How do I get usb superdrive to work with new macbook pro. superdrive rejects cd ?

Just purchased new system. (never had an apple before) so I am all at sea. followed the instructions to uodate the system. whenI inserted a cd with program to be installes foe a Mac, it was ejected. inserted a cd with 'jpeg files only on it it too was rejected, with no message. Am I missing anything?

I suggest you return the Apple Superdrive and buy any other brand external DVD drive that connects by USB port.
Any brand will work with your Mac, cost less and work better.

Similar Messages

How do I get Silverlight Plugin to work on new Macbook Pro?

Got a new MacBook Pro and tried to watch Netflix but I was prompted to install the Silverlight Plugin. I have the Silverlight dmg on my desktop but when I open it, the only thing there is the pkg file. Please help!

I have it on my mac from the latest Office for mac. It even updated after it was installed. My issue is that when I try to log in to my accont, it tries and then logs straight back out.
Any ideas on what's wrong?

HT2967 I have an iPhone and keep my calendar into it. I have synced all photos. How do I get the calendar to sync with my MacBook Pro?

I have an iPhone and keep my calendar into it. I have synced all photos. How do I get the calendar to sync with my MacBook Pro?

Enable iCloud on both, and Calendars on the iPhone should sync with iCal on the Mac wirelessly.

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Yes, I too had this problem.
I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
MacBook Pro Retina running 10.8.2 (12C54)
Lightroom running 4.1
Hope that helps.
aa

How do I get the sound to work on my macbook pro?

All of a sudden the sound has stopped working on my macbook pro. It only works when I plug in speakers or headphones. I've been into system preferences and nothing worked. The sound icon at the top right of my screen is greyed out... anyone help with how to get it working again?

System Preference > Sound > Output > Internal Speakers
Make sure Mute is not enabled.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 to flip the microswitch inside.
Sound output may be stuck in the digital mode.
Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964

I have an iPod G2 with a firewire 400 lead. how can I attach it to my new 13 inch Mac book Pro, is there a 400 to 800 firewire converter. USB lead wont work with the Macbook Pro. iPod used as an external drive to archive memory cards on the go.

My G2 iPod that I use as an external drive to archive memory cards on the go cannot link with my new 13" Macbook Pro cause it uses a firewire 400 lead. It will not work with a USB lead. Is there a firewire 800 ipod lead or converter available? Can any one shed some light on this please?

As far as I know, if a harddrive works with a Macpro, it should work with the Macbook: if your Macbook is low on power, plug in the AC adapter
If your Macbook has a firewire port, then it should be fine. BUt i would do somemore research first.

Question on how networking works with new Macbook Pro

Hi,
I have a question about how networking works with my new Macbook Pro. This is my first laptop so am new to mobile computing. I am about to configure it to replace my desktop which uses a wired DSL connection. Once I have my Macbook Pro configured to run off the DSL modem, what happens when I take this computer to a location that has ethernet? Will just plugging in the ethernet cable be enough to get on line? Or is there further configuration work that needs to be done?
I used a Windows laptop from work and all I had to do was plug it in to a hotel ethernet cable to get on line. However, this laptop was never configured to run on my DSL network so I am not certain if that makes things more complicated.
Thanks for your help!

Hi
Your MacBook Pro should just work when plugged into an ethernet connection.
Just check something, Open Network Preferences, you can select it from the Airport icon in the menu bar.
In the left-hand pane click on Ethernet and just check that it is set to configure using DHCP in the right-hand pane, that's it.
So when you plug in the ethernet cable it will ask the router for an IP address and off you go.
I assume that any system you plug into will use DHCP rather than static IP addresses. If it is a static IP address, you will need to manually configure the ethernet settings by inputting the IP address and subnet mask info plus DNS servers.
Usually it is done with DHCP and you don't have to do a thing and likewise your home DSL is DHCP?
If not then you will have to change your settings, make a 'Hotel' setting which you can use when in hotels and keep your 'Home' set-up for when you are at home. In the pull down menu select Edit Locations to add new ones.
Phil
Message was edited by: Philip Tyler

WD External Hard drive not working with new Macbook Pro

I have recently upgraded to a new Macbook Pro and when connecting a WD 1 TB Passport external hard drive, it doesn't appear on the MBP, but when I connect it to my old Macbook running 10.5.8, it appears normally. Is this a problem with formatting or an issue because it is USB 2.0...
Any help appreciated as I have a lot of data on the hard drive and would like to be able to use it with my new MBP.

I'm on Lion, with similar issues with two WD external HD. But what I found fixed the problem was to:
1. go to the manufacturer's website (in this case Western Digital),
2. locate my external HD, download the download.
For instance, I downloaded the WD Drive Utilities for Mac (for My Passport for Mac USB 3.0):
http://support.wdc.com/product/download.asp?groupid=219&sid=157&lang=en
Install the downloaded app.
3. Plug in external (this part, I think is important) directly into your tower or laptop (as opposed to through a USB multi-plug extender). Possibly this is because you access more power?
[I'm trying to remember in which order everything happened. But I think at this point the external hard drive mounted]
4. Install the software that is found on the external HD (in my case, it was a brand new device, so that had never been installed).
5. Run "WD Drive Utilities" and run diagnostics.
6. Test to see if it holds. Unmount the External HD. Unplug. Replug in and see if it mounts.
Note: I have not yet tested to see if plugging in the external somewhere other than directly into the tower also works. But I think the main problem is getting it to mount the first time and installing the software. That's what I think.

Will a Mini-Displayport to VGA adapter work with new macbook pro 2011

I was thinking of getting a mini-displayport to vga adapter for my external monitor I wanted to hook up but I wasnt quite sure whether it would work as my macbook pro has the new thunderbolt port, I was confused if the new port would only work with the thunderbolt displays. Could anyone help me as I'm not too sure what will work.

I tried the Apple miniDisplayport to VGA in a Thunderbolt MBP and iMac and they both worked. Same for the Apple miniDIsplayport to DVI.

Toneport UX2 not working with new MacBook Pro 10.6.2 Snow Leopard

I do some casual recording using a Line 6 Toneport UX2. Previously i was recording on an older Mac Mini. Recently i upgraded to a new Macbook Pro (Snow Leopard 10.6.2)
The new Macbook is not responding at all when i plug in my toneport, all the software for the toneport is installed.
I think the problem is that my toneport is not compatible with an intel Mac. Is this right?
And if it is can i fix this problem with some kind of upgrade for my toneport software(gearbox)?
And if there is no solution can someone recomend a new audio interface for me to get? Under $200.

I use a Toneport UX2 with my intel iMac. I never had the problem you are describing while using Gearbox with GB. However your problem sounds very similar to one I have experienced when I loaded up Line 6 Pod Farm. I discovered that when I start Pod Farm and get the message you mentioned, if I quit Pod Farm then immediately start it again, everything communicates just fine and I'm back in business. I would like to see a fix for this glitch, but for now I just start twice and then get to work.
Give it a try! I am curious to know if you are in the same boat as me.
As a side note, Recently Line 6 offered Pod Farm for no charge to registered owners of a Line 6 interface such as ours. You may want to check it out. It gives you some more options to play with.

Motion not working with new MacBook Pro

I've installed the Production Bundle on a new MacBook Pro 2.5 GHz Intel Core 2 Duo. Everything works fine, FCP, DVDSP, Compressor but Motion crashes every time with an error message:
"The problem may have been caused by the Ozone plug-in"
Reinstalled software and still have same error msg.
Any one have similar issue with Motion? Any ideas on how to fix?
Thanks in advance.
_john

It's easier for me to just point you here:
http://www.applemotion.net/Troubleshooting/Troubleshooting.html
but it's on my site where I also promote my books and training products so I have to provide this disclaimer:
"I may receive some form of compensation, financial or otherwise, from my recommendation or link"
I consolidated all the info I could gather from these forums on this issue because it arises so frequently.

17" Cinema Display doesn't work with new MacBook Pro

I have used a 17" Cinema Display with a MacBook Pro without problems for the last year. I just bought a new MacBook Pro and a Mini DisplayPort to DVI Adapter. Hooked it up and no display. Reconnected to my olf MBP without the Mini DisplayPort to DVI Adapter and it still works great. Any thoughts?

I have the same machine and the same drive (for about 6 months) they work fine.
The first suspect is the internal SATA cable, replace it.

ITunes match isn't working with new Macbook Pro

Hello everyone,
I have had iTunes Match for years with no problems on any device mobile or otherwise. I just purchased a new Macbook Pro w/Retina. I unboxed, powered up, and updated all software. I set up the Macbook with my one and only apple ID and logged into iTunes with the same ID. All of my purchased music is available, however when I go to turn on iTunes match I get this error: "THIS COMPUTER IS ALREADY ASSOCIATED WITH AN APPLE ID. You can use iTunes Match on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 90 days.". After this I have no other option but to close the window. I have tried logging in and out and restarting the computer but have had no success. Any help would be appreciated.
Thanks

Hi
i ii suugest you contact Apple support Contact Apple for support and service - Apple Support
JIm

I need to find a powered usb hub that works with my Macbook pro

I've got a macbook pro mid 2010. And 2 usb ports isn't enough. Even with the powered hubs taht I have tried none will seem to charge my ipad 2. It only works if it is plugged directly in to the Macbook. So is there a powered usb hub out there that can handle having an ipod and and ipad plugged into them and actually charge these devices. Thanks in advance.

Yes. Google...

Apple 23" HD Cinema Display no longer working with new Macbook Pro

I bought a 23" used HD Cinema display the other day along with the ADC-DVI and DVI-Mini Display adapters. I had it hooked up and it was working perfectly for 3 days. Today my wife tried to connect her Macbook accidentally via the USB that is part of the ADC-DVI adapter which didn't work (why is that USB there anyway?). Then when she went to connect the external display back to my Macbook Pro it did not wake up after being connected. I have tried resetting the PRAM on the MBP and have disconnected and re-connected all connections but nothing will get the display working with the MBP anymore. When I connect and disconnect the mini-display plug into the MBP the MBP flashes the blue screen as it appears to be reacting, but that's it. I can't detect any display when I go into the display system preferences. Does anyone know how I can get the Apple Cinema display working again? Thanks for any help.

Ryan Nagy wrote:
Upon reflection, I think my issue is different. Probably should not have posted it here. As it turns out sometimes my display works, sometimes it does not. I think the power adapter has gone bad. A common occurrence here in Mexico where the power can fluctuate quite a bit. - Ryan
There are couple of long threads in the display section about problems with the power supplies on the 23" HD DVI. See this one for instance: https://discussions.apple.com/message/17981683#17981683
Mine one day just wouldn't turn on -- connected to an old G4 MDD and the Mini -- a bit of fiddling it would occasionally start up, sometimes not. Similar to what you described, the Macs would see it in System Profiler, but it just wouldn't turn on.
Based on that thread, I figured the problem was mostly likely the power supply. A local authorized repair place didn't have a spare for me to try, but the tech sniffed it and mentioned it the burnt electronics smell. LOL, I sniffed it and sniffed the power supply for my 20" DVI Cinema display -- indeed a weird smell.
Based on that thread, I decided to bite the bullet and buy a beefier 150" power supply for the 30" Cinema display, which Apple says in compatible with the 23". See: http://support.apple.com/kb/HT2803
I hooked it up, crossed my fingers, and it fired up right away. It's been working fine for about 3 months now. Cheaper than buying a new monitor.

How do I get usb superdrive to work with new macbook pro. superdrive rejects cd ?

Similar Messages

Maybe you are looking for