How do i have landscape and portrait slides in the same keynote file?

how do i create landscape and portrait slides in the same keynote file?

You cant, its one or the other not both, the slide size setting is for the whole presentation, not for individual slides.
The slide format is chosen to match the display the presentation is shown on. I have presentations showing on vertical, horizontal, square, circular and iregular shaped screens with rear projection, but a single format must still be set.

Similar Messages

  • Is it possible to have source and target schema in the same DB instance ?

    Hi All,
    I'm using Oracle 11gR1.
    I have switched source locations from other server to the one with OWB.
    During deploy I get VLD-3064 and I can't deploy mapping because of many 'table or view does not exist' warnings.
    Is it possible to have source and target schemas in the same instance ??
    How to do it ?
    Regards,
    Martin

    Hi Jörg,
    Thanks for your help and quick answer.
    I'd like to clarify a little your answer :
    1. Are the any special privilages I need to set ? Currently I have only 'RESOURCE' and 'CONNECT' (I think I didn't have to add any other privs when that schema was located on other instance...)
    2. Also VLD-3064 states that : 'Owning and referenced location of this connector are on the same database instance. Unless explicitly referenced in configuration settings no generated code will use the dataabase link resulting from deployment of this connector'. Does it mean I have to put something in configuration ?
    Thanks,
    Martin

  • I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

    I have written a binary file with a specific header format in LABVIEW 8.6 and tried  to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

    I can think of two possible stumbling blocks:
    What are your 8.6 options for "byte order" and "prepend array or string size"?
    Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
    LabVIEW Champion . Do more with less code and in less time .

  • How to export an album and keep images in the same order in elements 11 mac

    I made an album of my trip to Australia (lots of pictures) and changed the order of the images (not the same as shooting order) and when I export the images in the album to a folder or memorystick, the images are copied to that place but I lost the album order of the images.
    How can I prevent that, without having to renumber al 500 images separatly?
    Gr Jos

    Thanks for the tip, Michel
    It worked like a charm…
    cheers Jos
    Op 28 okt. 2013, om 18:49 heeft MichelBParis <[email protected]> het volgende geschreven:
    Re: How to export an album and keep images in the same order in elements 11 mac
    created by MichelBParis in Photoshop Elements - View the full discussion
    JosU a écrit:
    I made an album of my trip to Australia (lots of pictures) and changed the order of the images (not the same as shooting order) and when I export the images in the album to a folder or memorystick, the images are copied to that place but I lost the album order of the images.
    How can I prevent that, without having to renumber al 500 images separatly?
    Gr Jos
    The order in album is only kept in the organizer database, so the only way not to lose that order is to rename files.
    If you are using the 'export' function, select your album in custom order, select all photos and in the dialog, choose to rename with a common base name.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5794538#5794538
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5794538#5794538
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5794538#5794538. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • My macbook pro is frozen, the mouse moves, but it will not click.  I have restarted and it is still the same... Can anyone help me ?

    my macbook pro is frozen, the mouse moves, but it will not click.  I have restarted and it is still the same... Can anyone help me ?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • How to have amounts and amounts splitted at the same time

    Hi everybody, I need to show data as in the example (4 fields):
    Product Category           Number of tickets by category               Product               Number of tickets by product
    Category 1                              100                            product A                             50
                                                                           product B                              50
    Category 2                               10                             product C                              8
                                                                           product D                               2As you can see I need to see the total of tickets for each product category, and then splitted by product.
    In order to try to have this result, I take the following fields from the business area:
    Product Category
    count(tickets_id)
    Product
    but I'm not able to have the amount of tickets by category and the amount of tickets by product at the same time inside the report.....because as soon as I split by product I loose the total of tickets by Category.....
    How can I have this two amounts together ? The first referred to the total of tickets by Category and the second splitted by product at the same time?
    I tried to do a calculation count(count(tickets_id))....but it's not possible...I have the error "Nested Aggregated functions are not allowed"..
    Any help will be appreciated
    Thanks in advance
    Alex

    Tamir, thank you so much !!!
    It work perfectly ! but...just the last question...How can I group these records ?
    I explain to you better. Now, the situation, after using the analytic functions (as you mentioned) is the following:
       Product_Category      Count                  Product             Count      
         Category 1          100                   Product A              40
         Category 1          100                   Product A              40
         Category 1          100                   Product A              40
         Category 1          100                   Product B              60
         Category 2          10                    Product C              8
         Category 2          10                    Product D              2
         Category 2          10                    Product D              2 If I use the SORT (order by), I have empty records (blank) as below:
       Product_Category      Count                  Product             Count      
         Category 1          100                   Product A              40
         blank               blank                 blank                  blank
         blank               blank                 blank                  blank
         Category 1          100                   Product B              60
         Category 2          10                    Product C              8
         Category 2          10                    Product D              2
         blank               blank                 blank                  blank ...but I like to have the data grouped as:
       Product_Category      Count                  Product             Count      
         Category 1          100                   Product A              40
                                                   Product B              60
         Category 2          10                    Product C              8
         Category 2          10                    Product D              2 So, my question is this: how can I group the data using Discoverer ?
    Thanks again
    Alex

  • How do I make Organizer and Editor open at the same time?

    I'm new to PSE 10 and want to know how to make Organizer and Editor open at the same time. I can get the Organizer up, but have to pick out a photo and click on Fix: Full Photo Edit to get Editor to open. Is that the only way to do it?
    Thanks,
    K

    Create Desktop shortcuts for the Organizer and the Editor:
    The Editor's executable is:
    "C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
    The Organizer's executable is:
    "C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
    Ken

  • How do I get videos and pictures taken in the same event to show in a slideshow in the order they were taken?

    How do I get videos and pictures taken in Photos and the same Event to show in the order they were taken? Pictures and videos are seperated with videos at the end of both Photos and the Event.

    You're welcome.
    What's likely happened is that when you transferred the video to the new machine they lost their dates.
    Photos use the Exif metadata to record the date and time of the shot. This is quite different from the date and time of the file, which can change as the file is copied from place to place. Video doesn't have Exif, and so iPhoto uses the file date, and that's changed.
    Simply, there's no absoultely reliable way to date video.
    Try assign dates with the Batch Change command under the Photos menu.

  • How to align output formatted and output text in the same line?

    Hi All,
    I want an output formatted label and a text on the same line,. I've surrounded these components wth a panel form layout and they automatically align one below the other. how do I kepe them in the same line?
    Thanks.

    Try as per the code snippet below:
    <af:document title="TestPage.jspx" id="d1">
    <af:messages id="m1" inline="true"/>
    <af:form id="f1">
    *<af:panelGroupLayout id="pgl1" layout="horizontal">*
    *<af:outputFormatted value="outputFormatted1" id="of1"/>*
    *<h:outputText value="outputText1" id="ot1"/>*
    *</af:panelGroupLayout>*
    </af:form>
    </af:document>
    Thanks,
    Navaneeth

  • How to use Forms 5 and DevSuite 10g in the same machine

    Hello everybody,
    I have installed forms 5 and IDS 10g in one machine and both the versions of the forms were working simultaneously. Now I have un-installed both the versions of the forms and re-installed in the same machine. Installation was successful. but I am not able to connect to the database in forms 5. It shows TNS could not resolve service name. TNS is created in both the versions with same name as well as different name. The IDS is working fine. Please help.
    Thanks and regards
    Sukanta sarkar

    Sukanto,
    What error are you getting? One potential problem you will have with more than one version of Oracle Dev Suite installed is keeping the TNSNAMES.ORA synchronized. I've found the easiest solution to this problem is to add the TNS_ADMIN registry key to each Oracle Home so I can share a single copy of the TNSNAMES.ORA file. You can add this entry by starting the Window Registry editor (regedt32.exe or regedit.exe) and navigate to the following registry hive:
    HKEY_LOCAL_MACHINE => SOFTWARE => ORACLE => HOME? (where ? represents the number of the Oracle Home, eg., 0-9).
    In your example, Forms 5 should be in HOME0 and IDS 10g should be in HOME1. Open each home and add a new "String Value" and name it: TNS_ADMIN. After you have added the new String Value entry, edit the String Value and enter the path to the copy of your TNSNAMES.ORA that is working. Then do the same thing with HOME1 and exit the Registry. You should be able to connect to your database with Forms 5 and IDS 10g. Normally, changes to the registry do not require you to reboot your computer, but I have seen where this is necessary - though not very often.
    Note: Always ensure you have a BACKUP of the Windows Registry before you make any changes. If you uncomfortable modifying the Windows Regisitry, then I don't recommend you make this change.
    Hope this helps.
    Craig...

  • To see if you can have XP and Windows 7 on the same computer?

    I am new to Forums so I don't know if I am in the right place to ask this question. Can you have the older XP and have Windows 7 programmed on to the same computer? This concerns using an older printer that requires XP.

    Hello Joseph Hill.
    This question should be asked in the
    Windows Answers Forum.
    Anyway, two Windows versions can coexist if you choose one of the following options
    create a dual boot configuration: create 2 partitions on the hard disk, install Windows XP in the first one and Windows 7 in the second one; the Windows 7 boot loader will detect the Windows XP installation and configure the boot loader to display a menu
    that will allow you to choose the Windows version you want to start. You can then install and configure your printer in Windows XP, but it won't be available for you to use it in Windows 7;
    install only Windows 7 and create a virtual machine: you'll install Windows XP in the virtual machine and then install and configure your printer in Windows XP.
    Bye.
    Luigi Bruno
    MCP, MCTS, MOS, MTA

  • HT4865 How can I have multiple icloud email accounts using the same rescue email account.

    I have several Iphones for my business for managers to use.
    I would like to set them up to send me the recovery emails but it seems only one icloud address can do that.
    Is it possible to have multiple icloud email accounts using the same - seperate recovery email address?

    Unfortunately, you cannot change your primary @me.com or @icloud.com email address, you could however create an alias or create a completely new account.

  • Myself and my partner both have ipods and want to use the same computer for them is that possible if so how please

    we are trying to use 2 different ipods on the same computer but it says we have to delete the music and  re format cos the music doesnt belong that ipod evertime we connect another ipod

    Yes. See:
    How to use multiple iPods, iPads, or iPhones with one computer
    What is the best way to manage multiple...: Apple Support Communities

  • It is necessary for me to have more than one window open in Firefox, and the command (New Window) no longer works. How do I have two different websites open at the same time on separate displays?

    I used to be able to open two Firefox windows at a time, with one website on one display and another website on another display. Now when I select New Window, nothing happens.

    You can tear off a tab (right-click: Move to New Window) to open it in another window and resize both windows so you see them at the same time.
    *Fox Splitter: https://addons.mozilla.org/firefox/addon/fox-splitter/
    *Split Pannel: https://addons.mozilla.org/firefox/addon/split-pannel

  • How do you use RGB And CMKY colours in the same document for print?

    I want to create a piece of work with a navy blue back ground and a font on top but don't want to change the colour just the RGB to CMKY mode so the colour looks slightly brighter sitting on top. I have seen this printed out in black and looks amazing but don't know how to create it. Could someone please help?

    Sophie,
    Your File>Document Color Mode (along with the Edit>Color Settings) determines how the colours are interpreted, more specifically fitting it into the colour gaumt in question. CMYK Color (Mode) had a narrower gamut of less bright colours, RGB has a wider gamut of more vivid colours.
    Your Window>Color palette expresses the colours in terms of your chosen combinations of CMYK or RGB (or a few others) values, which are then interpreted by the colour mode.
    This means that you can have four combinations: you may insert CMYK values in both CMYK and RGB mode, and you can insert RGB colours in both CMYK and RGB mode.
    You will find that most CMYK/RGB values will change once saved, owing to the fundamental differences between the two colour modes.

Maybe you are looking for