How do I get sound out of all 5.1 speake

Thanks for the answer to my last post. Sound very slightly comes out of the rear and center speaker. Maybe my question should've been, how do I raise the volume of the rear speakers? IS it at the CMSS screen? Thanks again.

You should certainly get the sound coming from your TV if you are streaming there from your Mac. Can we assume you are streaming via iTunes?
Which versions of the following are you using --
MacOS
iTunes
Apple TV
Was this previously working and now is not? If so, what has changed since it was working?

Similar Messages

How do I get sound out when I plug in a USB mic?

How do I get sound out when I plug in a USB mic? I cannot hear my instrument tracks either. It will record my vocals, but I can't hear them. If I unplug the mic and restore the internal devices, then I can hear all tracks, including the vocals. I'm sure there's a simple solution.

Hi
Prior to Logic 9, you cannot separately choose Input/Output audio devices, so you either have the USB Mic, or the Built-in audio (or an external audio interface).
To set up for 'mixed' devices, you need to use AudiMIDI Setup (Utilities folder) to create an Aggregate Device.
http://support.apple.com/kb/HT3956
Note that I recall that it was 'sensitive' to which order you create the devices with some USB Mics.
HTH
CCT

How do I get sound out of my tv and not my macbook pro when I am streaming?

I don't know how to get the sound, when I am streaming, to come out of my tv rather than my macbook.
Thanks.

You should certainly get the sound coming from your TV if you are streaming there from your Mac. Can we assume you are streaming via iTunes?
Which versions of the following are you using --
MacOS
iTunes
Apple TV
Was this previously working and now is not? If so, what has changed since it was working?

How do I get sound out of the HDMI?

Hi!
The headline says pretty much what I want to ask.
I tried to connect my Samsung LED TV to my MacBook Pro using an HDMI cable and an adaptor from HDMI to Thunderbolt (the little lightening-port). I bought an adaptor that supports sound transfer so that should not be the problem. I chose audio-in from the proper HDMI channel on my TV but the sound is still coming out from the laptop and the TV says nada...
Anyone have an idea what I might missing?
Jonas

eww wrote:
tjk: I think the quoted message simply indicates that there is no output volume control provided within the computer when the HDMI connection is the selected output device. This standard message appears because the audio signal sent via the HDMI cable is digital, not analog. When the audio output is digital, whether it's via mini-Displayport or a mini-TOSLink connection to the headphone port, the volume is always controlled externally — by the TV set, amplifier, receiver, or powered speaker system to which the signal is sent, not by the computer. A digital audio signal contains no volume information. The device that converts it to an analog signal and relays it to the loudspeaker(s) must provide the volume information.
Thanks eww, I was not aware of that. Makes perfect sense.
Poor, I'm not sure where that leaves us, but if the TV is on and the volume turned on/not muted, and still no audio coming through, I'd try a PRAM Reset and an SMC Reset:
PRAM Reset: http://docs.info.apple.com/article.html?artnum=2238
SMC Reset: http://support.apple.com/kb/HT3964

I Get No Sound Out of My iPad - How Can I Get Sound?

I can't get any sound out of my iPad.The lock sounds switch on the side of the iPad is set to provide sounds. The volume switch next to the lock sounds switch is set to full volume. I have a number of apps that are much better if sound is enabled. There is no sound for these apps. The Options in the apps are all set to "sound." I have re-booted my iPad. Still no sound. I have gone into Settings/Sounds. I don't see anything in there that involves the master sound system for the entire iPad - only sound setting for individual apps.
I have several manuals. I have combed through them - nothing. It's like how to turn the master sound on or off for the iPad is some kind of huge secret that no one wants me to find out about.
Let's fool 'em, hey? Tell me how to get sound out of my iPad. I will be forever grateful.

Never mind - I got it. It has to do with the Rotation Lock and Mute switches in Settings/General.
How did I figure it out? Google.

I'm trying to make a slideshow in iMovie, but when I upload photos from my Aperture Library into the iMovie Photo Browser some photos (305 out of 427) are missing. How do I get iMovie to upload all of them?

I'm trying to make a slideshow in iMovie, but when I upload photos from my Aperture Library into the iMovie Photo Browser, some photos (305 out of 427) are missing. How do I get iMovie to upload all of them?

I have same problem. I could only see a fraction of my project photos if I browse the Aperture lbrary. It is the same problem when I sync the aperture photos to my iPhone or iPad. I still cannot solve it but I know a way to go around it for your iMovie to see the pictures so that you can work on your iMovie.
Here is the work around:
Export the photos from your album to your hard disk and re-import into your iPhoto. Now you should be able to see those photos that you want to work on in iMovie when you browse your iPhot library.

The charging cable now longer fits all the way in the charging port. I can't see if any lint is in there, but if there is how can I get it out?

the charging cable now longer fits all the way in the charging port. I can't see if any lint is in there, but if there is how can I get it out?

Go to the Music section of your Library (very top-left corner) and see if your songs are there. The "Purchased" playlist may have been deleted or gotten corrupted, but if that happens it's not a big deal because your music should still be in your main Music Library.
If your music is NOT in the Music section of your Library, then go to the iTunes Store homepage and find the Quick Links list on the right side. At the top of that list, click Purchased and you can redownload all of your previous content that you might have lost.

İ have an hp 3052 all in one.how can i get print out with ipad or iphone?

İ have an hp 3052 all in one.how can i get print out with ipad or iphone?

Hello,
Try following the instructions here http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02623193&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
If that does not help, let me know and I will see what I can do.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

My iphone is in recovery mode and i cannot restore it with itunes on my macbook or my pc. how can i restore my iphone 4s? or at least, how can i get it out of recovery mode?

i tried to restore my iphone 4s because it kept saying "searching..." for service so i decided to restore it, after having already reset all network settings, and after trying to restore all settings. still, it only said "searching..." for service. finally, i tried to restore my iphone. when using my macbook, 3/4 through i recieved a message to update my itunes software. i had to close itunes for the update. when i closed itunes, the iphone restore was in pprogress and having to close the program put my phone into this "recovery mode" with the icon of the usb and the itunes disc logo. i also tried updating and restoring the software with my pc which also didnt work. help?

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

How can i get the list of all users present in the LDAP

Hi Experts,
How can i get the list of all users present in the LDAP ?
Is there any API or function Code to get all user list??
Please help me out!!!
Help will be rewarded

Well it will depend on exactly where your UME configuration points to in the LDAP tree but yes, it is possible to get all users. Something like the following should do it:
import com.sap.security.api.*;
import com.sapportals.portal.prt.component.*;
IUserFactory iuf;
ISearchResult isr;
IUser user
String userid;
iuf = UMFactory.getUserFactory();
isr = iuf.getUniqueIDs();
you will need to iterate the ISearchResult object but you can get IUser objects by
userid = (String)isr.next();
user = iuf.getUser(userid);
then you can imanipulate / identify / or whatever you need with the user object
Haydn

How can i get the list of all users present in the UME ?

Hi Experts,
How can i get the list of all users present in the UME ?
Is there any API or function Code to get all user list??
Please help me out!!!
Help will be rewarded
-pankaj chouhan

Hi Pankaj,
find the official NetWeaver security javadocs (including access to UME) <a href="http://help.sap.com/javadocs/NW04S/current/se/index.html">here</a>. Look for classs UMFactory and proceed from there.
Best regards,
Martin

Can't get sound out of safari

hey all,
i am not able to get sound out of my mac?! And thats only on Safari. I cant watch any videos now! please help.
thanks in advance

Hi
I'm far from an expert on "sound" issues. I believe OS X's sound file is designed to be functional for 16 bit sound files, not 24 bit. 24 bit sound file offer enhanced sound quality, but are larger in size. Perhaps not yet practical for web sites.
explaining the difference between the two settings.
Thanks for the green star.
Aloha from Big Island
iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac OS X (10.4.9) Seagate 300 gb ext. HD Canon i960 printer, Airport Express (2 units)

How do i get video out to connect to aprojector

How do I get video out of my Ipod touch(4th gen) to connect to my projector. I have the correct cable and the projector work fine when connected to my laptop, mirrors the creen correctly But I cannot get an output from my Ipod.Cheers

hi
I think I have found the app, I was not seeing the obvious, so I can now play videos on the Ipod itself. With regards the cable it is a Dexim unit which plugs into the long Ipod socket on the base.From that unit there is a cable terminated with jackplugs.One end into the dexim unit another into the projector. As I said it worked fine on a 2nd generation, I just played the video on the 2G Ipod and it came thru onto the projector. Hence my thought that it was a setting and/or app on the 4thG Ipod.
Again many thanks for all your help, at least it is improving my knowledge of Ipod
Cheers
PS started with the ipod download guide but the problem isnt addressed hence my plea on this forum.
PPS I've emailed Dexim to see if just in case the unit I have isn't compatible with 4thg Ipod for some reason

My charger is stuck in USB port of my car , how can I get it out without damaging either ?

The charger that came with my iPhone 5c is now stuck in the USB port of my car. How can I get it out without damaging either?

Use this article: If you can't update or restore your iOS device - Apple Support
Best of luck! And since you didn't back up your data previously, all your data is lost. Make sure to use the free backup services of iCloud or iTunes.
iOS: How to back up and restore your content - Support - Apple - http://support.apple.com/kb/HT1766

[SOLVED] Connecting my guitar to my pc and get sound out?

I have a guitar and a cable that came with the game Rocksmith for ps3. The cable is a regular guitar cable with a usb out. Is there any software that I could use to get sound out from my pc. When I connect it to my pc, it recognizes my guitar as a microphone. I searched and all I found was some $500 windows software. Thank you for all the help.
Last edited by lazarojhr16 (2012-12-19 13:57:40)

creatid wrote:
If you have a decent sound card this might work for processing the guitar sound, but I haven't tried this myself even though I have the cable. It basically depends on what is put out through the usb cable. You might want to install some audio recording software, treat the input as a microphone and see what is being captured.
However, it is probably a better idea to connect the guitar directly to the sound card with a regular cable (through a mixer or with an adapter). The translation process in the cable will very likely only add latency. A bit more information about what you are trying to accomplish will get you better answers :-)
I just wanted to get sound out of my computer because I have no amp or any money to buy one right now. I have some nice computer speakers and thought that the cable might work since it is a usb. I'm not using my ps3 because it broke or else I would just use my tv. But thanks for the idea. I'll keep looking around.

How do I get sound out of all 5.1 speake

Similar Messages

Maybe you are looking for