How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

Not sure which driver you mean when you say "the driver in the Mac's list". Apple does not provide a driver for this device, so if you mean one of the default printers that are included with 10.6, like the Generic Postscript or Generic PCL, then these will only work if the optional PS or PCL print kits were installed in the machine. Given your inability to print then it would seem that you have neither kit installed. So this would require you to install the Canon UFR2 driver, which you can obtain via this link.
With the UFR2 driver installed, you add the printer using IP > LPD. Enter the IP address of the iRC2380, leave the Queue name blank and change the Name to iRC2380. Leave the Location field blank and in the Print Using menu, browse to the "Canon iR C2380/2550 UFR II (UK)". Click OK and then Add to complete the queue creation. You should now be able to print. Please reply if it does not work.

Similar Messages

I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any availabl

I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any available updates or reinstall IPhoto.
I tried installing Iphoto it said it was downloaded successfully. I still get the error messafe, and can not open any photos of program, any suggestions?

What version of iPhoto do you have on the Macbook and on the iMac? What systems are you running on the Macbook and on the iMac?
Does the message only refer to "a problem" or does it specify what it is?
Happy Holidays

When launching Illustrator on Mac OSX 10.9 I get an erro that the program is no longer supported on PowerPC. I tried moving the plug-ins to a different folder as the Adobe site suggested but no luck. Any ideas how to get this launched again? Same issue fo

When launching Illustrator on Mac OSX 10.9 I get an error that the program is no longer supported on PowerPC. I tried moving the plug-ins to a different folder as the Adobe site suggested but no luck. Any ideas how to get this launched again? Same issue for Photoshop and InDesign

You will need to uninstall, run the Cleaner tool and reinstall you adobe applications. Adobe apps don't take kindly to inplace updates of the OS on Macs.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

TS1394 my friends mac book pro never got an upgrde that allowed her to have the app store on her dock, now I can't help her to upgrade to OSX mountain lion... any ideas on how to do this?? it's driving me crazy!

my friends mac book pro never got an upgrde that allowed her to have the app store on her dock, now I can't help her to upgrade to OSX mountain lion... any ideas on how to do this?? it's driving me crazy!

Bad choice, since the cost is exorbitant. Snow Leopard ($29 USD) is available from its online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.]
Additionally, you can get a MAS redemption code via the same route. See https://discussions.apple.com/thread/4140947?tstart=0 for details.

Since upgrading, both our wireless printers are still visible, but OSX will not connect with them. Both work via connecting from other sources via the same wireless router (airport). What do I need to do to get my printing/scanning working again?

Since upgrading, both our wireless printers are still visible, but OSX will not connect with them. Both work via connecting from other sources via the same wireless router (airport). What do I need to do to get my printing/scanning working again?

First thing to try is reset Printing System:
OS X Mavericks: Reset the printing system
Next would be reset the router (power off 15 secs then back on). And, 2 minutes later, reset the printers 1 by 1.

Fierfox 5 doesn't work with USPS or UPs using OSX and how do I get rid of this annoying Firefox stopped the page from redirecting to another page which is usually the one I want so I have to click "ALLOW" how do I get rid of this option

Using a Imac neither paypal or USPS can figure out why firefox 5 will not print postage. Opera will. If I could switch my bookmarks I'd move firefox to second on the list of browsers I use

etresoft a long time contributer to Apple Support Communities wrote a very useful app he called etrecheck which helps in diagnosing many problems caused by third party installs etc.. Go to his website, read his information and from there download and run the program according to his instructions
http://www.etresoft.com/etrecheck
Post the results back here
Pete

I am running OSX 10.8.3,when i try to open iDVD i get the initial screen but when i try to choose an option all i get is 'Downloading Themes' which just continues. I have left it for over an hour?

I am running OSX 10.8.3,when i try to open iDVD i get the initial screen but when i try to choose an option all i get is 'Downloading Themes' which just continues. I have left it for over an hour?

Where did you get iDVD to put on your Mac? The downloading themes are no longer available from Apple. If you copied it from a Mac that had all the themes look for the iDVD folder on that Mac which should be in the HD/Library/Applications Support folder or the Users/Home/Library/Applications Support folder. Copy it to the HD/Library/Applications Support folder for Mt Lion.
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

Trying to upgrade osx 10.5.8 so that I can use apple tv/facetime etc. mountain lion requires 10.6.8 how can I upgrade my osx? help!

trying to upgrade osx 10.5.8 on my old macbook pro
so that I can use apple tv/facetime etc. mountain lion requires 10.6.8 how can I upgrade my osx? help!
Thank you~

Buy Snow Leopard from the online Apple Store - http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard - and update until you get to 10.6.8. Then, if you're computer is able to run Mountain Lion, you'll be able to purchase ML and install it via the App Store.
Good luck,
Clinton

After upgrading to osx 10.9.3, my external hard drive was not able to mount, but it can be mounted without issue in osx 10.6, how do I solve it? it was formatted by disk utility.

Hi
After upgrading to osx 10.9.3, my external hard drive was not able to mount, but it can be mounted without issue in osx 10.6, how do I solve it? it was formatted by disk utility.
Thanks
PT

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Recovery mode and launch Disk Utility. Is the drive recognized?
Start up in Safe Mode and test.
Reset the NVRAM.
Reset the System Management Controller.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

Can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. help

can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. please help

OK, let's try these................
1 - Boot up from your install DVD and run "Repair Disk" from the Utility menu. When done, restart back to your desktop, repair permissions and restart your computer. Re-connect your printer.
2 - Download & install the Gimp drivers. Make sure the one you install is compatible w/your OS-Gutenprint 5.2.8-pre1. Repair permissions, restart your computer & re-connect your printer when done.
The Epson model I have, in order to get it to print wirelessly, I had to install a Gimp driver.
3 - Check out the following KB Articles:
Mac OS X 10.4 Help: Connecting to a network printer
Epson Printer Drivers v2.10 OS X
Adding a printer to your printer list in Mac OS X
Mac OS X 10.4 Help: The printer I'm adding says "Driver not installed"
======================
If still unsuccessful after trying all of the above, the problem could be your iBook or human error. You can either call Epson & ask to speak with a Mac savy supervisor or return the printer & find another that is compatible w/your current OS.

Been using Macs since classic. Using MBP, OS 10.7.5. Trying to figure out how to print/save folder contents (Name, Date Modified, Size Kind) of entire (non-visible) folder? Any apps that can do this?

Been using Macs since before classic. Using MBP, OS 10.7.5. Trying to figure out how to print/save folder contents including what's not visible on screen (Name, Date Modified, Size Kind) in entire folder?
Screen shots are getting old hat.
Tried select all, copy, paste into pages, but it didn't display date modified, size & kind, and also included images of selected files, which is too large.
Any apps/shortcuts/utilities that can do this? Thanks in advance.

Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry

Since I updated my Mac to OS Yosemite, the scanner on my MX920 no longer works. I just get a questio

Since I updated my Mac to OS Yosemite, the scanner on my MX920 no longer works. I just get a question mark in My Image Garden. It was working fine before the upgrade.
Solved!
Go to Solution.

Hi lalyc,
Reinstalling the printer using the latest drivers from the Canon USA website should get the scanner up and running.
Please click here to go to the Drivers and Software page for the PIXMA MX922. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "RECOMMENDED FOR YOU" section and click on the CUPS driver file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once you have downloaded and installed the CUPS driver file from the website, please also install all other items from the RECOMMENDED FOR YOU and DRIVERS section of the website. To install the rest of the software that comes with the printer, please follow the steps above, except for in step 2 you will want to click on the red arrow next to the "SOFTWARE" section instead of the RECOMMENDED FOR YOU section to locate and download the software.
Once all items have been downloaded, please double-click on each of the items on your Mac to install them. If you plan on using the printer wirelessly, please be sure to install the Canon IJ Network Tool last after all other software has been installed; it should be the very last item installed. Once all items have been installed, please restart your Mac and attempt to scan.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I transferred data from my external hard drive to my restored Mac Book Pro via migration assistant and now my external hard drive in time capsule has red minus signs. How do I get rid of that without getting rid of any of my data?

I used Migration Assistant to transfer my data from my external hard drive via Time Capsule to my restored Mac Book Pro. When I now go into Time Capsule I there are red minus signs in the corner of all the folders that are contained in my back up. How do I get rid of this and access my previous back-ups?

Select the drive and Finder > Get info and at the bottom "ignore permissions on this volume"
You can copy the files, but the ownership on the files still belongs to the other user account, once your done copying, then perform a #6 Reset Users Permissions and that will set all the ownership to that account.
..Step by Step to fix your Mac
Another method is to copy the entire folder, then change it's permissions.

I have a mac book pro. Yesterday the mail app failed to open. I have tried to open it fomr the dock and the application folder but nothing happens. Does anyone have any suggestions to get it to work?

I have a mac book pro. Yesterday the mail app failed to open. I have tried to open it from the dock and the application folder but nothing happens. Does anyone have any suggestions to get it to work?

You don't need iDVD unless you are going to make DVDs. If you are just trying to share files, iDVD won't help you at all.
What you want to do is in iMovie, choose File/Share/File, and export that way. It creates an .mp4 file that should be readable on Macs or Windows.
You could also File/Share/YouTube if you don't mind posting them to YouTube, because of course YouTube videos are watchable by any Mac or Windows computer made in the last 10 years.

How do I automatically log the battery percentage and time on my Retina Macbook Pro to an excel spreadsheet? (OSX 10.9.4)

Hello! So I own a 13" rMBP, and I'm running OSX 10.9.4.
How do I log my battery percentage with the date, probably down to the hour, preferably to an Excel file?
I want to track the rate at which my battery discharges, so that in the future I can compare the present rate of discharge with the past and see exactly how much my battery has deteriorated by. I'll take averages over long periods of time to account for, e.g. the fact that watching Netflix drains my battery faster than editing an essay. I also want a solution that uses negligible power in the background.
I've spent hours looking for an app that both calculates the rate of discharge and keeps all data, but I haven't found any. Eventually I decided that hopefully it isn't too difficult to write an AppleScript or something that simply logs the system clock and battery percentage in tandem every hour or so.
Thank you for your time!
Herman

What Barney said.
Here is the script to create a CSV text file with
Date
Time
Current Battery Percentage as an integer
#!/bin/bash
batterycsv="$HOME/battery.csv"
export GREP_OPTIONS="--color=never"
# if you want the percentage sign too, exclude the second egrep
battpct=$(pmset -g ps | egrep -o "(\d+)%" | egrep -o "\d+")
datetime=$(date "+%Y-%m-%d %H:%M")
printf "%s,%s,%s\n" $datetime $battpct >> $batterycsv
Output on a fully charged MacBook Air to battery.csv will be individual lines of the following format:
2014-08-09,19:49,100

How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

Similar Messages

Maybe you are looking for