How do I identify OK Code in table control in BDC (scroll up/down)?
Hi. I have read a lot of very good posts and articles here in the forums about how to work with table controls when writing a BDC program. Unfortunately I haven't found any that address the specific issue that I'm having.
I'm writing a program to update the line items of a Parked Document using transaction FBV2. I want to be able to insert a row at the end of the previously existing rows regardless of how many there are and I can't seem to figure out the correct OK Codes to scroll up or down, or page up or down within the table control so I can guarantee that I will get to the next available row.
For example. I have a Parked Document with 13 line items. I would like to insert the new line item as row 14. I know that 10 rows will be displayed at run time on this screen according to my settings in the BDC call and want to scroll down 1 time and then enter the new data on the 4th line on the new set of rows.
Does anyone have any experience with this, or can someone point me in the right direction where I might find this information?
Thanks in advance,
Andy
Hi
In my system I can't run that trx, anyway there's any ok-code for the scrolling, you can have only the okcode for the page up/down buttons.
So you should try to understand how many rows a page can have, so if a page have 10 rows per page and you need to change the row 22, it means you have to simulate to press the page down twice and change the second row of third page.
If you run your BDC by CALL TRANSACTION u should use the option OPTIONS FROM opt, here you indicate to use the standard size of the dynpro. In this way the size of table control is not screen resolution dependent.
TABLES CTU_PARAMS.
CTU_PARAMS-DEFSIZE = 'X'.
CALL TRANSACTION 'FBV1' USING ITAB
OPTIONS FROM CTU_PARAMS.
Max
Similar Messages
-
Wanted a code for table controls in bdc
hi,
i have written code for uploading data into FB60 transaction but i have a serious problem with that code.
after entering 10 line items and when i am entering 11th item it is saying that the screen doesnot contain 11th line.
so please modify my program or if you can please send me a program for handling table controls more line details.
thanks and i will surely provide ten points to it.
my code is
LOOP AT I_PREPARE INTO WA_PREPARE.
V_VALUE = WA_PREPARE-LINE+0(2).
CASE V_VALUE.
WHEN 'A'.
CLEAR:V_DCNT.
*UPLOAD THE COMPANY CODE TO FB60.
*PERFORM.......USING WA_PREPARE-LINE+2(4).
*? filling header data
*********to initialize the company code and to get the popup**********
PERFORM SET_BUKRS.
PERFORM BDC_DYNPRO USING 'SAPLACHD' '1000'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'BKPF-BUKRS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
BUKRS = WA_PREPARE-LINE+2(4).
PERFORM BDC_FIELD USING 'BKPF-BUKRS'
BUKRS.
PERFORM BDC_DYNPRO USING 'SAPMF05A' '1100'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RF05A-BUSCS'
'R'.
*UPLOAD THE VENDOR NUMBER TO FB60
*PERFORM.......USING WA_PREPARE-LINE+45(10).
ACCNT = WA_PREPARE-LINE+45(10).
PERFORM BDC_FIELD USING 'INVFO-ACCNT'
ACCNT.
*UPLOAD THE DATE TO FB60
WRITE WA_PREPARE-LINE+34(8) TO V_DATE USING EDIT MASK ' . . .'
*PERFORM.......USING V_DATE.
PERFORM BDC_FIELD USING 'INVFO-BLDAT'
'15.09.2004'.
PERFORM BDC_FIELD USING 'INVFO-BUDAT'
'15.09.2004'.
*UPLOAD THE AMOUNT TO FB60
*PERFORM.......USING WA_PREPARE-LINE+85(15).
WRBTR = WA_PREPARE-LINE+85(15).
PERFORM BDC_FIELD USING 'INVFO-WRBTR'
WRBTR.
*UPLOAD THE CURRENCY CODE TO FB60
*PERFORM.......USING WA_PREPARE-LINE+100(3).
WAERS = WA_PREPARE-LINE+100(3).
PERFORM BDC_FIELD USING 'INVFO-WAERS'
WAERS.
WHEN 'D'.
V_DCNT = V_DCNT + 1.
IF V_DCNT GT 04.
V_DCNT = 04.
ENDIF.
*UPLOAD THE G/L ACC. TO FB60.
*PERFORM.......USING WA_PREPARE-LINE+51(20).
*? filling item data
CONCATENATE 'ACGL_ITEM-WRBTR(' V_DCNT ')' INTO FNAM.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
FNAM.
CONCATENATE 'ACGL_ITEM-HKONT(' V_DCNT ')' INTO FNAM.
HKONT = WA_PREPARE-LINE+51(20).
PERFORM BDC_FIELD USING FNAM
HKONT.
*UPLOAD THE AMOUNT TO FB60(ACGL_ITEM-WRBTR)
*PERFORM........USING WA_PREPARE-LINE+121(15).
CONCATENATE 'ACGL_ITEM-WRBTR(' V_DCNT ')' INTO FNAM.
WRBTR = WA_PREPARE-LINE+75(15).
PERFORM BDC_FIELD USING FNAM
WRBTR.
PERFORM BDC_DYNPRO USING 'SAPMF05A' '1100'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=0006'.
PERFORM BDC_FIELD USING 'RF05A-BUSCS'
'R'.
ENDCASE.hi,
check this example:
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
REPORT ZSR_BDC_TBCTRL
NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES : RF02K,LFA1,LFBK.
DATA : BEGIN OF IT_VEN OCCURS 0,
LIFNR LIKE RF02K-LIFNR,
KTOKK LIKE RF02K-KTOKK,
NAME1 LIKE LFA1-NAME1,
SORTL LIKE LFA1-SORTL,
LAND1 LIKE LFA1-LAND1,
SPRAS LIKE LFA1-SPRAS,
BANKS(6) TYPE C,
BANKL(17) TYPE C,
BANKN(19) TYPE C,
END OF IT_VEN.
DATA : BEGIN OF BANKS OCCURS 0,
BANKS LIKE LFBK-BANKS,
END OF BANKS,
BEGIN OF BANKL OCCURS 0,
BANKL LIKE LFBK-BANKL,
END OF BANKL,
BEGIN OF BANKN OCCURS 0,
BANKN LIKE LFBK-BANKN,
END OF BANKN.
DATA : FLD(20) TYPE C,
CNT(2) TYPE N.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
INCLUDE BDCRECX1.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'Z:\sr.TXT'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = IT_VEN
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM OPEN_GROUP.
LOOP AT IT_VEN.
REFRESH BDCDATA.
REFRESH : BANKS,BANKL,BANKN..
SPLIT IT_VEN-BANKS AT ',' INTO TABLE BANKS.
SPLIT IT_VEN-BANKL AT ',' INTO TABLE BANKL.
SPLIT IT_VEN-BANKN AT ',' INTO TABLE BANKN.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RF02K-LIFNR'
IT_VEN-LIFNR.
PERFORM BDC_FIELD USING 'RF02K-KTOKK'
IT_VEN-KTOKK.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'LFA1-NAME1'
IT_VEN-NAME1.
PERFORM BDC_FIELD USING 'LFA1-SORTL'
IT_VEN-SORTL.
PERFORM BDC_FIELD USING 'LFA1-LAND1'
IT_VEN-LAND1.
PERFORM BDC_FIELD USING 'LFA1-SPRAS'
IT_VEN-SPRAS.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
*perform bdc_field using 'LFBK-BANKS(01)'
'DE'.
*perform bdc_field using 'LFBK-BANKS(02)'
'DE'.
*perform bdc_field using 'LFBK-BANKL(01)'
'10020030'.
*perform bdc_field using 'LFBK-BANKL(02)'
'67270003'.
*perform bdc_field using 'LFBK-BANKN(01)'
'12345'.
*perform bdc_field using 'LFBK-BANKN(02)'
'66666'.
MOVE 1 TO CNT.
LOOP AT BANKS.
CONCATENATE 'LFBK-BANKS(' CNT ') ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKS-BANKS.
CNT = CNT + 1.
ENDLOOP.
MOVE 1 TO CNT.
LOOP AT BANKL.
CONCATENATE 'LFBK-BANKL(' CNT ') ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKL-BANKL.
CNT = CNT + 1.
ENDLOOP.
MOVE 1 TO CNT.
LOOP AT BANKN.
CONCATENATE 'LFBK-BANKN(' CNT ') ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKN-BANKN.
CNT = CNT + 1.
ENDLOOP.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=YES'.
PERFORM BDC_TRANSACTION USING 'XK01'.
ENDLOOP.
PERFORM CLOSE_GROUP. -
How to select all the rows of table control in BDC
Hi All,
While I am doing BDC for Transaction Code MC88, After the first screen I will get another screen with tabble control, Here I need to select all the rows of table control, I am assignng the 'X' to the first field of Table Control which is the indicator for selection.
Here I am getting message called Indicator field is not in program and screen.
While doing Recording I am not able to record the indicator, Please any one let me know how to record the Entire table control selection.
Thanks in advance..Sorry about that lakshmi. Here is my code.
PERFORM dynpro USING : 'X' 'SAPMMCP6' '0105',
' ' 'RMCP2-MATNR' t_matnr,
' ' 'RMCP2-WERKS' t_werks,
' ' 'BDC_OKCODE' '=AKTV'.
PERFORM dynpro USING : 'X' 'SAPLMCPA' '0707',
' ' 'BDC_OKCODE' '=MRKE'.
PERFORM dynpro USING : 'X' 'SAPLMCPA' '0707',
' ' 'BDC_OKCODE' '=GRAO -
How to get First line item in Table control for BDC.
Hi,
I have a requirement while creating the return order from the reference Sales order for BOM.
Once I compare the line items and delete the items not to be returned, I want to read the first line item which in fact is header, to make some changes.
How to read this as cursor points to the last line item.
-B S BHi Bsb,
What is exactly unclear to you? =POPO will give a popup screen in which you can enter the order position number. This number will then be on the top of the table which means you can refer to it in BDC with "(01)".
Regards,
John. -
Hai Experts,
i have problem with table control in bdc, can any tell me wat exact code for table control in bdc,n plz give flat file for this prm or any related
HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
DUMMY(100) TYPE C,
END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
LIFNR(10) TYPE C,
BUKRS(4) TYPE C,
EKORG(4) TYPE C,
KTOKK(4) TYPE C,
NAME1(30) TYPE C,
SORTL(10) TYPE C,
LAND1(3) TYPE C,
SPRAS(2) TYPE C,
AKONT(6) TYPE C,
FDGRV(2) TYPE C,
WAERS(3) TYPE C,
END OF IT_XK01,
BEGIN OF IT_BANK OCCURS 0,
BANKS(3) TYPE C,
BANKL(10) TYPE C,
BANKN(10) TYPE C,
KOINH(30) TYPE C,
LIFNR(10) TYPE C,
END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = 'C:\VENDOR.TXT'
FILETYPE = 'ASC'
TABLES
DATA_TAB = IT_DUMMY.
LOOP AT IT_DUMMY.
IF IT_DUMMY-DUMMY+0(2) = '11'.
IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
APPEND IT_XK01.
ELSE.
IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
APPEND IT_BANK.
ENDIF.
ENDLOOP.
LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-REF_LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
IT_XK01-LIFNR.
perform bdc_field using 'RF02K-BUKRS'
IT_XK01-BUKRS.
perform bdc_field using 'RF02K-EKORG'
IT_XK01-EKORG.
perform bdc_field using 'RF02K-KTOKK'
IT_XK01-KTOKK.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-TELX1'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-NAME1'
IT_XK01-NAME1.
perform bdc_field using 'LFA1-SORTL'
IT_XK01-SORTL.
perform bdc_field using 'LFA1-LAND1'
IT_XK01-LAND1.
perform bdc_field using 'LFA1-SPRAS'
IT_XK01-SPRAS.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-KOINH(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
DATA : FNAM(20) TYPE C,
IDX TYPE C.
MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKS.
CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKL.
CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKN.
CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-KOINH.
IDX = IDX + 1.
ENDLOOP.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFB1-AKONT'
IT_XK01-AKONT.
perform bdc_field using 'LFB1-FDGRV'
IT_XK01-FDGRV.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFM1-WAERS'
IT_XK01-WAERS.
perform bdc_dynpro using 'SAPMF02K' '0320'.
perform bdc_field using 'BDC_CURSOR'
'WYT3-PARVW(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
MODE 'A'
UPDATE 'S'
MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORMHi Rajesh,
I will send a sample code 4 ur problem check it once.And also i will attach a FLAT FILE at the end of program check it once.Plz copy the below code and execute it ok...
*& Report YBDC_MB1C_HEADER_ITEM_CALLTRA *
*& DEVELOPER : KIRAN KUMAR.G *
*& PURPOSE : UPLOAD DATA(T.CODE = MB1C) INTO DATABASE(CALL TRANS) *
*& CREATION DT: 5/12/2007 *
*& REQUEST : ERPK900035 *
REPORT YBDC_MB1C_HEADER_ITEM_CALLTRA.
Global BDC And Message Structures
DATA: gt_bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE,
gt_msgtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
Global Variables For File Path And Messages
DATA: gv_infile TYPE string, "For Path Selection
gv_msg TYPE string. "For Message Printing
For Elimination Of Illegal Screens
DATA: opt TYPE ctu_params.
Global Variables
DATA: gv_num(2) TYPE n,
gv_matnr(20),
gv_erfmg(20).
gv_num = 1.
Internal Table
DATA: BEGIN OF gt_data OCCURS 0,
f1(20),
f2(20),
f3(20),
f4(20),
f5(20),
f6(20),
f7(20),
f8(20),
f9(20),
END OF gt_data.
Selection Criteria
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_file LIKE rlgrap-filename,
p_mode.
SELECTION-SCREEN : END OF BLOCK b1.
Selection Path
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM selection_path.
START-OF-SELECTION.
opt-nobinpt = 'X'.
opt-defsize = 'X'.
opt-updmode = 'A'.
Upload the data
PERFORM upload_data.
END-OF-SELECTION.
Populate Data Into BDCDATA Structure
PERFORM populate_data.
*& Form selection_path
text
--> p1 text
<-- p2 text
FORM selection_path .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
FIELD_NAME = ' '
IMPORTING
file_name = p_file.
gv_infile = p_file.
ENDFORM. " selection_path
*& Form upload_data
text
--> p1 text
<-- p2 text
FORM upload_data .
REFRESH : gt_data.
CLEAR : gt_data.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = gv_infile
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = gt_data
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " upload_data
*& Form Populate_data
text
--> p1 text
<-- p2 text
FORM populate_data .
LOOP AT gt_data.
*Header Information
IF gt_data-f1 = 'H'.
PERFORM firstscreen.
CLEAR gt_data.
ENDIF.
*Item Information
IF gt_data-f1 = 'I'.
PERFORM secondscreen.
*Save data and call the Call Transaction Method
AT END OF f1.
PERFORM save.
CALL TRANSACTION 'MB1C' USING gt_bdcdata MODE p_mode
MESSAGES INTO gt_msgtab.
PERFORM messages.
REFRESH gt_bdcdata.
CLEAR gv_num. "USED IN CONCATENATE STEP
ENDAT.
gv_num = gv_num + 1.
ENDIF. "End of Item Data
ENDLOOP.
ENDFORM. " Populate_data
*& Form firstscreen
text
--> p1 text
<-- p2 text
FORM firstscreen .
PERFORM bdc_dynpro USING 'SAPMM07M' '0400'.
PERFORM bdc_field USING 'BDC_CURSOR'
'MKPF-BKTXT'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'MKPF-BLDAT'
gt_data-f2.
PERFORM bdc_field USING 'MKPF-BUDAT'
gt_data-f3.
PERFORM bdc_field USING 'MKPF-BKTXT'
gt_data-f4.
PERFORM bdc_field USING 'RM07M-BWARTWA'
gt_data-f5.
PERFORM bdc_field USING 'RM07M-WERKS'
gt_data-f6.
PERFORM bdc_field USING 'RM07M-LGORT'
gt_data-f7.
PERFORM bdc_field USING 'XFULL'
'X'.
PERFORM bdc_field USING 'RM07M-WVERS2'
'X'.
PERFORM bdc_dynpro USING 'SAPMM07M' '0421'.
PERFORM bdc_field USING 'BDC_CURSOR'
'MSEG-ERFMG(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
ENDFORM. " firstscreen
*& Form secondscreen
text
--> p1 text
<-- p2 text
FORM secondscreen .
CONCATENATE 'MSEG-MATNR(' gv_num ')' INTO gv_matnr.
CONCATENATE 'MSEG-ERFMG(' gv_num ')' INTO gv_erfmg.
PERFORM bdc_field USING 'MSEGK-KUNNR'
gt_data-f2.
PERFORM bdc_field USING gv_matnr
gt_data-f3.
PERFORM bdc_field USING gv_erfmg
gt_data-f4.
PERFORM bdc_field USING 'DKACB-FMORE'
'X'.
ENDFORM. " secondscreen
*& Form save
text
--> p1 text
<-- p2 text
FORM save .
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
ENDFORM. " save
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR gt_bdcdata.
gt_bdcdata-program = program.
gt_bdcdata-dynpro = dynpro.
gt_bdcdata-dynbegin = 'X'.
APPEND gt_bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM bdc_field USING fnam fval.
CLEAR gt_bdcdata.
gt_bdcdata-fnam = fnam.
gt_bdcdata-fval = fval.
APPEND gt_bdcdata.
ENDFORM. "BDC_FIELD
*& Form messages
text
--> p1 text
<-- p2 text
FORM messages .
LOOP AT gt_msgtab.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = sy-msgid
lang = sy-langu
no = sy-msgno
v1 = sy-msgv1
v2 = sy-msgv2
v3 = sy-msgv3
v4 = sy-msgv4
IMPORTING
msg = gv_msg
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-tabix EQ 1.
WRITE:/ 'Process Log' COLOR 3.
ENDIF.
WRITE:/ gv_msg.
ENDLOOP.
REFRESH : gt_msgtab.
CLEAR : gt_msgtab.
ENDFORM. " messages
FLAT FILE
*H 10012005 20022005 HEADER 451 1000 0001
*I 1 100-300 5
*I 1 100-400 3
*I 1 100-100 12
*H 12012005 12022005 HEADER 451 1000 0001
*I 2 100-200 4
General Information(t.code= MB1C)
*DOC DATE : 10.1.2005 POSTING DATE : 20.2.2005
*HEADER TEXT : HEADER
*MATERIAL TYPE :451 PLANT : 1000
*STORAGE LOCATION : 0001
*CUSTOMER :1
*MATERIAL NO : 100-300
*QUANTITY : 5
*BUSINESS AREA : 0001
Award points if helpful
Kiran Kumar.G.A -
'how to code for table control wizard in module pool program
Hi Gurus,
Please provide me a sample code of table control wizard...
Thanks in advance!!!!
Regards,
KranthiHi Kranti,
check this code... it should be helpful
*& Module pool Z_TABLE_CONTROL_WIZARD_DEMO *
PROGRAM z_table_control_wizard_demo .
DATA: BEGIN OF lt_vbak OCCURS 0,
flag TYPE c,
vbeln TYPE vbeln_va,
netwr TYPE netwr,
kunnr TYPE kunnr,
END OF lt_vbak.
DATA: sfkunnr TYPE kunnr.
*&spwizard: declaration of tablecontrol 'TCONTROL' itself
CONTROLS: tcontrol TYPE TABLEVIEW USING SCREEN 9000.
*&spwizard: lines of tablecontrol 'TCONTROL'
DATA: g_tcontrol_lines LIKE sy-loopc.
DATA: ok_code LIKE sy-ucomm.
*&spwizard: output module for tc 'TCONTROL'. do not change this line!
*&spwizard: update lines for equivalent scrollbar
MODULE tcontrol_change_tc_attr OUTPUT.
DESCRIBE TABLE lt_vbak LINES tcontrol-lines.
ENDMODULE. "TCONTROL_change_tc_attr OUTPUT
*&spwizard: output module for tc 'TCONTROL'. do not change this line!
*&spwizard: get lines of tablecontrol
MODULE tcontrol_get_lines OUTPUT.
g_tcontrol_lines = sy-loopc.
ENDMODULE. "TCONTROL_get_lines OUTPUT
*&spwizard: input module for tc 'TCONTROL'. do not change this line!
*&spwizard: modify table
MODULE tcontrol_modify INPUT.
MODIFY lt_vbak
INDEX tcontrol-current_line.
ENDMODULE. "TCONTROL_modify INPUT
*&spwizard: input modul for tc 'TCONTROL'. do not change this line!
*&spwizard: mark table
MODULE tcontrol_mark INPUT.
DATA: g_tcontrol_wa2 LIKE LINE OF lt_vbak.
IF tcontrol-line_sel_mode = 1.
LOOP AT lt_vbak INTO g_tcontrol_wa2
WHERE flag = 'X'.
g_tcontrol_wa2-flag = ''.
MODIFY lt_vbak
FROM g_tcontrol_wa2
TRANSPORTING flag.
ENDLOOP.
ENDIF.
MODIFY lt_vbak
INDEX tcontrol-current_line
TRANSPORTING flag.
ENDMODULE. "TCONTROL_mark INPUT
*&spwizard: input module for tc 'TCONTROL'. do not change this line!
*&spwizard: process user command
MODULE tcontrol_user_command INPUT.
ok_code = sy-ucomm.
PERFORM user_ok_tc USING 'TCONTROL'
'LT_VBAK'
'FLAG'
CHANGING ok_code.
sy-ucomm = ok_code.
ENDMODULE. "TCONTROL_user_command INPUT
* INCLUDE TABLECONTROL_FORMS *
*& Form USER_OK_TC *
FORM user_ok_tc USING p_tc_name TYPE dynfnam
p_table_name
p_mark_name
CHANGING p_ok LIKE sy-ucomm.
*&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------*
DATA: l_ok TYPE sy-ucomm,
l_offset TYPE i.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
*&SPWIZARD: Table control specific operations *
*&SPWIZARD: evaluate TC name and operations *
SEARCH p_ok FOR p_tc_name.
IF sy-subrc <> 0.
EXIT.
ENDIF.
l_offset = STRLEN( p_tc_name ) + 1.
l_ok = p_ok+l_offset.
*&SPWIZARD: execute general and TC specific operations *
CASE l_ok.
WHEN 'INSR'. "insert row
PERFORM fcode_insert_row USING p_tc_name
p_table_name.
CLEAR p_ok.
WHEN 'DELE'. "delete row
PERFORM fcode_delete_row USING p_tc_name
p_table_name
p_mark_name.
CLEAR p_ok.
WHEN 'P--' OR "top of list
'P-' OR "previous page
'P+' OR "next page
'P++'. "bottom of list
PERFORM compute_scrolling_in_tc USING p_tc_name
l_ok.
CLEAR p_ok.
* WHEN 'L--'. "total left
* PERFORM FCODE_TOTAL_LEFT USING P_TC_NAME.
* WHEN 'L-'. "column left
* PERFORM FCODE_COLUMN_LEFT USING P_TC_NAME.
* WHEN 'R+'. "column right
* PERFORM FCODE_COLUMN_RIGHT USING P_TC_NAME.
* WHEN 'R++'. "total right
* PERFORM FCODE_TOTAL_RIGHT USING P_TC_NAME.
WHEN 'MARK'. "mark all filled lines
PERFORM fcode_tc_mark_lines USING p_tc_name
p_table_name
p_mark_name .
CLEAR p_ok.
WHEN 'DMRK'. "demark all filled lines
PERFORM fcode_tc_demark_lines USING p_tc_name
p_table_name
p_mark_name .
CLEAR p_ok.
* WHEN 'SASCEND' OR
* 'SDESCEND'. "sort column
* PERFORM FCODE_SORT_TC USING P_TC_NAME
* l_ok.
ENDCASE.
ENDFORM. " USER_OK_TC
*& Form FCODE_INSERT_ROW *
FORM fcode_insert_row
USING p_tc_name TYPE dynfnam
p_table_name .
*&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------*
DATA l_lines_name LIKE feld-name.
DATA l_selline LIKE sy-stepl.
DATA l_lastline TYPE i.
DATA l_line TYPE i.
DATA l_table_name LIKE feld-name.
FIELD-SYMBOLS <tc> TYPE cxtab_control.
FIELD-SYMBOLS <table> TYPE STANDARD TABLE.
FIELD-SYMBOLS <lines> TYPE i.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
ASSIGN (p_tc_name) TO <tc>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE p_table_name '[]' INTO l_table_name. "table body
ASSIGN (l_table_name) TO <table>. "not headerline
*&SPWIZARD: get looplines of TableControl *
CONCATENATE 'G_' p_tc_name '_LINES' INTO l_lines_name.
ASSIGN (l_lines_name) TO <lines>.
*&SPWIZARD: get current line *
GET CURSOR LINE l_selline.
IF sy-subrc <> 0. " append line to table
l_selline = <tc>-lines + 1.
*&SPWIZARD: set top line *
IF l_selline > <lines>.
<tc>-top_line = l_selline - <lines> + 1 .
ELSE.
<tc>-top_line = 1.
ENDIF.
ELSE. " insert line into table
l_selline = <tc>-top_line + l_selline - 1.
l_lastline = <tc>-top_line + <lines> - 1.
ENDIF.
*&SPWIZARD: set new cursor line *
l_line = l_selline - <tc>-top_line + 1.
*&SPWIZARD: insert initial line *
INSERT INITIAL LINE INTO <table> INDEX l_selline.
<tc>-lines = <tc>-lines + 1.
*&SPWIZARD: set cursor *
SET CURSOR LINE l_line.
ENDFORM. " FCODE_INSERT_ROW
*& Form FCODE_DELETE_ROW *
FORM fcode_delete_row
USING p_tc_name TYPE dynfnam
p_table_name
p_mark_name .
*&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------*
DATA l_table_name LIKE feld-name.
FIELD-SYMBOLS <tc> TYPE cxtab_control.
FIELD-SYMBOLS <table> TYPE STANDARD TABLE.
FIELD-SYMBOLS <wa>.
FIELD-SYMBOLS <mark_field>.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
ASSIGN (p_tc_name) TO <tc>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE p_table_name '[]' INTO l_table_name. "table body
ASSIGN (l_table_name) TO <table>. "not headerline
*&SPWIZARD: delete marked lines *
DESCRIBE TABLE <table> LINES <tc>-lines.
LOOP AT <table> ASSIGNING <wa>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT p_mark_name OF STRUCTURE <wa> TO <mark_field>.
IF <mark_field> = 'X'.
DELETE <table> INDEX syst-tabix.
IF sy-subrc = 0.
<tc>-lines = <tc>-lines - 1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " FCODE_DELETE_ROW
*& Form COMPUTE_SCROLLING_IN_TC
* text
* -->P_TC_NAME name of tablecontrol
* -->P_OK ok code
FORM compute_scrolling_in_tc USING p_tc_name
p_ok.
*&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------*
DATA l_tc_new_top_line TYPE i.
DATA l_tc_name LIKE feld-name.
DATA l_tc_lines_name LIKE feld-name.
DATA l_tc_field_name LIKE feld-name.
FIELD-SYMBOLS <tc> TYPE cxtab_control.
FIELD-SYMBOLS <lines> TYPE i.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
ASSIGN (p_tc_name) TO <tc>.
*&SPWIZARD: get looplines of TableControl *
CONCATENATE 'G_' p_tc_name '_LINES' INTO l_tc_lines_name.
ASSIGN (l_tc_lines_name) TO <lines>.
*&SPWIZARD: is no line filled? *
IF <tc>-lines = 0.
*&SPWIZARD: yes, ... *
l_tc_new_top_line = 1.
ELSE.
*&SPWIZARD: no, ... *
CALL FUNCTION 'SCROLLING_IN_TABLE'
EXPORTING
entry_act = <tc>-top_line
entry_from = 1
entry_to = <tc>-lines
last_page_full = 'X'
loops = <lines>
ok_code = p_ok
overlapping = 'X'
IMPORTING
entry_new = l_tc_new_top_line
EXCEPTIONS
* NO_ENTRY_OR_PAGE_ACT = 01
* NO_ENTRY_TO = 02
* NO_OK_CODE_OR_PAGE_GO = 03
OTHERS = 0.
ENDIF.
*&SPWIZARD: get actual tc and column *
GET CURSOR FIELD l_tc_field_name
AREA l_tc_name.
IF syst-subrc = 0.
IF l_tc_name = p_tc_name.
*&SPWIZARD: et actual column *
SET CURSOR FIELD l_tc_field_name LINE 1.
ENDIF.
ENDIF.
*&SPWIZARD: set the new top line *
<tc>-top_line = l_tc_new_top_line.
ENDFORM. " COMPUTE_SCROLLING_IN_TC
*& Form FCODE_TC_MARK_LINES
* marks all TableControl lines
* -->P_TC_NAME name of tablecontrol
FORM fcode_tc_mark_lines USING p_tc_name
p_table_name
p_mark_name.
*&SPWIZARD: EGIN OF LOCAL DATA-----------------------------------------*
DATA l_table_name LIKE feld-name.
FIELD-SYMBOLS <tc> TYPE cxtab_control.
FIELD-SYMBOLS <table> TYPE STANDARD TABLE.
FIELD-SYMBOLS <wa>.
FIELD-SYMBOLS <mark_field>.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
ASSIGN (p_tc_name) TO <tc>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE p_table_name '[]' INTO l_table_name. "table body
ASSIGN (l_table_name) TO <table>. "not headerline
*&SPWIZARD: mark all filled lines *
LOOP AT <table> ASSIGNING <wa>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT p_mark_name OF STRUCTURE <wa> TO <mark_field>.
<mark_field> = 'X'.
ENDLOOP.
ENDFORM. "fcode_tc_mark_lines
*& Form FCODE_TC_DEMARK_LINES
* demarks all TableControl lines
* -->P_TC_NAME name of tablecontrol
FORM fcode_tc_demark_lines USING p_tc_name
p_table_name
p_mark_name .
*&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------*
DATA l_table_name LIKE feld-name.
FIELD-SYMBOLS <tc> TYPE cxtab_control.
FIELD-SYMBOLS <table> TYPE STANDARD TABLE.
FIELD-SYMBOLS <wa>.
FIELD-SYMBOLS <mark_field>.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
ASSIGN (p_tc_name) TO <tc>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE p_table_name '[]' INTO l_table_name. "table body
ASSIGN (l_table_name) TO <table>. "not headerline
*&SPWIZARD: demark all filled lines *
LOOP AT <table> ASSIGNING <wa>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT p_mark_name OF STRUCTURE <wa> TO <mark_field>.
<mark_field> = space.
ENDLOOP.
ENDFORM. "fcode_tc_mark_lines
*& Module STATUS_9000 OUTPUT
* text
MODULE status_9000 OUTPUT.
SET PF-STATUS 'S9000'.
SET TITLEBAR 'T9000'.
ENDMODULE. " STATUS_9000 OUTPUT
*& Module USER_COMMAND_9000 INPUT
* text
MODULE user_command_9000 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
LEAVE TO SCREEN 0.
WHEN 'DISP'.
SELECT vbeln netwr kunnr INTO CORRESPONDING FIELDS OF TABLE lt_vbak
FROM vbak
WHERE kunnr = sfkunnr.
* LEAVE TO LIST-PROCESSING [AND RETURN TO SCREEN <nnnn>].
* By default, the dialog processor returns to the PBO processing of
* the screen from which the list processor was called. The optional
* addition AND RETURN TO SCREEN allows you to specify a different
* screen in the current screen sequence at whose PBO event you want
* to resume processing.
when 'LIST'.
LEAVE TO LIST-PROCESSING.
WRITE:/ 'Time :', SY-UZEIT.
LOOP AT LT_VBAK.
WRITE:/ LT_VBAK-VBELN,
LT_VBAK-NETWR,
LT_VBAK-KUNNR.
ENDLOOP.
WHEN 'SUBM'.
*& You can call executable programs from other ABAP programs using the
*& following statement:
*& SUBMIT <rep>|(<field>) [AND RETURN] [<options>].
SUBMIT z_submit_report VIA SELECTION-SCREEN AND RETURN.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPUT
TABLE CONTROL WIZARD SE51 CODE
PROCESS BEFORE OUTPUT.
*&spwizard: pbo flow logic for tablecontrol 'TCONTROL'
module TCONTROL_change_tc_attr.
*&spwizard: module TCONTROL_change_col_attr.
loop at LT_VBAK
with control TCONTROL
cursor TCONTROL-current_line.
module TCONTROL_get_lines.
*&spwizard: module TCONTROL_change_field_attr
endloop.
MODULE STATUS_9000.
PROCESS AFTER INPUT.
*&spwizard: pai flow logic for tablecontrol 'TCONTROL'
loop at LT_VBAK.
chain.
field LT_VBAK-VBELN.
field LT_VBAK-NETWR.
field LT_VBAK-KUNNR.
module TCONTROL_modify on chain-request.
endchain.
field LT_VBAK-FLAG
module TCONTROL_mark on request.
endloop.
module TCONTROL_user_command.
*&spwizard: module TCONTROL_change_tc_attr.
*&spwizard: module TCONTROL_change_col_attr.
MODULE USER_COMMAND_9000.
regards
padma -
How to validate the dates in the table control ?
How to validate the dates in the table control ?
Can I write like this ?
LOOP AT it_tab .
CHAIN.
FIELD : it_tab-strtdat,it_tab-enddat.
module date_validation.
ENDCHAIN.
ENDLOOP.
Module Date_validation.
ranges : vdat type sy-datum.
vdat-sign = 'I'.
VDAT-LOW = it_tab-STRTDAT.
VDAT-HIGH = it_tab-ENDDAT.
VDAT-OPTION = 'BT'.
APPEND VDAT.
WHAT CODE I have to write here to validate ?
and If I write like this How can we know which is the current row being add ?
It loops total internal table ..?
Bye,
Muttu.Hi,
I think there is no need to put chain endchain.
To do validation you have to write module in PAI which does required validations.
Thanks
DARSHAN PATEL -
How can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.
how can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.?
please explain the important questions.How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to <material>,
name2 to <quan>,
name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using <material> DataTable-matnr.
perform bdcfield using <quan> DataTable-menge.
perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
An example abap program of handling Table Control during bdc programming.
REPORT zmm_bdcp_purchaseorderkb02
NO STANDARD PAGE HEADING LINE-SIZE 255.
Declaring internal tables *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
dummy(255) TYPE c,
END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
ematn(18), "Material Number.
menge(13), "Qyantity.
netpr(11), "Net Price.
werks(4), "Plant.
ebelp(5), "Item Number.
END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
lifnr(10), "Vendor A/c No.
bsart(4), "A/c Type.
bedat(8), "Date of creation of PO.
ekorg(4), "Purchasing Organisation.
ekgrp(3), "Purchasing Group.
x_data LIKE TABLE OF it_idata,
END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
Search help for file *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
START-OF-SELECTION.
To upload the data into line structure *
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = it_dummy.
Processing the data from line structure to internal tables *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
IF it_dummy-dummy+0(01) = 'H'.
v_indx = v_indx + 1.
CLEAR it_idata.
REFRESH it_idata.
CLEAR it_me21-x_data.
REFRESH it_me21-x_data.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
it_me21-bsart
it_me21-bedat
it_me21-ekorg
it_me21-ekgrp.
APPEND it_me21.
ELSEIF it_dummy-dummy+0(01) = 'L'.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_idata-ematn
it_idata-menge
it_idata-netpr
it_idata-werks
it_idata-ebelp.
APPEND it_idata TO it_me21-x_data.
MODIFY it_me21 INDEX v_indx.
ENDIF.
ENDLOOP.
To open the group *
PERFORM open_group.
To populate the bdcdata table for header data *
LOOP AT it_me21.
v_count = v_count + 1.
REFRESH it_bdcdata.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0100',
' ' 'BDC_CURSOR' 'EKKO-LIFNR',
' ' 'BDC_OKCODE' '/00',
' ' 'EKKO-LIFNR' it_me21-lifnr,
' ' 'RM06E-BSART' it_me21-bsart,
' ' 'RM06E-BEDAT' it_me21-bedat,
' ' 'EKKO-EKORG' it_me21-ekorg,
' ' 'EKKO-EKGRP' it_me21-ekgrp,
' ' 'RM06E-LPEIN' 'T'.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
LOOP AT it_me21-x_data INTO x_idata.
CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
v_indx = v_indx + 1.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
ENDLOOP.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '=BU'.
PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
End of selection event *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
WRITE :/10 text-001. "Sucess records
WRITE :/10 SY-ULINE(20).
SKIP.
IF it_sucess IS INITIAL.
WRITE :/ text-002.
ELSE.
WRITE :/ text-008, "Total number of Succesful records
35 v_ns.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_sucess.
WRITE:/4 it_sucess-lifnr,
17 it_sucess-tabix CENTERED,
30 it_sucess-sucess_rec.
ENDLOOP.
SKIP.
*-----To display the erroneous records
WRITE:/10 text-006. "Error Records
WRITE:/10 SY-ULINE(17).
SKIP.
IF it_error IS INITIAL.
WRITE:/ text-007. "No error records
ELSE.
WRITE:/ text-009, "Total number of erroneous records
35 v_ne.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_error.
WRITE:/4 it_error-lifnr,
17 it_error-tabix CENTERED,
30 it_error-error_rec.
ENDLOOP.
REFRESH it_sucess.
REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include ZMM_INCL_PURCHASEORDERKB01
DATA: it_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA: it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA: E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
sucess_rec(125),
END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
error_rec(125),
END OF it_error.
Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu. "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12). "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12). "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
GROUP = SPACE. "OR USER = SPACE.
MESSAGE E613(MS).
ENDIF.
create batchinput session *
FORM OPEN_GROUP.
IF SESSION = 'X'.
SKIP.
WRITE: /(20) 'Create group'(I01), GROUP.
SKIP.
*----open batchinput group
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = GROUP
USER = sy-uname.
WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
(12) 'returncode:'(I05),
SY-SUBRC.
ENDIF.
ENDFORM. "OPEN_GROUP
end batchinput session *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
(12) 'returncode:'(I05),
SY-SUBRC.
ELSE.
IF E_GROUP_OPENED = 'X'.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /.
WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
ENDIF.
ENDIF.
ENDFORM. "CLOSE_GROUP
Start new transaction according to parameters *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
WRITE: / 'BDC_INSERT'(I03),
TCODE,
'returncode:'(I05),
SY-SUBRC,
'RECORD:',
SY-INDEX.
ELSE.
REFRESH it_MESSTAB.
CALL TRANSACTION TCODE USING it_BDCDATA
MODE CTUMODE
UPDATE CUPDATE
MESSAGES INTO it_MESSTAB.
L_SUBRC = SY-SUBRC.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
ENDIF.
Message handling for Call Transaction *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
IF E_GROUP_OPENED = ' '.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = E_GROUP
USER = sy-uname
KEEP = E_KEEP.
E_GROUP_OPENED = 'X'.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM. "BDC_TRANSACTION
Form subr_bdc_table *
text
-->P_0220 text *
-->P_0221 text *
-->P_0222 text *
FORM subr_bdc_table USING VALUE(P_0220) TYPE ANY
VALUE(P_0221) TYPE ANY
VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
CLEAR it_bdcdata.
it_bdcdata-fnam = P_0221.
it_bdcdata-fval = P_0222.
APPEND it_bdcdata.
ELSE.
it_bdcdata-dynbegin = P_0220.
it_bdcdata-program = P_0221.
it_bdcdata-dynpro = P_0222.
APPEND it_bdcdata.
ENDIF.
ENDFORM. " subr_bdc_table
Form subr_mess_hand *
text *
-->P_G_MESS text *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = it_messtab-msgid
LANG = it_messtab-msgspra
NO = it_messtab-msgnr
v1 = it_messtab-msgv1
v2 = it_messtab-msgv2
IMPORTING
MSG = P_G_MESS
EXCEPTIONS
OTHERS = 0.
CASE it_messtab-msgtyp.
when 'E'.
it_error-error_rec = P_G_MESS.
it_error-lifnr = it_me21-lifnr.
it_error-tabix = v_count.
APPEND IT_ERROR.
when 'S'.
it_sucess-sucess_rec = P_G_MESS.
it_sucess-lifnr = it_me21-lifnr.
it_sucess-tabix = v_count.
APPEND IT_SUCESS.
endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM. " subr_mess_hand
Also refer
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bdc-table-control-668404
and
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
srinivas
<b>*reward for useful answers*</b> -
How to use table control in bdc, plz somebody tell me.
Hi Gurus,
Ples tell me
how to use table control in bdc, plz somebody tell me.
And send Sample CODE also. Thnaks in advance.hi,
Table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen?
Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
we can determine the number of visible lines on Transaction Screen from our Calling BDC program.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference
in Static ASSIGN and Dynamic ASSIGN.
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop.
Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6
using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: , , .
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to ,
name2 to ,
name3 to .
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using DataTable-matnr.
perform bdcfield using DataTable-menge.
perform bdcfield using DataTable-indicator.
endloop.
enddo.
example 1
BDC table control is an area on the screen in which you can display data in tabular form. You process it using a loop. Table controls are comparable to step loop tables. While a table control consists of a single definition row, step loop blocks may extend over more than one row. Table controls are more flexible than step loops, and are intended to replace them
When you need to handle a scenario like in sales order,it may contain more than one material,if you have more than one material We have to use table control,it will have number of columns and number of rows.
Table controls allow you to enter, display, and modify tabular data easily on the screen
Check this code,
PARAMETERS: file1 LIKE rlgrap-filename.
*Internal Table Declarations
DATA: BEGIN OF itab OCCURS 0,
matnr(18) TYPE c, "MaterialNumber
werks(4) TYPE c, "Plant
vdatu(10) TYPE c, "Valid From Date
bdatu(10) TYPE c, "Valid To Date
lifnr(10) TYPE c, "Vendor Number
ekorg(4) TYPE c, "Purchasing Organization
feskz TYPE c, "Fixed
autet TYPE c, "MRP Indicator
END OF itab.
DATA: bdcdata LIKE TABLE OF bdcdata WITH HEADER LINE.
*VARIABLES Declarations
DATA: wa1 LIKE LINE OF itab. "Workarea for ITAB
DATA: n TYPE i, "Check
count TYPE i.
DATA: cnt(2), "Counter
wa(15). "Workarea to hold concatenatedvalue
DATA v_msg(100).
DATA: flag.
DATA: file TYPE string.
*Initialization event
INITIALIZATION.
*At-selection-screen event
*To provide Input help for file name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR file1.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = file1.
*START-OF-SELECTION EVENT
START-OF-SELECTION.
MOVE file1 TO file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*To populate BDCDATA and start data transfer
LOOP AT itab .
To validate Plant range
IF itab-werks = '1000' OR itab-werks = '2000'
OR itab-werks = '1008'.
AT NEW werks.
CLEAR: n.
cnt = 1.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EORD-MATNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EORD-MATNR'
itab-matnr.
PERFORM bdc_field USING 'EORD-WERKS'
itab-werks.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0205'.
CONCATENATE 'EORD-EKORG(' cnt ')' INTO wa.
PERFORM bdc_field USING 'BDC_CURSOR'
wa.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
ENDAT.
IF n = 12.
READ TABLE bdcdata WITH KEY fval = '=BU'.
bdcdata-fval = '=NS'.
MODIFY bdcdata INDEX sy-tabix TRANSPORTING fval.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0205'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EORD-VDATU(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
cnt = 2.
n = 2.
ENDIF.
CONCATENATE 'EORD-VDATU(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-vdatu.
CONCATENATE 'EORD-BDATU(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-bdatu.
CONCATENATE 'EORD-LIFNR(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-lifnr.
CONCATENATE 'EORD-EKORG(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-ekorg.
CONCATENATE 'RM06W-FESKZ(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-feskz.
CONCATENATE 'EORD-AUTET(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-autet.
IF n <> 12.
n = cnt.
ENDIF.
cnt = cnt + 1.
AT END OF werks.
CALL TRANSACTION 'ME01' USING bdcdata
UPDATE 'S'
MODE 'A'.
CLEAR:bdcdata,bdcdata[].
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = sy-msgid
lang = 'EN'
no = sy-msgno
v1 = sy-msgv1
v2 = sy-msgv2
v3 = sy-msgv3
v4 = sy-msgv4
IMPORTING
msg = v_msg.
WRITE:/ v_msg.
CLEAR: bdcdata,bdcdata[],flag.
ENDAT.
ENDIF.
ENDLOOP.
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM.
Insert field values
FORM bdc_field USING fnam fval.
IF NOT fval IS INITIAL.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDIF.
CLEAR wa.
ENDFORM.
Sample code 2
THis is example to upload the Bank details of the Vendor which has the TC.
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Header file:
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
TC file:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards -
How to use table control in bdc briefly?
how to use table control in bdc briefly in description manner ?
Hi friend,
here i am giving exm. code of table control.see if help full to u.
REPORT zxk_01
NO STANDARD PAGE HEADING LINE-SIZE 255.
include bdcrecx1.
TYPES : BEGIN OF ty_data,
line(100) TYPE c,
END OF ty_data.
PARAMETERS: p_pcfile LIKE ibipparms-path DEFAULT 'D:\NKS.TXT'.
DATA : g_filename TYPE string.
TYPES : BEGIN OF ty_file,
lifnr(16) TYPE c, " vendor
bukrs(4) TYPE c, "company code
ktokk(4) TYPE c, " Acc grp
anred(15) TYPE c, " Title
name1(35) TYPE c, " name
sortl(10) TYPE c, " search term
stras(35) TYPE c, " street
ort01(35) TYPE c, " city
ort02(35) TYPE c, " district
land1(3) TYPE c, " country
pfach(10) TYPE c, " PO BOx
spras(2) TYPE c, " language
kunnr(10) TYPE c, " Customer
vbund(6) TYPE c, " trading partner
banks(3) TYPE c, " BANK COUNTRY
bankl(15) TYPE c, " BANK KEY
bankn(18) TYPE c, " BANK ACC
koinh(60) TYPE c, " ACC HOLDER
bkont(2) TYPE c, " CK
bvtyp(4) TYPE c, " BNKT
bkref(20) TYPE c, " REFERENCE DETAILS
namev(35) TYPE c, " first NAME
name2(35) TYPE c, " NAME
telf1(16) TYPE c, " TELEPHONE
abtnr(4) TYPE c, " DEPTT
pafkt(2) TYPE c, " FUNCTION
akont(10) TYPE c, " REC ACCOUNT
zuawa(3) TYPE c, " SORT KEY
lnrze(10) TYPE c, "HEAD OFFICE
fdgrv(10) TYPE c, " CASH MGMT GRP,
frgrp(4) TYPE c, " RELEASE GRP
zterm(4) TYPE c, " PAY TERMS
togru(4) TYPE c, " TOLERENCE GRP,
reprf, "CHECK DOUBLE INV
zwels(10) TYPE c, " PAYMENTS METHODS
zahls, " PAYMENTS BLOCK
hbkid(5) TYPE c, " house bank
zgrup(2) TYPE c, " grouping key
mahna(4) TYPE c, " dunn procedure
mansp, " DUNNING BLOCK'
gmvdt(10) TYPE c, " LEGAL DONE PROCEDURE
lfrma(10) TYPE c, " DUNN RECEPIENT
madat(10) TYPE c, " LAST DUNNED
mahns(1) TYPE c, " dunning level
mgrup(2) TYPE c, " grouping key
busab(2) TYPE c, "dunning clerk
END OF ty_file.
DATA : BEGIN OF it_xk01 OCCURS 0,
lifnr(16) TYPE c, " vendor
bukrs(4) TYPE c, "company code
ktokk(4) TYPE c, " Acc grp
anred(15) TYPE c, " Title
name1(35) TYPE c, " name
sortl(10) TYPE c, " search term
stras(35) TYPE c, " street
ort01(35) TYPE c, " city
ort02(35) TYPE c, " district
land1(3) TYPE c, " country
pfach(10) TYPE c, " PO BOx
spras(2) TYPE c, " language
kunnr(10) TYPE c, " Customer
vbund(6) TYPE c, " trading partner
akont(10) TYPE c, " REC ACCOUNT
zuawa(3) TYPE c, " SORT KEY
lnrze(10) TYPE c, "HEAD OFFICE
fdgrv(10) TYPE c, " CASH MGMT GRP,
frgrp(4) TYPE c, " RELEASE GRP
zterm(4) TYPE c, " PAY TERMS
togru(4) TYPE c, " TOLERENCE GRP,
reprf, "CHECK DOUBLE INV
zwels(10) TYPE c, " PAYMENTS METHODS
zahls, " PAYMENTS BLOCK
hbkid(5) TYPE c, " house bank
zgrup(2) TYPE c, " grouping key
mahna(4) TYPE c, " dunn procedure
mansp, " DUNNING BLOCK'
gmvdt(10) TYPE c, " LEGAL DONE PROCEDURE
lfrma(10) TYPE c, " DUNN RECEPIENT
madat(10) TYPE c, " LAST DUNNED
mahns(1) TYPE c, " dunning level
mgrup(2) TYPE c, " grouping key
busab(2) TYPE c, "dunning clerk
END OF it_xk01.
internal table for bank detaiils
DATA : BEGIN OF it_bank OCCURS 0,
banks(3) TYPE c, " BANK COUNTRY
bankl(15) TYPE c, " BANK KEY
bankn(18) TYPE c, " BANK ACC
koinh(60) TYPE c, " ACC HOLDER
bkont(2) TYPE c, " CK
bvtyp(4) TYPE c, " BNKT
bkref(20) TYPE c, " REFERENCE DETAILS
lifnr(16) TYPE c, " vendor
xezer, " CHECK
END OF it_bank.
INTERNAL TABLE FOR CONTACT PERSON
TYPES : BEGIN OF ty_cust,
lifnr(16) TYPE c,
namev(35) TYPE c, " first NAME
name1(35) TYPE c, " NAME
telf1(16) TYPE c, " TELEPHONE
abtnr(4) TYPE c, " DEPTT
pafkt(2) TYPE c, " FUNCTION
END OF ty_cust.
INTERNAL TABLES DECLARATION
DATA : it_bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE,
it_bdcmsgcoll LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE,
it_file TYPE TABLE OF ty_file,
it_data TYPE TABLE OF ty_data,
it_cust TYPE TABLE OF ty_cust.
WORK AREAS FOR TYPES
DATA : wa_xk01 LIKE it_xk01,
wa_data TYPE ty_data,
wa_file TYPE ty_file,
wa_bank LIKE it_bank,
wa_cust TYPE ty_cust.
*CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = lt_file
filetype = 'ASC'
CHANGING
data_tab = iT_DATA.
IF sy-subrc <> 0.
ENDIF.
g_filename = p_pcfile.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = g_filename "'D:\TESTDATA1_XK01.txt'
filetype = 'TXT'
has_field_separator = 'X'
HEADER_LENGTH = 0
read_by_line = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
replacement = ' '
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = it_file
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT it_file INTO wa_file .
ON CHANGE OF WA_FILE-LIFNR.
wa_xk01-lifnr = wa_file-lifnr.
wa_xk01-bukrs = wa_file-bukrs.
wa_xk01-ktokk = wa_file-ktokk.
wa_xk01-anred = wa_file-anred.
wa_xk01-name1 = wa_file-name1.
wa_xk01-sortl = wa_file-sortl.
wa_xk01-stras = wa_file-stras.
wa_xk01-ort01 = wa_file-ort01.
wa_xk01-ort02 = wa_file-ort02.
wa_xk01-land1 = wa_file-land1.
wa_xk01-pfach = wa_file-pfach.
wa_xk01-spras = wa_file-spras.
wa_xk01-kunnr = wa_file-kunnr.
wa_xk01-vbund = wa_file-vbund.
wa_xk01-akont = wa_file-akont.
wa_xk01-zuawa = wa_file-zuawa.
wa_xk01-lnrze = wa_file-lnrze.
wa_xk01-fdgrv = wa_file-fdgrv.
wa_xk01-frgrp = wa_file-frgrp.
wa_xk01-zterm = wa_file-zterm.
wa_xk01-togru = wa_file-togru.
wa_xk01-reprf = wa_file-reprf.
wa_xk01-zwels = wa_file-zwels.
wa_xk01-zahls = wa_file-zahls.
wa_xk01-hbkid = wa_file-hbkid.
wa_xk01-zgrup = wa_file-zgrup.
wa_xk01-mahna = wa_file-mahna.
wa_xk01-mansp = wa_file-mansp.
wa_xk01-gmvdt = wa_file-gmvdt.
wa_xk01-lfrma = wa_file-lfrma.
wa_xk01-madat = wa_file-madat.
wa_xk01-mahns = wa_file-mahns.
wa_xk01-mgrup = wa_file-mgrup.
wa_xk01-busab = wa_file-busab.
APPEND wa_xk01 TO it_xk01.
CLEAR : WA_XK01.
CONTINUE.
ENDON.
IF WA_FILE-BANKS NE ''.
wa_bank-lifnr = wa_file-lifnr.
wa_bank-banks = wa_file-banks.
wa_bank-bankl = wa_file-bankl.
wa_bank-bankn = wa_file-bankn.
wa_bank-koinh = wa_file-koinh.
wa_bank-bkont = wa_file-bkont.
wa_bank-bvtyp = wa_file-bvtyp.
wa_bank-bkref = wa_file-bkref.
wa_cust-lifnr = wa_file-lifnr.
wa_cust-namev = wa_file-namev.
wa_cust-name1 = wa_file-name2.
wa_cust-telf1 = wa_file-telf1.
wa_cust-abtnr = wa_file-abtnr.
wa_cust-pafkt = wa_file-pafkt.
APPEND wa_bank TO it_bank.
APPEND wa_cust TO it_cust.
APPEND wa_xk01 TO it_xk01.
CLEAR : wa_bank , wa_cust.
ENDIF.
ENDLOOP.
START-OF-SELECTION.
LOOP AT it_xk01 INTO wa_xk01.
REFRESH it_bdcdata.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
wa_xk01-lifnr. " vendor
PERFORM bdc_field USING 'RF02K-BUKRS'
wa_xk01-bukrs. " company cpode
PERFORM bdc_field USING 'RF02K-KTOKK'
wa_xk01-ktokk. " Acc group
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
wa_xk01-anred. " title
PERFORM bdc_field USING 'LFA1-NAME1'
wa_xk01-name1. " name
PERFORM bdc_field USING 'LFA1-SORTL'
wa_xk01-sortl. " ' search term'
PERFORM bdc_field USING 'LFA1-STRAS'
wa_xk01-stras. "street'
PERFORM bdc_field USING 'LFA1-PFACH'
wa_xk01-pfach. " po box
PERFORM bdc_field USING 'LFA1-ORT01'
wa_xk01-ort01. " city
PERFORM bdc_field USING 'LFA1-ORT02'
wa_xk01-ort02. " district
PERFORM bdc_field USING 'LFA1-LAND1'
wa_xk01-land1. " country
PERFORM bdc_field USING 'LFA1-SPRAS'
wa_xk01-spras. " language
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-VBUND'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-KUNNR' " customer
wa_xk01-kunnr.
PERFORM bdc_field USING 'LFA1-VBUND'
wa_xk01-vbund. " trading partner
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BKREF(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
DATA : fnam(20) TYPE c,
int TYPE c.
MOVE 1 TO int.
CLEAR wa_bank.
LOOP AT it_bank INTO wa_bank WHERE lifnr = wa_xk01-lifnr.
CONCATENATE 'LFBK-BANKS(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-banks. " city
CONCATENATE 'LFBK-BANKL(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bankl.
CONCATENATE 'LFBK-BANKN(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bankn.
CONCATENATE 'LFBK-KOINH(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-koinh.
CONCATENATE 'LFBK-BKONT(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bkont.
CONCATENATE 'LFBK-BVTYP(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bvtyp.
CONCATENATE 'LFBK-BKREF(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bkref.
int = int + 1.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0380'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KNVK-PAFKT(05)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
DATA : fnam1(20) TYPE c,
cnt.
cnt = 1.
CLEAR : wa_cust.
LOOP AT it_cust INTO wa_cust WHERE lifnr = wa_xk01-lifnr.
CONCATENATE 'KNVK-NAMEV(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-namev.
CONCATENATE 'KNVK-NAME1(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-name1.
CONCATENATE 'KNVK-TELF1(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-telf1.
CONCATENATE 'KNVK-ABTNR(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-abtnr.
CONCATENATE 'KNVK-PAFKT(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-pafkt.
cnt = cnt + 1.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0380'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KNVK-NAMEV(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FRGRP'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
wa_xk01-akont. " REC aCC
PERFORM bdc_field USING 'LFB1-ZUAWA'
wa_xk01-zuawa. " SORT KEY
PERFORM bdc_field USING 'LFB1-LNRZE'
wa_xk01-lnrze. " HEAD OFFICE
PERFORM bdc_field USING 'LFB1-FDGRV'
wa_xk01-fdgrv. " CASH MGMT GRP
PERFORM bdc_field USING 'LFB1-FRGRP'
wa_xk01-frgrp. " RELEASE GRP
PERFORM bdc_field USING 'LFB1-CERDT'
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZGRUP'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-ZTERM'
wa_xk01-zterm. " PAYMENT TERMS'
PERFORM bdc_field USING 'LFB1-TOGRU'
wa_xk01-togru. " TOLERENCE GRP
PERFORM bdc_field USING 'LFB1-REPRF'
wa_xk01-reprf. " CHECK DOUBLE INV
PERFORM bdc_field USING 'LFB1-ZWELS'
wa_xk01-zwels. " PAYMENT METHOD
PERFORM bdc_field USING 'LFB1-ZAHLS'
wa_xk01-zahls. " PAYMENT BLOCK
PERFORM bdc_field USING 'LFB1-HBKID'
wa_xk01-hbkid. " HOUSE BANK
PERFORM bdc_field USING 'LFB1-ZGRUP'
wa_xk01-zgrup. " GROUPING KEY
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-BUSAB'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB5-MAHNA'
wa_xk01-mahna. " DUNN PROCEDURE
PERFORM bdc_field USING 'LFB5-MANSP'
wa_xk01-mansp. " DUNNING BLOCK
PERFORM bdc_field USING 'LFB5-LFRMA'
wa_xk01-lfrma. " Dunn representative
PERFORM bdc_field USING 'LFB5-GMVDT'
wa_xk01-gmvdt. " legal dunn proc
PERFORM bdc_field USING 'LFB5-MADAT'
wa_xk01-madat. " last dunned
PERFORM bdc_field USING 'LFB5-MAHNS'
wa_xk01-mahns. " dunn level
PERFORM bdc_field USING 'LFB5-BUSAB'
wa_xk01-busab. " dunning clerk
PERFORM bdc_field USING 'LFB1-MGRUP'
wa_xk01-mgrup. " grouping key
CALL TRANSACTION 'XK01' USING it_bdcdata
MODE 'A'.
ENDLOOP.
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR it_bdcdata.
it_bdcdata-program = program.
it_bdcdata-dynpro = dynpro.
it_bdcdata-dynbegin = 'X'.
APPEND it_bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field
FORM bdc_field USING fnam fval TYPE any.
CLEAR it_bdcdata.
it_bdcdata-fnam = fnam.
it_bdcdata-fval = fval.
APPEND it_bdcdata.
ENDFORM. "bdc_field
*perform close_group. -
Hi All, How we can handle a table control in bdc - in detail its urgent pls
Hi All, How we can handle a table control in bdc - in detail its urgent. Please send me the explanation in detail.
Thanks®ards.
Bharathi,
Create Table Control
Step 1 (Create new structure for table control)
Type is name of structure (ZTC_EKKO) and press create
Step 2 (Create Program)
Goto transaction SE80(Object Navigator) -> Repository Browser -> Program.
Enter your program name, please ensure that is begins with SAPMZ as this is a module pool (dialog program).
Press enter to create, and press yes!
Ensure that you create a top include, and press Enter.
Accept the name created for the top include.
Press Enter.
Press Save
Step 3 (Create TOP include)
Double click on the top include and enter following ABAP code:
Tables: ZTC_EKKO.
controls: tc100 type tableview using screen 100.
data: ok_code type sy-ucomm.
data: it_ekko type standard
table of ZTC_EKKO initial size 0,
wa_ekko type ZTC_EKKO.
data: ok_code type sy-ucomm.
Press Save and Activate
Step 4 (Create screen)
Right click the program to create a screen 100 for the dialog. Enter Short description, set screen type to Normal and enter 0 or blank into Next screen. Then move to Element List tab and enter the OK code as OK_CODE (i.e. the same as what you declared in the top include with data: ok_code type sy-ucomm).
Step 5 (Create table control)
Press the Layout button to bring up the screen painter editor.
Press table control button and drag it on to the screen, enter the name of table control created in TOP include (TC100). Now press the yellow button for attributes and set the table control as below options
Step 6 (Populate table control )
Press the orange button (Fields). On the next screen enter ZTC_EKKO and press the Get from Dict button. Select the fields you want (all) and press enter. Now drag them onto your Table Control.
Below is the result, there will been syntax errors if we check now! So Save and go back into the flow logic tab.
Step 7 (Create flow control )
Within the flow logic of screen 100 and create two modules, one to select the data from the database and the other to move the selected fields into the table control. Also insert the two loop statements to populate and retrieve the lines of the table control.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
module data_retrieval.
loop at it_ekko into wa_ekko with control TC100.
module populate_screen.
endloop.
PROCESS AFTER INPUT.
loop at it_ekko.
endloop.
MODULE USER_COMMAND_0100.
Double click the module data_retrieval to create and click yes to get past the popup. Ensure that a new include is created to hold all the PBO modules (default). Press enter.
Select 10 rows of data from the EKKO table and load into the internal table it_ekko. Go back to the flow logic to load this data into the Table Control.
check this one
REPORT ZCALL_TRANS_TAB1 .
TABLES: LFA1,LFBK,lfb1.
data: BEGIN OF it_vendor occurs 0,
LIFNR LIKE LFA1-LIFNR,
bukrs like lfb1-bukrs,
END OF it_vendor.
DATA: BEGIN OF IT_BANK occurs 0,
LIFNR LIKE LFA1-LIFNR,
BANKS LIKE LFBK-BANKS,
BANKL LIKE LFBK-BANKL,
BANKN LIKE LFBK-BANKN,
koinh like lfbk-koinh,
END OF IT_BANK.
data: it_bdcdata like bdcdata occurs 0 with header line.
data: it_messages like bdcmsgcoll occurs 0 with header line.
*selection screen.
selection-screen: begin of block b1 with frame.
parameters: p_file like rlgrap-filename default 'c:/vendor.txt'
obligatory.
parameters: p_file1 like rlgrap-filename default 'c:/xyz.txt'
obligatory.
selection-screen: end of block b1.
*at selection screen.
at selection-screen on value-request for p_file.
perform f4_help using p_file.
at selection-screen on value-request for p_file1.
perform f4_help1 using p_file1.
*start of selection
start-of-selection.
*******uploading file
perform upload_file using p_file P_FILE1.
******open session.
perform populate_data.
*& Form f4_help
form f4_help using p_p_file.
data: l_file type ibipparms-path.
call function 'F4_FILENAME'
importing
file_name = l_file.
p_file = l_file.
endform. " f4_help
*& Form POPULATE_DATA
form populate_data .
DATA: L_STRING TYPE STRing.
DATA: L_COUNTER(2) TYPE n.
loop at it_vendor.
perform bdc_dynpro using 'SAPMF02K' '0106'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-D0130'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
it_vendor-lifnr.
perform bdc_field using 'RF02K-BUKRS'
it_vendor-bukrs.
perform bdc_field using 'RF02K-D0130'
'X'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-bankn(03)'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
*********bank details
CLEAR l_COUNTER.
LOOP AT IT_BANK WHERE LIFNR = IT_VENDOR-LIFNR.
l_COUNTER = l_COUNTER + 1.
clear l_string.
CONCATENATE 'lfbk-banks(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-banks.
clear l_string.
CONCATENATE 'lfbk-bankl(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-bankl.
clear l_string.
CONCATENATE 'lfbk-bankn(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-bankn.
endloop.
******CALL TRANSACTION.
call transaction 'FK02' using it_bdcdata mode 'A'
messages into it_messages.
write:/ sy-subrc.
perform format_messages.
clear it_bdcdata.
refresh it_bdcdata.
endloop.
endform. " POPULATE_DATA
*& Form FORMAT_MESSAGES
form format_messages .
data: l_msg(100).
loop at it_messages.
call function 'FORMAT_MESSAGE'
exporting
id = it_messages-msgid
lang = sy-langu
no = it_messages-msgnr
v1 = it_messages-msgv1
v2 = it_messages-msgv2
v3 = it_messages-msgv3
v4 = it_messages-msgv4
importing
msg = l_msg
exceptions
not_found = 1
others = 2
write:/ l_msg.
endloop.
endform. " FORMAT_MESSAGES
*& Form bdc_dynpro
form bdc_dynpro using value(p_program)
value(p_screen).
it_bdcdata-program = p_program.
it_bdcdata-dynpro = p_screen.
it_bdcdata-dynbegin = 'X'.
append it_bdcdata.
clear it_bdcdata.
endform. " bdc_dynpro
*& Form bdc_field
form bdc_field using value(p_fnam)
value(p_fval).
it_bdcdata-fnam = p_fnam.
it_bdcdata-fval = p_fval.
append it_bdcdata.
clear it_bdcdata.
endform. " bdc_field
*& Form upload_file
form upload_file using p_p_file
p_p_file1.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = P_P_FILE
FILETYPE = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = IT_VENDOR
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE I000(ZZ) WITH 'UNABLE TO UPLOAD'.
STOP.
ENDIF.
*******UPLOADING BANK DETAILS
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = P_P_FILE1
FILETYPE = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = IT_BANK
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE I000(ZZ) WITH 'UNABLE TO UPLOAD'.
STOP.
ENDIF.
endform. " upload_file
*& Form f4_help1
-->P_P_FILE1 text
form f4_help1 using p_p_file1.
data:l_file1 type ibipparms-path.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
FILE_NAME = l_file1.
p_file1 = l_file1.
endform. " f4_help1
http://sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
Sankar -
How to read a current line in table control in dialoug program ?
How to read a current line in table control in dialoug program ?
this code required to provide F4 help.Hi,
You can use the variable <tablecontrol>-Currentline as Ebus says but there is a problem with this.Suppose there are 10 records in the table control with only 5 records visible then when u press a page down and press F4 the first record in page 2, <tablecontrol>-Currentline will have value of 1 instead of 6.So you will need to write a small logic for that.
index = ( <tablecontrol>-topline - <tablecontrol>-currentline ) + 1.
read internal table itab at index.
Hope this helps.
Regards,
Vivek -
How to handle Table control in BDC? Difference between BDC & LSMW?
Hi
How to handle Table control in BDC? Difference between BDC & LSMW?
Regards,
RaghuHi ,
the diff b/w normal BDC and with table control is that with table control u can enter as many lineitems as u want..so during recording if u r entering 3 line items..then the program will show (1), (2) and (3) with that.
chane that fixed no to variable.
check that sample code.
in this for new customer...any no of items can be entered.
LOOP AT t_cusdata.
REFRESH t_bdcdata.
ON CHANGE OF t_cusdata-kunnr.
initial screen.
PERFORM bdc_dynpro USING 'SAPMV10A' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'MV10A-VTWEG'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'MV10A-KUNNR'
t_cusdata-kunnr.
PERFORM bdc_field USING 'MV10A-VKORG'
t_cusdata-vkorg. "'HCL'.
PERFORM bdc_field USING 'MV10A-VTWEG'
t_cusdata-vtweg. "'HL'.
DATA: fnam(20) TYPE c,
fnam1(20) TYPE c,
idx(2) TYPE c.
MOVE 1 TO idx.
LOOP AT t_matdata WHERE kunnr = t_cusdata-kunnr.
PERFORM bdc_dynpro USING 'SAPMV10A' '0200'.
CONCATENATE 'MV10A-KDMAT(' idx ')' INTO fnam.
PERFORM bdc_field USING 'BDC_CURSOR'
fnam.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
CONCATENATE 'MV10A-MATNR(' idx ')' INTO fnam1.
PERFORM bdc_field USING fnam1
t_matdata-matnr. "'FIN50'.
PERFORM bdc_field USING fnam
t_matdata-kdmat. "'ABCD'.
idx = idx + 1.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMV10A' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'
'MV10A-MATNR(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SICH'.
CALL TRANSACTION 'VD51' USING t_bdcdata MODE 'A' .
UPDATE 'S' MESSAGES INTO t_err_mes.
Regards,
Sonika -
Hi abapers how to handle table control in bdc
hi experts please guide me
how to handle table control in bdc? could u please explain me briefly
thanks and regardssayeed,
Go thru this code it may help you. check bold code for the table control..
report zsunil_bdc
no standard page heading line-size 255.
INTERNAL TABLES *
DATA: BEGIN OF IT_KNA1 OCCURS 0,
CUSTOMER LIKE RF02D-KUNNR,
COMPANY_CODE LIKE RF02D-BUKRS,
ACCOUNT_GROUP LIKE RF02D-KTOKD,
TITLE LIKE KNA1-ANRED,
NAME LIKE KNA1-NAME1,
SEARCH_TERM LIKE KNA1-SORTL,
STREET LIKE KNA1-STRAS,
CITY LIKE KNA1-ORT01,
POSTAL_CODE LIKE KNA1-PSTLZ,
COUNTRY LIKE KNA1-LAND1,
LANGUAGE_KEY LIKE KNA1-SPRAS,
CNTRY LIKE KNBK-BANKS,
BANK_KEY LIKE KNBK-BANKL,
BANK_ACCOUNT LIKE KNBK-BANKN,
REC_ACCOUNT LIKE KNB1-AKONT,
END OF IT_KNA1.
DATA: IT_BDCDATA TYPE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA: IT_MESSAGES TYPE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
SELECTION SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER P_FILE TYPE RLGRAP-FILENAME DEFAULT 'C:\CUSTOMER.TXT'
OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION SCREEN *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
PERFORM HELP_FILE USING P_FILE.
START OF SELECTION *
START-OF-SELECTION.
*UPLOADING THE FILE FROM WORKSTATION
PERFORM UPLOAD_FILE USING P_FILE.
*POPULATING DATA.
PERFORM POPULATE_FILE.
*& Form HELP_FILE
text
-->P_P_FILE text
form HELP_FILE using p_p_file.
DATA: L_FILE TYPE IBIPPARMS-PATH.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
FILE_NAME = L_FILE.
P_P_FILE = L_FILE.
endform. " HELP_FILE
*& Form UPLOAD_FILE
text
-->P_P_FILE text
form UPLOAD_FILE using p_p_file.
CALL FUNCTION 'UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = 'P_P_FILE'
FILETYPE = 'DAT'
ITEM = ' '
FILEMASK_MASK = ' '
FILEMASK_TEXT = ' '
FILETYPE_NO_CHANGE = ' '
FILEMASK_ALL = ' '
FILETYPE_NO_SHOW = ' '
LINE_EXIT = ' '
USER_FORM = ' '
USER_PROG = ' '
SILENT = 'S'
IMPORTING
FILESIZE =
CANCEL =
ACT_FILENAME =
ACT_FILETYPE =
TABLES
data_tab = IT_KNA1
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " UPLOAD_FILE
*& Form POPULATE_FILE
text
--> p1 text
<-- p2 text
form POPULATE_FILE .
DATA: L_STRING TYPE STRING,
L_COUNTER(2) TYPE N,
V_INDEX TYPE SY-TABIX.
LOOP AT IT_KNA1.
V_INDEX = SY-TABIX.
AT NEW CUSTOMER.
READ TABLE IT_KNA1 INDEX V_INDEX.
IF SY-SUBRC = 0.
perform bdc_dynpro using 'SAPMF02D' '0105'.
perform bdc_field using 'BDC_CURSOR'
'RF02D-KTOKD'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02D-KUNNR'
IT_KNA1-CUSTOMER.
perform bdc_field using 'RF02D-BUKRS'
IT_KNA1-COMPANY_CODE.
perform bdc_field using 'RF02D-KTOKD'
IT_KNA1-ACCOUNT_GROUP.
*PERFORM BDC_FIELD USING 'RF02D-D0130'
'X'.
perform bdc_dynpro using 'SAPMF02D' '0110'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-SPRAS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'KNA1-ANRED'
IT_KNA1-TITLE.
perform bdc_field using 'KNA1-NAME1'
IT_KNA1-NAME.
perform bdc_field using 'KNA1-SORTL'
IT_KNA1-SEARCH_TERM.
perform bdc_field using 'KNA1-STRAS'
IT_KNA1-STREET.
perform bdc_field using 'KNA1-ORT01'
IT_KNA1-CITY.
perform bdc_field using 'KNA1-PSTLZ'
IT_KNA1-POSTAL_CODE.
perform bdc_field using 'KNA1-LAND1'
IT_KNA1-COUNTRY.
perform bdc_field using 'KNA1-SPRAS'
IT_KNA1-LANGUAGE_KEY.
perform bdc_dynpro using 'SAPMF02D' '0120'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02D' '0130'.
PERFORM BDC_FIELD USING 'RF02D-D0130'
'X'.
perform bdc_field using 'BDC_CURSOR'
'KNBK-BANKN(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02D' '0210'.
perform bdc_field using 'BDC_CURSOR'
'KNB1-AKONT'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
perform bdc_field using 'KNB1-AKONT'
IT_KNA1-REC_ACCOUNT.
perform bdc_dynpro using 'SAPLRSFH' '0100'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'RSIODYNP4-LOW(01)'.
ENDIF.
ENDAT.
L_COUNTER = L_COUNTER + 1.
CLEAR L_STRING.
CONCATENATE 'KNBK-BANKS(' L_COUNTER ')' INTO L_STRING.
PERFORM BDC_FIELD USING L_STRING
IT_KNA1-CNTRY.
CLEAR L_STRING.
CONCATENATE 'KNBK-BANKL(' L_COUNTER ')' INTO L_STRING.
PERFORM BDC_FIELD USING L_STRING
IT_KNA1-BANK_KEY.
CLEAR L_STRING.
CONCATENATE 'KNBK-BANKN(' L_COUNTER ')' INTO L_STRING.
PERFORM BDC_FIELD USING L_STRING
IT_KNA1-BANK_ACCOUNT.
AT END OF CUSTOMER.
READ TABLE IT_KNA1 INDEX V_INDEX.
IF SY-SUBRC = 0.
CALL TRANSACTION 'FD01' USING IT_BDCDATA MODE 'A' UPDATE 'S' MESSAGES
INTO IT_MESSAGES.
IF SY-SUBRC <> 0.
PERFORM EMPLOYEEID_ERROR.
*ELSE.
ENDIF.
WRITE: SY-SUBRC.
perform message_format_write.
*ENDIF.
*WRITE: SY-SUBRC.
CLEAR IT_BDCDATA.
REFRESH IT_BDCDATA.
ENDIF.
ENDAT.
ENDLOOP.
endform. " POPULATE_FILE
*& Form bdc_dynpro
text
-->P_0224 text
-->P_0225 text
form bdc_dynpro using value(p_0224)
value(p_0225).
IT_BDCDATA-PROGRAM = P_0224.
IT_BDCDATA-DYNPRO = P_0225.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
CLEAR IT_BDCDATA.
endform. " bdc_dynpro
*& Form bdc_field
text
-->P_0229 text
-->P_0230 text
form bdc_field using value(p_0229)
value(p_0230).
IT_BDCDATA-FNAM = P_0229.
IT_BDCDATA-FVAL = P_0230.
APPEND IT_BDCDATA.
CLEAR IT_BDCDATA.
endform. " bdc_field
*& Form EMPLOYEEID_ERROR
text
--> p1 text
<-- p2 text
form EMPLOYEEID_ERROR .
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = 'Z50583_REC1'
HOLDDATE = FILLER8
KEEP = 'X'
USER = SY-UNAME
RECORD = FILLER1
PROG = SY-CPROG
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FD01'
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
dynprotab = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " EMPLOYEEID_ERROR
*& Form message_format_write
text
--> p1 text
<-- p2 text
form message_format_write .
DATA: L_MSG(200).
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = SY-MSGID
LANG = SY-LANGU
NO = SY-MSGNO
V1 = SY-MSGV1
V2 = SY-MSGV2
V3 = SY-MSGV3
V4 = SY-MSGV4
IMPORTING
MSG = L_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
WRITE: / L_MSG.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " message_format_write
~~Guduri -
How to delete a column from the table control in module pool?
Hi,
can any one please tell How to delete a column from the table control in module pool?
thanks in advance
warm regards
HareeshKumar Nhi hareesh,
I think it is better to hide it.
How to hide: You can check this link
Dynamic Hide column in table control
Maybe you are looking for
-
IPhoto 9.2 crash after lion update
iPhoto won't start up after recent update. error message log below, any ideas? Process: iPhoto [2144] Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto Identifier: com.apple.iPhoto Version: 9.2 (9.2) Build Info:
-
It is possible to play music through Apple TV without has the TV on ? I would like to stream all my music from Itunes to Apple TV - and use Ipod touch as a remote. But do I have to turn the TV on ? and will the Ipod touch app - Remote - connect to th
-
Converting from Vinyl to digital and removing hiss
We just got this new turntable that will convert old 45s to digital but the recordings have a lot of hiss because of the age of the vinyl itself. Is there any way to remove the hiss in logic? If not is there a recommended program?
-
Quiz - not recognising correct answers
Just trying to create a quiz using Captivate. I thought I had it figured out, except that it doesn't seem to recognise correct answers. http://www.learners-guide.co.uk/quiztest/captivate/tests/test3/test3/index.html I have selected the checkbox for Q
-
Overdrive -- A audio program used by my library -- not available to my iPod
Why can't I use my iPod with this service? Our audio titles use Windows Media DRM copyright protection technology from Microsoft Corporation. Unfortunately the iPod does not currently support copyright-protected Windows Media Audio (.wma) and video (