How do I get signal from my Roland Fantom G8 to Logic Studio or GarageBand?

My computer recently crashed, and since then I have not been able to record any music into either Logic Studio or GarageBand.  I need to get back up and running ASAP, as I'm in the middle of recording music for 5 different projects.  Here's all the gear that I have:
-1 Roland Fantom G8
-1 iMac with Logic Studio and GarageBand
-1 M-Audio Fast Track Ultra
-2 Rokit KRK Monitors
-1 USB cable
-1 midi cable
-2 1/4-inch cables
-2 1/4-in to XLR cables
The 2 1/4-inch cables run from Balanced Outputs 1 and 2 on the back on the Fantom G8 into Inputs 1 and 2 on the back of the Fast Track Ultra.  The 2 1/4-inch to XLR cables run from the back of the 2 KRK monitors into Outputs 1 and 2 on the back of the Fast Track Ultra.  The Fast Track Ultra is powered via USB cable that runs into a USB port on the back of my iMac.  The midi cable runs from the "Computer" port on the back of the Fantom G8 into a USB port on the back of my iMac.  This is the exact set-up I had before my computer crashed, and I was able to record just fine.  When I open up the audio preferences on either Logic Studio or GarageBand now, it recognizes the Fast Track Ultra; however, it does not recognize the Fantom G8.  What I'm trying to do is get signal from my Fantom G8 into both Logic Studio and GarageBand.  I also want that sound to then project through my KRK monitors.  I also want to be able to record audio and midi.  Please help me!!!

I used the Fantom for several years and did exactly what you want to do. I simply plugged my Fantom into a channel on my mixer, in your case the 003. I ran a firewire out of my mixer (Presonus Studio Live) into my computer using Logic Pro X. Then I just assigned that incoming channel to a channel strip in Logic. As an example I used stero channel 9/10 on my mixer, (plugged in the Fantom here). Then the signal went via my mixer firewire to computer running Logic. I assigned my channel strip input to channel 9/10.
Does this make sense?
I just sold my Fantom last week and purchased a new Yamaha Motif XF8. Now I am trying to figure out the same thing on it.

Similar Messages

  • How do I get signal from Digital Optical input (Extigy) to the Creative PlayCent

    How can I rip MP3's from the Digital Optical input on the Extigy? The PlayCenter does not seem to have any interest in the Extigy/USB as an input source. Thank you for your help!!?

    Since you are talking about variables, I suppose that you are using CP4, right?
    There is a fine tutorial in de CP4-help, chapter 'Variables and advanced actions', 'Tutorial on scripting' which explains more elaborately what I will try here:
    Create a user variable, p.e. named 'vName'  (Project, Actions, sheet Variables)
    Ask the user to enter his name in a Text Entry Box; in the properties of this TEB, sheet Advanced you indicate that this name should be put in your variable 'vName'
    Wherever you want to show this name, create a Text Caption and insert your variable by the button 'Insert variable'; this button is present in the properties window and also in the formatting toolbar if you are editing in place (look for X and and arrow); the variable in the text caption will show as '$$vName$$' and in the published SWF you will see the username.
    Hope this could help you, but please check the tutorial.
    Lilybiri

  • How do I get Autofill from Sarari to work on Yahoo. mail

    How do I get Autofill from Sarari to work on Yahoo.mail?  Autofill works on other sites, but will not remember username and passwork in Yahoo.mail.
    Thanks

    After hours restoring phone and resetting all my accounts and settings the Bluetooth is back on. Not sure how long this will last. In regards to AirPlay taking over, I had to drive far enough from our wifi signal to allow the Bluetooth to take back the audio. Its working for now.

  • How can I get values from listbox?

    Hi all,
    I need to get price values from Price List (Inventory -> Item Master Data screen). It's important to get values from field 'Price' BEFORE item will be added/updated.
    How can I get values from Pricelist listbox?
    Thanks for any suggestions or short sample code.
    Best regards,
    Andy

    Hi Andy
    Here is som sample code that will get the description of the price list and also the price that is displaying at the time. The item master must be open for this snippet of code
      Public Sub GetItemPriceFromOpenWindow()
            'this is assuming item master is open
            Dim oEdit As SAPbouiCOM.EditText
            oEdit = SBO_Application.Forms.GetForm("150", 1).Items.Item("34").Specific
            SBO_Application.MessageBox(oEdit.Value)
            Dim oCmb As SAPbouiCOM.ComboBox
            oCmb = SBO_Application.Forms.GetForm("150", 1).Items.Item("24").Specific
            SBO_Application.MessageBox(oCmb.Selected.Description)
        End Sub
    Hope it helps

  • I have a 120gb Classic that has no space left on it. i am going to buy a larger gb capacity ipod as soon as i get clearer instruction on how to get the old ipod content to the new ipod. How do you get content from one ipod to the other?

    how do you get content from one ipod to the new one? my content is on an external hard drive not on my pc and i have run out of space on my 120gb classic. can you get old ipod content to new? my itunes has only got short cuts, the real content is on an external drive? can this be done?? please help

    If the content is on an external drive, but your library knows where to find it, then it should all work. Connect your device, make some selections for what to put on it, and sync. If, on the other hand, your current iPod is the only place holding some of your media then see this user tip: Recover your iTunes library from your iPod or iOS device.
    tt2

  • My iphone is broken and i am getting a new one sent out. How do i get everything from my old phone copied to the new one so its exactly the same??

    My iphone is broken and i am getting a new one sent out. How do i get everything from my old phone copied to the new one so its exactly the same??

    As long as they are already ticked in your iTunes then yes. Just to check do a sync and as long as everything stays the same you are good to go.

  • How do I get music from one account to another?

    How do I get music from one account to another? I have music on one account that I no longer use and need to get my music off of it and put it on my new account without repurchasing all my music again

    Click here and ask the iTunes Store staff for assistance.
    (115549)

  • When I use Home sharing, I can see the library I want to copy, but when I highlight the library, the import button does not show up. Also, it will not let me drop and drag. How do I get music from one computer to the other computer?

    When I use Home Sharing, I can see the library I want to copy under Shared, but I can't get it save on the computer under the regular library. I go to edit and "select all" but there is no import button that is in the right hand corner. Also, it will not let me click and drag the music. How do I get it from one computer to the other?

    Since both computers are connected via the network, you could simply copy the ENTIRE iTunes folder from one computer to another via the network.
    If both computers are running Windows, use the Easy File Transfer Utility built into Windows to move iTunes and all other user media/data.

  • How do I get songs from one Mac to another?

    How do I get songs from one Mac to another?

    iTunes for Mac: How to copy purchases between authorized computers
    Regards.

  • HT203167 lost my hard drive how can i get songs from ipod back to new computer

    I lost my hard drive and want to get my music back on my new computer. How can I get songs from my ipod to my computer? I am afraid to sync it and losing what is on my ipod. Any help would be appreciated.

    It has always been very basic to always maintain a backup copy of your computer for this very occasion.
    Use your backup copy to put everything back.
    If for some reason you have failed to maintain a backup, not good, then you can transfer itunes purchases from your ipod:  File>Transfer Purchases

  • How can I get Data from the Sound cart in Labview? Does a VI exist?

    How can I get Data from the Sound cart in Labview? Does a VI exist?

    Yes, there are VIs for acquiring data from Sound cards. And examples too. If you don't have LabVIEW yet, do a search on NI's site for example VIs.
    Khalid

  • How do I get songs from iPod(video) to iTunes(7 and using VISTA).

    How do I get songs from iPod(video) to iTunes(i'm using iTunes7 and Vista).
    I don't have the disc, cause i can't find it. But my computer downloaded the ipod, it just cant find the files?
    i've been looking through the topics for the past hour and none of them helped. Maybe i'm stupid i dont really know, but i've restored my old computer a couple times and i found a post and it helped both times. now i can't find it anymore.
    THIS IS THE ONE I'VE BEEN SEEING AND IT DOESN'T HELP ME ONE BIT:
    Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
    Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod to a computer
    The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews and comparisons of some of them here:
    Wired News - Rescue Your Stranded Tunes
    Comparison of iPod managers
    TuneJack Windows Only
    iPod2PC Windows Only
    iGadget Windows Only
    iDump Windows Only
    SharePod Windows Only
    iPodRip Mac & Windows
    YamiPod Mac and Windows
    Music Rescue Mac & Windows
    iPodCopy Mac and Windows
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.
    Can someone give me a link, or tell me one that shows step by step.

    Here is a way of doing it, for another take on this, search the forum for posts by Zevoneer.
    Copy from iPod to PC
    It is important not to allow your iPod to sync with an empty library. If it is set to synchronise automatically you will get a message saying your iPod is linked to a different library and asking if you want to sync – it is important to press cancel as syncing with an empty library erases all music from your iPod.
    You can also prevent auto sync by holding down shift & ctrl as you plug in your iPod and keeping the keys held down until the iPod appears in iTunes.
    Once you are connected, you need to set your iPod to manage music manually.
    http://docs.info.apple.com/article.html?artnum=61148
    If you have an iPod with iTunes Store purchases on it, you can use it to copy your purchases to other authorized computers.
    http://docs.info.apple.com/article.html?path=iTunesWin/7.3/en/2586win.html
    However this is not allowed for other music.
    This MacMuse tip tells you how to copy music from your iPod using Windows Explorer, but it is a bit fiddly:
    http://discussions.apple.com/messageview.jspa?messageID=797432
    Otherwise you can use third party software to manage the transfer, there are a variety of programs out there, some free and some that will copy ratings and counts as well as the music files. Here is a selection, check them out and see what suits you.
    http://www.yamipod.com/main/modules/home/
    http://www.floola.com/modules/wiwimod/index.php?page=WiwiHome
    http://www.ipodsoft.com/site/pmwiki.php?n=igadget.Homepage
    http://www.copytrans.net/
    You can find others by Googling: copy iPod to iTunes
    There is a useful background article on copying from your iPod here:
    http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/

  • HT1373 How do I get music from iCloud to my ipad

    How do I get music from iCloud to iPad and iPhone 4s

    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How can i get contacts from my old Nokia phone to iphone 4S

    how can i get contacts from my old Nokia phone to iphone 4S?

    Appreciate the reply thank you
    Issue being is I don't have the lead for the samsung any longer but have the memory card?
    An yes I know I need to get them onto my MAC but how is what i'm struggling with?
    Any help would be appreciated.
    Many thanks

  • How can i get data from another database SQL Server use database link from

    I have a database link from Oracle connect to SQL Server database with user cdit connect default database NorthWind.How can I get data from another database(this database in this SQL Server use this database link)?

    hi,
    u should see following documentation:
    Oracle9i Heterogeneous Connectivity Administrator's Guide
    Release 1 (9.0.1)
    Part Number A88789_01
    in it u just go to chapter no. 4 (using the gateway),,u'll find ur answer there.
    regards
    umar

Maybe you are looking for

  • Hp aio remote app on iPhone won't scan to my hp photosmart 7515

    hp aio remote app "there was a problem during scanning. check scanner and try again" when using hp photosmart 7515 however this is a new issue the app scanning worked before. Also I can no longer print or scan unless at home and connected to my netwo

  • Error in activation of DSO

    Hi all, we are geting an error while activating the data of a DSO. ERROR: The object is locked by user RFCUSER. We tried to go to sm12 to see the List. We have two entries in the list related to that DSO. Please suggest. Thank You.

  • Can no longer connect for audio or video chat : Error -8 drama

    I've been video and audio chatting to Europe for quite some time with no problem. After installing a new modem (Motorola Surfboard SB5101) I'm now getting the dreaded Error -8 and can not connect for either audio or video. Text works fine. I've poked

  • My Skype to Go number is currently busy try your c...

    I've used my Skype to Go number many times before including yesterday morning successfully.  however today and in the last couple of weeks sometimes I'm getting the message that my Skype to Go # is busy.

  • How to enforce position after decimal point

    Hi, i need to enforce a position after the decimal point in an SAPScript Form. The Form is MEDRUCK_RV and the field ist RM06P-PRMG1. I tried to enforce it with RM06P-PRMG1(Z9.1) but it doesn't work. I need to cut the left-hand zeros and display one p


HashFlare