How do i get my ipod to work forgot my password

i forgot password how do i unlock it to put new password in ipod touch?

If you cannot remember the passcode, you will need to restore your device on the computer that you Usually Sync with...
Wrong Pass Code Red Screen
http://support.apple.com/kb/HT1212
http://support.apple.com/kb/HT1808

Similar Messages

I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes. I am totally computer useless - how can I get my ipod to work, please? Charles Jones.

I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes. I am totally computer useless - how can I get my ipod to work, please? Charles Jones.

You did install the latest iTunes (10.5) right? If the problem was that iTunes does not see the iPod try:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

How can I get my ipod to work with itunes?

When I connect my ipod classic into my new computer it seems that itunes does not recognize it. How can I get my ipod to work with itunes? I'm afraid to disconnect my ipod because the display is saying Do Not Disconnect.

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

HT201413 I have restored and updated my ipod from recovery mode however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again?

I have restored and updated my ipod from recovery mode, however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again? I have updated and restored 5 times! When connected to itunes it only shows the summary page saying ipod in recovery mode.

Fixed it!
1. Made sure itunes software was up to date
2. Pressed and held 'home' button and 'on-off' button at the same time for about 10 seconds till ipod reset (I hadn't done this step previously)
3. Connected to itunes
4. Pressed restore and update ipod
Update successful and ipod taken out of recovery mode

HT1414 how do i get my ipod to work when all i get is a pic of a usb cable and an itunes logo

how do i get my ipod to work when all i get is a pic of a usb cable and an itunes logo

Connect the iPod to your computer and restore via iTunes.
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad

How do i get my ipod back working

how do i get my ipod back working withmy computer the usb is working in my ipod is just its not connecting i download over 500 songs i really need the music on my device

See Corrupt iPod classic.
tt2

HT1320 how do you reset your ipod if you forgot the password?

How do you reset your ipod if you forgot the password?

I had this problem once,
Connect it with itunes and restore the ipod it has to be your own itunes account other wise the ipod thinks its stolen and it doesn't work.

How do i unlock my ipod. I forgot the password

how do I unlock my ipod? i forgot the password

A Complete Guide to Restore or Recover Your iDevice (or if you forgot your passcode)
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
If you need to restore your device or if you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to
         update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
     1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
         of the cable connected to your computer's USB port.
     2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
         red slider appears, then slide the slider. Wait for the device to turn off.
          If you cannot turn off the device using the slider, press and hold the Sleep/Wake
          and Home buttons at the same time. When the device turns off, release the Sleep/Wake
          and Home buttons.
     3. While pressing and holding the Home button, reconnect the USB cable to the device.
         The device should turn on. Note: If you see the screen pictured below, let the device
         charge for at least ten minutes to ensure that the battery has some charge, and then
         start with step 2 again.
     4. Continue holding the Home button until you see the "Connect to iTunes" screen.
         When this screen appears you can release the Home button.
     5. If necessary, open iTunes. You should see the following "recovery mode" alert:
     6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

HT201304 my ipod was stolen and it says "ipod is disabled,connect to itunes" on screen saver. How would i get my ipod to work again?

My ipod touch was stolen and i got it back.on the screen saver it now says,"ipod is disabled,connect to itunes" what do i have to do to get my ipod touch working again?

http://support.apple.com/kb/HT1212
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Some how i cannot get my ipod to work it is where the apple is there and on itunes it said that i do not have a ipod at all i have a touch

i cannot get my ipod to work i cnnot turn it off or start it it is stuck with the apple on it

- Try resetting the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Try connecting it to your computer and restoring it. You may have to place the iPod in recovery mode. For recovery mode see:
http://support.apple.com/kb/HT1808

HT1212 How can I get my ipod to work if I forgot the password?

How can I get into a ipod touch that I bought from someone who forgot the password?

Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How do I get my iPod to work if I rested it but forgot my Apple ID and Password

I made an Apple ID and a password a year ago. My iPod touch was locked by my little cousin and I couldn't get in it so I rested it but now it is asking me for the Apple ID and Password but the thing is that I remember it. So I made a new Apple ID and Password but the thing is that I can only unlock it with my old one that cannot be found by the Apple program.

You need to recover use of the original ID
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. See Changing your Apple ID password if you'd like more information.

HT201274 After i erased all my content and settings on my ipod touch my screen has the itunes logo with the cable. how do i get my ipod to work again?

After i erased all my content and settings on my ipod touch my screen has the itunes logo and a cable on it. how can i get my home screen back?

Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software

I tried to restore my ipod touch because i forgot the password, but computer says download not complete. How do I get my ipod to work?

My computer will not let me restore my i pod touch. My daughter forgot the password and we have not been able to use it. Someone told me to restore it, I tried and the computer looks like it is downloading for a couple of minutes but then says download not complete.

Try here:
iOS: Device not recognized in iTunes for Windows
Also include manually placing the iPod in Recovery mode and then try a restore
Then try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Further, try another computer to help determine if yu have a compter or iPod problem.

HT1766 How do I get my iPod to work again after is has been disabled because I forgot my password & now I remember it?

My iPod Touch has been disabled because I had forgotten the password. Now I remember the password but can't get the iPod unlocked. I am hooked up to iTunes but can't get it unlock still? What am I doing wwrong????/

1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.

How do i get my ipod to work forgot my password

Similar Messages

Maybe you are looking for