How do i install tiger on external drive?

ola, i have 2 dead 17" flatscreen (swivelhead) ppc imacs, i'm desperately want to resurrect one of them, having replaced the power supply (no thanks to apple and foxconn?) and it also has a faulty logic board (no thanks to apple?).... someone in cape town south africa, apparently can do component level repairs...... i have to ready the imac with an up to date 10.4 (tiger) OS from my mac pro running snow leopard.....
how do i-
1. install 10.4 onto an external drive and if possible
2. update leopard on the external drive before i put it back into the faulty imac?
thx
francois

Installing Tiger on a drive means restarting the master computer (MacPro) using the Tiger install disk. Since MacPro uses the Intel chip, I don't believe you will be able to restart that computer with the Tiger disk. If you can attach an external drive (using firewire) to a PowerPC computer, I suggest you use the Tiger install disk on the external drive to install 10.4. I would then attach it to the "dead" iMac (using firewire) and try and restart the computer while holding down the option key. Click on the external drive and see if the computer starts up. If it does, you probably have a corrupted operating system on your iMac. At this point you can try either to run DiskWarrior on the iMac or just use the Tiger install disk to replace the old system in the iMac (or reformat the drive and start fresh). Hope this helps.
JDB

Similar Messages

  • How can I install Tiger on external drive

    I have a maxtor external drive and I am trying to install tiger onto it but it is not installing properly. I have a imac g5 and I have the drive connected to it. It allows me to perform the install but then when I use it as the boot disk it goes through all the process and it goes to unix with panic...something about hanging here.
    Thanks
    imac G5   Mac OS X (10.4.4)  

    Hi Harrison,
    is this a firewire drive? Be aware that you cannot boot from a USB drive: Don't start up from an external USB device.
    Also make sure your drive's firmware is up to date.

  • How do I install Tiger without DVD drive?

    How do I install Tiger without DVD drive on a Powerbook?
    My Powerbook had some problems recently, the HDD and the Superdrive where gone. I replaced the HD but can not get Tiger installed here because the DVD drive isn't working. I boot right now from a FW HD. Any Ideas how to install the OS on the internal drive?
    Any ideas would be apreciated.

    See Option 2 in
    <http://docs.info.apple.com/article.html?artnum=304129> or Option 1 in
    <http://docs.info.apple.com/article.html?artnum=303028>
    It has worked for at least one person:
    "Kenichi Watanabe
    Posts: 853
    Registered: 2-Sep-2003
    Re: Using DVD drive in iMac G4 for iMac G3 in Target Disk Mode-->won't read DVD
    Posted: 26-Oct-2006 4:37 PM in response to: AJ Nealey
    Reply Email
    I just tried it between a Power Mac G5 and a PowerBook G3 (Pismo) and it worked. The G5 was Mac in Firewire Target Disk Mode. I started the G5 with the T with no DVD in the drive. I started up the G3, and the G5's hard drive appeared on the G3's desktop. I pushed the eject key (on the G5 keyboard) and the SuperDrive opened. I put in a DVD (the Tiger installation disk) and closed the SuperDrive. The DVD appeared on the G3's desktop. I restarted the G3 with the Option key held down, and the DVD in the G5 appeared as a valid startup choice."

  • Can I install Tiger on external drive, inside a folder?

    Hi
    I know I can install Tiger (iMac G5 version) on an external HD - I've already done it. However, I'd now like to install onto a different eHD where there is a lot more space.
    Can I set up a folder (e.g. called "My Tiger") and install into that? And will it find & boot from it if I hold down the Option key when I switch on my iMac? Or must an install be done into the root directory only?
    If you're wondering why I need this - Photoshop won't run in Leopard on the iMac, but it will run from an eHD running Tiger.

    Does that mean I could have Tiger installed into a separate partition on my INTERNAL drive?
    Yes.
    And would it mean I could access all my files and run software from the main Leopard partition (obviously, not Mail or system utilities)?
    Yes, except for software which requires system components; this typically consists of software which came with an installer.
    (56123)

  • Can I install Tiger on external drive with OS9 on internal?

    I bought and plan to install OS X 10.4.3, but will continue to use OS 9.2.2 about 95% of the time because I can't afford to update all 3rd-party software at this time, so I want to start up in 9.2.2 usually. Can I install 10.4.3 on a partition of my external HD with firewire and leave 9.2.2 on my internal HD, then pick a start-up OS by a key combination or such? How should I do it, and what problems might I encounter? To partition my external HD should I use OS 9.2.2, the original 9.0 CD, or the new 10.4.3 DVD?
    I have a Power Mac G4 (AGB Graphics) with an internal 10 GB HD and an almost-empty external 120 GB firewire HD (Iomega). Thanks.

    Welcome to Apple Discussions!
    Yes you can do that, though I'm not too sure that Iomega's firmware is up to date to do it. Be sure that any data you have on the Iomega is backed up elsewhere before attempting it. Some Firewire drives without up to date firmware from the manufacturer may become invisible and unusable after a software update on Mac OS X 10.3 or later. Also an AGP PowerMac needs its firmware updated while booted from Mac OS 9 before installing Mac OS X 10.2 or later:
    http://docs.info.apple.com/article.html?artnum=86117
    That said, if after testing you find it does work, you can switch booting between both drives using the Option key booting as described in the Startup Manager article:
    http://docs.info.apple.com/article.html?artnum=106178
    Leave OS 9.2.2 on your internal, and 10.4 on your external. That will be a lot easier than partitioning. Some information I wrote for others which can help you on your migration to Mac OS X is provided in this link below:
    http://www.macmaps.com/macosxnative.html
    If you really want to partition, be aware that only third party software is available to partition without erasing the entire drive, and you'll want to make sure additional partitions that will boot Mac OS 9 have Mac OS 9 drivers installed as my link above states. Whatever you do, be sure you have at least two copies of your data at all times:
    http://www.macmaps.com/backup.html
    Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

  • How can I force Time Machine to make a complete backup of my Hard Drive.  I just installed a new external drive for Backup since my previous one failed.  Now when I back up, Time Machine only backs up my data folder and the Users folder.

    How can I force Time Machine to make a complete backup of my Hard Drive.  I just installed a new external drive for Backup since my previous one failed.  Now when I back up, Time Machine only backs up my data folder and the Users folder.
    When I start a backup. Time Machine says "Oldest Backup: None; Latest Backup: None", so it seems like it should do a complete backup, but it only does a partial. 

    Hi I'd like to jump in here. Your app showed me this:
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 749.3 GB Disk used: 453.81 GB
              Destinations:
                        Plastic Wrapper [Local] (Last used)
                        Total size: 999.86 GB
                        Total number of backups: 64
                        Oldest backup: 2013-07-24 23:25:11 +0000
                        Last backup: 2013-11-17 01:40:47 +0000
                        Size of backup disk: Too small
                                  Backup size 999.86 GB < (Disk used 453.81 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
              /sbin excluded from backup!
              /usr excluded from backup!
              /System excluded from backup!
              /bin excluded from backup!
              /private excluded from backup!
              /Library excluded from backup!
              /Applications excluded from backup!
    Aside from the size of my backup drive, which I will increase at some point, I'd really like to have time machine backing up all system folders, especially Applications. How to I reset this hidden exclusions?
    Thanks,
    Darcy

  • I lost all personal data while installing maverick in external drive. How can I recover lost data?

    I lost all personal data while installing maverick in external drive. How can I recover lost data?

    If all your files are missing
    You may have logged in as a different user, such as Guest. Open the Users & Groups pane in System Preferences. Your name should be at the top of the user list, under Current User. See also this support article.   
    If files are missing from one folder
    Change the Finder view mode; for example, from icon view to list view, or vice versa.

  • How do install  program from external drive to mac book air

    how do install  program from external drive to mac book air

    DVD or CD sharing: Using Remote Disc - Apple Support

  • How to upgrade OS on an External Drive?

    I have downloaded Lion to my iMac.
    All seems well. Glad I had a Track Pad, The lion was well hidden.
    I keep TT Pro and DW on an external drive on which I installed a Mac OS as a "carrier" some years back.
    I have updated/upgraded it as new OSs came along.
    Overkill, perhaps, but I felt happier than with an e-drive.
    This new method of upgrade has left me a bit flummuxed re upgrading the external drive.
    I understand that I have 5 "lives" for my initial sub.
    Perhaps I could be pointed in the right direction.
    It may very well be that I do not need to upgrade that EHD at all, but doing so has served me well up to now.
    Early days and no panic for this but any suggestion would be appreciated.
    Thank you.

    If you boot from the external drive and have the latest Snow Leopard update you should have no problems signing in to the Mac App Store. You will be able to redownload the Lion update there.
    You could also create a boot disk if need be and select to install to your external drive.
    http://modmyi.com/content/4583-how-make-os-x-lion-boot-disk.html

  • How do I boot from an external drive?

    I've just Carbon Cloned my 60GB drive to a firewire external drive. I'm about to replace the 60GB with a 160GB drive and the CCC instructions say boot from the external drive I'd just created once the new disk is installed. Then CCC the cloned drive back to the new hard drive.
    So, how do I boot from an external drive? Do I have load anything to the new drive? Will the macbook detect the external drive and boot from that? Or what??????
    Thanks
    Dick

    Thanks DWB. Being the rash impetuous guy I am I didn't wait for replies and just switched on the macbook after installing the new disk (which was so easy it was unbelievable - had to go and buy a a little torx bit though) to see what would happen.
    Blow me down with a feather if it didn't just boot off the external drive all by itself :-O It did come up with the disk was unverified and I could see it in FINDER and I was prseented with a screen to ERASE/RESTORE etc.
    When I went to CCC the external drive back to the new hard drive it didn't give show me the new hard drive so I guessed I'd have to do something to format (?) the hard drive.
    I don't know if I did the right thing but I went to disk utilities and chose ERASE in the vague hope it would maybe format the disk in some way.
    Seems to work now and the CCC replaced the system perfectly as far as I can see.
    Basically very impressive all round. Piece of proverbial to replace the disk and CCC made life so easy.
    Thanks again.
    Cheers
    Dick

  • Can you install Tiger onto a drive with data?

    Hello,
    I would like to ask if you can install Tiger onto a hard drive that already has data files on it. I have a 250 GIG hard drive and it already has 10 GIGs of data on it. Can I install Tiger on this drive or might it corrupt my files?
    Its a long story but here is a quick summary of why I am attempting to do this:
    I have a 350 MHz Blue and white G3 (rev 1) with two hard drives: the original 12 GIG ATA drive and a 250 GIG SATA drive (internal) connected with a 1S2 Seritek SATA controller.
    My 250 GIG drive has two partitions but only one is available to Tiger. You see, by accident I originally formatted my 250 GIG drive with an extremely small partion (32 Megs). I meant to type "30 GIGs" and by accident I typed "30 Megs". Oops That was supposed to be my OSX 10.4 volume. Its too late now - its too small. So I only have two choices for a place for TIger: my 12 GIG drive or the other partition of my 250 GIG drive. I am reluctant to choose my 12 GIG drive because it already has an older OS on it (OS 8.6).
    I was concerned about installing TIger on the data partition of the 250 GIG drive because that is where all my valuable data files are - 10 Gigs of data. I don't want to risk scrambling this data in any way.
    Is it safe to install Tiger onto this partition with my data files? Or is the possibility it might do something to my data.
    Its only a temporary install so that I could burn my 10 GIGs of data files to DVD for backup and then I will start all over again and erase the entire hard drive and reinstall from scratch onto the 250 GIG drive once my data files are safely backed up. (I will not partition the 250 GIG drive i nthe final install - it will be one big partition.)
    One other question:
    When you format a disk in Tiger are there options to "low level format" or "zero all data" or will just a straight "erase" do the job sufficiently? I bought my 250 GIG Hitachi SATA drive new and so I am not sure if it worth the time to re-erase it with "zero all data" (if that is an option in the Tiger Disk Utility). What is the best formatting option to prepare this drive in the most beneficial for Tiger?
    Thanks for any suggestions.

    Thanks scb and Jeff,
    Jeff, you have me thinking now. I think I will be safe and try another idea. I have a 4 GIG internal SCSI drive I could use to backup my data in 4 GIG sections at a time via my Adaptec 2430 SCSI card. I could then move this hard drive over to my other G3 onto its 40 GIG hard drive. This would be done three times to take off all my data and essentially provide a backup before I install Tiger. Good idea. You are right. It is better to play it safe.
    By the way 8.6 can handle HFS+. And yes, I should eventually buy an external drive solution - probably an enclosure. I saw one called "coolmax" [1]. It could hold a SATA drive and it had USB, firewire and also an external SATA port.
    And also Jef thanks for the info about formatting drives. I am glad to hear it is not important to zero all data if you don't have to. I am not concerned about havig anything to hide and so yes, I will just click "format" - that should be fine. Zero all data takes such a long time and I would rather avoid using it if I don't need this feature. Thanks for the advice.
    Thanks for the new safer direction.
    [1] Coolmax (CD-311-SATA Combo)
    Coolmax Aluminum USB 2.0 External Case/Enclosure for 3.5" SATA/IDE Hard Drives, USB2.0, IEEE1394a, Serial ATA triple interface input CD-311-SATA Combo
    http://www.iocombo.com/product/showproduct.php?productid=0EGD&PHPSESSID=3c41735b f27252cf17a17350cb603e0e
    $69.95
    http://store.yahoo.com/directron/35enclosure.html
    $53.99 at directron

  • Installing Leopard on external drive / then making it internal

    Hi There-
    Please tell me if you think this scenario will work. I'm running out of room on my mac mini's hard drive, so I bought a new drive along with Leopard. I want to install leopard on the new drive in an external firewire cage and set everything up. Then when I'm satisfied, I can crack the mini open, pull out the internal drive with a working tiger install, put the external drive in (with leopard) and just let it boot.
    Is it that easy?

    Yes that will work.

  • How do i install reader to a drive other than the boot drive?

    how do i install reader to a drive other than the boot drive?

    Hi nicksdaddy,
    There is an offline version:
    http://get.adobe.com/reader/enterprise/
    Hope that helps!
    Stacy

  • How do I install a pdf printer driver on my window computer using create pdf

         How do I install a pdf printer driver on my window computer using create pdf

    http://helpx.adobe.com/acrobat-com/kb/using-createpdf.html#main_adobePDF_desktop_printer

  • Installed Lion on external drive per apple support, now won't install on Mac HD, because can't create recovery disc, does not give option besides restart to old OS

    On the noecovery page I followed instructions to install Lion of external drive, which I did. Then tried to install on HD, but got same message as no recovery disc could be made and only option was to restart to back Leopard. Don't want to take to geniuses since there must be a simple answer.

    On the noecovery page I followed instructions to install Lion of external drive, which I did. Then tried to install on HD, but got same message as no recovery disc could be made and only option was to restart to back Leopard. Don't want to take to geniuses since there must be a simple answer.

Maybe you are looking for

  • Quicktime files not playing in browser

    Please help... I have now started publishing my website to my domain name instead of mobile me and the quicktime movies embedded on the pages no longer play. Instead there is just a quicktime symbol with a question mark. Why and how can I fix it? Get

  • Screen resolution with Mode in BDC

    Hi All, In call transaction statement I am using mode as well as options from statement but 1 error is coming that i can't use mode and update with options from statement. But I want to run in background as mode 'N' as well as I want the default scre

  • IPhoto 6 download - .MAC users

    Am I wrong in understanding that .MAC users are able to update iPhoto 6 for free? I am able to download the file but get the error message: You cannot install iPhoto Update 6.0.2 on this volume. An eligeble iPhoto application was not found in the loc

  • Looking for other Apps DBAs Running on Windows

    I am looking to for Oracle Apps DBAs how are running Oracle Apps on a Microsoft windows platform to chat with and compaire notes.

  • Dynamically Obtaining Username and Password

    Hi, I am using Oracle Application Server and implementing a Servlet in it. The issue I am having is , how do I dynamically get the username and password to connect to the database? Should I use a configuration file and hard code it? Is there any spec