How do I keep the action created in Flash (.fla) the same when published in .swf or .html?
I created a complex fixed line and a bird flying on the line using tweens from point A to B to C. When I view the birdline in play or by scrubbing across them in the layers mode, the bird follows the line just as designed. When I test the birdline in "test Scene" or "test movie" one bird flies from point A to C, then another bird appears at point B and flies the course to point C. The published .swf and .html do the same as the test functions. What can I do to get the published version to behave the same as the design?
Rob,
Thanks for your response. There are no error messages in the test functions, and no alerts in the keyframes. They show green.
Attached you will find both the .fla file and the .swf file. I am new at this, so your help is greatly appreciated.
Richard (Sir rpm)
PS- I am sitting in Sweden right now. So I am off to bed and will be back on line in the morning. Please forgive the delay in my response.
Similar Messages
-
I have outlook 2013 and am trying to add an exchange 2010 multi-tenant account.
I have created a new profile.
I select Manual setup or additional server types
Then select Microsoft Exchange Server or compatible service
I enter the server settings. But the following error is returned when i click check name
"The action cannot be completed. The connection to Microsoft Exchange is unavailable. outlook must be online or connected to complete this action"
I have tried selecting more settings, selecting security, and then selecting the option:- Always propt for logon credentials.
But the same error is still returned
I tried deselecting the option Encrypt data between Microsoft outlook and Microsoft Exchange
But still continue to get the same error.
Reading from other forums I have tried restarting the Microsoft Exchange Address book service under services on the exchange server.
But this did not help either
i am able to access the email accout via outlook web access. I am also able to add the email account to my iphone with the server details and it adds fine onto my iphone but cannot add it to outlook 2013.
any help would be appreciated.
Thanks
Rehan MiahHi,
This issue may occur when the HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders registry key does not contain all of the required data. Specifically, these problems occur if the
AppData string value is missing from this registry key.
NOTE: The \User Shell Folders key also contains a string value called
Local AppDatawhich is different from the value called AppData. The value that causes this problem (if it is missing) is the
AppData value.
To resolve this issue, import the User Shell Folders registry key from a working Windows User Profile.
For more information, please refer:
http://support.microsoft.com/kb/2264398
Hope this helps.
Best Regards,
Steve Fan
TechNet Community Support
I have looked in the registry and Appdata is not missing it has the following value "%USERPROFILE%\AppData\Roaming" also Local AppData is there with the following value "%USERPROFILE%\AppData\Local" i do not have a working machine to import the user shell
folders registry key so any other advice would be useful.
thanks
Rehan Miah
In order to test what you suggested i created a windows 7 virtual machine installed outlook 2003 however i also get the error on the virtual machine that i have created.
any further suggestions would be a great help. -
I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the actions box up, it is only showing a small list of effects to use. And no side bar. So I can't go any further. When I click on the little arrow at top and click on "load actions", I am only getting a box with empty space saying "No items match your search". The folder at the top does say "Actions". How do I get more effects? The tutorials that I've checked into all show a long list of effects in their box. Can anyone help?
To use the existing actions, try the following:
1. Open one of the Action Sets, in this example Special Effects is the Action Set, by pressing the small arrow beside the set name.
2. Then click on the name of the Action, in this example Faded Ink is the Action name.
3. Then press the Play button to run the action. -
SoapFaultCode:1 The [action] cannot be processed at the receiver.
Hello,
I am testing an external (Java) webservice. For that matter I have created an ABAP client proxy in my system (Nertweaver 7.0, SP14).
When testing the proxy (Proxy->Test) I get the following error message:
SoapFaultCode:1 The [action] cannot be processed at the receiver.
Any idea where this message comes from and what I should change in my configuration?
For configuration of the logical port I use the SOAMANAGER.
Thanks in advance,
MichaelHi,
i also faced the same error.
my function and webservice worlked well, but i still got the exception.
someone solved the problem?
Thanks.
Oliver.
Hi,
i found a solution to solved my question, maybe helpful for you.
you can check the notes : Note 1361688 - Interop issue: SAP consumer calls 3rd party provider
To go around this issue, either you deactivate the WS-A protocol on the SAP consumer or turn on the WS-A
protocol support on the 3rd party provider. To deactivate WS-A protocol on the SAP system:
1. Start the SOA Manager with TCODE soamanager,
2. Search for the consumer proxy,
3. display the proxy definitioin,
4. Select the logical port,
5. Choose the tab "Messaging",
6. In the DropDown "Message ID Protocol" select "Suppress ID Transfer".
regards.
oliver.yang
Edited by: oliver.yang on Nov 19, 2009 8:39 AM -
The action cannot be completed because the file is open on another program
I experience a weird issue.
I have Windows 2008 server. Created 2 shares on the server. Every day starting between 2 and 7 PM i cannot save or rename files and folders at the root of the share. I have no problem to rename files in sub folders. This issue happens if i trying to rename
file on vie server console, or accessing the share from Windows 7. no issues from Windows XP. the error i get: "the action cannot be completed because the file is open on another program"
I don't have any software running on that server except Backup Exec that runs backup at night. I uninstalled Antivirus, still same issue.
Please help.Hi,
The folder rename operation fails because thumbcache.dll still has an open handle to the local thumbs.db file and does not currently implement a mechanism to release the handle to the file in a more dynamic and timely fashion.
For more detailed information, please refer to the kb article below:
Renaming a network folder in Windows 7 Explorer fails with "the action can't be completed..."
http://support.microsoft.com/kb/2025703
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hello dps team,
A few weeks ago we renewed our dps licence. Now we want to release our newest issue but we can't. Following error message appears "At the attempt to release the folio creates an error. The process could not be started. Please try again later."
Is there a problem with our dps version or any maintenance work at the servers from Adobe?
Best,
OliverHi Oliver,
Please login to your DPS dashboard and contact support by clicking "Contact support" at the bottom left
Thanks
Lohrii -
I tried to delete a calendar while in the app, but now it says the action is not supported in the server? There is also a pop-up that appears every 30 seconds to tell me about the error.
Probably better to be posting this in the Calendar forum.
-
When I attempt to save a new bookmark and want to save it in a folder the window that typically appears just below the address bar will not stay on the screen. It flashes on the screen and as soon as I move my cursor over it, it disappears. It will not allow me to make a selection of any kind. If I randomly hover over the general area the window will flash back in view but disappear again just as quickly. If I then show all my bookmarks, the bookmark was saved and I have to move it to the folder I actually want it in. Just a few extra steps, but still very annoying. Please help!
DID YOU FIND A SOLUTION???I HAVE TH ASAME THING AS WELL
-
ive had my iphone 5 for just over a year now.. its all of a sudden decided to shut down on me.. ive tried everything to get it switched back on again but nothings working, when i connect the charger it jst flashes with the apple icon.. anyone help?
Did you try a reset, hold the power button and home button until you see the apple then let go? Did you try to restore as new in iTunes on your computer?
-
How do you keep two (2) totally separate libraries on the same computer
I have had an iPod nano for a few years and have built up my own library. My son received an iPod touch for his birthday. How do I keep my music and his music totally separate? We are using the same PC (the same iTunes link). He has his own iTunes account but it is still trying to sync my recent purchases with his iPod. And vice versa. His songs are in my library. Help!
I sort of have a similar question about the same situation.
I created a new iTunes library for my old iPod mini and loaded it up with music for my father-in-law. Only problem is, when I connect my 2G iTouch, my library with thousands of songs doesn't come up. I tried holding Shift down when I open iTunes to choose my library, and I see the one I created for him, but I can't find my library.
Any ideas on how to find it or where it might be? I've been working on this for hours and have tried almost everything. Any help would be greatly appreciated, thanks in advance! -
How can I assign a action to a button of the many scripts in the script file.
How can I assign one action of many actions in a script file.
I have many actions in a script file and I want to run one of them by clicking a button on the panel. However, loading the script I can not isolate the action that interests me.Hello,
Try System Preferences>Energy Saver>Options tab, uncheck Allow power button to sleep computer.
Some possible other options...
Control-Eject
The dialog box "Are you sure you want to shut down your computer now?" appears with options to Restart, Sleep, Cancel or Shut Down. After the dialog appears, press the R key to Restart, press the S key to Sleep, press the Esc key to Cancel, or press the Return key to Shut Down.
Control-Command-Eject
Quits all applications (after giving you a chance to save changes to open documents) and restarts the computer.
Control-Option-Command-Eject
Quits all applications (after giving you a chance to save changes to open documents) and shuts the computer down.
Command-Option-Eject
Puts the computer to sleep.
Shift-Control-Eject
Puts all displays to sleep.
Power button (if the computer is not responding)
Press and hold the power button on the computer for six seconds to shut down the computer.
http://support.apple.com/kb/ht2448 -
How can I keep a bean alive forever through out the live of container
I want to load some important information from DB (which takes long time to calculate) into memory at the start of the app and refresh it periodically and keep it in memory for all jsp/servlets to use.
- Environment Tomcat / JDK 1.5x
I was able to do that and keep it alive as long as the app is active, but if the app is idle for a period of time some how the bean is thrown out of memory and when user acceses the page it connects to the DB again. (I have logic that if the contents of bean is empty get it from DB and keeping the data as a hashtable). I am using scope=application in all jsp's that access this bean.
Any thoughts ?? or any other way to do this (I am almost ready to write to file after long testing...) Please help.
- RaviYou're welcome.
I think you need to define it in web.xml , as mentioned in this thread
http://forum.java.sun.com/thread.jspa?forumID=45&threadID=479858
It's written better on this thread:
http://forum.java.sun.com/thread.jspa?forumID=45&threadID=739687 -
How do I keep two different iPads from having all the same apps
I have an IPOD Touch and an IPAD 2. My wife would like the IPAD 2 since I am getting the new iPad. Right now the IPOD Touch and the IPAD have all the same apps on them, since I cannot create a different configuration for each one. Now that I am getting the new IPAD, how do I set up a different sync configuration for each of the two IPADs? Right now I have to manually delete the IPOD Touch apps from the IPAD each time I sync, since they do not display correctly on the IPAD (small screen in middle of IPAD). I just wonder if I have to manually remove my apps from my wife's IPAD every time I sync the IPADs in ITunes. She does not want all the stuff I currently have on my IPAD. I use an iMAC for the sync.
ThanksIt sounds like you're using the same AppleID to purchase apps for all devices, is that right? If so, you need to make sure that
- You turn OFF automatic downloads for Apps (on the device, Settings, Store, Apps, turn off downloading)
- You manually sync each device through iTunes (once you connect the device, or if you sync through wifi, you can specify which apps get synced to each device). In the Apps tab in iTunes, make sure you only select the apps you want to be on that device.
Matt -
How do I keep a rented movie locally stored for the authorised period?
Okay, so just bought an Apple TV for the first time, so this is all new to me! So far, most of it makes sense, but I'm wondering about how the unit manages downloaded content.
It seems to me that you rent a movie, Apple TV starts downloading it and makes it available to play. I live in Australia, so I have 30 days to start watching it, and once I've started, I have 48hrs to finish watching it.
So, I downloaded our first movie the other night. We watched half of it before sending the kids to bed (school night) and watching the rest of it ourselves. The next day we went to start watching it again, but from about halfway through so the kids could see the end of it. All was fine, except I noticed that Apple TV was downloading it again.
This puzzled me - that is, it didn't seem to make sense - I assumed the onboard 8GB would be used to store it for 48 hours from when we started playing it? So, is there some way to achieve this? For eg, if I set Apple TV to never sleep prior to renting a movie, then rent a movie, will it keep it stored for the authorised period because it hasn't gone to sleep?
If not, is there some way to achieve this outcome? I just don't see the point of using up a data allowance by downloading the exact same thing - even if I change my settings to standard definition it's still a waste of data.
I did do a few online searches of various FAQs, but couldn't find the answer to this question, so hopefully someone can shed some light on this for me or refer me to a good source of info.
Thanks!Joe Felice wrote:
Thanks Brian. I realise the OS controls memory management, but was wondering what "rules" it used to manage it and whether any of the user settings (such as sleep) would affect it?
So, if there's nothing the user can do to impact this, would it make more "sense" to rent the movie on iTunes on your Mac and then watch it on the Apple TV? Would that negate the need to re-download the movie each time you watched it? And, if so, what are the disadvantages of this approach?
Or should I just forget the whole thing, increase my data allowance, and not worry about it?
Still, it'd be nice not to have to redownload it if that was inconvenient for some reason.
Simple things like watching a movie preview or playing content from local iTunes will flush the buffered rental from ATV 2/3 - they only have 8GB of solid state storage and if you rent more than 1 HD movie (4GB or so) they will be competing for download/buffering space.
The only disadvanatges of renting in iTunes are:
- need for itunes to be running to play
- some titles available in HD on ATV are only in SD via iTunes!
AC -
How can I keep a newly created reports server running?
I have had to create a second reports server under 9ias Rel.2. This server is in addition to the out-of-the-box server installed with 9ias Rel. 2. I created the new server logged on to a Solaris session using the command rwserver.sh server=<new name>. The creation went just fine. I am able to use the new server just fine, EXCEPT if I log off the Solaris session used for the startup of the new server.
I know this sounds similar to the problem of the default server going down if the unix session is logged off. However, I solved that problem by installed XVFB, using a DISPLAY of other than 0, and changing the opmn.xml file. All that works great. But, it does not seem to have an effect on the new reports server I created.
Does anyone have any ideas how to get around this issue for reports servers other than the default?I had similar prob. but with vnc instead of xvfb.(similar product)
I put the startup of vnc in the same script as the start of the rwserver.. it looks like :
export DISPLAY=servername:12.0
vncserver startup
wait 5 secs
set oracle homes etc..
rwserver.sh server=myrepserver
I start this script using the unix nohup command :
nohup startrepserver.sh &
the vnc server starts and the reports server starts..
I use a different port (12, 13,..) for reports/discoverer/forms compilation
Maybe you are looking for
-
I created a pdf form from a Word doc with 9 pt aerial font formatting; the text on the pdf form is aerial 9 pt, but the fields are formatted in courier 12 pt - How do I reformat the font in the fields??
-
Time_out dump error in RSTXSCRP while Importing SAP Script
Hi Experts, I am using RSTXSCRP program for Download and Upload the SAP Form. I am downloading script 'ZF110_HDFC_CHCK' is successfully. after that before uploading i open the notepad i replace 'ZF110_HDFC_CHCK' to 'ZF110_HDFC_DM'. then in selecti
-
My airport show that the airport card doesn't install. How can I solve this symptom? It's usable 2 days ago.
-
Hello guys, In a customer we have a CRM 5.0 installation with the following SW components: BBPCRM 500 SP10 SAP_ABA 700 SP12 SAP_BASIS 700 SP12 In the ICWC, when we sent an e-mail we have the opportunity to choose the source of addresses, like
-
Displaying no Records found in webdynpro side?
Hi All , How to display the error message coming from R/3 side. If iam giving input from dynproside, if no Records found in R/3 side how can I display "No records Found"in Dynpro side. Please help me for this. Thanks Nageswara.