How do I get my mac pro on airplay?

I just bought my Mac Pro and a Apple Tv box. How do I get my Mac to show on Airplay? I see nothing in the manual for it.

The Mac Pro does not have the hardware needed for AirPlay but you may want to try Beamer
<http://beamer-app.com>

Similar Messages

Hello - how do i get my mac pro to print in colour

Hello - how do i get my mac pro to print in colour - i am using HP Envy 120 and can not print in colour. when testing the printer, the printer prints in colour, but trying to print from the mac book pro - it prints in black and white. i can't find an option that

I know nothing about your printer. However, to use it properly you must Add the printer in Print & Scan preferences.
See OS X Mavericks- Set up a printer. Also, consult the printer's user manual. With the proper setup the printer should print color or b/w automatically. If you have further problems you need to start with the printer HP's tech support.

How do I get new Mac Pro to "find" my HP LaserJet 1200n?

I have been using my HP LaserJet 1200n with my G5. The ethernet cable from the printer is plugged into my Airport Extreme Base Station. On the G5 I have checked the box "Share this Printer", and its location is given as "Local Zone". I have added a new Mac Pro, and want to use the LaserJet with it. I will be getting rid of the G5. The problem I am having is that I can not get the Mac Pro to "find" the LaserJet on its own. IF I have the G5 turned on, then and only then will the Mac Pro print via ethernet to the LaserJet. In this configuration it lists the Laserjet "@ G5". With the G5 turned off the Mac Pro Systems Prefs list the LaserJet as "idle", but when I attempt to print the Mac Pro searches for the LaserJet with no results. How do I fix this? Thanks!

Good news and bad news.
Good news: I got it to work
Bad news: It worked after about 4-1/2 hours of reading Apple and HP posts and printer manuals, and I really don't know that I did anything different I didn't do at 20 min.
To document for anyone that might search...
With a Laserjet 2100M or 2100TN connected through a Linksys router, I think what was key is to unplug and restart every network device several times, including the router itself. That's the only thing I can think of that might have made it work this time since I was doing the random monkey thing.
Pushing both buttons simultaneously on the printer gets it to divulge its IP address, but I realized I can look at my router in the browser and see where it starts assigning IP addresses (...100 in my case) and if worse came to worse, just configure a bunch of printers with ...100, ...101, etc up to the number of devices on the network since you don't know what got assigned what address (it's unrelated to which of the four ports a device is plugged into because of the wireless devices).
So you can go to the printer menu, I right click on the existing printers and clear all the printers, then hit + and then go to IP menu and pick the jetsocket choice, type in the IP address. The very last (successful) time, it knew what the printer was and picked the drivers (instead of generic postscript or PCL like it had 50 times before).
Again, I think it's the rebooting and unplugging or turning things off to force them to do a little comms handshaking. Depression to elation, all over a printer. We're just pawns in the grip of multinational hegemony. <joke>
Message was edited by: J Darrel Stickler

How do I get the Mac Pro (2013) to recognize 4K monitors correctly?

I have a 2013 Mac Pro, Six core, 32GB ram, FirePro 700s, 1TB storage, OS X 10.10. It's connected to a Samsung UN50HU6950FXZA 50" UHD TV via HDMI. The system info recognizes this monitor as a 120.5-inch with 7680 by 4050 resolution. WOW. In the Displays Preferences, this resolution shows up as "best for display". The actual resolution of the monitor is 3840 by 2160, but the closest scaled resolution shown is 3840 by 2025. This actually almost works ok, but requires setting the monitor to "fit" instead of 16 x 9; otherwise the image is slightly too wide for the screen. This happens whether the monitor is connected to the computers USB port or to a Thunderbolt port with a Mini DisplayPort-to-HDMI adapter. I've tried every combination. I've also booted from a different system disk, reset PRAM and power manager multiple times, used various combinations of monitors, disconnected all peripherals, run hardware diagnostics, everything.
I tried to use the computer with a Seiki 39-inch UHD monitor and it also showed up with these weird resolutions sometimes on startup, maybe once in five times. I thought it was a monitor problem, so tried the Samsung.
There's more, too. The machine doesn't play well with multiple monitors if one of the monitors is a 4K., it is not happy when I uses Spaces with a 4K monitor. In some cases, Final Cut Pro or Premiere CC will get jerky playback, the mouse pointer develops trails, other symptoms that look like graphics card failure. Only a restart corrects these issues. When the computer wakes from sleep and a 4K monitor is used, the application windows do not come back to the same place on the screen; with 2 monitors, the windows may come back on the wrong screen or the menu may be on the wrong screen, or both.
I wonder if anyone else is having similar problems. I have been on chat and phone with Apple support multiple times over this issue doing screen sharing and various diagnostics. While they keep trying and escalating, no real progress has been made. I bought the Mac Pro to be able to work with 4K video and actually display it. So far it works, but there are lots of compromises and work-arounds. Apple has suggested bringing the machine to the Apple Store, but since it works fine with smaller monitors, that probably won't help. I finally got a support person to say they may need to try on-site service. I have a call scheduled for Monday--so maybe something will happen.
The Pro is a great machine, but this stuff has been driving me crazy for months now. It's a great machine that just isn't ready for 4K yet

The available display proprieties are based on information that the monitor/TV sends to the Mac. It appears it is not sending the correct info.
You said " This happens whether the monitor is connected to the computers USB port or to a Thunderbolt port with a Mini DisplayPort-to-HDMI adapter.".
I am confused about the reference to USB.
Does the TV have a displayport or mini displayport input, that is best to use.
Try using the free Display Menu app from the Mac app store. I have to use that to get 3840x2160 (native resolution) on my Dell monitor)

How do I get my Mac Pro to see the second monitor through a video splitter and/or switcher?

In a recording studio we have a Mac Pro with two video display monitors in the control room and we want to be able to show the content of the second monitor to the person in the recording room on a big display monitor there. However, when we interpose a switcher or splitter between the computer and the second monitor so that we can (with a switcher) switch the second monitor signal from the control room monitor to the record room monitor or (with a splitter) split the signal to go to both monitors, we have no luck. On startup the computer does not see the monitor through the switcher, so it doesn't recognize its existence. If we start the computer up without the switcher in the signal chain, it sees the second monitor just fine, and (weirdly enough) we can then change the cabling to interpose the switch, which then works to switch back and forth between second monitors (control room and record room), but that cable swapping's a royal PITA. We want a simple solution that will allow us to start up the computer, see the second monitor in the control room, then choose to show it to the person in the record room with a simple flip of the switch (or even better, split the signal so it's available both places). The splitter we've tried most recently is this one: http://tinyurl.com/curen39 I'd appreciate any advice from people who have tried this configuration or something similar with success. We have a full ProTools HD Accel 3 system installed, so there's no room to install a second video card. Thanks.
Mac Pro 8-Core 2.4 GHz, OS 10.6.8

Christopher Dobrian wrote:
Thanks for the response! Yes, it's a 5x70 video card, a 5770 I believe. In any case, it does have the three ports, but (a not-well documented fact) that doesn't mean one can really get three full-resolution signals out of it at one time, as you alluded to in your message. So, yes, we did try hooking all three up directly to the computer, but the computer would only recognize two of those monitors, and the only way to get it to "de-recognize" the second monitor and recognize the third monitor was to physically disconnect the second monitor.
I did say when you want to connect three monitors to 5x70's there are some rules to adhere to. These are covered in the first two apple docs mentioned above, or by title:
Mac Pro (Mid 2010), Mac Pro (Early 2009): Issues with three displays and multiple DVI, HDMI connections
Mac Pro (Early 2009), Mac Pro (Mid 2010): Supported display configurations
The general gist of these rules is that to drive three monitor son a 5x70 you need two active adapters. That is why one of your monitors was disabled when you tried to add a third.
Here's a good explanation of what's going in here and why you need two active adapters on these cards:
Active vs. Passive Displayport adapters *the truth*
If you use DVI monitors and any of them have resolutions less than 1920 x 1200 then you can use single link active adapters. The "AMD Eyefinity Validated Dongles" chart shows some active (and passive) adapters that are acceptable. For example of a single link DVI active adapter is the Accell B087B-006B. An example of a dual link DVI active adapter would be the one from monoprice.com if you need to connect monitors with a resolution greater than 1920 x 1200.
I'm doubtful that SwitchResX would be able to convince the computer that there were only two monitors connected and direct the second monitor signal to the correct place, but it certainly seems worth a try, so thanks for the idea! Any other ideas are still welcome in the meantime.
I'm not doubtful. It is a very powerful utility for dealing with all aspects of multiple monitor configurations (they call them "Display Sets") complete with forcing EDID information if necessary. The different configurations can be controlled with a (contextual) menu and/or hot key.
SwitchResX is academic at this point if you want to have all three monitors connected. You would need to get that working first. Then use SwitchResX to vary the configuration combinations. So if you go this route the "name of the game" is figure out the active adapters you need.
I only described in general terms above about the adapters since you never said exactly what kind of connections these monitors require (single link DVI, dual link DVI, hdmi, mini-displayport, vga).

How do I get me mac pro to the original software it came with?

When I loaded my Mac with my PC info I did it incorrectly. I want to start over, how do I wipe all the stuff I have done to it?
Barbara

Apple - OS X Recovery restores your Mac with a few clicks.

How can i get my mac book pro to recognize a JVC camcorder?

How can I get my mac book pro to recognize a JVC camcorder using a Sony CAMERA USB cord??

Gotta say thank you — again. Sorry the posts were spread out over more than one location. I'll check and see if Third Party Software is considered a "peripheral", maybe that would have been a better single thread choice?
Definitely news we can use and the reference link is appreciated.
OT ~ We keep becoming more and more aware of how easy it is to lose one's bearings when it comes to keeping up with info tech. My husband and I are both official members of the geezer set and have been out of the work force for some years. You really do pick up so much just by being in the environment where people are using things to get work done. A couple of old MP3 players, PPC G5, and a vintage Inspiron 3800 that someone didn't want any more is about it. No cell phone, no iPod, no iPad, no home wireless network, no streaming media. Fixed income. So we do with what we can as long as we can. If we could get by without that Intel processor, we'd probably make do with what we've got. On the other hand, we've really wanted a notebook for a very long time and have to admit that needing to upgrade to accomodate my husband's project is pretty much just the "reason" we need. I really mean it when I say that we are beyond appreciative that users take the time to share info and patiently educate those of us who fall into the "slow tech" category.

Does anybody know how I can get my Mac Book Pro back, which was stolen during a presentation I was attending. I have the store receipt, however I had not installed i Cloud in my mac Book?

Does anybody know how I can get my Mac Book Pro back, which was stolen after a class I taught?
I have the store receipt, its serial number, however I had not installed i Cloud on my Mac Book and I'm not able to find my Mac back.
Thanks for helping me!

Sorry to say but you are out of luck.
What To Do If Your Mac Is Lost Or Stolen
If you activated Find My Mac before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi. What you cannot do is track your computer using a serial number or other identifying number. You cannot expect Apple or anyone else to find your computer for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty. Be sure to report the loss or theft to the local police. Have the serial number handy. If your Mac is found it cannot be returned to you if you don’t have the serial number and proof of purchase.
Find My Mac can be used from Find My Phone at iCloud.com and via Find My Phone on your iDevice.
      The following is third-party anti-theft software:
           1. STEM 2.1
           2. MacPhoneHome 3.5
           3. MacTrack 7.5.0
           4. VUWER 1.7
           5. Sneaky Bastar* 0.2.0
           6. Undercover 5.1.1
           7. LoJack for Laptops
           8. Hidden 2.0
           9. Prey 0.6.2

How can i get mynew mac mini to use the drive in my old mac pro

When I first got my new mac mini it dosen't have an internal drive. So I hooked it up on the network and fire wire. I could use the superdrive in the mac pro just fine both itunes and the dvd player worked as they would with a internal drive. But now a couple of upgrade down loads later not so much. yes I can connect with screen share and can get the dvd player to play dvd's but still can't get itunes to use the superdrive. Iht exect disk icon in the apple menue bar use to open and close the super drive but now it reads "no disk" How can I get my mac mini to automaticly use the superdrive when i turn on the mac pro.
I've done all the easy things changing the order of start up and share settings and i sware it did work ok when i first hooked it up.

http://www.totalapps.net/mac/remote-disc-sharing-when-the-superdrive-doesn’t-wor k-2/
Mind you, booting off the external optical drive of another computer may not be practical because of the different operating system limitations of the computers. I would just purchase an external optical drive from http://www.macsales.com/ if you find it doesn't work.

How do i get a mac book pro to out of the box

how do i get my mac book pro to out of the box. clear everything off it and start over

Boot with your original system installation DVD: with the disc in the drive, restart the MBP while holding the C key. From the Utilities menu, select Disk Utility. Erase the internal disk.
Quit Disk Utility and install OS X. Install the applications that came with the MBP from the Applications DVD.

Looking to get a Mac Pro Refurb, How can I get the Airport card too?

I can't find an airport card available anywhere for the Mac Pro. The refurbs do not look like they come with one. I can't find it from apple or anyone else.
What's the deal, and what can be done?
Thanks a lot,
Mark

You can take it into an Apple Authorized Service Provider (AASP) or search on-line for places which offer the card.
One site is Fastmac.com.
You may also want to take a look at the Mac|Life article "Getting a Mac Pro Wireless".

TS2530 When I put a burned cd from one Mac into another Mac, song titles do not show up! I have to enter them manually! My CD player reads the titles that i on the cd; how can I get my Mac to do so?

When I put a burned cd from one Mac into another Mac, song titles do not show up! I have to enter them manually! My CD player reads the titles that i on the cd; how can I get my Mac to do so?

The problem is that I burned these CD's myself from music that I added from my personal collection to iTunes. The INFO is ON the CD's (it appears perfectly when I put the CD in my Numark mixer...so I know the info is on the CD), but for some reason, my MAC PRO will NOT read the info on the burned CD when I place the CD into the MAC PRO. The CD was burned on a MAC that I no longer own. But there HAS to be a way to transfer songs from a burned CD with the INFO that is on the CD burned with iTunes.
PLEASE HELP!
-Old Appel

TS3999 How do I get my Macbook Pro and iphone 5 to sync calendars in 2014? It worked fine in 2013, but the 2014 dates are blank on my Macbook.

How do I get my Macbook Pro and iphone 5 to sync calendars in 2014? It worked fine in 2013, but the 2014 dates are blank on my Macbook. The all icloud is checked on my phone and the enable icloud account and push are selected on the Macbook.
Thanks

Do the events from your iPhone calendar appear on icloud.com? If not, go to Settings>Mail,Contacts,Calendars>Default Calendar (in the Calendars section) and make sure you have selected an iCloud calendar as your default. If you haven't, make this change, then add a new event on your iPhone calendar and see if appears on icloud.com and your Mac now.

How do I get my MacBook Pro to recognize my Toshiba external hard drive?

How do I get my MacBook Pro to recognize my Toshiba external hard drive? I'm working on transferring my music from our home computer to my new laptop and I already got all my music onto the hard drive but now, when I plug it into my MacBook Pro, it doesn't recognize it. There isn't an icon that pops up and nothing happens at all. The blue light on the hard drive that indicates that it knows it is plugged into something comes up but that's about it. Someone told me I might have to "format" it but I don't know what that means and I don't know how to do it. I just want to get my music from the hard drive to my laptop so please help!

natgray17 wrote:
I don't know about your first question... I went to finder, preferences, then general but I didn't see anything for the hard drive.
Huh, in the Finder menu, Preferences, you will see this:
Nope, disk utility cannot see it. I've tried unplugging it and plugging it back in but it still won't recognize it.puter that's a Mac...
If DU cannot see it then the preferences is just an academic exercise.
If this is a USB drive then as mentioned above you may need a powered USB hub since there may not be enough power from the USB to run the drive. What else do you have plugged into the USB ports? If there's some stuff you can unplug it then do it and see if your drive mounts.
What do you mean from a Windows machine? It's a Toshiba hard drive and I put my music on it from my home computer that's a Mac...
Which is all I wanted to know, i.e., whether the drive came from a Winows machine. So it's been formatted and created on a mac. Therefore it should mount on this other mac machine. So it most likely is a power problem.

How do I get my MacBook pro to play on my tv?

How do I get my MacBook pro to work on my tv. I have the correct cables to connect it. I just keep getting the mac screensaver showing?

You don't. The HDMI socket on your MacBook Pro is an output, not an input.
What content source are you wanting to view? Your MacBook Pro may be able to view it directly.

How do I get my mac pro on airplay?

Similar Messages

Maybe you are looking for