How do I get the Stop Time to work?

I'm trying to get an iTunes purchased (protected) movie to only play a certain section of the movie. I'm running iTunes 10.7 on a Macbook Pro w/ Mountain Lion.
I select the movie in iTunes, get info, go to options, enter a start time and enter a stop time. When I play it, the movie starts at my designated start time, but won't stop at the designated stop time. It just cruises right through it. I tried doing this on the movie in the library, and I created a playlist with the movie and they both behave the same.
Is this a bug, or am I doing something wrong?

Robbie,
That sounds like a bug.  You can report it to Apple at this link:
http://www.apple.com/feedback/itunesapp.html

Similar Messages

  • How can I get the elapse time for execution of a Query for a session

    Hi ,
    How can I get the elapse time for execution of a Query for a session?
    Example - I have a report based on the procedure ,when the user execute that it takes say 3 min. to return rows.
    Is there any possible way to capture this session info. for this particular execution of query along with it's execution elapse time?
    Thanks in advance.

    Hi
    You can use the dbms_utility.get_time tool (gives binary_integer type value).
    1/ Initialize you time and date of beginning :
    v_beginTime := dbms_utility.get_time ;
    2/ Run you procedure...
    3/ Get end-time with :
    v_endTime := dbms_utility.get_time ;
    4/ Thus, calculate elapsed time by difference :
    v_elapsTime := v_endTime - v_beginTime ;
    This will give you time elapsed in of 100th of seconds...
    Then you can format you result to give correct print time.
    Hope it will help you.
    AL

  • How can I get the Date & Time to appear on my final project in iMovie11?

    I am using iMovie 11 and have imported video from a Canon Vixia-HF21 camera. The EXIF data is imported along with the video but when I produce the final product, the date and time do not appear.  How can I get the Date  & Time data to appear on the final product?

    There is a date and time Title you can use. If I recall correctly, it displays date plus hours and minutes, but not seconds.

  • How can i get the executing time of a IMAQ function.function could be IMAQ acquire IMAQ acquire.

    how can i get the executing time of a IMAQ function.function could be IMAQ acquire IMAQ acquire.

    Hello,
    This question was answered under a different category, here is the link:
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=5065000000050000004EBA0000&HTHREAD=000047694&UCATEGORY_0=_15_&UCATEGORY_S=0
    Regards
    Russell B.
    National Instruments
    Applications Engineering
    Engineering Team Leader
    G Systems, www.gsystems.com
    Certified LabVIEW Architect
    Certified Professional Instructor

  • In flash pro cc, how do i get the files i was working on previous session to open automatically?

    in flash pro cc, how do i get the files i was working on previous session to open automatically?

    cs4 had it 'on launch' --> last documents open, under general preferences. i don't see it in cc version, so i guess you're right. hard to understand, since it saved time.

  • How can I get the readability bookmarklet to work

    Firefox 3.6.8 in Windows XP Home on a Toshiba netbook. How can I get the "readability" bookmarklet to work? It works just fine in Camino on an Apple mini desktop computer running OS X 10.4.11 (Tiger.) Readability uses javascript, which I do have turned on. The problem (of it not working) doesn't seem to have anything to do with the NoScript add-on either, as I tried allowing everything on the page and it still didn't work. Any ideas of what to try next?
    ''Duplicate post, continue [https://support.mozilla.com/en-US/questions/746624 here]''

    Hi there.
    By chance, I too have the readability bookmarklet installed (but I don't use it that much, to be honest), and it works ok for me. It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.
    If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

  • How do I get the RSS feeds to work in iWeb'08 when published to FTP server?

    There are so many unresolved questions because I have published to an FTP server (Netfirms). HOWEVER, my next task at hand is to resolve the issue of a non-working RSS feed and download capabilities.
    The published website is www.vibrationalvoyages.com.
    When using Cyberduck to upload to Netfirms, I have to call the file name vibrationalvoyages.com because Netfirms organizes my files under a main folder called www (I also purchased the .org and .net extensions along with the singular spelling of the title, have forwarded those url's to the .com extension, which means I have different website names under Netfirm's main folder www, all pointing to www.vibrationalvoyages.com).
    I have to drop the www. in front of vibrationalvoyages.com when publishing to a folder on my computer so, when Cyberduck uploads the files into the main www folder, they are read correctly and published as www.vibrationalvoyages.com. In Cyberduck, the ftp address to upload is vibrationalvoyage.netfirms.com
    Before uploading, I use iTweak to insert the Statcounter tracking codes. Then, I use Rage to optimize the site to cut down on the weight (lots of photos). Then, finally, I get to upload which takes about an hour and a half.
    SO, HOW DO I GET THE RSS FEEDS TO WORK AS WELL AS THE OPTION TO DOWNLOAD AN MP3 RECORDED MEDITATIONS? I eventually also want to include the download option of podcasts.
    Please help! I am doing the best I can to stay in love with Mac but he is turning out to be a pot load of work and the love affair is wearing a little thin.
    I haven't even asked about why iWeb still calls some pages 'The family picnic" or why it switches the url addresses to the individual pages. Probably because in the early stages, I copied an entry rather than just do a new one... but I'll worry about that later. I want to get this 'fixed' first and then I'll address the issue, following Roddy's advice to another writer about installing a flash player, for easy download of the MP3 meditations and for when I record the lessons as podcasts. Until I get this RSS issue resolved, however, podcast downloads are out of the question!

    Thank you for checking, Tom,
    I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
    Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
    My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
    On both error messages, the URL I was checking was:
    http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
    The last URL was, of course, the URL generated by iWeb.
    So, my question still is:
    HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
    Any ideas?
    GG

  • How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room

    How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room?

    Welcome to the Apple Community.
    Unfortunately the Apple TV doesn't have a web browser so you can't do that.

  • Saved download for Camera Raw update. still can't open Raw pic in CS5. How do I get the downloaded files to work so I can open Raw images? thanks, Artist Ray

    Bought new camera to work with Raw images in CS5 but file would not open so I downloaded latest update. It only allowed me to save in a file ( could have OPENED instead of saving so I don't know those results). How do I get the new download to work in CS5?
    Thanks for your help, Artist Ray

    Bought new camera
    Which camera make and model?
    Supported cameras
    Camera Raw plug-in | Supported cameras
    Compatible Adobe applications
    Camera Raw-compatible Adobe applications
    Why doesn’t my version of Photoshop or Lightroom support my camera?

  • I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

    I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

    For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
    For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
    See: 
    http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html  
    Be well...

  • Answer: to How can I get the reset button to work.

    How can I get the reset button to work?: Answer
    Thanks to everyone who helped on this. You are awesome. Especially Ned!!  Posted here because I was unable to add more to the existing post.
    Here is the question:
    When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
    ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
        at flash.display::DisplayObjectContainer/removeChild()
        at AddATree2/onReset()
    When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
      Here is the answer:
    //when you click the reset button everything is removed from the stage
        //except the star, baclground, and reset button (trees and greeting REMOVED)
        public function onClear(Event:MouseEvent):void
                if (tree3) removeChild(tree3);
                if (tree2) removeChild(tree2);
                if (webText) removeChild(webText);
                if (tree) removeChild(tree);
                clickCount = 0;

    This is the answer to what to put in the onclear function.

  • How do I get the tint function to work in CS5?

    I rrecently installed CS5 In Design in Windows 7.  How do I get the tint function to work?

    This is how you create a tint:
    If it's not working, you might try restoring your InDesign preferences:
    Trash, Replace, Reset, or Restore the application Preferences

  • How can I get the right click to work in firefox -- it works in internet explorer

    how can I get the right click to work in firefox -- it works in interne

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • HT5012 How do I get the meddle button to work on my iphone

    How do I get the meddle button to work on my iPhone

    I Cannot use the meddle button on my p
    iPhone

  • How can i get the pressure brush to work in Illustrator CS6?

    how can i get the pressure brush to work in Illustrator CS6?

    yes i do, a bamboo. and pressure works in photoshop

Maybe you are looking for