How do I get past the "could not sign in" alert activating Facetime

I've got Facetime working on my iPhone, Macbook Pro, iPad, but my Mac Pro does not cooperate. When I try to sign in with my Apple ID (the same one I use for the Macbook Pro) I get the following warning: Could not sign in. Please check your network connection and try again.
My network connection is alright, or else I could not have posted this question. All devices are connected through Wi-Fi, only the Mac Pro is on LAN.
Does anyone know how to get past the "could not sign in" alert during Facetime activation? I've searched this forum but no solution here worked.
Thanks in advance for any help.

So I thought: let's try the link Carolyn Samit suggested. So I got to Apple - Support - FaceTime to find information I already knew, about port forwarding I had already tried:
443 (TCP)
3478 through 3497 (UDP)
5223 (TCP)
16384 through 16387 (UDP)
16393 through 16402 (UDP)
What's the logic anyway of opening router ports that let my Wi-Fi devices through while refusing a LAN device? What have we got here? A firewall that only protects against cables?
I guess Apple is too busy selling iPads to help a customer who's trying to use Apple software on an Apple machine.

Similar Messages

  • How do i get past the "do not have sufficient privileges" error message installing flashplayer?

    how do i get past the "do not have sufficient privileges" error message installing flashplayer? i've googled the problem and seen the other solutions and for some reason cannot get any of them to work for me.

    I've recommended several things here in the forums and like you, I've seen zero success.
    Run as Administrator = no luck.
    Take ownership of the c drive = no luck.
    Create a new (admin) account = no success.
    I've even seen one poster who reformatted and reinstalled Window 7, and no luck.
    Frankly, I'm at a total loss.

  • How do I get past the error message Sign In Failed on my 2nd computer?

    How do I getr past the error message Sign In Failed on my 2nd computer? I have signed out, uninstalled, and reinstalled to no avail.

    So I thought: let's try the link Carolyn Samit suggested. So I got to Apple - Support - FaceTime to find information I already knew, about port forwarding I had already tried:
    443 (TCP)
    3478 through 3497 (UDP)
    5223 (TCP)
    16384 through 16387 (UDP)
    16393 through 16402 (UDP)
    What's the logic anyway of opening router ports that let my Wi-Fi devices through while refusing a LAN device? What have we got here? A firewall that only protects against cables?
    I guess Apple is too busy selling iPads to help a customer who's trying to use Apple software on an Apple machine.

  • How do I get past the drivers not found problem during Windows 7 install?

    I have a brand new (March 2012) MBP running Mac OS 10.7.3 (Lion) with a SuperDrive.  I'm trying to use Boot Disk Assistant to install Windows 7 with a valid Windows 7 DVD burned from an .iso.  I've partitioned the 750 GB HDD with 500 GB for Mac OS and 250 GB for Windows.  The system reboots and starts to install Windows 7.  Then it pops up an error:
    "A required CD/DVD drive device driver is missing.  If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.
    Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step."
    Of course, I can't eject the Windows setup DVD because the eject button doesn't work so I can insert the Windows Support Software that I downloaded from Apple.  So, I copied the Windows Support Software to a USB drive.
    Once I get to this point, I can browse to the USB drive and I get the following file tree:
    Drivers
         Apple
              x64
         Asix
         Atheros
         ATI
         Broadcom
         Cirrus
         IDT SigmaTel
         Intel
              Chipset
                   All
                   ia64
                   Lang
                        Chip
                             (various languages)
                   WIN7
                   x64
         Marvel
         NVidia
              NVidiaChipset32
                   Ethernet
                        NAM
                   HDAudio
                   SMBUS
                   SMU
              NVidiaChipset64
                   Ethernet
                        NAM
                   HDAudio
                   SMBUS
                   SMU
              Win7_32
              Win7_64
         RealTek
    The only directory that the installer recognizes as having valid drivers is the Intel > Chipset > WIN7.  When I select all of the drivers listed, the installer acts like it's installing something but then it stops saying that new devices were not found.  I can't get past this point.  The Windows 7 installer will not continue.  If I select any of the other directories, I get the message "No device drivers were found.  Make sure that the installation media contains the correct drivers, and then click OK."
    Any thoughts?  Admittedly, this is the my first experience dealing with Mac OS and I'm completely out of my league.  However, this is a Windows installation issue and I'm getting hung up on device drivers.  Usually in the PC world, I can easily go to the manufacturer's website and just download the drivers I need directly.
    ...Mel    
    Sr. Systems Administrator - Windows, SharePoint

    valid Windows 7 DVD burned from an .iso.
    Usually burned ISO to DVD only works when burn speed is set to slowest.
    Otherwise there are a number of problems with the install failing to do proper install, sometimes not even booting to start the install. Trouble is from using Apple Disk Utility. Burned in Windows, the ISO will be fine. Using Disk Utility at slowest has become "try reburn again at reduced speed."
    You can use mouse on startup to eject DVDs but what you want is your drivers later after Windows is installed, and have them on USB flash or something.
    you don't need any drivers except in a few cases (MacBook Air that lacks DVD and uses USB-DVDs)
    Product support page is best place to start with every device and product.
    www.apple.com/support/bootcamp
    has manual pdf, faq, how to, support articles

  • Apple ID.  My newly updated iPad 2 wants an email for the apple ID.  My apple ID is not an email address.  How can I get past the set-up screen?

    My newly updated iPad 2 wants an email for the apple ID.  My apple ID is not an email address.  How can I get past the set-up screen?
    I can't change my Apple ID.  It would mess all my stuff up.

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Will a program mention for MAC OSX be allowed to download on the newest iPad version. If so, how do I get past the "safari" can not download this file?

    Will a program mention for MAC OSX be allowed to download on the newest iPad version. If so, how do I get past the "safari" can not download this file?

    No, because iPads do not run Mac OS X. They run iOS.

  • How do I get past the pass code on iPad running on Ios7.1 because j have forgotten it and I don not own a computer so it has to be with our a computer

    How do I get past the pass code on iPad running on Ios7.1 because j have forgotten it and I don not own a computer so it has to be with out
    a computer

    Use a friend's computer. Your iPad will be erased.
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

    I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My Apple password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

    Hey Dpcupcake,
    If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • I choose Adobe Reader XI to open a GPX file. It will not open it how do I get past the screen that says it will not open it to choose something else?

    I choose Adobe Reader XI to open a GPX file. It will not open it how do I get past the screen that says it will not open it to choose something else?

    http://windows.microsoft.com/en-us/windows/change-file-open-program#1TC=windows-7
    or
    http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7

  • HT201178 I have a Mac mini with Magic Trackpad and wireless keyboard. The keyboard and track pad got wet so I have purchased new ones. Problem is how do I get past the log in screen to set up the pairing of the devices? The old ones do not work

    How do I get past the login screen to pair my new wireless keyboard and trackpad when the old ones are water damaged and don't work

    Have you tried pulling the batteries out of the damaged ones so that they are completely off; then shutdown your Mac Mini via the power button on the back right. Turn on your new keyboard and trackpad then power your Mini back up? The auto detection should find your new keyboard and trackpad.

  • How can I get past the white screen?

    When I start my iMac I see a message that my start up disk is full and that I need to delete files. After I type in my user name and password, all I see if a white screen. This problem started today. The error message about the start up disk started two days ago, and when I looked at the disk, I saw that over half of it has files described as "other". The hard drive is 250 GB. I have Time Machine backups but I don't know how to get to them to help me. So, I guess that I have two questions: how do I get past the white screen, and what are the files that are catogoraized as other? Thanks.

    I did not put the OS info in my question because I am not sure what I have. I upgraded to Lion so that I could use the cloud between my devices, however I do not know the number.
    Apple menu item->About this Mac and the version is listed there. Click on that and get the build number. Click again and get the machine's serial number.
    I am stuck on the white screen. Any other advice?
    Start with a google search for white screen mac. This one might do the trick: http://www.mac-forums.com/forums/apple-desktops/138137-imac-wont-get-passed-whit e-screen.html

  • Upon start up I get a start up disk full message and to delete files, now I only get a a blue screen on start up. How to I get past the blue screen and how do I delete files?

    Upon start up I get a "start up disk full message, delete files". Now on startup I only get a blue screen. How do I get past the blue screen and how do I delete files.

    That;s really not enough free space... you can use a tools such as OmniDiskSweeper to find out where your large files reside and begin pruning (or copying to an external if they're files that you want to keep).
    One thing is certain - if you're going to continue your current usage you're certainly going to need to install a larger boot drive.
    Clinton

  • How can I get past the error messages that keep popping up when I try to download Flash player?

    How can I get past the error messages that keep popping up every time I try to download anything?

    Hi
    Could you please let us know more about the error messages that you got?
    The following page has information on the error messages: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html
    Thanks,
    Sunil

  • How can I get past the questions, to change password

    How can I get past the questions, to change password

    Hello Cocoscafe
    If you have a rescue email address setup in your Apple ID profile, then you can reset the security questions. You would need to know those answers to get passed the screen to log in and verify.
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/ht5312
    The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so.
    Regards,
    -Norm G.

  • How can I solve the "could not sign in iTunes Store: An unknown error has occurred." problem

    after finishing watching a movie (paid movie), I tried renting another one but the "Could not sign in " error stopped me from doing that.  I have restarted the Apple TV many times, turned it off, restarted my cable modem, and much more. However, I am still getting this error. I would appreciate if anyone could give me a possible solution to this problem.
    Thanks.

    after finishing watching a movie (paid movie), I tried renting another one but the "Could not sign in " error stopped me from doing that.  I have restarted the Apple TV many times, turned it off, restarted my cable modem, and much more. However, I am still getting this error. I would appreciate if anyone could give me a possible solution to this problem.
    Thanks.

Maybe you are looking for

  • Features I would like to see in the next version o...

    Following are some of the drawbacks in the OVi suite when compared to PC suites from other manufacturers.As a Nokia Ovi user I would love to have these features added to Nokia OVi suite as I believe they are very useful, 1.OVi suite doesnt show the m

  • Using an Airport Extreme and a Time Capsule at the same time

    Guys I have had an Airport Extreme and a Time Capsule running together for nearly a year now and over the last few days the TC has been behaving badly. I changed its settings and now I'm in a mess. No, I can't remember the previous settings Does anyo

  • HT201263 how do you update your i pod touch 4th generation

    How do you update your i pod

  • EA6500 internal DNS

    Hi All, I  upgraded from a WET610N to the newer EA6500 recently.  I have a problem with connecting using my public DNS name to the local network.  It works when I am not on the internal network, but not on the internal network itself.  I do see using

  • Can iDVD recongnize 4.7 Gb discs?

    Hi, I'm trying to burn a project to a 4.7 Gb disc but I only have the option to select 4.2 Gb and 7.7 Gb. My project is slightly too long for 4.2 Gb. The strange thing is, it worked last night on the 4.2 Gb setting but now it won't... Thanks, Jamie I