How do I get Photoshop CS2 to resume working with Lion upgrade?

How do I get Photoshop CS2 to resume working now that I have installed Lion upgrade?
Can I uninstall Lion and get back to a working system?

RoaringApps Mac OS X Lion Application Compatibility
Lion App Compatibility Table - RoaringApps
Using Cloning as a Backup Strategy
Clone X 4.0
Carbon Copy Cloner 3.4.1
How to prepare your Mac for OS X 10.7 Lion
Upgrading to Mac OS X Lion Protocol

Similar Messages

  • How can I get photoshop CS2 to work with Windows 8.1?

    how can I get photoshop CS2 to work with Windows 8.1?

    Have a look at
    http://forums.adobe.com/message/4976720
    Cheers
    John

  • How do I get all my fonts to work. I upgraded the OS and the old fonts don't seem to work.

    How do I get all my fonts to work. I upgraded the OS and the old fonts don't seem to work.

    If the fonts are installed on the OS they should be there already. If they were only available to CS5 they are probably in the fonts folder in the Adobe section of the Common files (location will be OS dependent), or they may be in ID's own fonts folder.

  • I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

    I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

    For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
    For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
    See: 
    http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html  
    Be well...

  • How to i get an itrack solo to work with pro audio x?

    how to i get an itrack solo to work with pro audio x?

    Long shot perhaps, but...
    how about...
    following  instructions in  manuals?
    http://help.apple.com/logicpro/mac/10/#lgcpebe92ce0

  • How do I get my mms text to work with net10? Cellular data network is not visible on my iPhone 4.

    How do I get my mms text to work with net10? Cellular data network is not visible on my iPhone 4.

    After hours restoring phone and resetting all my accounts and settings the Bluetooth is back on. Not sure how long this will last. In regards to AirPlay taking over, I had to drive far enough from our wifi signal to allow the Bluetooth to take back the audio. Its working for now.

  • How do I get my Jawbone Era to work with my Ipad 2

    How do I get my Jawbone Era to work with my Ipad 2?  The Ipad shows the Jawbone as synced, however, when I play a video it does not play through the Jawbone, only the Ipad speaker.

    You need to pair the iPad with the bluetooth keyboard. I don't understand how you could have used it even once without doing this process (unless whoever sold the iPad and keyboard to you did this for you?) but perhaps it has somehow become unpaired. There should be instructions with the bluetooth keyboard on how to pair it with an iOS device like your iPad, but the general process is pretty straightforward as described here:
    iOS: Third-party Bluetooth accessories
    If you can't find the pairing instructions/user guide that came with the keyboard then look on the manufacturer's website, they'll almost certainly have downloadable User Guides containing the info on pairing.

  • How do i get my ipad 2 to work with another micro sim

    how do i get my ipad 2 to work with another micro sim

    Follow the instructions here >  iOS: Syncing with iTunes

  • Adobe Photoshop CS5 is not working with Lion.

    Adobe Photoshop CS5 is not working with Lion. It is totally non responsive to a point where i cannot work. all other CS5 programs seem to be running well so far. any advice? if no, then how do i revert back to Snow leopard?

    I had real problems with all Adobe apps - it said I needed to install a version of Jave Runtime, but kept saying that I wasn't connected to the internet to complete the action. This was not the case - I was connected to the internet.
    I followed this link : http://support.apple.com/kb/DL1421  to install a version of Java and all Adobe apps fire up now. Haven't done much testing within the apps, but at least I'm further ahead than I was.
    So thanks to the message boards for helping me out.
    Reg

  • How do I get the new iPod to work with iTunes

    I recently purchased a new iPod--I think it's the "Shuffle," whichever one retails for $150. When I plugged it into my iMac, it said I needed to install iTunes 10 to run it. When I checked for updates, it said that iTunes 9.xyz (whatever came after the 9) was the latest version.
    How do I get this new iPod to work. As you can tell, I am not much of a gadget junkie, and I'm a bit of a technology incompetent, which is why I purchased the Mac to begin with. I have an iMac, have no idea what operating system I am using--whatever came with it when I purchased it in November, 2008.
    TIA!

    Okay, I just looked and I do have 10.411. How do I upgrade to get the new iPod to work, and how much does the new operating system cost?

  • How do I get my i phone to work with my security camera  while on vacation, I have a wansview NCB547W

    I cannot seem to get my WANSVIEW NCB541W to work with my I phone.

    Hello JaeRoc48,
    I understand that the sound is not working.
    Go to start.
    Type Sound.
    Select sound.
    Select speakers as default.
    Click OK.
    Let me know how everything goes.

  • How can we get the web cam to work with sykpe or any out going calls

    can get the web cam to work with skype

    Hey there,
    What model laptop is this? Are you using the built-in webcam or is this a external web cam? Also what operating system are you using?
    Thanks!
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How can I get my Canon A620 to work with Windows 7

    Just signed up here, ot the brightest with tech stuff. I'm trying to get my Powershot A620 to work with Windows 7. I'm guessing there's drivers I need to down load ? Will they be on the Canon website or on this help site ? 
    I'll keep looking around. 
    Steve

    If you need photo software and don't have any you can download Canon software here.
    http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a620#Dri...
    But if you already have software you use there is nothing special you need. Ether connect the camera using a USB cable or remove the SD card from the camera and use a card reader (either an external one or the computer may already have one built in.)
    If  you decide to connect the camera via USB you don't need a driver; its built into W7.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • How can I get photoshop cs2 to recognize me as administrator?

    I have a legal version of cs2 that has worked well since I purchased it in 07.  Recently it would seem to load fine but quit at the last minute.  I have tried running the program as administrator.  No luck.  I have tried running as administrator through compatability.  I have unlocked the special administrator access in vista, uninstalled and reinstalled the program.  No luck.  All the other programs seem to run fine; it's just photoshop that seems to have locked me out.  Please help!

    I don't think that you have a PS problem, but a problem with your Vista.
    One thing to try is an elevated prompt to make the administrator active - worth a try.
    Go >Start > All Programs > Accessories > Command prompt > Right click and select 'Run as administrator'
    In the command window type: C:\>net user administrator /active:yes
    Go to the CS .exe file and right click, then try 'run as admin'
    I hope it helps,
    Roger

  • Genral How do I get syncronize​d encoders to work with a PCI-6602

    I am new to the DAQmx and need some general help writting VB code that works.
    I can get some things to work, but others don't work at all and I don't have enough knowledge of these drivers to get up the learnign curve hump.
    I wanted to post this as a follow-up
    to the thread:
    http://forums.ni.com/ni/board/message?board.id=40&​message.id=5430&query.id=215100#M5430
    But I couldn’t figure out how.  
    Anyway, my problem is that I will
    eventually have to do much the same thing as the above thread with two encoders in
    sync.
    I have a pci-6602 card, and my code
    snippet is at the bottom  The 6602 doesn't have the analog in to syncronize to like the thread above
      (yes, it is in Visual basic
    6)
    I can’t figure out the
    DAQmxCfgSampClkTiming.   Why do I want to have a sample clock at all?   (okay,
    when I have two channels synced I do – but this sample I want to get working and
    I don’t see why)?
    Can’t I just get a new counter value
    with each quadrature input change?   (That’s what the DEV/PFI39 is, the same as
    encoder channel A )
    Okay, so hopefully you tell me how
    to get that to work.
    Next question:  What can I use for
    the DAQmxCfgSampClkTiming when I am doing two channels in sync?  Nothing seems
    to work, and I have tried a bunch of things.
    Brynn
    Rogers
    DeltaTech
    Controls
    952-403-7400
    x431
    //// code that doesn't really work.   "Dev1/PFI39" is the channel A encoder input, I just want new data whenever the encoder changes (for now)
        ' DAQmx Configure
    Code
        DAQmxErrChk
    DAQmxCreateTask("count", TaskHandle)
        TaskIsRunning =
    True
        DAQmxErrChk
    DAQmxCreateCIAngEncoderChan(TaskHandle, "Dev1/ctr0", "",
    DAQmx_Val_EncoderType2_X4, 0, 0#, DAQmx_Val_EncoderZIndexPhase1_AHighBHigh,
    DAQmx_Val_AngleUnits2_Ticks, 500, 0#, "")
        DAQmxErrChk
    DAQmxCfgSampClkTiming(TaskHandle, "Dev1/PFI39", 1, DAQmx_Val_Rising,
    DAQmx_Val_AcquisitionType_FiniteSamps, samples)
        'DAQmx Start
    Code
        DAQmxErrChk
    DAQmxStartTask(TaskHandle)
        ' DAQmx Read
    Code
        DAQmxErrChk
    DAQmxReadCounterF64(TaskHandle, -1, 0.05 * samples, data(0), samples, ReadCount,
    ByVal 0&)
        ' All done!
    StopTask
        'DAQmxErrChk
    DAQmxStopTask(TaskHandle)
        'Stop task isn't needed because
    Clear Task also stops task
        DAQmxErrChk
    DAQmxClearTask(TaskHandle)
    Solved!
    Go to Solution.

    Okay,   Here is the working routine to get syncronous data from two encoders, and it seems to work okay.
       I have this working with my two 2000 CPR encoders, we'll see how it works when I get the 500,000 CPR encoders later.
    The three big problems that caused it to not work were:  
    1)   Theduty cycle argument for the createCOpulsechanfreq task needed to be between 0 and 1.  I had '50.0' before, it works when it is '0.5'
    2)   The sample timebase that I used (ctr7) needed to be started before either of my two angle encoder tasks were created
    3)   The "dev/PFI8" string needed to be changed to "/dev/PFI8".   I don't really understand why, but that was what seemed to fix it all.
    So this question has been answered...      Now I have a different problem while reading 8 PWM values at once with the Semiperiodcounter,  which I will post in a new a different thread.
    Thanks!
    ''''''''''''''''''   Working code here
    Public Sub Aquireposition(samples As Long, data0() As Double, data1() As Double)
    Dim BaseTaskHandle    As Long
    Dim encoder0TaskHandle    As Long
    Dim encoder1TaskHandle    As Long
    Dim TaskIsRunning As Boolean
    Dim ReadCount As Long
    Dim strCounterString As String
       On Error GoTo ErrorHandler
        DAQmxErrChk DAQmxCreateTask("base", BaseTaskHandle)
        DAQmxErrChk DAQmxCreateCOPulseChanFreq(BaseTaskHandle, "/Dev1/ctr7", "base", DAQmx_Val_FrequencyUnits2_Hz, DAQmx_Val_Level1_Low, 0#, 200#, 0.5)
    'Specify continuous timing
        DAQmxErrChk DAQmxCfgImplicitTiming(BaseTaskHandle, DAQmx_Val_AcquisitionType_ContSamps, 200)
         'DAQmx Start Code
        DAQmxErrChk DAQmxStartTask(BaseTaskHandle)
    ' DAQmx Configure Code
        DAQmxErrChk DAQmxCreateTask("encoder", encoder0TaskHandle)
        TaskIsRunning = True
        DAQmxErrChk DAQmxCreateCIAngEncoderChan(encoder0TaskHandle, "/Dev1/ctr0", "", DAQmx_Val_EncoderType2_X4, 0, 0#, DAQmx_Val_EncoderZIndexPhase1_AHighBHigh, DAQmx_Val_AngleUnits2_Degrees, 500, 0#, "")
        DAQmxErrChk DAQmxCfgSampClkTiming(encoder0TaskHandle, "/Dev1/PFI8", 1, DAQmx_Val_Rising, DAQmx_Val_AcquisitionType_FiniteSamps, samples)
        ' second encoder
        DAQmxErrChk DAQmxCreateTask("encoder1", encoder1TaskHandle)
        TaskIsRunning = True
        DAQmxErrChk DAQmxCreateCIAngEncoderChan(encoder1TaskHandle, "/Dev1/ctr1", "", DAQmx_Val_EncoderType2_X4, 0, 0#, DAQmx_Val_EncoderZIndexPhase1_AHighBHigh, DAQmx_Val_AngleUnits2_Degrees, 500, 0#, "")
        DAQmxErrChk DAQmxCfgSampClkTiming(encoder1TaskHandle, "/Dev1/PFI8", 1, DAQmx_Val_Rising, DAQmx_Val_AcquisitionType_FiniteSamps, samples)
        'DAQmx Start Code
        DAQmxErrChk DAQmxStartTask(encoder0TaskHandle)
        DAQmxErrChk DAQmxStartTask(encoder1TaskHandle)
        ' DAQmx Read Code
        DAQmxErrChk DAQmxReadCounterF64(encoder0TaskHandle, -1, 0.05 * samples, data0(0), samples, ReadCount, ByVal 0&)
        DAQmxErrChk DAQmxReadCounterF64(encoder1TaskHandle, -1, 0.05 * samples, data1(0), samples, ReadCount, ByVal 0&)
        ' All done! StopTask
        'DAQmxErrChk DAQmxStopTask(TaskHandle)
        'Stop task isn't needed because Clear Task also stops task
        DAQmxErrChk DAQmxClearTask(encoder0TaskHandle)
        DAQmxErrChk DAQmxClearTask(encoder1TaskHandle)
        DAQmxErrChk DAQmxClearTask(BaseTaskHandle)
        Exit Sub
    ErrorHandler:
    '   MsgBox "Error: " & Err.Number & " " & Err.Description, , "Error"
    '    mlngPWM_ErrorCount(lngChannel) = mlngPWM_ErrorCount(lngChannel) + 1
        'MainForm.PWMErrorCount = "Errors(" & lngChannel & "): " & mlngPWM_ErrorCount(lngChannel)
        Resume Next
    End Sub

Maybe you are looking for