How do I import text into the Keynote Titile
I am trying to use the Keynote title in FCPX - I have "imported" the title over the picture image clip that I want to use, and that works fine, but I am having extreme difficulty in changing the text in the boxes that appear from ex TITILE to what text I want to appear. I click on the box and maybe the text appears in the Inspector and I can change it, then move to the next box - even with the Select tool in action, I clcik away at this next box and it will not select it, so cannot change the text from say INTRODUCTION to what I want.
Can anyone help me out on this - otherweise I shall abandon this title and try a different one.
Thanks
*** I GOT IT!!!!! ***
I was getting really frustrated being the only one who COULDN'T figure this out... I GOT IT!!!
1. Drag the Title to your Editor
2. Place your playhead cursor over the middle-ish area of the title.
3. With the title selected, Double-Click anywhere on your preview, that will select your dropzone and give you a white-glove cursor.
4. Slide the dropzone to the opposite side of your text. (don't worry, just put it back later)
5. Click off of selected title in timeline (click in the background or another clip)
6. Re-select your title clip.
7. Now Double-Click the text you want to edit.
8. When you're finished just double-click on the dropzone area again to "white-glove" it back!
I never really contribute to message threads so, I guess it's about time I start eh?
-David Tandy
Similar Messages
-
How do I import and use the Keynote themes that I've downloaded?
I'm sure this is a stupid question, but I searched this forum & didn't immediately find the answer I needed. I've downloaded some Keynote themes (they have a .kth extension). How do I import these into Keynote 08 so that Keynote will recognize and use the themes?
Thanks!Put the .kth in "Themes" folder under the route Home > Library > Application Support > iWork > Keynote > Themes - it will then appear (at the bottom) in the theme chooser when opening keynote.
-
How do I import audiobooks into the right place in my Ipod?
I have Windows and am struggling with getting audiobooks to actually go into the "audiobooks" designation on teh left hand side of the screen.
What they are actually doing is being listed as "books and spoken" and remaining in my music library.
Can someone help this confused Kansas dude out?Try here:
http://www.google.com/support/mobile/bin/answer.py?hl=en&answer=138740 -
HOW CAN I IMPORT TEXT FROM MICROSOFT WORD TO THE WEB PAGE?
HOW CAN I IMPORT TEXT FROM MICROSOFT WORD TO THE WEB PAGE?
Another method is tosave your Word document as an a web page. Then open the htm file, copy the text and paste into an HTML snippet on your web page. Resize to show all the document and publish. It will retain the style, font and alignment of the original Word document.
OT -
My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years and I can't recall how.
If you had stored your catalog files on an external drive, then all you have to do is double-click on them to open them and use them.
Or you could move them to the internal drive and double-click on them once the move is completed.
To create a single catalog file from multiple ones, you could use File->Import from Another Catalog -
How can I import text produced in Pages into Adobe inDesign?
How can I import text produced in Pages into Adobe inDesign?
Menu > File > Export > Word .doc/x
I doubt it will do graphics and layout, but maybe, depending on your version of Indesign you may hit lucky (but probably not).
Peter -
I have just used migration assistant to import photos (using an ethernet cable) from my PC. It has worked but they have gone into a new user on my MacPro. How can I merge them into the one user account.
How many pictures (or how many bytes) are we talking? Now that the pictures are imported one way to cross users is to use a removable drive (although large volumes of files preclude this).
The other is to login as the user where the pictures are, then copy them into the public drop box of the user where you want the picture.
The arrow is showing (in ths example) copy files from the Pictures folder for my user to the guest user accounts public dropbox. When you do this you may have to authenticate and you won't be able to see the results of the copy until you log in as the other user.
All users are in the folder "/Users/" -
I need the ability to paste a bunch of text into the subject line but for it only to capture the first 50 or x number of characters. Can I limit the size of the subject line characters somehow in an ini or profile setting?
If your problem is with Mozilla Thunderbird, see this forum for support.
[https://support.mozillamessaging.com/en-US/home] <br />
or this one <br />
[http://forums.mozillazine.org/viewforum.php?f=39] -
Import text into a form from a tab delimited file using an action
Good evening.
I am using Adobe Acrobat XI Pro
I have been working all weekend so far on this, and have tried many options.
What I am wanting is to import a line of data from an excel file into a form, save the file with a name drived from the form fields, close the new file, then go back to the original file, import a line of data, and so on and so on.
I had all of this working in livecyle with a tool, but now that we are going to Windows 8 and Microsoft Office 2013, the driver that I need to load the excel file into the form is not available--so now I have to redo the forms in Adobe and import using a tab delimited file.
I would like to do this with an action.
Thus far, I have the following.
**Credit goes to George Johnson who helped me with the script to save the file using field names a few months ago**
To start, I have a folder level script
mySaveAs = app.trustPropagatorFunction(function(doc,path)
app.beginPriv();
var myDoc = event.target;
myDoc.saveAs(path);
app.endPriv();
myTrustedSpecialTaskFunc = app.trustedFunction(function(doc,path)
//privileged and/or non-privileged code above
app.beginPriv();
mySaveAs(doc, path);
app.endPriv
//Privileged and/or non-privileged code below
For the Action, I start with the Form file loaded
Then I execute a javascript to import the text into the file.
this.importTextData("/c/data/clerical.txt");
The next step is to save the file using field names as part of the file name
--credit goes to George Johnson who assisted me with this on a similar project a few months ago.
//Get the Field Value
var fn=getField("Last").valueAsString + "-" + getField("First").valueAsString;
//Specify the folder
var fldr = "/c/data/";
//Determine the full path
var fp=fldr + fn + ".pdf";
//save the file
myTrustedSpecialTaskFunc(this, fp);
That is as far as I have gotten.
What I want to do now is load the original form file, import the next line into the form, save the file, repeat.
If anyone could assist me, I would greatly appreciate it.
**note I had to type this from my I-pad because I kept getting kicked off the internet from my computer. I hope my code is typed correctly.George
Thank you so much for your response.
Yes--there are multiple lines in the data file--it will vary from month to month. It looks like from what you are saying is that I need to do the global variable since it will constantly change, and then increment it as it goes through the text file. When it reaches the end, then it will stop.
I looked at the following links--but this is from Adobe 9 API--I don't know if things have changed with XI--especially since 9 used batch processing and XI has actions.
Count PDF Files
http://help.adobe.com/livedocs/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/js/html/ wwhelp.htm?href=JS_API_AcroJS.88.1.html
Global counter
http://help.adobe.com/livedocs/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/js/html/ wwhelp.htm?href=JS_API_AcroJS.88.1.html
I am not exactly sure how to include this in my code.
If you could point me in the right direction, I would appreciate it. -
How to sending simple text in the mail body
Hi friends,
How to send simple text in the mail body through ABAP code
plz send me the related code and setting for that mail.
Thanks&Regards,
Srinivastry this...
FORM send_file_as_email_attachment .
DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
DATA: objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA : i_body TYPE soli_tab WITH HEADER LINE.
DATA: it_attach LIKE it_display1 OCCURS 0 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
DATA: att_lines TYPE i.
DATA: lv_lines TYPE i.
DATA: file TYPE string.
data: g_datum like sy-datum.
data: g_datum1(10) type c.
DATA: len TYPE n.
LOOP AT it_email.
CLEAR : objpack,
objhead,
objbin,
objtxt,
reclist.
REFRESH: objpack,
objhead,
objbin,
objtxt,
reclist.
g_datum = sy-datum - 1.
concatenate g_datum6(2) '.' g_datum4(2) '.' g_datum+0(4) into
g_datum1.
doc_chng-obj_descr = 'Aged Stock more than 45 Days'.
CONCATENATE 'Aged Stock more than 45 Days' '-' it_email-vkbur INTO
doc_chng-obj_descr.
CONCATENATE 'Please find enclosed Aged Stock Details ( >45days ) report as on'
g_datum1
INTO objtxt-line SEPARATED BY space.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
objtxt-line = 'Regards'.
APPEND objtxt.
objtxt-line = 'LIS SAP Projects'.
APPEND objtxt.
objtxt-line =
'PS: Pls send feedback for futher improvements to SAP office.'.
APPEND objtxt.
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 1.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
objpack-obj_name = 'Run_prog'.
objpack-obj_descr = 'Agestock.txt'.
lv_lines = tab_lines.
APPEND objpack.
*CONCATENATE 'Plant' 'Material Number' 'Qty(More than 45days)'
*'Amount' INTO
it_display SEPARATED BY space.
append objbin.
clear: objbin.
CLEAR:it_display2.
REFRESH it_display2.
it_display2-werks = 'Plant|'.
it_display2-matnr = 'Material Number'.
it_display2-qty = '|Qty > 45 days'.
it_display2-amount = ' |Amount'.
APPEND it_display2.
it_display2-werks = ''.
it_display2-matnr = ''.
it_display2-qty = ''.
it_display2-amount = ''.
APPEND it_display2.
CLEAR : it_display2.
sort it_display1 by amount descending.
LOOP AT it_display1 WHERE werks = it_email-vkbur.
AT FIRST.
*CONCATENATE 'Plant ' 'Material Number' 'Qty(More than 45days)'
*'Amount' INTO
objbin-line SEPARATED BY space.
append objbin.
clear: objbin.
ENDAT.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = it_display1-matnr
IMPORTING
output = it_display1-matnr.
it_display1-qty = TRUNC( it_display1-qty ).
MOVE-CORRESPONDING it_display1 TO it_display2.
APPEND it_display2.
CLEAR:it_display1,it_display2,objbin.
CLEAR:it_display1.
ENDLOOP.
objbin[] = it_display2[].
DESCRIBE TABLE objbin LINES tab_lines.
objhead = 'Suug'.
APPEND objhead.
objpack-transf_bin = 'X'.
objpack-head_start = 3.
objpack-head_num = 1.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
objpack-obj_name = 'Run_prog'.
objpack-obj_descr = 'Agestock.txt'.
APPEND objpack.
reclist-receiver = '[email protected]'.
reclist-rec_type = 'U'.
APPEND reclist.
=====================================================================
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = doc_chng
commit_work = 'X'
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
CLEAR : it_email.
ENDLOOP.
ENDFORM. "send_mail
Message was edited by:
Sugumar Ganesan -
How do I put text into an Edge File that clients can edit easily afterwards
Hi
Can anyone explain how I can put text into an edge file (styled with google fonts) and make it so that clients can access the text and update the text as they require?
Previous suggestion was dynamically loading a .txt file - any instructions would be most appreciated.
Thanks.Hi Resdesign!
Your code is very useful to learn how to use Json in Adobe Edge Animate!
But I have a question: why you use ( i ) as argument of the function UpdateInfo and when you recall it you use ( index )?
$.getJSON('slides.json', function(data){
//for(var i=0; i<data.length; i++){
function updateInfo(i){
sym.$("photo").css({"background-image": "url('"+data[i].image+"')"});
sym.$("pillar").html(data[i].pillar);
sym.$("what").html(data[i].what);
// position
index = -1;
sym.$("btn").click(function(){
index++;
if (index>=5){
index = 0;
updateInfo(index);
Many thanks for your attention!
Davide -
How do I import Edge into muse?
How do I import Edge into muse?
Hi,
Please refer to the following link http://helpx.adobe.com/en/muse/tutorials/inserting-edge-content-muse-website.html
Regards,
Aish -
How to add a report into the SAP-SCRIPT .using PERFORM ......ENDPERFORM
My question is that How to add a report into the SAP-SCRIPT .
by using PERFORM ......ENDPERFORM
I don't know how to used it .Hi Sandeep,
Please check this link
http://help.sap.com/saphelp_40b/helpdata/en/d1/803279454211d189710000e8322d00/content.htm
http://www.allinterview.com/showanswers/37425.html
Calling ABAP Subroutines: PERFORM
You can use the PERFORM command to call an ABAP subroutine (form) from any program, subject to the normal ABAP runtime authorization checking. You can use such calls to subroutines for carrying out calculations, for obtaining data from the database that is needed at display or print time, for formatting data, and so on.
PERFORM commands, like all control commands, are executed when a document is formatted for display or printing. Communication between a subroutine that you call and the document is by way of symbols whose values are set in the subroutine.
Syntax in a form window:
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
The ABAP subroutine called via the command line stated above must be defined in the ABAP report prog as follows:
FORM <form> TABLES IN_TAB STRUCTURE ITCSY
OUT_TAB STRUCTURE ITCSY.
ENDFORM.
The values of the SAPscript symbols passed with /: USING... are now stored in the internal table IN_TAB . Note that the system passes the values as character string to the subroutine, since the field Feld VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR 80). See the example below on how to access the variables.
The internal table OUT_TAB contains names and values of the CHANGING parameters in the PERFORM statement. These parameters are local text symbols, that is, character fields. See the example below on how to return the variables within the subroutine.
From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (u2018First pageu2019, u2018Next pageu2019, u2018Last pageu2019) is printed as local variable symbol.
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY u2018PAGEu2019.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018NEXTPAGEu2019.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018BARCODEu2019.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = u2018|u2019. "First page
ELSE.
OUT_PAR-VALUE = u2018||u2019. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = u2018Lu2019. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
Best regards,
raam -
Just started using my Mac Mail program instead of web mail. When I went to attach two pdf files, one attached as a file, the other inserted all the text into the body of the email message. How do I get it to attach both pdf's as files?
I think you're confusing two different things. If you attached PDF files and one of them displayed the PDF icon in the message window, that means it was more than one page. If you saw what appeared to be the actual document for the other PDF file, that means it's only one page and it's normal for it to display that way.
However, I seem to recall there may (or should) be a button at the bottom-right of the message window that allows you to display those files as icons, even if they're one page. If not, there's a third-party addition you can use to add that feature:
http://lokiware.info/Attachment-Tamer -
How to include a report into the SAP-SCRIPT
plz tell me
How to include a report into the SAP-SCRIPT
ASAPcreat a z report like this....................
REPORT zmmgl_picklist1.
TABLES : likp,ltap,ltak.
data : lv_NUM1 type c .
data : lv_NUM type c.
*& Form get_data1
text
-->IN_DATA text
-->OUT_DATA text
FORM get_data1 TABLES in_data STRUCTURE itcsy
out_data STRUCTURE itcsy.
READ TABLE in_data WITH KEY name = 'LTAP-VBELN'.
lv_NUM = lv_NUM1 + 1.
out_data-name = 'lv_NUM'.
out_data-value = lv_NUM .
APPEND out_data.
endform.
*& Form get_data
This form is to read details from LIKP *
-->IN_DATA text
-->OUT_DATA text
FORM get_data TABLES in_data STRUCTURE itcsy
out_data STRUCTURE itcsy.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single bldat from likp into likp-bldat where lgnum = ltap-lgnum.
out_data-name = 'LIKP-BLDAT'.
out_data-value = likp-bldat.
APPEND out_data.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single vstel from likp into likp-vstel where lgnum = ltak-lgnum .
out_data-name = 'LIKP-VSTEL'.
out_data-value = likp-vstel.
APPEND out_data.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single kunnr from likp into likp-kunnr where lgnum = ltap-lgnum.
out_data-name = 'LIKP-KUNNR'.
out_data-value = likp-kunnr.
APPEND out_data.
ENDFORM. "get_data.
after this go to the script editor......
/: perform get_data in program zmmgl_picklist1.
/: using <ap-vbeln& (Reference field.this field should be there in both program and script.....)
/:changing &likp-bldat&
/:changing &likp-vstel&
/:changing &likp-kunnr&
\[removed by moderator\]
Regards
Anbu
Edited by: Jan Stallkamp on Jun 10, 2008 2:26 PM
Maybe you are looking for
-
I want to delete my mobile me account not just from my iPhone but from existence. I want to delete it so that no emails can be received to it, and the sender would receive an undeliverable message. Is this possible?
-
My Ipad2 no longer connects to my hotspot on my Iphone 4
It worked for about a week and then stopped connecting to my hotspot and then I tried with my husbands iphone and it also would not connect but the ipad will connect to my home wifi. Any suggestions???
-
IND CS4: Bug with "On Next Odd Page"
Hi - I'm seeing something strange in my doc. I have the title of my document styled to start "On Next Odd Page". If I make the title (which is in a text var) more than the width of the page, my entire 25 page doc goes blank. It appears that everythin
-
Where are draw app 4 source code?
how to get the draw app 4 source code in java web start
-
Newbie, I lost my time line and other windows. Please help!!
Can't figure out how to get my windows back. I have gone to arrange, But that didn't work. Please help. Thanks, Ted