize my iTouch? And I can't force restore, error 1611. Help?

    My iTunes does not recognize my iTouch and I want to restore it to factory settings. I am not able to restore due to an error 1611. What does this mean and how can I get my iTouch to work again, currently it won't even start to charge.

    Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
    Above from:
    http://support.apple.com/kb/TS3694#error1611

  • How do I get iTunes to auto-create a folder for newly added music?

    I used to add files into a new folder (literally named "New Folder"), play the songs from the folder (not iTunes), and iTunes would create a new folder appropriate for the artist and album, moving the songs to that new folder. Anyone know how to turn this feature on?

    This feature is usually called "Watch Folders", and iTunes doesn't have anything like that.

  • How do I get itunes tracks to windows media player

    I need help.

    To clarify, do you mean that you want to play tracks from your iTunes music library with Windows Media Player? If so, then they'll have to be in MP3 or WAV format, since WMP won't play AAC.
    If you want to get your tracks from Windows Media Player into iTunes, then Chris's advice will apply. Note, though, that iTunes cannot import or play copy-protected WMA, so if you have any of those, they won't work.

  • How to get iTunes to update artist/album folder names after editing file metadata

    If I edit the metadata for a song, such as the song title, it updates the actual file on my computer as well. However, if I edit the album name or artist name, it does not update the artist or album folders. Is there a way to force iTunes to do this? I have music coming from 3 different sources, Amazon, iTunes, and CD rips, and it's very common for artist names to appear differently from different sources. I'd like to be able to just add everything to iTunes, update any inconsistencies, and then have those changes automaticaly be reflected in my \iTunes Media\Music folder. Is that possible? Otherwise I end up with multiple folders for the same artist.

    Check the option to Keep iTunes Media organized under Edit > Preferences > Advanced.  The Copy files to iTunes Media folder option should also be checked if you want to make sure that all media is stored under the iTunes Media folders.

  • How to copy only part of the music media folder and library to another Mac

    Dear friends,
    I run iTunes in Mac OS. The iTunes music media folder is now located in an external HD because it´s quite large (2T). The problem is that I´got a second Mac and I´d like to copy -in this second Mac, only part of my music using only its internal  HD (300 Mb) . How can I do this copy while preserving art and play-lists?
    Thanks in advance

    tcynk00 wrote:
    how I can transfer only selected pieces of music (all library will not fit anyway)
    that's what playlists are for.
    and how to maintain transfer process in future when I want to change the music on my nano.
    add/delete track to/from the playlist you sync to your device.
    JGG

  • Creating AppleScript That Watches a Folder and Adds New Files to iTunes

    Is it possible to create a AppleScript that watches a folder and automatically adds any new files placed into the folder to my iTunes library?

    Probably. You can take a look through Doug's AppleScripts for iTunes and see if there's anything pre-existing you could use or modify.
    An alternative might be Hazel which says it can do that. It's not free, but if it works it would probably be a lot easier.
    Regards.

  • I have  a partitioned laptop. Itunes automatically consigns movies and audiobooks in the C drive which is close to full. How do I get itunes to work from the movies and audiobooks files in my D drive so that the C drive memory is not compromised?

    I have a partitioned laptop. Itunes automatically consigns files from my D drive to the C drive when I import them. My C drive is running out of space! What commands do I use to ensure that Itunes draws directly from my D drive for high space usesr like movies, podcasts and audiobooks ?

    Quit iTunes.
    Copy the iTunes Folder to the D drive, leave a copy on the C drive.
    Then open the XML file in the C drive in the iTunes folder with a Text editor with "Find and Replace" ability.
    Correct all the partial pathnames so it matches the new location where the iTunes Folder is now.
    Example:
    Find: C:\Windows\Users\Johnny\Music\iTunesFolder...   to
    Replace: D\\Music\iTunesFolder....
    Quit iTunes and transfer all the folders out of the iTunes Folder on C except the two single files, including the XML you edited.
    Start iTunes and click on one song you have but dislike, if it plays your fine. Leave the C/iTunes folders alone to make sure it works for all your content, then finally back it up or delete it to make room on C. Do a Windows defrag on C for increased performance.
    If you get a Explanation Point in iTunes, it didn't find the file and you didn't correct the pathnames correctly..

Maybe you are looking for

  • Both CS6: Trouble exporting to Premiere from After Effects?

    Hello. I'd like to start off by saying that I am new to the community and new to using this software, so please pardon if I come off as ignorant. However, I need help urgently. I am trying to export an After Effects project into Adobe Premiere (using

  • Captilaisation date change

    Experts, I need to change the capitalization date for the asset purchased. That can be done through AS02. Asset purchased on Oct 2008 and the same has to be changed as Sept 2008. Depreciation run for sept and oct 08 already done. Now we need to chang

  • Debug/Trace at individual Composite Level

    Hello All, Morning , need some inputs regards this question. --we are getting the errors mentioned here (ORA-29261 bad argument , ORA-06512 at SYS.UTL_HTTP) while calling the composite (which is a bpel process) deployed on 11.1.1.4 Soa Suite. ---From

  • [Fri Feb  2 12:23:37 2007] [error] [client 68.145.110.39] mod_auth_apple:

    There has been a big issue today with people refreshing, reading and writing to iCal. when I check the server logs, I get: [Fri Feb 2 12:23:37 2007] [error] [client 68.XXX.XXX.XX] modauthapple: Access to /intranet/ical/calendars/General.ics failed, r

  • Universe Filter vs BW Cube

    Hi. I have a problem. I want create one filter to retrieve the last 30 days. I try use: Generate({ClosingPeriod([time].[month]).Lag(11):ClosingPeriod([time].[month])}, {[Time].currentmember.LastChild}) or [Year].[Month].[Day].lastchild.lag(30) But do