How do I get my computer to see an external audio receiver

I have a brand new Mac Book pro and have a Marantz SR4001 receiver. Im using a mini port to HDMI adaptor and have the HDMI hooked u to the HDMI input on the receiver. My computer doesn't see the receiver so it isn't allowing me to run music from myItunes to the stereo in the house. Any ideas on how to fix this issue ?

Make sure to select your recever in Audio Out options, under Sound in System Preferences. If you cannot see your receiver listed, than it is most likely ana adapter issue.

Similar Messages

  • How do I get my computer to recognize my external hard drive

    How do I get my computer to recognize my external hard drive?

    Turning the power on definitely helps!

  • How do I get my computers to see my external hard drive on airport extreme?

    I jus purchased and airport extreme as although he directions say plug and play - it doesn't work.  None of my computers see my external hard drive when it is plugged into the airport.  Cannot locate directions with step by step support.  thank you. Nettie

    The external harddrive is NTFS format and someone from apple told me that it would have to be reformatted to be seen by the Extreme -- Needless to say with 33% of the hard drive filled, I do NOT want to reformat.
    Unfortunately, HDDs attached to the USB port of the AirPort Extreme, cannot be recognized by the AirPort if formatted in NTFS. If you do not wish to reformat this drive, you will either have to use a different drive or connect this drive to a Windows PC for sharing on the network.
    The AirPort can only share drives formatted in HFS+ or FAT32.

  • How do I get my iPad2 to use an external GPS receiver

    I have a Marine Navionics Chart app on my iPad. I have bought an external Blue Tooth GPS receiver. The iPad has recognised the device. I wish to use this to improve the accuracy of my location when at sea. When I have "Location Services" off my iPad does not seem to want to use the external receiver (a GNS 1000 device).
    How can I get it to use this device?

    Make sure to select your recever in Audio Out options, under Sound in System Preferences. If you cannot see your receiver listed, than it is most likely ana adapter issue.

  • I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB.  How can I get my computer to recognize my ipod

    I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB.  How can I get my computer to recognize my ipod

    iPod not recognized in 'My Computer' and in iTunes for Windows

  • How do i get my computer to stop making a fan noise

    how do i get my computer to stop making a fan noise?

    Is the computer hot? If so then do this:
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    If the computer is not hot, then try resetting the SMC - Intel-based Macs: Resetting the System Management Controller (SMC).
    Finally, try running diagnostics:
    Using Apple Hardware Test
    OS X Mountain Lion- Use Apple Hardware Test
    Intel-based Macs- Using Apple Hardware Test
    MacBook Air- Using Apple Hardware Test

  • How do i get my computer to recognise my devise?

    How do I get my computer to recognise my devise?

    - Start here.  It is normal and expecedt for the computer open the an image program wehn an iPod is conncted since that is how one syncs saved photo from the iPod to the computer.
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    - You can try disabling the camera program from opening and see if that helps:
    http://support.apple.com/kb/TS1500
    - Have you installed a camera or scanner program or simlar recently and is that when the current problem started?  If so uninstall that program.

  • How do i get my computer to recognize my computer

    how do i get my computer to recognize my computer

    Hi, edwin5095. 
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the issue persists, try all remaining steps in the article below. 
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Cheers,
    Jason H.

  • How do I get a computer to use one of my available licenses instead of the temporary license that I'm being told will expire tomorrow?

    My console says "Payment needed" on one of my computers, and that the computer is currently using a temporary license, which is set to expire tomorrow. However, the line above that says the I have 2 device licenses available for activation. How do I get that computer to use one of my available licenses instead of the temporary license that will expire tomorrow?
    Thanks,
    RS

    andtrobs wrote:
    Something I have noticed with the iPad that it is possible for webpages to run as if they are in their own app.
    No, what you're seeing is the actual webpage
    For example, the BBC iplayer (www.bbc.co.uk/iplayer). Open this site in safari, add an icon for it to your home screen, then when you use this icon to open the iplayer it opens as if it is an app, it doesn't have the address bar or back and forward buttons etc.
    Actually, it does. Or should do, ay least. It does for me
    Also when you double click the home button the iplayer icon shows up with the rest of the apps (usually you just get safari there) and if you open safari and look at the pages you have open it doesn't show there. It really does look as though it is an app, although what I'm guessing is happening is that it is open in a new instance of safari.
    That's correct
    My question is, does anyone know how to get a site to do this? I'm assuming there are some meta tags in the HTML but I can't find any references to this being possible let alone how to do it.
    The site doesn't do it. Safari does it. All you have on your Home screen is the iPad equivalent of a webloc, a small text snippet containing the URL for whatever page you saved.
    Message was edited by: Michael Morgan1

  • X220 with Intel Series 310 80 GB mSATA SSD (How do you get Win 7 to see drive

    Hi Everyone,
    I am the proud owner of a new x220 with the following spec:
    * i7 2.70GHz
    * * gis mem
    * Bios version 1.21
    * running Win 7 64-bit professional.
    * 320 hd
    I am very proud of my self for installing the Intel Series 310 80 GB mSATA SSD by myself (not very technical).  
    1. If I hit F12 on boot up the drive is available.  
    2. Running Lenovo Think Vantage Tool Box and it sees the Intel SSDMAEMC080G2 drive...
    The question I have is that windows does not see this as a drive from my computer..ect.  My question is how to I get Win 7 to see this drive so I can move my win 7 to it and set as a the boot drive.
    What step am I missing???  Thanks everyone for your help!!!
    Chris

    Hi, guys
    If you whant to use the msata drive as the 2nd drive in the system you've to initialize it.
    For making it bootable the are seveal methods. I've used the next two:
    1. I used Intel Data Migration Software tool (based on Acronis technology) to transfer all image from the stock hdd to the new Intel SSD drive 320 Series (120 gb). At this moment the new drive was plased into the external usb box. Then I've booted from the new drive and resized the partitions using the Disk Management applet.
    2. The second method is to use the factory recovery media (USB stick in my case). I did that for the new msata SSD drive (non Intel 128 gb). Insert the new drive, boot from the usb stick, fully recover, reboot into the bios setup, change the boot priority for the new drive, reboot from the new drive, resize the partitions and delete the Lenovo_recovery partition on the new drive. I'm sure the cloning tool will work for msata too.
    No actions were carried out with the SSD drives (I mean initializing, partioning...) before data migrating in both cases.
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

  • After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?

    I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?

    Hold the Option key down and restart. Select one of the drives that comes up and hit the Return key.

  • I downloaded the new Pages and Numbers through my app store but when I open my old documents, it still tells me my 30 day trial is over. How do I get the computer to automatically recognize the new applications?

    More information: I have a 3 year old MacBook and had been using "Microsoft for Mac" until last week when I took my MacBook in for some upgrades- including the operating system Lion. I have been unable to use the Word, Excel, etc. programs because they are not supported on the new operating system... and I already used my 30 day trial of iWork when we first purchased the computer. I decided to buy Pages and Numbers through the App Store icon. When I open the Pages and Numbers under my Applications, I can get them to work. However, when I open old documents saved on my computer, they go into the 'old' iWork messages of that my trial has expired. How do I get the computer to automatically recognize that I've purchased Pages and Numbers?

    You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
    Yvan Koenig has written an AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip.

  • My ipods are no longer recognized after I installed my Iphone I have 2 ipods that I have music on and still want to use them so how do I get the computer to recognize the ipods again?

    I recently got an Iphone and after I installed it on my computer my 2 ipods are no longer able to sync to the computer how do I get the computer to recognize the 2 different ipods so I can still use them?

    Since you already had two iPod before getting the iPhone, what exactly did you need to "install" to use the iPhone?  Doesn't it use to the same iTunes installation you already used with the iPods?
    So, I guess my question is, what changed on the computer when you started using the iPhone?
    What happens now when you connect the iPod?  Is the iPod still seen in Windows device manager?

  • How do I get the computer to automatically eject a drive before it enters Sleep?"

    I have an external eSATA drive connected via PCI Express card to my Mac Pro.  When I wake the computer, I get a complaint about not correctly ejecting the disk.  How can I get the computer to eject the drive before entering Sleep?  There are two partitions on the drive, so the answer will need to include "Eject All."  Perhaps an Apple Script could tell the drive to eject, but how to automatically run it?  If I could schedule it to run five or ten minutes before the scheduled Sleep, that should work.
    The reason for the external drive is to back up my TiVo recordings...WARNING...If you have a DVR Expander connected to your TiVo and EITHER fails, you lose everything!  I now transfer all my recordings from my TiVos to this drive so I won't lose recordings in the future.  Plus I can take the drive with me and connect it via a Thunderbolt wire and watch them on my laptop.

    Hello,
    http://hints.macworld.com/article.php?story=20120211184732735
    http://irwinkwan.com/2013/06/27/eject-all-mac-os-x-disks-with-a-script/

Maybe you are looking for