How do I install Windows XP with boot camp assistant, on my IMac?

Lion cannot BootCamp XP.
You can install XP under virtual machine software (Parallels, VM Fusion, VirtualBox).
And Windows 7 Pro has XP mode. XP will requires probably days of pathing after install and will be completely unsupported by MS within 1 year, but Windows 7 Pro still has great support from MS.

Similar Messages

How can I install windows XP with Boot Camp 4.0.4 in Mac OS X 10.7.5?

How can I install windows XP with Boot Camp 4.0.4 in Mac OS X 10.7.5?

You can't. Only Windows 7 is supported in that configuration.

How can I install Windows 7 with Boot Camp from a Usb memory stick?

What exactly do I need to do to the memory stick?

Depends on the game. Most programs have no problem installing on an external drive.
Of course depending on the game, performance may or may not be an issue. A crossword puzzle game will perform better than a real time fast action game running from an external drive.
2.5, 3.5, 5400rpm, 7200rpm, SSD drives come as internal or external drives. The external frives have an enclosure to hold the drives. Otherwise they are the same. You can buy empty enclosures into which you would put your drive, if you have an internal drive you want to use as an external drive.

Installing Windows 7 With Boot Camp on Mac Pro 3.1 w/GTX285 Video card

I have an Early 2008 Mac Pro 3.1 running the latest version of OS 10.6 with all updates. I have an nVidia GTX285 card installed in the Mac Pro that has been working fine for at least six months under OS 10.6 with Mac drivers downloaded from the nVidia web site and installed under OS 10.6. I replaced the ATi 2600XT video card with the nVidia GTX285 in order to have CUDA support in Premier Pro CS 5 and it works beautifully.
I now wish to install Windows 7 Professional 64 bit on this Mac Pro. I have never had any version of Windows installed on this Mac Pro. I am using Boot Camp assistant and a new full version of Windows 7 Professional 64-bit.
My question is do I need to remove the GTX 285 graphics card and replace it with my AT 2600XT before installing Windows 7? This would be a real pain to do because the two connectors to the motherboard are hard to get to. However, since Apple never used the GTX285 in any of its computers, I am worried that I will not have any video display when I go to try and install Windows 7 with Boot Cam assistant.
Please advise me whether removing the graphics card is necessary before installing Windows 7 with Boot Camp.
Thank you in advance for responding.
Tom

NO.... he has a workstation, and not MBP, nor are "drivers already loaded."
How I would proceed -
Install Windows on its own drive.
Pull all the other drives.
Boot from Windows 7 Pro DVD
Forget Boot Camp Assistant, it doesn't do anything - unless you really want to install Windows on the SAME drive as Mac OS - not ideal and not what most of Mac Pro owners do.
Just insert your OS X DVD once Windows is up to date - helps to buy the SP1 OEM version $129.
Run Apple SETUP.exe (Boot Camp 3.0.x drivers) and update with ASU or manually to 3.2.
No you don't need to go back and use that ATI. And you dont' want to be in the situation of changing from ATI to Nvidia and all the hassle that adds. you are fine.
The Mac Pro is as close as anything to a standard Wintel workstation.
Add MS Security Essentials or KIS or whatever you favor. KIS2011 or NIS2011 are good, MSSE 2.0 is free and based on their enterprise product.
AV-Test.org Test Security-Software

Can I install Windows 7 with boot camp, but install all my PC games for it on an external hardrive?

I have a new Mac, but I want to install Windows 7 with boot camp on it. However, I would only really be using it for gaming.
On another post, someone said that you could not install boot camp entirely onto an external hardrive. As boot camp would only be for gaming, then could I install all my games (when I'm given the option to chose the file of where to install) onto an external drive which is correctly formatted? (what is the format too?) Also, which would allow for a faster gameplay, USB 3.0 or Thunderbolt? as fast gameplay is important
Thank you

How to move steam to another drive:
Delete everything in the Steam folder except for the "steam.exe" and the "steamapps" folder
Move the steam folder over to the secondary drive you want it on
Open the "steam.exe" and it will reconfigure steam
Log in and BAM! All your games are recognized
Now, you can put what ever games you want on the SSD with Steam Mover (or junctions)
Create another folder on the C:\ drive and name it (C:\Users\Sean\Steam Games)
Run Steam Mover and have it move the game to that location and you are done!
Now go play the games you want!
How to have steam on the SSD while having the games on either the SSD or HDD:
Delete everything in the Steam folder except for the "steam.exe" and the "steamapps" folder
Have the "steam.exe" to a folder made on the C:\ drive (C:\Users\Sean\Steam)
Have the "steamapps" folder on the HDD you want to store your games (D:\User\Program Files\Steam\steamapps)
Make a junction from the "steamapps" folder to the SSD folder with the "steam.exe" in it
Open the "steam.exe" and it will reconfigure steam
Logged in and BAM! All your games are recognized and steam is on the SSD and the games on the other drive.
Now, you can put what ever games you want on the SSD with Steam Mover (or junctions)
Create another folder on the C:\ drive and name it (C:\Users\Sean\Steam Games)
Run Steam Mover and have it move the game to that location and you are done!
Now go play the games you want!

Can I install Windows 7 with boot camp on my computer, but install all my PC games for it on an external hardrive?

I have a new Mac, but I want to install Windows 7 with boot camp on it. However, I would only really be using it for gaming.
On another post, someone said that you could not install boot camp entirely onto an external hardrive. As boot camp would only be for gaming, then could I install all my games (when I'm given the option to chose the file of where to install) onto an external drive which is correctly formatted? (what is the format too?) Also, would USB 3.0 be ok, or would thunderbolt be a better option (hoping its USB)
Thank you

you will be fine and either are more than enough for even an SSD.
NTFS of course.
Might look thru Google to see if anyone has managed to boot Windows from Thunderbolt, I think someone managed after install and then made a restore image and placed on Tb storage device.

Installed windows 7 with Boot camp and now cannot get back to OS x x

Have installed Windows 7 with Boot Camp on a 20" 2006 iMac running X 6.8. Now cannot get back to original OS. Tried Snow Leopard in drive and holding c and various other keys at start up but still Windows. Any ideas?

Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select the disk icon for OS X.
5. Click on the arrow button below the icon.

Mac Notebook - Install Windows 7 with Boot Camp

The DVD drive is broken so I am not able to install Windows 7 using boot camp. I created a few bootable Windows 7 USB drives and while the Mac is reading the drive, when I attempt have boot camp use this flash drive to install Windows 7, it keeps giving me an error that the Windows 7 CD is not in the DVD drive. It's looking for the Windows 7 installation CD in the DVD drive.
How do I get around this? I think I created the bootable USB drvie with Windows 7 correctly but it's still not working. Are there other workarounds I can do such as download the ISO file to the Mac's desktop and use boot camp to install Windows?
Thanks.

You didn't mention which OS X version you have. Not every Mac or every version of OS X or every version of Boot Camp supports installing every version of Windows from an ISO image.
Boot Camp 5.1: Frequently asked questions - Apple Support
Depending upon the age and parts availability of your Mac, it might be less expensive to have it repaired, or to purchase an external DVD drive. No guarantee that Boot Camp will 'see' the external DVD, with the internal DVD still connected, however.
If Boot Camp on your Mac does not support an ISO image, and your Mac DOES support the minimum requirements to run a recent version of Parallels (7 or newer), Parallels is capable of installing a Windows virtual machine from a Windows ISO image. Windows performance under Boot Camp is likely much better than Windows running as a virtual machine under Parallels and OS X. The most recent version of Parallels is always available for a short-duration free trial: http://www.parallels.com You still need a valid Windows license to complete even a trial installation. Older versions of Parallels (prior to version 9) will not run under OS X 10.10 Yosemite. Parallels needs to be set to look for the correct ISO image location, rather than a DVD.

Installing Windows 7 with boot camp as whole partition on 2nd internal hard drive

Hi all,
I am unsure what is the recent changes with Apple boot camp. But when I used boot camp utilitiy on my Mac Pro (Mid 2010) to install windows 7 64 bits. It would not install and created a whole lot of problems.
After I initialise the process to install windows 7 using boot camp utilities, I chose the option to create a single partition to installl windows 7 on my secondary internal hard drive (1TB). After I restarted my Mac Pro and started the Windows 7 installation process, I was unable to install Windows 7 on the BOOTCAMP partition created by the boot camp utilitiy. I got an error something about Windows cannot be installed on the selected forum because the driver contained GPT details.
I tried to format the BOOTCAMP partition, but it ended up with errors. I tried to delete and recreate the BOOTCAMP partition in Windows setup, but failed with errors again. As I could not go any further with the Windows 7 installation, I had to hard reset my Mac Pro and tried to reboot back into Mac OS X Lion and that's when the nightmare begin.
Not only I could not boot into OS X, I could not use any of the startup key combinations (i.e. Hold option key to select start up disk, option + R to boot the lion recovery drive, not boot from any external firewire drive installed with OS X Lion). Basically none of the key combinations worked except for the holdingi F12 and mouse key to eject CD.
The only thing I could boot the Mac Pro with is the windows installation CD and Linux Ubuntu Raring Distro. I can install the ubuntu distro without any issue. However, I could not boot my mac pro back into OS X as Linux does not support bootcamp. The only way I could use Mac OS X Lion again is to delete the partition OS X Lion was installed on, and then I was be able to install Windows 7 without any issue.
After installing windows 7 I would have to download boot camp and then use the boot camp control panel to restart in the Mac Pro installation DVD and I will have to reinstall OS X again. After installing OS X, I went to System Preference and tried to select Windows 7 as startup disc. But I failed to as it says "Windows 7" Was installed via another utility. I would have to erase the partition and reinstall Windows 7 again using bootcamp utility. If I try to install windows 7 again, the horror I described above repeats again.
From my understanding, the Boot camp utility creates a new EFI bootrom with Master Boot Record (MBR) in FAT32 format. Therefore I could not boot back into Mac OS X without using boot camp in windows 7 as none of the boot combinations key worked.
I want to ask if anyone is experiencing the same issue as i do, and if there are any solutions to the problem I am experiencing. I never had such issue before. I was able to install Windows 7 on my 2ndary internal hard drive without issue using boot camp. I don't what has changed. I have googled for solution, I only found something related to XOM but nothing else.
If anyone can provide me with any help in regards to installing Windows 7 as a whole partition on a secondary internal hard drive. It'd be grealy appreciated. Thank you in advance.

If you have driver issue, just pre-download the boot camp drivers and save them on an external drive or burn them onto a cd, you will be able to load drivers via the advanced installation option during windows setup, that is if your osx partition isn't actively preventing you from installing win7 on the BOOTCAMP Partition created by boot camp assistant, I find this rather ironic, took me 3 days to figure out this issue, I was stuck without being able to boot into anything beside the windows cd, which wasn't even helpful as I could not install windows as I did not want to delete my osx partition. I lost all my data becsuse of it, as I had no idea what was going on. I tried to recover the partition using testdisk, hfsprogs and gparted in ubuntu life cd but they dont support HFS+. As I could not access osx terminal (couldn't even boot into osx installation dvd with that dreaded MBR created by boot csmp). I could not use pdisk in terminal to restore the osx partition map. Though luck for me. Called applecare and they had no idea what the problem was, and as usual they orgsnised for hard drive replacement. But it was clearly a software issue.
They will have to fix bay2 for me as I can no longer detect any hard disk connected to that bay.

Blank screen when installing Windows 7 with Boot Camp - Mac Mini 2011

I'm new to the Mac scene, having barely any knowledge on the OS.
I've been trying to install Windows 7 via Boot Camp on my new Mac Mini (Latest offering from Apple).
I have an External DVD Drive which I have been using, connected via two USB's to the back of the Mac Mini itself. It's fully functioning, with the Mac recognizing the Drive. I've used it for some CD's and DVD's so far.
I have a full, licensed copy of Windows 7 Home Premium, bought from the Microsoft Store on a DVD. There's both a 64bit and 32bit DVD, of which I have tried both to install Windows 7.
I've been through the Boot Camp Assistant software, un ticking both the "Create a Windows 7 install disk" and "Download the latest Windows support software from Apple" because I already have the Windows 7 install disk. I've had troubles downloading the Windows support software from Apple, as it just stops about 1/4 of the download for no apparent reason.
So once I've made the partition, I insert the Windows 7 DVD into the External Disk Drive, and it reboots. At first it looks like the Disk Drive is working, as you can hear the Disk movement and a blue light on the front of the Disk Drive... But then the screen goes blank, and the Disk stops spinning (from what I can tell). Nothing else happens from then on.
Is there any reason as to why this is happening?
Thanks, Dominic

Yes. Booting from a USB-DVD to install Windows
The MacBook Air has extra drivers. Some people have edited the script preference plist to add their model Not all USB DVD devices may or may not work.
Burning electronic versions like an ISO or in .exe format you will see threads where that is the issue.

How to install Windows 7 via Boot Camp on late 2012 iMac

These notes reflect the installation of Windows 7 Ultimate 64-bit on my late 2012 27” iMac with a 3 TB fusion drive and running OS X Mountain Lion version 10.8.4.
After launching Boot Camp Assistant, click “Print Installation & Setup Guide” and keep this handy throughout the process. There are specific details in the Boot Camp Guide that are not covered by my notes.
Don’t do like I did and expect to start at 11:00 PM on a work night and have Windows 7 working before 1:00 AM - it can take much longer. Many of the activities are best monitored instead of going to bed hoping that next morning will greet you with success.
Download Windows 7 ISO file from Internet and burn to a blank DVD
Insert a blank DVD
Start Disk Utility.
From the File menu, choose “Open Disk Image” and select the ISO to be burned.
In the list of volumes, you will now see an item representing the ISO file. Select it.
Click the Burn button and follow the instructions.
Be patient. In my case the ISO burn seemed to be stuck at 80%. I walked away for a bit and returned to find the DVD successfully burned. This is an exception to not walking away during the Boot Camp process.
Although you should be able to burn the ISO to DVD with any external burner, in my case I found that an Apple USB SuperDrive worked during the Windows installation whereas an otherwise reliable third party CD/DVD/Blueray burner was not recognized by Boot Camp 5.0.3.
If you simply burn the ISO file to the DVD, the DVD will not work. A simple check is to view the DVD’s contents after it has been burnt. If it contains a .iso file only, then you can place that DVD in the trash and start over.
Take some to think through how much space you want to dedicate to Windows 7 that will be taken from your OS X allotment. If you change your mind later, you will need to start the process over, including reinstalling and reactivating Windows 7 and any other specialized software you’ve installed. In my case, I partitioned 251 GB to Windows 7 and that left 233.7 GB free during installation.
When you are ready to begin partitioning your hard drive, unplug all unnecessary USB drives. This includes external drives and your Time Machine drive. Use a USB keyboard with a USB mouse plugged into a USB port on the keyboard. Plug the USB flash drive containing Support Software you created with Boot Camp into a regular USB port. On the iMac, I used the port nearest the right side of the monitor while facing the screen. You also need the USB SuperDrive plugged in with the Windows 7 install disk in the drive. Boot Camp jumps from partitioning straight into installation.
Although the Boot Camp Guide indicates your Mac will default launch in Windows during installation, mine rebooted into OS X each time. When the screen goes white, just hold the OPTION button and select the Windows drive (not the Windows DVD). Be patient. It may look like the Mac is refusing to accept your selection of Windows, but it could be just a little slow to launch.
If you end up installing Windows 7 more than once due to crashes, confusion or whatever, check for a Windows.old file after you’re finished. If it exists, you can delete that file. It’s a place Windows 7 places files from previous installs in case you need to save something.
As of this writing, I need to use a USB keyboard to use OPTION to have the option to launch Windows 7. Once in Windows, my Logitech K760 bluetooth keyboard works fine. It takes too long for bluetooth to sync for the keyboard to keep up with the Mac booting up. Although Windows 7 recognizes my second monitor and the drivers are up to date, the second monitor has a black screen and windows cannot be moved onto the second monitor.
I hope that Apple continues to develop Boot Camp and improve the Installation Guide for future users. When Apple advertises a feature, such as Boot Camp, there is an expectation amongst consumers that it will simply work. When a key feature fails to live up to expectations, it reflects poorly on Apple.
Thank you,
Steven Cagle
<Link Edited By Host>

Have you tried a USB installer?
Boot Camp Assistant will now ask if you want to install the Windows installer with the Boot Camp Dirvers onto a USB drive on some supported and not so support machines.
Do a search for "Windows USB installer" on Yahoo/Google and there should be quite a few.

How can I install windows 7 using boot camp, if the partition will not format correctly?

Hi All,
I'm new to this forum and have had a chance to look around a little bit, but haven't really found an answer to the problem that I'm having.
I have an imac and I'm attempting to use boot camp. I have used it in the past, with prior versions of mac os x, but this is the first time that I have tried it with 10.6.8. The first thing I found out is that I can't use Windows XP, even with service pack 2 installed, because it doesn't find the "boot camp" partition. So, I recently obtained a full retail copy of Windows 7 and have been trying to install it. I have no problem with the boot camp assistant creating the new partition, 200 GB. However, when I insert the Windows 7 DVD and the computer restarts in the Win 7 install screen it tells me that I cannot install Windows on the selected partition (which I expected to see.) So I choose "format" the further format the partition. It doesn't ask me how I would like to partition this, but just seems to start. All seems to go fine until it finishes and i see the same message of "Windows cannot be installed in the selected partition." I can click on the format tab endlessly but it still doesn't seem to work. Does anyone have any ideas? I've called Apple and their technicians keep telling me that I need to reinstall the Mac OS again, which I've tried. It doesn't seem to help either.
Thanks in advance for your help,
DTK

David Kaff wrote:
Yes, I choose "Format" under the advanced options screen. It seems like it formats, but then I get the same message of "Windows cannot be installed to this disk. The selected disk is of the GPT partition style." I can continue to click "format" but i keep getting the same error.
There is the answer, right in front of us ....
Delete the bootcamp partition and start again the correct partition type is GUID but BootCamp should take care of that automatically so try again.

Install Windows 7 with Boot Camp 5

Hi, I have a mac book pro 15" retina display that I bought a few days ago.
I want to install windows 7 with bootcamp. I have the DVD of windows 7. The external driver reads it well.
Now after downloading the drivers for windows and on the step that I have to give how much space to windows bootcamp tells me that it will only work with windows 8.
Thst's a pain cause I hate windows 8.
On the manual it says that boot camp should work with windows 64 bits and also windows 8.
Any help pls?
I dont want ending using parallels......
Ma y thanks!! N

Try to continue creating the partition in Boot Camp Assistant. Then, boot directly from the Windows 7 disk. You should be able to wipe the FAT partition you created and continue.

How can I install Windows 7 through Boot camp?

I have a MacBook Pro Mid 2009 and I am running OSX Mavericks. How can I install Windows 7 from the install DVD? Thank you for the help in advance. Just as a side note, if I want to run GTA 4 on Windows 7 through Boot Camp, will it be faster than it is on Parallels? Thanks again.

Games work much better in Boot Camp. Note that a virtual machine does not use all the performance of your MacBook, so they may work worse than in Boot Camp.
Your Mac supports a 64-bit Windows 7 version, so open Boot Camp Assistant (in /Applications/Utilities), tick the options to download the Windows support software and install Windows, and follow its steps. Apple has got all the steps you need to install Windows > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Remember to install the Windows support software after installing Windows

Problems installing Windows 7 with boot camp, cant find the cd/dvd driver...

I´m having some problems installing Windows 7 on my new 12,1 (21,5) iMac with boot camp. When the computer restarts and the Windows 7 setup begins, i get the message that the cd/dvd driver cant be found, so i can't continue the installation. I've tried searching online for the driver, but can't find it. The cd/dvd seems to be a OPTIARC cd/dvd ad-5690h, which seems to be produced by Sony. I have a authentic windows 7. I even tried loading everything ver to a usb-drive, but then it wont boot.

After reading around on this, and other forums I tried to burn a new dvd at reduced speed(2x), but that did'nt work either... I have an authentic windows 7 iso, downloaded with serial, is there any way to boot this from a jump drive or external hdd?

How do I install Windows XP with boot camp assistant, on my IMac?

Similar Messages

Maybe you are looking for