How do I install Quicken Delixe 2011 from a CD onto my HP Omni 10?

I just purchased an HP Omni 10 with Windows 8.1 and I want to install my Quicken 2011 Deluxe onto the HP tablet.  I have the Quicken Deluxe CD which I have copied onto a thumb drive.   Is Quicken 2011 Deluxe (which is installed on my Windows 7 computer compatible with Windows 8.1 and if it is, how do i install it onto the HP Omni 10?

Hello, kmlevin.
There are many editions of Quicken, and your version also pre-dates the Windows 8.1 Operating System by 2 ~ 3 years.  I believe that you will get the best advice on compatibility and System Requirements for your specific version from the Quicken website. The Quicken user forum could also be a good place to learn about challenges when using a 10" display and a touchscreen.
If you've managed to copy all the installer files to a USB flash drive, you will only need a micro-USB 2.0 Adapter to connect to your Omni's USB port. The one offered by HP Home Shopping is not fully compatible and will prevent attaching an external display at the same time as a USB device; here are 2 fully-compatible choices from reliable USA-based suppliers:
http://www.amazon.com/StarTech-com-5in-Micro-Host-Adapter/dp/B00B4GGW5Q/
http://www.amazon.com/SANOXY%C2%AE-Universal-Female-Adapter-Samsung/dp/B00I3J59FG
For additional information on connecting USB devices to your Omni 10, you may find the this forum discussion helpful...
       Re: Can I connect an external Optical drive to Omni 10 - ( ‎05-24-2014 02:26 AM )    
Hope this info helps; please return with additional details of your adventure, or with additional questions along the way.
Good luck!

Similar Messages

  • How do i install ms office 2011 on a 2012 macbook air

    How do I install MS Office 2011, bought the CD at Apple Store on a 2012 macbook air?

    stevejobsfan0123 wrote:
    You need a MacBook Air SuperDrive in order to read CDs. http://store.apple.com/us/product/MD564ZM/A
    This will work and not so pricy:
    http://www.frys.com/product/6280910

  • How can I install office mac 2011 on my iMac G5 without intel???

    How can I install office mac 2011 on my iMac G5, it says I need intel??? thanks

    You can still get Office 2008, the last version that had PPC Mac code:
       Office Mac 2008 Retail for 3 Users  For Apple PowerPC G3/G4/G5 & Intel Macs!  Only $89.99  Save $60       

  • How can i install ios 8 downloaded from another source through flash drive?

    how can i install ios 8 downloaded from another source through flash drive?

    You can not download from a flash drive.  You can do over the air, or you can connect your iPhone to your computer and download iOS 8.1 via iTunes.

  • How do I copy final cut express from my computer onto a laptop

    How do I copy final cut express from my computer onto a laptop?

    You don't.  Several of the system level components won't be installed properly if you copy or 'migrate' to a new computer.  You'll need to install from the original install discs.
    -DH

  • I've installed Photoshop Elements 12 from a CD onto my PC laptop. I'm thinking about buying a tablet, so was wondering if (a) can I install on a 2nd device (b) can I use the serial number online as I won't beable to install from a CD, and (c) will I beabl

    I've installed Photoshop Elements 12 from a CD onto my PC laptop. I'm thinking about buying a tablet, so was wondering if (a) can I install on a 2nd device (b) can I use the serial number online as I won't beable to install from a CD, and (c) will I beable to choose a mac, after the initial was on a PC???? Thanks Martin

    A single user license allows for having activated installations on two machines. An Elements license allows for either platform in many cases (recently not the case from what I've seen).  If you have the disc, see if it contains the Mac installation files... if it does then you should be able to install them via a download as well.  I cannot answer with certainty for the last question since it relies on the previous question.  Personally, I would not let an inexpensive piece of software dictate an expensive hardware purchase decision.

  • How do I get a .pdf document from my PC onto my ipadmini?

    How do I get a .pdf document from my PC onto my ipadmini?

    1. Email to your iPad Mini
    2. File Sharing in iTune
    3. Upload PDF to the cloud and share with computer and iDevice e.g. Dropbox

  • HT201317 Not all of my photos on my iphone are showing up on the stream on my computer.  How do I get all the photos from my iphone onto my photo stream on my PC?

    Not all of my photos on my iphone are showing up on the stream on my computer.  How do I get all the photos from my iphone onto my photo stream on my PC?

    Use a third-party utility such as Phone to Mac - Pod to Mac.

  • How do I install a single app from the Install Discs?

    I've got my set of Install Discs and would like to either make a back up of a single application from it or at least see the contents as individual items within the disc. I know there's an utility out there that allows this, but I didn't capture where I read about it.
    Trying to ensure I don't lose my iMovie 6 HD!
    Appreciate any help.
    Thanks!

    Here's what I got:
    -I was able to extract the application (very easy to navigate right to it)
    -It created a folder called "iMovieHD.mpkg Folder"
    -In the folder is the "iMovie Folder" and "iMovieThemes_Tiger Folder"
    -And so on ... until you get to the actual application (.app) and Library, et al
    I think my last question is, now that I have the component back up of my iMovie, how would I use this in the future. That is to say, how would I install this on my next computer?
    Thanks again!
    km

  • How do I install the Leopard OS from a clone backup?

    I just bought a WD 160GB My Passport Essential (USB) external hard drive.
    My goal is to partition the external hard drive so it holds the following:
    1. clone of the Leopard OS disks
    2. Leopard OS installed from the clone
    3. Time Machine backups
    I formatted the external hard drive to a HFS extended (journaled) format and created 3 partitions, each as a GUID disk.
    My Macbook is intel based and came with 2 Leopard OS install disks (Macbook OS X Install Disk 1 and Macbook OS X Install Disk 2).
    I was able to create a clone of the 2 install disks and restored both images onto the external hard drive partition I named "Leopard OS Disk Clone."
    I rebooted my back so it boot from the "Leopard OS Disk Clone" partition located on my external hard drive, to test the clone out. I clicked on the "Install Mac OS and Bundled Software" file on the "Leopard OS Disk Clone" partition and started to install the OS on the "Leopard OS" partition on the external hard drive.
    During the installation a message appeared instructing me to put the Mac OS Install Disk 2 into the mac.
    My problem is Install Disk 2 is on the "Leopard OS Disk Clone" partition and there is no way to tell the installer program the location of disk 2.
    How do I install the Leopard OS on my external hard drive partition if both Install Disk 1 and Install Disk 2 are on my "Leopard OS Disk Clone" partition?
    Thanks in advance for your help!

    I'm no expert, but I don't think you can do that.
    Everything I've done (not a whole lot) and read here says you make a bootable clone from a running system (usually your internal HD).
    You can then boot directly from the clone, either by changing the Startup Disk in System Preferences, or by holding a particular key (I forget which one just now) while powering-up, to get the option of booting from any connected bootable volume found.
    Hopefully one of the experts will confirm or deny (I'd like to know for sure, too!).

  • How do i install os 10.7 from usb in recovery mode

    The os that is on my old macbook is corrupted and I need to install a new version purchased from the apple website that delivers it via email.  Once I have transferred it to a storage device, how do I install it via usb or disk?

    The only thing you get in the email is a redemption code that allows you to download Lion through your App Store account. Can you boot your Mac normally long enough to download Lion?
    If so, once you have the full Lion installer, you can use any 8 GB flash drive to create a bootable installer with DiskMaker X.

  • TA23231 how do I install iWork when received from Apple Store

    How do i install iWork from the receipt for the order.  I tried to find answers on the web, but it seems no-one else has my problem!!

    Open the App Store and sign in with your Apple ID. Click on the Purchases icon in the toolbar. You should be able to freely download the three iWork apps.

  • How do I install a plug in from another developer?

    I downloaded social_monkee_plugin.xpi from internet. How do I install in Firefox?

    To install an .xpi file, in the File menu select "Open File", and then open the .xpi file.

  • How to uncheck "install new versions automatically" from INTERNET EXPLORER 11 from SCCM 2012

    We have deployed "Internet Explorer 11" application  through SCCM 2012 console .the deployed application was customized using "Internet Explorer customization wizard 11" tool.
    issue:
    we are getting  "install new versions automatically" check box as checked
    when we see from help about  "about internet Explorer"
    seeking solution:
    how to uncheck "install new versions automatically" check box from SCCM 2012 console.
    please let me know if we have any solution for this instant
    thanks,
    Gc.Hanumareddy

    Hi,
    For option: "install new versions automatically", we can simply prevent it via GPO or registry (the registry entry can also be deployed via GPO)
    Computer Configuration - Administrative Templates - Windows Components - Internet Explorer - Install new versions of Internet Explorer automatically
    Or
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main]    
    "EnableAutoUpgrade"=dword:00000000
    Yolanda Zhu
    TechNet Community Support

  • How can we install the Java Plugin from the html page

    Hi,
    I am using java plugin 1.3.1_02 for my applet pages.
    How can I install that plugin in the client machine without installing manually.
    I used,
    <OBJECT classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
    width="600" height="400" align="middle"
         codebase="http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,1,2">
    <PARAM NAME="code" VALUE="SignedAppletDemo.class">
    <PARAM NAME="archive" VALUE="SSignedApplet.jar">
    <PARAM NAME="type" VALUE="application/x-java-applet;version=1.3">
    </OBJECT>
    But it is downloading java plugin 1.3.1_03.
    Can anybody help me
    Thanks & Regards
    Raja

    Using object tags is the correct way and only way to download the plugin and let the client decide whether he can download it r not. There is no way to install automatically
    I dont think there is a way to install automatically without a user intervention coz, it can open the floodgates for potential hackers.
    Can u cite an example about which programs can be installed automatically and why do u want the plugin to be installed automatically?
    ciao

Maybe you are looking for

  • OIM 9.1.0.2 - Note field issues

    Hi Gurus, IHAC who has got a strange behavior in OIM for a custom connector ( there are a lot of resource using it). After request is concluded, if customer goes to User Detail --> Resource Profile and select the resource that was requested, he find

  • Zero DC balance

    We have post five accounting documents, some are using MYR document currencies, some are using SGD document currencies, company code currency is SGD, when we use SGD to clear five documents, FBL3N line item report shows local currencies for that acco

  • Download XML structure to Application server

    Hi all. I am generating an XML structure based on some data that I select from HR e-Recruiting, and I need to save the generated XML file on the application server, not the presentation server (local computer). Most of the code I have found on SDN (c

  • Help required in Background Job

    Hi Experts, My client is scheduling background job for creating Cost Document. The job creates cost document and PO simultaneously. The requirement is, i need to change the validity start and end date of the PO with the price date of the cost doc. I

  • DDL for DBMS_SCHEDULER job

    How do I generate the DDL for an existing DBMS_SCHEDULER job? I've tried using DBMS_METADATA.GET_DDL, but that doesn't seem to work with the scheduler jobs.