How do i install mac os x 10.7

I want to download and install 10.7 but it is not in my App store anywhere?

Choose About this Mac from the Apple menu, check that the computer has a Core 2 Duo(not Core Duo) CPU and at least 2GB of RAM, phone the online Apple Store, and order a download code for it.
Allan Eckert: The computer listed in the original message is incapable of running Mountain Lion.
(85798)

Similar Messages

How do i install Mac OS X version 10.6.8 on my computer from Mac OS X 10.5 Leopard

how do i install Mac OS X version 10.6.8 on my computer from Mac OS X 10.5 Leopard

Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

How can I install Mac OS X Snow Leopard on Mac OS X Tiger?

Hello. Can someone tell me how I can install Mac OS X Snow Leopard on Mac OS X Tiger? I have the disk, but when I open the installer, I get a message saying that Snow Leopard could not be installed on my computer and it could only be installed on a Intel-Based Mac. This is a PowerPC Mac, so that makes sense.
So, I'm trying to ask how to make my Mac an Intel-Based Mac so I could install Snow Leopard. Or if I can't do that, I need to know how to install Snow Leopard some other way. Please help.

Just an FYI, the Mac App Store was introduced with Mac OS X 10.6.6. However the rest of what you say is accurate.
10.6.8 is required if you want to upgrade certain Macs beyond 10.7.5 without having to reformat the drive you are installing the operating system on and without having to install some version of 10.7 first.
One can actually install 10.7 or later if you maintain an original copy of the full installer of the operating system in question for your personal use without having to have the prerequisite operating system installed, if the hardware supported it. But that's a discussion for another forum.
For HFTaylor,
Consider buying a used or refurbished Mac with an Intel CPU depending on your needs. Read this tip about the migration of data from PowerPC to Intel before proceeding:
https://discussions.apple.com/docs/DOC-2295
and see this tip about used and refurbished Macs*:
http://www.macmaps.com/usedrefurbished.html
* Links to my pages may give me compensation.

How do i install mac os v10.5 on my i book g4 from the internet

how do i install mac os v10.5 on my i book g4 from the internet

You need to get a Mac OS X 10.5 DVD shipped to you or buy it from a physical store.
(58668)

HT1461 i have imac 11.2 os is windows7 how to i install mac os

i have imac 11.2 os is windows7 how to i install mac os
i intrest in mac os how to i install mac once again

likely all you need to do is to hold down the option key at startup and choose to boot into osx

How do I install Mac OS X on SSD?

Hello All,
I will be buying a Samsung 840 Pro Series Solid State Drive to instal into my Macbook (white) mid-2010. How do I instal Mac OS X onto the new SSD? Thanks for your help.

No, because the flash drive is a recovery system. Which is basically the 'Installer' for OS X, and so after you put in the New SSD, you boot to the flash drive (Boot holding down "option" and select the flash drive) and choose "Reinstall OS X" which will download (from Apple servers) and install OS X onto the drive you select. (You may need to use Disk Utility to format the drive to Mac OS Extended {Journaled} first)

How do I install Mac OS X Lion in my macbook?I already have it in appstore

How do I install Mac OS X Lion in my macbook?I already have it in appstore!

First off, dont call me guy. Now when you launch the app store, hold down the option key and click on purchased. You should see a dark grey button next to Lion that says install. Click install on the other mac. Make sure you are signing in with the same apple id that you purchased Lion with. That should do the trick.

How do i install mac os x on a previously owned macbook without their password?

how do i install mac os x on a previously owned macbook without their password?

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.

How do i install Mac OSX Leopard on other drive

how do i install Mac OSX Leopard on a drive other than my Snow Leopard computer? I need to access old files that will not open with new OS.

Simple. When you get the prompt to install Snow Leopard on your existing computer you will see a button that says "change destination disk..." or words to that effect.
You can select any mounted volume. If that volume already has a later version of OS X installed, you will need to erase it first using Disk Utility.

HT202796 how can i install mac os x 10.4 an a external hardrive

how can i install mac os x 10.4 an a external hardrive

Boot the Mac from the 10.4 installation disk, confirm with Disk Utility that the external drive is formatted as Mac OS X Extended (Journaled) with the appropriate partition type (GUID for an Intel Mac, Apple Partition Map for a PowerPC Mac), select the external hard drive as the disk on which to install, and install.
You posted in the Mac OS X 10.7 Lion forum, by the way. You'll usually get the quickest and most applicable responses if you ask in the forum for the product or service about which you're asking.
Regards.

How can i install Mac OS on toshiba intel celeron satellite L450-9P

can i install Mac OS on in Windows 7? for dual-boot purpose

But you can install Windows on a Mac via Bootcamp for dual boot.
For the purposes of Windows®, a Mac is just a generic piece of PC hardware, so installing on to it is permitted by Microsoft's EULA. On the other hand, Apple have explicitly stated in the EULA for OS X "Mountain Lion" that it should only be installed and run on Apple-branded hardware. Section 2, Paragraph B, Sub-section 1:
you are granted a limited, non-transferable, non-exclusive license […] to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software directly on each Apple-branded computer…
(emphasis mine)
Section 2, Paragraph H:
The grants set forth in this License do not permit you to, and you agree not to, install, use or run the Apple Software on any non-Apple-branded computer, or to enable others to do so.
Also, discussion of how to run OS X on non-Apple branded hardware is against these forums' Use Agreement, Section 2 Paragraph 8, including Sub-section 1:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
This thread'll be reported by someone if any salient advice is offered that enables the OP in his endeavour.

How can I install Mac Mini drivers for Windows 7 32-bit if I didn't install Windows 7 using bootcamp?

Hello. I have a mac-mini (mid 2010) and with bootcamp, was successfully running XP.
I then decided to upgraded to Windows 7 had lots of trouble installing it on my existing bootcamp partition.
I finally was able to install Windows 7, by just booting off the CD and letting it install that way.
But reading more on it, I think I was supposed to use Bootcamp to do it for me...
I had thought the Bootcamp Assistant was for only fresh installs of a Windows O.S. where no partitiion existed previously.
I had a partition so thought Bootcamp wasn't required for my needs.
But now, inside Windows 7, I have 0 drivers installed. I have an AirPort Express, so on the Mac side, I downloaded
and installed the Windows version of AirPort Utility and copied it to my USB stick. Then
I exported my settings to a text file on a USB Stick, then on Windows was able to successfully install AirPort Utility and import the settings.
But it still doesn't find my network. I am pretty sure I'm broadcasting my SSID...
So I need to know the following:
1) How to know I'm broadcasting my SSID - where do I find this in settings?
2) How I can install my mac-mini drivers on Windows 7 so I can use my existing wireless network, now that I've gone through the installation without using Bootcamp?
3) Do I need to set up network adapters and all that stuff in Windows 7 first? If so, how and what drivers do I need?
One other thing I tried was downloading Bootccamp 4.x and installing that on Windows 7 to see if it gives me the drivers that were supposed to be written to my USB stick if I had installed Windows 7 using Bootcamp in the first place... However I think the message it said was that it couldn't install as it was the wrong version. So I'm still stuck without drivers and therefore no internet.
And that is my main task - getting the Internet up and running in Windows 7.
Other Info:
I'm running Mac OS X 10.6.8 with 2 GB of memory.
I installed the 32-bit version of Windows 7 and I don't know what version of Bootcamp I'm running...
I can tell you that BootCamp Assistant is v3.0.4, but don't know if that means Bootcamp is also 3.0.4.
Hope you can help.
Thanks.

I tried something that worked for me...
Knowing that after my install of Windows 7 wasn't the correct method (didn't go through bootcamp), and the BootCamp 4.x package wouldn't install under windows 7, I tried reinstalling Bootcamp 4.x in Windows 7 to see what the exact message was it gave me. The message said it couldn't install because of a 32-bit O.S. vs a 64-bit version of the package.
So that got me thinging - my XP version was 32-bit, and so is my Windows 7 installation. So I tried installing the bootcamp that came with my Mac OS X installation CD. This is bootcamp version 3.1.
Not only did it install, but it practically took care of everything driver-wise for me. I was then able to see my wireless network, enter my password and I was connected. The only thing else I had to do to get on the Internet was bring IE8 online (guess it ships offline by default). Firewall and Antivirus are now installed, just a few more things to go.
That's one thing that's just not clear that I'll be sure to note for next time... The Bootcamp packages you download are actually driver packages for Windows. That is where the Windows drivers exists that are necessary to make your Windows 7 PC work on a bootcamp partition!
I didn't need the AirPoirt Utility at all (at least, I never went into it).
Thanks VikingOSX for your post. I will not need to follow the steps you provided, but they may help someone else as all of these bootcamp issues I've been reading seem to be very unique per installation.
Hopefully my solution helps others.

How do I Install Mac OS 10.4 "Tiger" via Firewire onto my computer

Ok so...I have a Titanium 15" Powerbook Laptop who's faulty CD Drive is being replaced with a Super Drive, as soo as I get the part in the mail.
In the meantime, I have connected my Powerbook to my roommate's G5 Desktop, successfully wiped my Powerbook hard drive clean (via firewire), in preparation to install Mac OS X 10.4.7 onto my Powerbook's hard drive (again via Firewire) and a startup instillation disk. This is where I get stuck. How is this done? Can anyone help?

To install via firewire start up the G5 from the install disk, then when at the installation screen boot the powerbook in target disk mode. Choose the powerbook from the list of disks to install 10.4 onto. Then just install the system. I am not sure if it will work from a G5, but it is worth a try.

Hi all, i want to know that how can i install mac os on my intel based Acer laptop?

hello all,
i have a acer laptop of intel processor,
now i want to install Mac Os on that acer laptop,
so tell me ,how can it be possible.
regards
zahid

But you can install any version of Windows or Linux legally on an Apple notebook. That has to do with license agreements. You can read all the license agreements for Apple's operating systems here:
http://www.apple.com/legal/
This tip explains how:
https://discussions.apple.com/docs/DOC-2741
It may be time to sell your Acer, and get an Apple instead.

How can you install Mac OS X Lion on a new, empty hard drive?

If the only way to install Mac OS X Lion is by downloading it via the Mac App Store, it's going to be very difficult to put it on a brand-new hard drive unless Apple provides us with workarounds,So what should we do when want to install Mac OSX Lion on new HD?
ThanQ

What you get from the Mac App Store will be an Installer Application. You will be able to transfer that Installer from Mac to Mac. I have not seen it yet, but we may also be able to burn an installer disk, we shall have to see just how things work.
Apple has always been known as an innovative company. And when they announce something new folks always go nuts with reasons that this cannot work. When Apple stopped making Macs with floppy drives and iMacs only had optical drives, people went crazy. Today no one makes computers with floppy drives.

How to re-install mac os x on macbook pro 2012

Hi Mac friends
anybody who can step by step explain how to reinstall a new MacBook Pro ( no installtions DVD )?
007 MacBook Pro

thanks I tried that the screen menu I get is to symbols of hard disk:
1) Machintos HD
2) Recovery HD
If I select the first one I have the orginal MacBook I set up 2 weeks ago
If I select recovery HD I get Mac OS X Utilities here I can select Install Mac OS X again, if I select that it takes 4 hours and I still have the same as when I installed it first time.
I will need to complet reinstall so I have a " new " Mac Book again

How do i install mac os x 10.7

Similar Messages

Maybe you are looking for