How do i install a hp laser jet 4l printer on windows7

how do i install a hp laser jet 4l printer on windows7 Where do I get the drivers

The driver is delivered through Windows Update as described here.  
You could also use the Windows 7 driver finder tool at http://www.hp.com/go/tools.
If you do not have a parallel port on your Windows 7 machine you may need a USB-parallel converter cable.  The models mentioned in the posts tagged here have been verified by users to work in Windows 7.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • How do I use my HP Laser Jet 4M  printer work with my OS 10.9 MacBook Pro

    A "newbie" here.  I am having trouble getting my new Macbook Pro and its 10.9 OS to accept my HP Laser Jet 4M+ printer.  HP apparently does not support the Mac's OS10.9. Any help appreciated.

    Ok, I've downloaded the drivers as suggested.but still not printing as it should.
    It's now printing one page as opposed to many, but it still has the jargon on top of the page as depicted in my original post?
    From this info you advised, it does suggest, does it not, that the HP Laser Jet 6p is supported.
    Meanwhile, any other advice.
    Regards

  • How do i make my hp laser jet p1102w printer wireless using bright house modem

    How do I make my printer wireless without having to hook the computer to the printer.  I have the Bright house moden and internet services.

    Hi,
    The printer supports wireless connection. Please use information from the following link to set it up:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c02847467
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I set up a Laser Jet 4000 to work wirelessly​?

    How do I set up a Laser Jet 4000 to work wirelessly?  I followed the prompts but don't know what IP address to enter.  Is it 192.168.1.1  or is it unique to us?  We have Verizon FIOS.  Where  can I find the best ongoing support online?  
    In looking at similarquestions here (unanswered, from 2009) I saw that someone bought a wireless  printing kit.  Do I need               
    to do so and where can I buy it?
    Do I need to connect it to the wireless router and if so, which connection on the printer do I use?
    Thanks.

    Do I need to connect it to the router, and, if so, which connection should I use (serial, # pin, etc.)

  • Cannot install my HP laser jet 1225n.

    Cannot install my HP laser jet 1225n. The software installs but does not show in print and scan and cannot be added in print and scan. Message received as follows.Can't install the software for the Hewlett-Packard HP LaserJet CP1525N because it is not currently available from the Software Update server.
    Pleae help

    Hi,
    Download and install teh Full Feature Software from HP below:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-107388- 1&cc=emea_middle_east&dlc=en&lc=en&os=219&product=4052977&sw_lang=
    After completing the installation be sure to reboot your Mac, then click the Apple icon and select Software Update, be sure to select any listed HP Update to ensure you use the latest drivers.
    Please let me know of any problem,
    Shlomi

  • Mac OSx 10.8.5 and HP laser jet 2100M printer w/ driver version 19.8--Doesn't print!

    I've got a macbook pro with Mac OSx 10.8.5. I've successfully printed with my HP Laser jet 2100M printer until recently. The driver version is 19.8. I don't know what changed but about a month ago the printer says "printing--connected to printer" but it never prints. What do I need to do to get my printer and my macbook to communicate again and start printing? I also have a mac mini desktop running on mac osx 10.7.5 and it doesn't talk to the HP Laser jet 2100M either (also driver 19.8.Please, can you tell me how configure so these macs will be able to print to my printer?

    I have had a similar issue with my HP LaserJet 1320 printer on OS X 10.8. On certain PDF files (only those that I have tested so far), the data will send fine from the computer (and the job goes away) but the printer balks and drops the print job on its end. It's only when I save it as an image in Preview and then print will it work (advice from this forum post). However, when I updated the driver from 19.8 to 19.13 (in the Apple Software Update), it seemed to fix it.  Do you know what changed between 19.8 to 19.13? 

  • How do I install the Adobe PDF Pack Desktop Printer

    How do I install the Adobe PDF Pack desktop printer?

    If you’re running the standalone version of FM, then the “headless” Acrobat comes with it; reinstall FM to repair that part. However, if you already had a full version of Acrobat installed, the FM installer may have screwed it up – you’ll have to uninstall all Acrobat(s) and reinstall.

  • Can't print to hp laser jet 1020 printer connected to airport express

    Hello All - I recently bought an airport extreme so I am doing some re-configuring of my home network but I am having issues getting the desired out come.
    I have the airport extreme connected to the modem. From the extreme in another room, I have an airport express connected to the airport extreme wirelessly (I set that up through the airport utility without any problems.)  Now I want to connect my usb hp laser jet 1020 printer the airport express to print from.  I have a windows 7 machine.  I can see the printer connected to the airport express through the airport utility.  I have tried to use the bonjour print service to set up the print connection.  Bonjour sees the printer connected as well, I run through all the prompts and click finish, but when I go to print something, it goes to print que and nothing happens. (side note, the printer works just fine when connected directly to the computer).
    So I guess my question is, it appears the computer sees that my printer is connected to the airport express. But some point along the way, when I go to print, the message gets lost or goes to the wrong place. I am on the right track?  Any other suggestions?
    Thanks.

    Does "plugged into it" mean that the printer is connected using USB or Ethernet?
    If USB, have you run Bonjour for Windows to find and configure the printer?  (Pages 16-17 in the Setup Guide)
    Bonjour Print Services for Windows v2.0.2

  • What is the life expectancy of the hp laser jet p3015 printer?

    What is the life expectancy of the hp laser jet p3015 printer?

    What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?
    Apple has never published any life expectancy specifications for any of their routers (or desktops/laptops) that I am aware of. As a rule of thumb, I would consider two years for any consumer electronics that operates 24 x 7 to be a reasonable period. Obviously some experience more or less and it would depend on a number of factors: ambient temperature, electrical circuit stability, area prone to lightening strikes, etc.
    Some telltale signs that an AirPort has (or is about to fail):
    Status lights are not illuminated or do not match any of the known configurations.
    Unit feels cool to the touch after power is applied even after a lengthly (15-30 minutes) period of time.
    Unit refuses to intialize, even after performing multiple "factory default" resets.
    Weak or no wireless signal.
    Ethernet port(s) not functioning
    Etc.
    Also, are there any compatiility issues with newer models and G5/G4s?
    Three potential issues:
    Depending on the version of OS X you are running on these clients, they may not be able to support the latest AirPort Utility required to administer the latest AirPorts. OS X 10.5.7 is the minimum required.
    Support for 802.11n connectivity. Most G5 or G4 Apples support 802.11g, some only 802.11b.
    Support for WPA2. Not supported if the G5 or G4 is equipped with the Original AirPort Card.

  • How to install a HP Laser Jet 4 Plus

    I have successfully installed my HP PhotoSmart 7520 but I have a workhorse printer that I would like hooked up to my new HP Notebook also......it is a Newlett Packard Laser Jet 4 Plus.  It is not listed as a choice and I would really like to use it. Any help would be appreciated. Thank you.

    Any of the laserjet models that have a front panel (touchscreen) and the option to print a Supplies Status page can provide this information. The Supplies Status page shows how many pages each of the current toner bins have printed since installation.
    Make sure to check that the printer has a Supplies Status page in the Reports submenu of the Setup menu. Hope this helps.
    example: the Laserjet Pro 200 M276nw has this feature.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • How to connect fax in Hp laser jet m 1005

    I have a HP Laser Jet M 1005, How can i connect fax in Hp laser jet m 1005

    Hi, I think it ONLY supports Print, Scan and Copy. No Fax as in its manual:    h10032.www1.hp.com/ctg/Manual/c00682960.pdf Regards.   

  • Help, Upgraded to Yosemite and now my HP Laser jet 1320 printer will not work!

    Two days ago I upgraded to Yosemite on my Imac. Now my HP 1320 Laser jet will not print at all!!! I need a printer for my eBay business ASAP and this is not good. The printer is a driver version 19.8 Is it compatible with the new program? I am so frustrated.

    Hello k1watt,
    Thanks for using Apple Support Communities.
    From your post I see that you're unable to print to your HP LaserJet 1320 series after upgrading to Yosemite on your Mac.  I defintely understand how frustrating this is, especially since printing is vital to your business.  The printer driver version 19.8 is the most current version available.  To troubleshoot the issue however where you're unable to print, please follow the steps in the article below.
    USB printers and Bonjour-enabled network printers
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel.Note:If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    UseSoftware Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Deletethe affected printer, thenaddthe printer again.
    If the issue persists, try these additional steps:
    Resetthe printing system, then add the printer again.
    If the issue still persists,resetthe printing system again. Download and installyour printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Troubleshooting printer issues in OS X - Apple Support
    OS X: Printer and scanner software available for download - Apple Support
    Take care,
    Alex H.

  • About getting hp Laser Jet 1320 Printer Driver Softwear

    Dear Team Leader,
    I have lost my HP Laser Jet 1320 softwear CD. I want do download from Internet. Would you please help me by showing an easy way to get it?
    Yours Ever
    Mr_Shehub

    Hello Bholla,
    Welcome to the HP Support Forums!
    I understood that you have recently installed Windows 7 again, since the LaserJet 1022n will not install. If you are getting "turn printer on" messages when the printer is on, you have to check the USB connection between printer and computer.
    Have you tried to installed using the HP full feature software and drivers for this printer? If not it is a free download: HP LaserJet Full Feature Software and Driver.
    Let me know if that works any better for you
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Hp Color Laser Jet 5550dn Print Quality Issues

    Good Afternoon,
    I have a Hp Color Laser Jet 5550dn that has some print quality issue.  I've attached a black and white scan, but the color is a light blue to blue that form the blotches.  On the back of the page there are blue and pink streaks.  
    I can print more sample pages or print them in color, but anyone have any idea what could be going on here?

    We are encountering a similar problem. The streaking is coming fromt the Cyan cartridge and has continued for over a year now, despite numerous cartridge changes and replacing the transfrer case. It is progressively getting worse and I have yet to find a solution to this problem online. Any help or guidance would be appreciated.

  • How do I install a new Canon MG3500 series printer on my IMac?

    How do I install a new Canon MG 3500 series printer on my IMac? When I click on the cd rom icon I get a menu and I do not know what to do then.

    For 10.6 see > Mac 101: Printing (Mac OS X v10.6)
    For 10.8 see > OS X Mountain Lion: Set up a printer
    For 10.9 see > OS X Mavericks: Set up a printer

Maybe you are looking for

  • Problem with MIR6

    Dear Guys I have posted and parked an invoice but when I used the transaction MIR6 to display the invoices against particular document numbers, the line items are getting missed completely but some times half line items are displaying and some times

  • Aspect ratio isn't adapted after exporting/compressing

    Working with final cut express I usually export my projects (some of them 16:9, some of them 4:3, allways PAL) into an uncompressed QuickTime file; from this QT-file I then export/compress the file into whatever format I need it to be in, with target

  • How to setup cloud in ipad2?

    I am trying to configure cloud in ipad2. Can someone help me?

  • VDI 3.1 Big Endian vs Little Endian: VDI Cluster to Remote mysql server

    Hello, We are implementing a Dual Data center VDI environment and with that, will be using VCS to Cluster a remote Mysql instance. My question, if the VDI Cluster is on x86 (Little Endian), can the remote Mysql DB be on Sparc (Big Endian)? Thanks,

  • Banned from sitemap?

    can i be banned from my sitemap? when i autocreate one, it pulls tags from wordpress. words are only listed once and have links to the categories. i was just wondering if that is going to get a site banned form google?