How do I get the bold, underline, italics editing option for Notes on iPhone 5 iOS 7.0.4? Option is not appearing when I select text.

When I select text, I don't get an arrow with additional options. What is shown in the image are the only options I get. Is there something I need to do in Settings or something in order to be able to bold, underline and italicize text?
I     

I only have an iPod (but it does have the latest software) but I achieved bold text as follows:
1) touch and hold word to embolden;
2) touch Select;
3) touch the arrow head at the right;
4) touch BIU option section of the option bar;
5) touch the Bold section of the option bar.
Having selected the text, the selection can be narrowed or widened using the blue dot.  Also, the Bold, Italics and Underline option bar does not disappear once a section has been made, thus bold and underline can be chosen - touch elsewhere on the screen to remove the option bar.  When the selected option bar section background turns grey the software has accepted your request.  Note that a first go at achieving this might not work if the software has not correctly picked up your touch and may not present you with the correct options - it is intuitively trying to help you and sometimes misunderstands your touch.

Similar Messages

  • How do I get the lyrics on iTunes to show up on my iPhone 4 iOS 6?

    I put lyrics in the lyrics section of the songs on iTunes but when I sync it to my iPhone they won't show up. Is there something I have to do to make them show up or are lyrics disabled on iOS 6. I they can be put on my iPhone then could you tell me how to do it step by step? I just want to make sure I'm doing it right.

    Plug your phone into your computer... Select what music you want to sync to your phone using iTunes on your computer.

  • HT204053 If I have an apple ID for myself and my wife has just got a iPhone for the first time how can she get the same apps as I have for my iPhone and iPad

    If I have an apple ID for myself and my wife has just got a iPhone for the first time how can she get the same apps as I have for my iPhone and iPad by getting it off my iCloud?

    She can't from iCloud without setting up your iCloud account on her phone. But just sync the same apps from your iTunes Library on your computer to her phone.
    Your wife should setup her own iCloud account - which is separate to the iTunes Store accounts.

  • How do u get the Ipod touch to group compilations for browsing ?

    How do u get the Ipod touch to group compilations for browsing ?
    With Itunes 9 like earlier versions u have the option to group compilations for browsing, having the effect of not putting a huge list of artists in your view by artist list because they played one song on a compilation you have got. With my old Ipod classic this option was also available through the setting menu. Meaning my ipod exactly mirrored my itunes lists.
    I have recently purchased a ipod touch 32 and can find no settings that allow me to do the same. My artist list has risen from 200 to 400 because of this and makes finding albums by artists very annoying.
    I have looked on the itunes software and can find no mention of syncing this ability to the ipod either.
    Help
    Mike

    Yes i do this to group compilations in itunes.
    But when i then sync to the ipod touch the albums come up under compilations as desired but the artists also appear in the artist list which is not.
    On my old ipod classic it had a setting to group compilations the same as in itunes which would then remove these odd artists from the artist list.
    I can find no equivalent setting on the ipod touch
    Cheers
    Mike

  • How can I get the direction handles to show up for the Position attribute?

    How can I get the direction handles to show up for the Position attribute?
    I have CS3 and I did the formentioned test and was able to make the handles work for the scale attribute but they don't seem to show when editing the position values.
    *I am in the graph editor looking at the "value graph"
    *I select the keys and convert the keys to auto bezier (I also tried the ease in and out buttons)
    *It changed the graph the way you might think (no longer linear) however the handles are not showing to edit further.
    *I also tried using the "convert vertex tool" (part of the pen tool) and still no luck getting those handles.
    *the handles only show up in the speed graph but that does me no good.
    Please help!
    THANKS 

    I don't have CS3 installed on any of my machines any more but your value graphs for position should look something like this:
    There are no handles for position in the Graph editor. You adjust the position curve by editing the motion path in the composition window. Press the G key to bring up the pen tool, then use the modifier keys Crtl/Cmnd and Alt/Option to temporarily switch between select and convert vertex to adjust the paths. Changes will be reflected in the value graphs. You will get editable handles with scale and rotation because these are not spatial properties. Spatial properties, position, Anchor Point, all XY & Z coordinates are edited in the comp window or in the layer window after revealing the properties. IOW, you edit anchor point position paths by opening up the layer window and choosing Anchor Point from the display options.
    The Manual isn't wrong. Here's a link to the live docs.

  • How do I get the Apps onto one Ipad only for Creative Cloud??

    We've downloaded onto 2 imacs Creative Cloud Software and there are not problems at this stage.
    How do I get the Apps onto one Ipad only for Creative Cloud??
    regards
    Rod

    This was part of the original thread you responded too but I have branched out your discussion to make it more specific.  This is already discussed under the Touch Apps FAQ - http://www.adobe.com/products/touchapps/faq.html.  Here is the relevant excerpt:
    Customers who sign up for an annual membership to Creative Cloud or who buy a 12-month prepaid card at a retailer or online store will be eligible for a free month of Creative Cloud when they purchase and sign in from three qualifying Adobe Touch Apps from Google Play or the Apple App Store. This includes Adobe Collage, Adobe Debut, Adobe Ideas, Adobe Kuler, Photoshop Touch, and Adobe Proto.
    Customers who purchase an annual membership directly from Adobe and qualify for this offer will not be charged for the month of service following sign-in from their third Adobe Touch App. 
    Customers who purchase a 12-month prepaid card from a retailer or online store and qualify for this offer will have one month added to the duration of their membership.
    Creative Cloud members will be notified about their free month within 60 days of signing in to their third qualifying Adobe Touch App

  • How do i get the toolbar to authorize my comptuer for the itunes store? using vista

    how do i get the toolbar to authorize my computer for the itunes store usin vista? my computer does not display the tool bar.

    Authorization and Deauthorization
    Macs:  iTunes Store- About authorization and deauthorization.
    Windows: How to Authorize or Deauthorize iTunes | PCWorld.
    In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
    More On De-authorizing Computers (contributed by user John Galt)
    You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
      1. Open iTunes on a computer
      2. From the Store menu, select "View my Account..."
      3. Sign in with your Apple ID and password.
      4. Under "Computer Authorizations" select "De-authorize All".
      5. Authorize each computer you still have, as you may require.
    You may only do this once per year.
    After you "de-authorize all" your authorized computers, re-authorize each one as required.
    If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

  • HT201269 my iphone 5 has been destroyed and wont work or even charge but i was wondering how i could get the pictures and videos off of it to my iphone 4?

    my iphone 5 has been destroyed and wont work or even charge but i was wondering how i could get the pictures and videos off of it to my iphone 4?

    Connect the 5 to a computer and see if it is recognized. If so copy the pictures from phone. If not, you are out of luck.

  • How can i get my macbook pro too stay on and not sleep when lid is closed?

    how can i get my macbook pro too stay on and not sleep when lid is closed?

    If the machine is asleep, lid closed, and you plug in to an external monitor and an external USB keyboard, the machine will wake, anbd reconfigure the screen resolution for the external monitor, Once it has made this configuration change, you can open the lid and it will continue to address only the external monitor.  At least that's how my early MacBook Pro unibody 13" works. It seems to run a bit cooler this way. It gets quite toasty with the lid closed while doing anything demanding and you are more likely to hear the fan come on.  I have not seen any temps that would cause alarm, but I do get a high speed (6000 rpm), noisy fan sometimes with the lid closed, .
    If you operate in the open-lid, external monitor only mode, if you deactivate the monitor for any reason, when it reactivates it will be running both screens, with all the navigation hassles this entails, so I generally set it not to deactivate the screen when in this mode.
    Thus I agree with those who say that some of the cooling air is drawn in around the keyboard, the difference in cooling performance is observable.  If you activate istat pro, get the computer hot running in clamshell mode, and open the lid, you can watch the CPU temp drop by a few degrees C within a couple minutes.  It isn't a huge difference, but enough the lower the fan speeds.

  • Installed itunes update 10.5.0.142 and now get the error message "Disc Burner or Software Not Found" when trying to burn playlist to disc.

    Installed itunes update 10.5.0.142 and now get the error message "Disc Burner or Software Not Found" when trying to burn playlist to disc.  Windows 7

    Hello queenabs,
    It sounds like you are trying to burn a playlist to a disc in iTunes, but you are getting the error, "disc burner or software not found."  I found a couple of resources that I think might help with an error like this.
    I recommend starting with the steps in this article:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
    http://support.apple.com/kb/TS2308
    If you are still having trouble with burning a disc after following the steps in that article, I recommend following the steps in this article:
    iTunes for Windows: Additional troubleshooting tips for burning issues
    http://support.apple.com/kb/TS1374
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I just received my new phone from Verizon, I turned it on and followed direction for set up...now I lost my connection with ATT....How do I get the service back from ATT...not due to change until the 16th

    I just received my new 6 from Verizon by mail.  I was not due to change carriers til the 16th, but I turned on the new phone and did the set up...now I lost ATT.  How do I get the ATT carrier back on my old phone?

    I just received my new 6 from Verizon by mail.  I was not due to change carriers til the 16th, but I turned on the new phone and did the set up...now I lost ATT.  How do I get the ATT carrier back on my old phone?

  • How do I get the bean property to JSP page for use in a Scriplet

    Hi all,
    I am new to JSF and would like to know how can I get the Bean property to a JSP page and then use that property to dynamically display the contents.
    Thank in advance,

    Hi,
    I think the following page will be helpfull.
    http://java.sun.com/developer/technicalArticles/javaserverpages/JSP20/
    Akif

  • HT4972 I don't have the software updates in my general settings so how do I get the software updates I'll need for Facebook & instagram etc?

    I don't have the software updates in my general settings so how do I get the updates to use instagram, Facebook etc? Any help appreciated

    The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • I bought my software pack iWork 2008 at the apple retail store and I cannot get any updates and apple App Store won't help me.   Does any one know how I can get the upgrade without paying full price for a second time? I paid $99 for the iWork family pcan'

    I cannot believe that apple is refusing to help a customer who bought and paid for iWork software just because I bought it from the retail store the App Store says they cannot allow me to upgrade.  I have never heard of such.  It should to matter where I got it i bought apples software and I don't et how the retail store can be different frothe App Store my god its all still apple.  So stupid.  I will not pay full price for the upgrade.   Also I purchased Logic Studio and 2 days later the upgrade came out and they will not let u upgrade ?  I think there should be at Least a 30-45 day window if u purchase software and they release the upgrade u should get not.    It's not like apple doesn't make enough money already.  

    iWork '08 & 09 installed from the retail disk or from the downloaded trial must be updated through Software Update. Those installations will not be recognized as installed by the Mac App Store. In Mountain Lion Software Update has been "rolled into" the Mac App Store. Choose Software Update from the Apple menu just like you always have & the Mac App Store will launch. Depending on what you have that needs updating you may see two sections in the MAS window.
    But, as always, if you're not running the latest versions of the iWork apps installed from a retail box or the downloaded trial & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. If you installed from the downloaded trial or the retail box, they must be in the iWork '08 folder in Applications. That iWork folder must be named iWork '08. If it doesn't have the '08 Software Update won't find them & the updaters won't work.
    If you are running Pages 3.0.3, then you do have the latest version of Pages from iWork '08. If you want to upgrade to iWork '09, you will need to purchase the new version, just like everyone else. The good news is that you can buy just the individual iWork apps - Keynote, Pages & Numbers - that you need or want for $20 US each from the Mac App Store & then install them on as many Macs as you need using the same Apple ID.

  • How can I get the correct Ship To (KNVP-KUNNR2) for a Sales Document?

    I am trying to generate a report that will (among other things) display the Ship To ID and Name for a given Sales Document.  I know the following information:
    VBAK-VBELN - Sales Document
    VBAK-VKORG - Sales Org
    VBAK-VTWEG - Distribution Channel
    VBAK-SPART - Division
    VBAK-KUNNR - Sold To Party
    I know that the table KNVP will return a list of Ship-To Customer numbers (KUNNR2) for a Sold-To Customer (VBAK-KUNNR) if I also filter by VKORG, VTWEG, and SPART (using SE16N).  What I don't know is which one of the returned values is being used in a particular Sales Document.  The customer in question has 29 Ship-To locations.  How do I find out which Partner Counter (KNVP-PARZA) the Sales Document uses? I don't know where that value would come from.  Once I can get the correct Ship-To Customer Number, I should be able to search the table KNA1 by WHERE KUNNR = KNVP-KUNNR2 and return KNA1-NAME1 for the Name of the Ship-To location.

    For a sales document?  Use VBPA with PARVW = 'WE'.  Also, use the ADRDA field to determine whether the address on the document has been manually changed.  In any case, you can use one of the many address management functions or just ADRC directly to get the name, address, etc., using the ADRNR field from VBPA or if the address is from the customer master, KNA1.

Maybe you are looking for

  • Problem in performing multiple Point-In-Time Database Recovery using RMAN

    Hello Experts, I am getting an error while performing database point in time recovery multiple times using RMAN. Details are as follows :- Environment: Oracle 11g, ASM, Database DiskGroups : DG_DATA (Data files), DG_ARCH(Archive logs), DG_REDO(Redo l

  • How to change numbers of PDF file in Adobe Acrobat Pro Extended #9

    I just combined 3 PDF files that had their own numbering into one. I have searched how to change this file into a consecutive numbering with no success. I do the steps outlined to open the Number options, but when filling in the blanks, and making ch

  • Aironet 350 in Mac OS9: 128-bit WEP possible?

    Aftermarket-like, I have acquired a lovely Aironet PCM-352 card complete with the drivers on CD. I installed them with apparent success on my PowerBook G3 which runs OS 9 (OS X no-go due to FireWire issues), but it doesn't allow more than 16 hex digi

  • Legacy_run do not start automatically in 1/06 release

    Hi, All of the legacy_run services (/etc/rc*) fail to start upon reboot after jumpstarting a server with Solaris 10 1/06. It's seems as if svc:/milestone/multi-user-server:default is disabled by default in the Solaris 10 1/06 realease; this was not s

  • ITunes freezing after about 5 minutes on one account, works on other accounts

    background info: I have a 2008 black Intel Macbook 2.4 GHz with 2GB RAM. the problem that I'm having is when I run iTunes , after about 5 minutes even if I'm not downloading or playing music, the program starts to slow down and I get the rainbow beac