How do i install snow leopard on a internal hard drive that was formatted for windows 7 in a i mac with out taking hard drive out im stuck on apple screen with start up disk in drive

 

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer.  Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the  "C" key.  Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.)  Click on the Partition tab in the DU main window.  Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer.  Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X.  You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
  2. Restart the computer.
  3. Immediately after the chime press and hold down the "C" key.
  4. Release the key when the spinning gear below the dark gray Apple
      logo appears.
  5. Wait for installer to finish loading.

Similar Messages

  • I cannot create a folder on USB flash driver that was format in Windows

    I have a USB flash drive that was format and use for my Windows PC.
    When I used the USB flash drive on my Macbook, I can read the file but cannot create folder.
    Is that the IOS restriction?
    Thanks for replying.

    Click on the drive, choose Get Info from the File menu, and check the format.
    If it's formatted as NTFS, reformat it as MS-DOS, exFAT, or Mac OS Extended (Journaled) as desired.
    If it's formatted as FAT32 or exFAT, use the Disk Utility's Repair Disk command on it.
    (82812)

  • How do I install snow leopard on a 2.1 ghz macbook with 10.5.8 Leopard installed?  I have a 10.6.2 unstall disk.  It says it can't install snow leopard on this computer.

    How do I install Snow Leopard on my Macbook 2.1 ghz, with 10.5.8 Leopard installed?
    I have the install disk for Snow Leopard 10.6.2, but when using it for installation, it
    states that "Snow Leopard cannot be installed on this computer"!
    I understand some features of iOS5 cannot be used unless my iMac and Macbook have
    10.7 Lion installed.  Correct?

    It sounds like your Snow Leopard install disk is the disk that came with another model of Mac (grey lable with no pictures). If so, that's not legal and won't work. You need a retail (white label with the picture of a snow leopard) copy of the installer for each system that didn't come with Snow Leopard.
    Regards.

  • How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

    How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

    Hi.
    You simply can't. Snow Leopard is compiled in Intel binary only.
    Good Luck.

  • Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger?

    Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger? Or How can I prevent my mac from freezing?

    McHagihara wrote:
    Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger? Or How can I prevent my mac from freezing?
    When you installed Snow Leopard, Tiger was replaced, leaving your programs and files intact.
    What is causing your freezing problem is unknown, you can take Kappy's advice and remove everything, but you lose your files and free iLife programs that came with Tiger/new machine.
    The 10.6.3 disk you "upgraded" with has the full 10.6.3 on it, but no free iLife suit, so a erase and install will remove what you already have installed.
    You can try to locate your problem without the erase and install method by running through this list of fixes.
    Step by Step to fix your Mac
    But before you do anything, backup your personal data off the machine to a extenal drive and disconnect.
    Most commonly used backup methods
    Because if you have to follow Kappy's advice and wipe and install 10.6 fresh, it will cure your problem in nearly 99% of cases, but you have to rebuild everything. All programs and files.
    How to erase and install Snow Leopard 10.6
    If this is all too much for you, then STOP and call a local PC/Mac service or competant friend to assist you.
    Yuo might need to install more RAM into the machine to make 10.6 run better as well.

  • How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

    How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

    I'm assuming your dvd drive is broken? if you have a thumb drive large enough (8GB or better), you can use another computer to make a bootable image from the install dvd to the thumb drive. then you can install from the the thumb drive.
    Ihttp://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    that's a step by step walkthrough.

  • How can i install snow leopard together with lion, on a Lion based MacBook Pro ultimo 2011

    Hi
    How can I install Snow Leopard on a Lion Based MacBook Pro ultimo 2001. I will both have installed Snow Leopard and Lion on my computer, but how can i do that?
    I have purchaded Snow Leopard, but I can installed it
    Pls can anyone help me
    Best regards and merry christmas
    Robert

    Apple figures that having supported PowerPC code for the last 6 years is enough so they dropped it.
    Why should they have to support some that old forever? It doesn't make good business sense to support some that so few will use.
    If you must play those games, my suggestion is to get an older Mac that will support PowerPC. It is going to be a difficult task to get Snow Leopard to run on a new Mac.
    Allan

  • I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

    I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc.  But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

    You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
    http://www.macupdate.com/app/mac/24481/ntfs-3g
    If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

  • HT2963 I have a 1 TG external drive that is formatted to Windows NTFS and is read only, how do i get it to read and write on my Mac OS X 10.6.3?

    I I have a 1 TG external drive that is formatted to Windows NTFS and is read only, how do i get it to read and write on my Mac OS X 10.6.3?

    Install software such as Paragon NTFS, or reformat it as Mac OS Extended (Journaled) or FAT32. Mac OS X 10.6.5 and newer can also read and write exFAT partitions.
    (97498)

  • How do I import music from a flash drive that was formatted with a windows PC to my MacBook?

    How do I import music from a flash drive that was formatted with a windows PC to my MacBook - the drive is showing it has over 3GB of info on it but none of the files are showing up in finder?  I had backed up my iTunes library on the flash drive about a year and a half ago before I switched from a dell to a MacBook pro.

    What I found works for me is to make sure iTunes keeps the music files organzied in the iTunes Media folder according to album, artists, etc. and that it copies the music files there when adding them to the library.  That way, if something happens to the library, the raw files can always be re-imported again.

  • How do I install Snow Leopard while keeping files, applications, and settings

    I need to update my system, I realized that I need Snow Leopard (quiet late) before Maverick. My question is, how can I install it keeping files and all the data. I found this on Internet, does it work?
    Install Snow Leopard while keeping files, applications, and settings
    If you follow these steps, the installer will replace your operating system if one is already present, but will preserve your account information and personal files.  You may have to reinstall some applications, however.
    Insert the install disc (or the first install disc if you have more than one) into your disc drive. Restart your computer while holding down the c key. This causes your computer to start up from the install disc rather than your hard drive. When you see the gray Apple insignia, release c . 
    The Mac OS X installer should open automatically. Follow the on-screen prompts to read and accept the license agreement and begin the installation. When prompted to choose a destination disk, select your preferred location and click Install. 
    When the Mac OS X installation finishes with the disc, restart your computer. After the installation completes, a configuration program may begin automatically if you are installing for the first time. You will need to supply basic setup information for your computer. 
    Update your system software to ensure that you have the most recent operating system components.  From the Apple menu, select Software Update... , and then follow the instructions on the screen. Often, you will have to restart your computer, and you may have to run Software Update multiple times before it can completely update your system.

    That's why you need to back it up. You won't need to restore the backup immediately afterwards unless something goes wrong during the upgrade, but you'll need it later; the drive will eventually fail.
    (105428)

  • How do I install Snow Leopard using another computer?

    My 2009 MacBook meets all the criteria for the Snow Leopard upgrade, but my dvd drive is broken. Every time insert the dvd it is spit out (it is the same for audio cd's as well). I have tried repairing the drive and installing snow leopard using an external dvd drive (with no luck). I need a simple guide for using another computer to do the upgrade. My boyfriend has a newer MacBook Pro and I believe is operating on Lion. I want to use his computer to upgrade mine, is it possible eventhough we are on different operating systems?

    How to use and troubleshoot FireWire target disk mode

  • How do I install Snow Leopard over 10.5.8

    I have just recently acquired a MacBookPro from a friend of mine who's father has passed away. I am able to access the computer without a password but the admin is still set to his father and he doesn't know the password. I have the Snow Leopard OS and want to do a clean install like it came from the factory with no personalization. This is the first time I have owned a MacBookPro so I am unsure how to do a clean install of Snow Leopard over the exiting OS 10.5.8 and if I have to delete that OS first. How do I do that?

    Insert a retail DVD, restart with the C key held down, use the Disk Utility to erase the internal drive, and install Snow Leopard.
    While the retail DVD can be used to create a fully functional OS, it can’t perform a true factory restore; it won’t install any of the iLife applications.
    (111513)

  • How Best To Install Snow Leopard For A Non-Techy?

    What is the best route to go down to install Snow Leopard please? I received my copy on Saturday but I'm apprehensive at installing it!
    When I installed Leopard I ended up with a lot of problems, some of which are still not resolved, such as the non-recognition of log-in passwords etc. I still have to provide a password when switching back and forth between users and in order to close down I have to log out all users individually!
    As a keen Mac-user (but by no means a technical expert) I would like my Snow Leopard experience to be as painless as possible, so how best to install it please and at the same time eliminate my old Leopard problems outlined above?
    Message was edited by: Julian Brown

    Julian Brown wrote:
    As a keen Mac-user (but by no means a technical expert) I would like my Snow Leopard experience to be as painless as possible, so how best to install it please and at the same time eliminate my old Leopard problems outlined above?
    For the most painless upgrade possible, I suggest you just follow the instructions under the heading "Upgrading Mac OS X" in the Snow Leopard Installation Instructions document.
    As a precaution, you may want to run Disk Utility's "Repair Disk" step first. You can also run the "Repair Permissions" step if you want but I doubt that is necessary.
    Your 'old problems' aren't problems, AFAIK. You must always provide a password to change accounts & all accounts must be logged out to shut down or restart the computer. These steps insure the privacy of each user's account & make sure each user has a chance to save any open documents before the computer shuts down. IOW, they are desirable features, not problems!

  • How do I install Snow Leopard as a partition with Yosemite on a 2001 Mac Mini?

    I have owned Mac's on and off since the 80's.  I currently own (myself and my kids) a 2008 MBP, iPhone 4 and 4s, 2 old iPhone 3's, just purchased a 2011 Mac Mini and iPhone 6, and my work-from-home computer is a 4 month old MBP.
    Several years ago, I upgraded the 2008 MBP to Mountain Lion.  Then the one and only game that I have played since around 2001, Star Wars Galactic Battlegrounds, wouldn't work on Mountain Lion so I successfully added a 50GB partition and reinstalled Snow Leopard and the game has worked great ever since.
    Recently, I gave my son that 2008 MBP, so I purchased the Mac Mini (i5 dual, 8GB memory, 750 HDD) and immediately upgraded it to Yosemite.  I proceeded to carve out a 50GB partition and have tried several times to install Snow Leopard to no avail. 
    After creating the 50GB partition, I rebooted, and held down the option key so I could then have the option install the Snow Leopard onto that 50GB partition - but it just keeps freezes up on me.  I even went so far as to try to copy the 50GB off the 2008 MBP onto the Mac Mini and that (understandably) didn't work either.
    While I know enough to cause trouble, I am completely flummoxed with this.  I've run many searches and haven't been able to find a solution.
    Can someone please walk me through the steps to make this work?  When I do restart, I don't even see that 50GB drive like I do when I restart the 2008 MBP so I suspect something may be wrong from the get go.  In Disk Utility, it shows the 2 partitions just fine, but not on reboot/restart with the option key held down.
    Thanks in advance for your help.

    Thanks very much for the quick reply.  I figured it would something that simple.  Like I said, I only know enough to cause trouble.  LOL
    Thanks again,  Guess I need to find a new game to play.  LOL

Maybe you are looking for