How do I get rid of the text messages on my phone for good?

After I delete the texts I can't recieve incoming messages? I can only recieve those messages after I restart my iphone but then all the older messages I had just deleted come back.

If you wish to delete a whole conversation, then you simply go to the left side of the conversasions panel and slide your finger to the left. If you wish to delete only a few, then hold the bubble until it has a few options come up, chose more than choose delete. That wil not delete the text from the other persons phone, you are not able to do that wothout taking there phone. Hope that helped

Similar Messages

  • LG Lucid 3: How can I get rid of the text message indicator? It says I have a text message, but I do not.

    I have a new LG Lucid 3 and the text message indicator says I have a new message, but I do not. Messaging is empty when I click on it. How can I get rid of the "1" indicator? I tried turning the phone on and off and that did not work.

    Thanks for trying, Anzivina! You've done some strong troubleshooting. Although I do wish it had resolved this matter, I believe we still have options. You've indicated that  you've done a factory reset. Can you walk me through the steps you took to get there? Also, after the factory reset, how long before this message indicator appeared again? Was it before or after you restored all your personal data?
    DionM_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • I upgraded pages.  Now when I begin a new document I automatically have a text box.  How do I get rid of the text box so that it does not automatically appear.  What settings do I need to change?

    I upgraded pages.  Now when I begin a new document I automatically have a text box.  How do I get rid of the text box so that it does not automatically appear.  What settings do I need to change?

    Perhaps you are loading a template that has a text block already on it.
    You might try the blank template option and set that as your go to template in your preferences

  • I just loaded the 'lion' now my mail takes a new life....how do i move the reading panel to the bottom / also how do i get rid of the text/content under each mail..two simple things not sure obvious on this version !!!

    i just loaded the 'lion' now my mail takes a new life....how do i move the reading panel to the bottom / also how do i get rid of the text/content under each mail..two simple things not sure obvious on this version !!!

             

  • How do i get rid of the charge on my debit card for online backup?

    how do i get rid of the charge on my debit card for toshiba online backup? Backup has not been functional for months. I called the customer service number and eventually was transfered to some apartment complex phone number.

    Hi there!
    You cal to customer services of your bank or credit card and being told as disenroll in Argentina is usually effective.
    Another way is Toshiba customer that you want to cancel the service, it is your right.
    Because you have hired an online backup service with so many free payment? On the other side is always better physical backup, at least I think so.
    Best regards.

  • How do I get rid of the error message "There was an error connecting to the server “Office AirPort Extreme” ?

    How do I get rid of the error message "There was an error connecting to the server “Office AirPort Extreme” ?  This message shows up 3 times when I boot my iMac.

    I do have a USB hard drive hooked up to the Airport.  I've never created an AppleScript for it.  Should I disconnect the USB drive and see if I still get the error message?
    Thanks for your reply!

  • When starting Firefox 4 I get an error message. After clicking OK it nevertheless runs. How can I get rid off the error message.

    When starting up Firefox 4 I get an error message. After clicking OK it nevertheless runs. How can I get rid off the error message?
    The error message is: what happened: Type Error: Components. classes ['@mozilla.org/extensions/manager;1'] is undefined.
    It appears all the time already from the beginning after installing Firefox 4.

    Thanks a lot. The Ask toolbar created this problem. Another problem is: When searching on the web via Google, normally it is possible to type a few letters and then look what appears and then click on the wanted word(s). A number of word(s) ineed do appear, however it is not possible to select any of them as ws possible as mentioned in olders versions.

  • How do I get rid of the Thunderbird message?

    How do I get rid of the Thundebird message?

    Are you talking about the Thunderbird Start page when you first start the program?
    From the Menu Bar select '''Tools-Options-General'''
    Un-check the first option.
    No Menu Bar? Press the '''alt '''key.

  • How do i get rid of the following message

    i am trying to sync my iphone 4 with my imac and getting the follwing message. 
    "Itunes could not back up the Iphone because a session could not be started with the iphone."
    everything seems to sync but how do i get rid of the message.

    You need to configure Mail preferences correctly.

  • TS2755 How do i get rid of the "saved messages" on my iphone?

    whener i go to setting>general>usage it shows that i have 1.8gb of "saved messages". How do i get rid of these?

    Firstly you DO NOT have to do a factory reset / wipe device, it is simply not required to get the space back!!
    Mine had 3GB and I just got rid of it all, here is how:
    Make a backup in iTunes
    open iBackupBot (Google it)
    Go to the relevant backup
    Click on Multimedia File Manager and click on the other Multimedia files tab
    Sort by filename by clicking the Filename tab
    Find MediaDomain/Library/SMS/Attachments and highlight all of them, then press delete.  You can also click to export to a folder of your choice, if you want to save them that is. 
    Then go to System Files>MediaDomain>Library>SMS>Attachments
    They will be all listed here, highlight them all and press delete
    Then just restore that backup using iTunes! 
    Tadaa! Space recovered, your messages are still there but without the attachments! 
    P.S You may want to make two backups in case you get any of the above steps wrong, but it is simple to follow the above and not do anything wrong!

  • How do I get rid of the tips messages that show up just underneath the search box?

    I have google as my home page. I am trying to figure out how to get rid of the tip or brief FYI message that shows up just underneath the search box. Can you help? Thanks

    Do you mean the snippets that you see on the about:home Home page?
    You can hide the box that shows the snippets with code in userContent.css
    * http://kb.mozillazine.org/userContent.css
    <pre><nowiki>@-moz-document url(about:home){
    /* hide snippet container on the about:home page */
    #snippetContainer { display: none !important; }
    </nowiki></pre>
    * http://kb.mozillazine.org/Editing_configuration
    You can use the ChromEdit Plus or Stylish extension to have easier access to the customization files.
    * ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html

  • How can I get rid of the text and only have icons in the bookmarkfield?

    Earlier the bookmarkfied only showed icons but after the upgrade they show icons and text. How can I get back to only icons so I can have the good old overwiw back?

    umparrothead wrote:
    Test this by going to that folder with both in it and click View/Show View Options. In there, de-check "Show icon preview", and you should see the bordered icons go to default file type icons and the unframed ones remain the same. I honestly don't know how to re-embed the image in the icon data, as it does not play well with the typical paste in on Get Info. Hope this gets a solution rolling, because it's something that's bothered me as well.
    Thanks umparrothead. Yeah, I see what you're saying. The copy and paste into the "get info," is buggy, but it does actually work. I have noticed this when trying to change the icon on an .avi file. The copy paste in "get info," initially shows the paste, but it's not reflected immediately in the files icon in the finder window. I have gotten it to show up as the files icon by moving the file to another folder, (in list view), and then... opening then and closing the folder.
    See here the border on the one file is gone!!
    This opening and closing does not work in the folder the file is in. It only works after moving it to another folder and then opening and closing?!? I think it has something to do with quickview trying to over-ride our choice of icon for it's own choice, whether it be a poster frame on a movie file, or in this case it's own "bordered" view of the photo inside. I imagine it might also show up after a restart, but that is surely far more extreme than the dreaded move file/open folder/close folder/open folder/move file back, trick. uuugghhh...
    This copy paste thing is no solution to be sure. But it does work. I just wish there were some kind of script so I can run it on hundreds of photos at a time...
    Any one else out there with any ideas?!?

  • How do I get rid of the text boxes in a PDF created in FormsCental when I print the PDF?

    I just started working with Acrobat XI Pro and use to use LiveCycle Designer 9 to create forms. The thing I'm wanting to do is to not have the text response boxes appear in the PDF when it is printed out. I am getting very few options in FormsCentral and it might be in there but I haven't been able to find it just yet. Anyone know how to solve what I'm asking or am I asking to much? Thanks in advance.

    [discussion moved to FormsCentral forum]

  • After the new update, all my apps have their name underneath the logo which is annoying. How do I get rid of the text?

    Since updating to the new 7.1.1, all my apps now have text underneath which I don't like. How do I remove the text and just a keep the app logo?

    all ios versions ever have had text underneath the icon displaying the app name
    http://www.datas-recovery.com/upfiles/fck/update-ios-7-iphone(1).jpg
    here is ios7.0 and ios6 side by side and both have app name under them

  • How do I get rid of the automated message after my outgoing voicemail?

    Hey Everyone,
    I have a 16GB iPhone 3G, and I recently I contacted AT&T regarding problems I was having with the recently deployed Free Wi-Fi service at AT&T hotspots. The problem was resolved, but in the process AT&T reset my voicemail account. Since then, every time someone calls me, they hear my custom outgoing voicemail message, followed by the dreaded automated message, "At the tone, please record your message. When you are finished recording, you may hang up or press 1 for more options." One of my favorite things about the iPhone's visual voicemail was that it cut through all this type of excess! In an effort to resolve this (it was never like the before and I know I don't get the automated message when I call my friends who have iPhones), I called Apple Tech Support. They told me there to call the number 1-800-331-0500, and simply reset my pass code, and that this would fix it. Feeling relieved, I followed their instructions, but to no avail. I called AT&T and was told that "This is a new feature that AT&T has added to their voicemail service" and that "Anyone who has their voicemail reset would now have this new feature added to their voicemail." I was told there is no way to disable it! Is this in fact the case? Am I now stuck with this new "feature"? If anyone knows how to get rid of this, please let me know! If anyone from Apple is reading this, can you PLEASE see if anything can be done about removing this extremely annoying "feature" from iPhone voicemail? Thanks very much!
    David

    Hi David,
    On your iPhone, when you press Phone> Voicemail, does it Call standard voicemail or show Visual Voicemail?
    It sounds like this issue would be resolved by contacting AT&T again.
    http://www.wireless.att.com/about/contact-us/contact-us-phone.jsp
    Customer Support: 1-800-331-0500
    Also, you might be able to find the answer on the AT&T message boards.
    http://forums.wireless.att.com/cng/board?board.id=apple
    -Jason

Maybe you are looking for

  • User decision Dead line

    Hi Experts,                   I am having a user decision step type and for that i have deadline for 3 days it works fine as long as the person dosent click the work item. In some cases the agent clicks the user decision workitem but dos't take any a

  • InDesign Cross References with DTP's Cross References PRO

    There are already posts all over the forum about how inter-document cross references in InDesign are "fragile" and slow and can cause crashing, which I recently learned the hard way. We tried to live with the slowness and the breaking links, but the

  • Frequent WLan disconnections on Equium M40X-230

    My laptop suffers frequent disconnections from the internet and it is getting very annoying. Situation is the laptop connects wirelessly to the net via a Belkin router. The router is working ok, and I use Aol for ISP. Our second laptop, also a Toshib

  • Looking for an SQL query to retreive callvariables + ECC from a RUN SCRIPT RESULT (Translation to VRU)

    Hi Team, I am looking for an SQL query to check the data (ECC + CallVariable) received following a RUN SCRIPT RESULT when requesting an external VRU with a Translation Route to VRU with a "Run External Script". I believe the data are parsed between t

  • Custmer return packaging matl with valuated SIT

    Hi Experts we have a sales order with FG as first line item and cylinder as second line item (cust. returnable packaging item). We use valuated SIT process. Upon entering VLPOD, the cylinder gets posted as goods issued item in stead of posting as spe