How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

Similar Messages

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
-I have a flashdrive with win7 on it.
-I mounted the ISO of win7 with toast for bootcamp to do its thing.

Good luck.
Consider this a bump so that hopefully someone with better news spots your thread.
Allan

How can i install windows games in my macbook pro

I m a game lover but since i've macbook pro,i haven't played any game on my macbook...so guys please tell me how can i install windows games to my macbook pro.

As eww said, that computer isn't specifically made for gaming. To get advanced graphics in a game, your computer needs what is called a "discrete" graphics processor, or GPU. This means a seperate chip that processes graphics. In Apple laptops, these are only found in the 15" and 17" MacBook Pro. It is not common to find these in laptops in general that are not expensive and high-end. What you have in yours is an "on-board" or "integrated" GPU. This means that graphics processing is done by a small portion of your main processor (the Intel i5 board). This takes away a portion of primary prossessing and dedicates it to graphics. This works perfectly find in most scenarios, but video rendering, gaming, and 3-D graphics tend to suffer. Most high-end, modern games require discrete GPUs to run at full quality these days.
As far as running Windows 7 and Mac OS both, yes you absolutely can. If you install Windows 7 via Bootcamp (this would require you to have a Windows 7 CD), when you turn on your computer it will default to opening up in Mac OS. But if you hold down the Option key (bottom of the keyboard next to the Command button) while the computer is booting up, it will ask you if you want to open Windows or Mac OS.

HT5628 how do I install windows on retina display macbook pro

How do I install Windows on my macbook pro retina display so that I can play an external cd

I inserted a flashdrive and followed the bootcamp directions. I then thought that I could purchase windows online and download that program. When I went to buy windows online, it was $199.00 so I started searching further for an alternative. That led me to blogs regarding parallels, fusion and Virtualbox info. Which led me to more confusion after searching the apple store to buy paralles. I then found out that I needed a windows disc or something to download to actually get windows. Then I quit.
I'm not sure why this particular CD wont play. Some of my music CDs do play so I know the device works.
So, here is the part that will download and states the requirements.....
Silvestri: Companion CD for Saunders Comprehensive Review for the NCLEX-RN Examination, 5th Edition.
This CD is designed to run on both PC and Macintosh.
Your computer should meet the following minimum requirements:
Windows®
Windows XP SP2, Vista, or 32-bit Windows 7 operating system (64-bit versions are not currently supported. However, the application will most likely work on 64-bit version. Run As Administrator may be required.)
Intel Pentium 4 processor (or equivalent x86 chipset) / 1 GHz or greater
225 MB available hard drive space
512 MB RAM (256 MB or lower may be sluggish)
Minimum 1024 x 768 pixels screen resolution
16-Bit color
16X or faster CD-ROM drive / 8X or faster DVD-ROM
Instructions
If your system does not support Auto-run, double-click “setup.exe” from My Computer > CD/DVD-ROM to begin.
Macintosh®
MAC OS 10.4.x or higher operating system
Intel-based processor or PowerPC G4/G5 (867 MHz or higher)
225 MB available hard drive space
512 MB RAM (256 MB or lower may be sluggish)
Minimum 1024 x 768 pixels screen resolution
16-Bit color
16X or faster CD-ROM drive / 8X or faster DVD-ROM
Instructions
Macintosh
A CD icon labeled "SilvestriRN5e" will appear on the screen once inserted. If it doesn't auto-open, double-click it. Double-click " SilvestriRN5e.dmg" to mount the installer volume. If it doesn't auto-open, double-click it. Drag or copy " SilvestriRN5e.app" to your applications folder, or wherever desired on your hard drive.
TECHNICAL SUPPORT
Technical support for this product is available between 7:30 AM and 7 PM CST, Monday through Friday. Before calling, make sure that your computer meets the minimum system requirements to run this software. Inside the United States, call (800) 692-9010. Outside the

How do I install Windows from USB?

I have a 2011 MacBook Pro. I replaced the optical drive with a second hard drive. I have tried the following methods to install Windows.
Installing from an external optical drive: I created a Windows 7 install disk. The windows installer does not start. All I see is a blinking cursor. The disk is recognized when I hold option/alt at startup, but when selected it hangs at the blinking cursor.
Installing from a flash drive: I burned the image to a USB flash drive. The windows installer does not start. The the disk is not recognized when I hold option/alt at startup.
Do I have to do something to enable USB startup? Is there another installation method available?
Thanks.

On MBPs that came with built-in Optical drives, BC Assistant modifies the NVRAM settings and sets the boot option to be the Optical drive. Removing the Optical drive breaks this logic and causes a lot of problems. Modifying the Bootcamp info.plist allows USB creation workaround, but does not allow the NVRAM modification. This is derived by BCA using the Model Identifier in System Profiler.
Your situation is similar to Need help installing Win8.1 from USB on MBP. or Unable to Install Windows 8 on secondary Hard Disk.
The only solution I know is to move the drive that needs Windows to the main SATA connector, install Windows and then move the drive back to the Optibay.
If you have two Macs, one of which have the original HW configuration, than using Winclone is another option by installing it on an "unmodified" MAC and then cloning it to the "modified" Mac.

HT3986 how do i install windows 7 to my macbook pro with retina display

i want to install windows and games like flight simulator onto my macbook how do i do it

http://www.apple.com/support/bootcamp/
Also search this forum for instructions.
Also run Boot Camp Assistant and follow the instructions.
You will need to invest in an external dvd drive if you have Windows on a dvd. A usb stick can be used if you are downloading Windows. You will also need to save the Windows Support software to the usb stick. Read the help files.

How do you install Windows 7 on a Macbook Pro that did not come with an installation disc? I watched a few tutorials online and they all showed a Mac installation disc used to complete installation

What do I do after I intall the Windows 7 disc. and I do not have the Mac installation disc to complete the set up?

http://www.apple.com/support/bootcamp/

HT1846 gtp error while installing windows from usb! how to solve it.

gtp error while installing windows from usb! how to solve it.

Hello mmarti,
Thanks for using Apple Support Communities.
Please ensure you are following the Boot Camp installation guide, as you should be selecting the partition named "BOOTCAMP" when you are at the Windows installer screen. See page 6 of the following PDF:
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Take care,
Alex H.

How to install windows 7 on my macbook pro mid 2009 using usb. right now aim using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me

how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
Iam new to coding. please help me.

try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo:
I want to known how to install windows 7 on Old Macbook 15'inch 2.3 Core 2 Duo by using usb
I try many time, but after restart bootcamp partition, apple show blinking folder error
I think this firmware not support to install windows by usb
NOTE:
I Cannot install Apple New OSX Mountain Lion, Mavericks etc in this MAC
If I cannot install windows 7 on this MAC, so tell me what I will do with this MAC ?

I agree with the optical drive, mine acted strange, and i thought people were crazy and my drive was shot, but a simple cleaning disc worked miracles.
But- are you trying to reboot with both the USB install and the DVD install both plugged in? that would definitely cause confusion.
Do this, reboot with NOTHING plugged in. Once you hear the Mac chime, immediately press and hold option.
You should only see the Mac HD, and Recovery Partition.
THEN plug in your external DVD, and wait a min or two, you should see a disc icon appear next to the recovery partition that says something like windows. If that doesnt appear after a min or two, unplug it and put the USB stick and do the same thing. I had to do it this way on my mid 09 MBP.
Let me know if this works to start the install. If not we may have to start over with Bootcamp Assistant

I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I am using windows 7 professional install disc. I can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

How to wipe off everything from my 15 MacBook Pro? I bought my Mac in Middle 2010. It was with OS X Snow Leopard, and a few months ago, I installed the Lion, so I couldn't just insert the CD and reinstall.

How to wipe off everything from my 15 MacBook Pro? I bought my Mac in Middle 2010. It was with OS X Snow Leopard, and a few months ago, I installed the Lion, so I couldn't just insert the CD and reinstall.

Yes, you can and should. The DVD belong with the MBP. You should use the original DVD to erase the disk and install Snow Leopard prior to sale.
You can't sell it with Lion because it is authorized under your user ID.
Allan

HT3986 I have installed windows 7 into my macbook pro 15 inch with lions. This computer is the current 2.2 GH i7 chip with 500 GB HD. Now, how do I install the drivers. When I started boot camp, the system prompted me to create a CD. What do I do with

I have installed Windows 7 into my Macbook Pro 15 inch with Lions as operating system. (current model with 2.2 GHz i7 processor, 500 GB HD ad 5400 rpm). When I started with boot camp, the system promped me to create a disc, which I presume is for the drivers for windows 7. Now windows is intalled. What do I do with the CD that the system created for me? Also, why does the system automatically start in Win7 instead of Lion. I need to pression the option key to have it start in OS X. I thought it was supposed to be the opposite.

Insert it while you are in Windows, if it does not autostart run setup.exe.
Choose your startup disk using Apple>System Preferences>Startup Disk (in OSX) or Control Panel>Boot Camp>Startup Disk (in Windows)

HT1338 how do i install adobe flash player on macbook pro

how do i install adobe flash player on macbook pro?

Download the player from the link that Allan provided.
Doubleclick the downloaded file to mount the .dmg file.
When a window opens with the 'Install Adobe Flash Player', doubleclick that file to start the install.

Trouble installing Windows 8.1 on MacBook Pro Retina mid 2014

Hi everyone
I recently bought a MacBook Pro Retina (mid 2014, 15", 2.8GHz, 1TB SSD) and wanted to install Windows 8.1 on it via bootcamp.
I have an official .ISO package of Windows 8.1 (it's x64, I checked), got it from MS Dreamspark as a student, and a valid serial number for it, of course.
Burned the image on a 16gb flash drive via bootcamp and proceeded to install. When asked by windows installer which partition to install on, selected bootcamp and clicked 'format', as it was recommended to do in various instructions on the internet (as it wouldn't install without formatting, I tried). The installation went good and finished, but immedeatly after that the installer gave me a notification "Impossible to update computer loading configuration, installation cancelled" (maybe it's not exactly like that, translated as accurately as I could, I'm installing windows in Russian).
I tried it twice, each time re-burning the installation drive. Got the same error each time.
All the software (OS X, bootcamp, etc.) is up to date, the macbook shouldn't have any problems as it was bought just a few days ago.
How can I solve this problem?

yes sorry if it ruin the ending of one of the youtube clips you will be witching if you have problems as how you install windows in bootcamp
https://www.google.dk/webhp?sourceid=chrome-instant&ion=1&espv=2&es_th=1&ie=UTF- 8#q=install+windows+8.1+on+macbook+pro+retina&tbm=vid

How do I install windows from USB on Macbook pro 3,1

Similar Messages

Maybe you are looking for