How do I keep the date/time when exporting photos?

When exporting photos from Photos.app on my Mac, it doesn't use the metadata that it displays in Photos--it uses the current date/time. So when I export a photo from 2010, it says it's dated 2015 when I import it into Aperture.
Is there a way to export an image with its original timestamp? Is this a bug? Thanks.

If you are editing tif files, then you have only a couple of choices.
Flatten the image before you save it.  This will reduce it down to one layer. That's the smallest you can get.
When you first open the image, look to see if it's 8 bit or 16 bit tif.  It won't help you, but if the image is 8 bit, and you save it as 16 bit, you will have dramatically increased the size of the file for nothing.  If it's started as 16, no worries!
check if you are saving with compression.   Tif compression is lossless, so unless you did something like resize+resample, it remains the same bit density, etc, so should be just as printable as what they sent you (unless you messed up!).
Cheers!

Similar Messages

  • How to cell register the date/time when you put a value in another cell

    Hello guys!
    How do I get a cell (eg A2) tell the date and time when I put a value in another cell (eg A1) in Numbers?
    For example, I want to register a cell to read my electricity meter.
    I write in cell A1: 45809. When placing this value in A1, I want to appear (on A2) the date and time when I did that record automatically. Is it possible?
    I hope you understood the question!
    Thank you in advance to those who try to help.

    There is not automatic time stamping of on entry of a time.  One suggestion I've seen has a cell that has the current date and time.  Everytime you cahnge any cell that cell will update.  You can then copy that cell and paste the value into your date/time cell adjacent to the meter reading:
    Create a new, plain table:
    Now in cell A1 enter the formula "=now()"  short hand for this is:
    A1=now()
    now resize the table so it is a table that is 1 cell by 1 cell by selecting any cell, then dragging the table size control in the bottom right corrner towards cell A1:
    It should look like this when you have completed this task:
    Now create another new, plain table and enter "Date" for cell A1, and "Meter Reading" for B1:
    Now you can enter a meter reading (I entered "45671").  Now select the CELL that has current date and time from the first table at the very top, and copy:
    Now select the cell in the date column where you want to put the current date and paste values by using the menu item "Edit > Paste Value":

  • How do I keep the original size when exporting?

    I have people sending me photos to edit. I work a little in photoshop cs4 and then back in lightroom 3, but when I go to send them the photos back ,they are HUGE! How can I send them the same size file they sent me? (the ones I am currently working on are tiff. files.)

    If you are editing tif files, then you have only a couple of choices.
    Flatten the image before you save it.  This will reduce it down to one layer. That's the smallest you can get.
    When you first open the image, look to see if it's 8 bit or 16 bit tif.  It won't help you, but if the image is 8 bit, and you save it as 16 bit, you will have dramatically increased the size of the file for nothing.  If it's started as 16, no worries!
    check if you are saving with compression.   Tif compression is lossless, so unless you did something like resize+resample, it remains the same bit density, etc, so should be just as printable as what they sent you (unless you messed up!).
    Cheers!

  • How can I get the Date & Time to appear on my final project in iMovie11?

    I am using iMovie 11 and have imported video from a Canon Vixia-HF21 camera. The EXIF data is imported along with the video but when I produce the final product, the date and time do not appear.  How can I get the Date  & Time data to appear on the final product?

    There is a date and time Title you can use. If I recall correctly, it displays date plus hours and minutes, but not seconds.

  • Hello.  How do I keep the actual size of a photo when adding to a Keepsake?  Used to do this but have forgotten how!

    Hello.  How do I keep the actual size of a photo when adding to a Keepsake?  Used to do this but have forgotten how!  Need help please!
    T.

    Here is my suggestion:
    Open a blank, new file (File>new>blank file) size 8.5x11"
    Open the collage
    Go to Select>all
    Go to Edit>copy
    Go back to the blank file created in step #1
    Go to Edit>paste. The collage will be on its own layer
    Access the move tool, and with the corner handles resize the collage. Using the corner handles should preserve the aspect ratio. If you open the rulers, you will have a point of reference as you go along.
    Print a draft copy to see if it will be suitable in the frame..
    Please report back with your progress.

  • Adobe Premiere Elements 11 - HOW DO I KEEP THE IMAGE QUALITY WHEN I RENDER?

    I'm using Adobe Premiere Elements 11, on a Windows 8 PC and when I "render" still pictures, some videos and simple effects -- they lose quality and get grainy --
    HOW DO I KEEP THE IMAGE QUALITY WHEN I RENDER?

    Molnar are you receiving that error during the download or install process?  Also which operating system are you using?

  • How do I change the date/time of a dll created in LabVIEW without killing it

    I use the LabVIEW (6.0.2 of course) Application builder to create a dll, and I cannot enter creation information, nor can I modify the date time property, which labVIEW does not properly set. I have tried to modify this information in Visual C++, but that destroys the dll because it wasn't compiled in VC++, and therefore isn't compatible.
    If anyone knows how to correctly modify the date/time (and the checksum) without destroying the dll, I would be gratefull to know.
    Thank you

    Dear Sir,
    I was browsing through MSDN in trying to find the info you are looking for and I step into this next file:
    "Peering Inside the PE: A Tour of the Win32 Portable Executable File Format"
    Which you can locate in the msdn.microsoft.com page by going to the search box and typing that title. The first result is that document. Also you may want to check the "imagehlp" file of the msdn library. This documents provides information on the DLL standard and functions.
    Good luck!...
    Nestor Sanchez
    Applications Engineer
    National Instruments
    Nestor
    National Instruments

  • How can i set the date time year to my i pod

    how can i set the date time year to my i pod touch

    Hello Theodora,
    You can do this via your iPod's Settings application.
    B-rock

  • Can we find out the date/time when the datafile last extended?

    Hello all,
    Can we find out the date/time when the datafile last extended?
    Is it possible to find out from the alert.log file?
    Correct me if I am worng?
    Thanks in advance
    Himanshu

    In continuation with the earlier post, can you tell me what sort of entry should be search if the above information is available in the alert.log file?
    Thanks
    Himanshu

  • How can I change the date "taken" on individual photos in iPhoto?

    How can I change the date "taken" on individual photos in iPhoto? I have some photos that were scanned and the date "taken" info displays the day the picture was scanned as opposed to the date it was actually taken. Is there some way to edit this information?

    In iPhoto '11 on your Mac use the command "Photos > Adjust Date and Time" and enable the "Modify original files" option, if you want to set the date of the originals to the correct date as well.
    Regards
    Léonie

  • I have an iphone 5 and my dad has iphone 5s , we want to interchange the phones . how can i exchange the data , contacts , apps and photos ?

    i have an iphone 5 and my dad has iphone 5s , we want to interchange the phones . how can i exchange the data , contacts , apps and photos ?

    Make sure to have a backup of each device, then use the backup to restore the phone after you have set it up as new device, explained in this article:
    How to back up your data and set up as a new device
    iOS: Back up and restore your iOS device with iCloud or iTunes
    Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
    Check this article about the content of the backup.
    iTunes: About iOS backups
    Don't forget to deactivate the Activation Lock on both phones:
    iCloud: Remove your device from Find My iPhone
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account

  • How can I make the data persistent when using plist ?

    I have a UITableView table1. And when I touch any cell in the table a new UIViewController appears and it have two UITextField's name and description. After entering the data in both the text fields I used the save button to save them. In save method I wrote the code for the data to be stored in plist.
    -(void)save:(id)sender
    indexOfDataArray = temp;
    NSString *string1 = [[NSString alloc]init];
    NSString *string2 = [[NSString alloc]init];
    string1 = nameField.text;
    string2 = descriptionField.text;
    NSDictionary *myDict = [[NSDictionary alloc] initWithObjectsAndKeys:string2, string1, nil];
    [myArray addObject:myDict];
    NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
    NSString *documentsDirectory = [paths objectAtIndex:0];
    NSString *path = [documentsDirectory stringByAppendingPathComponent:@"VideoData.plist"];
    [myArray writeToFile:path atomically:YES];
    UIAlertView *alertMesage = [[UIAlertView alloc] initWithTitle: @"Save Alert" message:@"The data entered is saved" delegate:nil cancelButtonTitle:@"cancel" otherButtonTitles:nil] ;
    [alertMesage show];
    [alertMesage release];
    [myArray retain];
    But the problem is every time I restart my application the data in the plist is deleted. How can I retain the data in the plist name I specified ?

    I think yes, I am specifying only one file name to store in the path. I understood my where I am wrong.
    If I added data in plist for two items(item1 and item2). And again I need to add next two items(item3 and item4) . How can I make item3 and item 4 do not replace item1 and item2 ?
    Thank You.

  • I just updated my iphone 4 to ios6 and now I can't keep the wifi connection to stay on. I have to keep entering my wifi password when the phone goes to sleep. How do I keep the wifi connection when I wake up the phone?

    I just updated my iphone 4 to ios6 and I can't keep the wifi connection when the phone goes to sleep. I need to keep entering my wifi password when I wake up the phone. How do I keep the wifi on each time I walk into my house without reentering my password?

    What? Do you work for Apple?
    I have been on the phone for Apple since 5:30 Eastern Time today. We are still on the phone with them. It is 10:14 PM. We are going to get a new phone because the ios6 has major problems! The wifi connectivity is a serious problem. Apple is aware of it. More people need to do something about it. I am willing to start a class action suit against them. I have means to an attorney pro bono. If you are having problems using your iphone 4 or 4s with wifi and ios6...I suggest you spend time calling a senior advisor and get a new phone sent to you. They know they messed up but they can't fix it.

  • How to Avoid Printing the data twice when the sub report has drill down?

    Hello,
    I have a sub report that has drill down which is placed in report footer.When i run the report sub report displays the data but when i tried to drill down it displays the same data again.After that i can able to drill down on sub report.Is there any way to avoid
    printing the same data twice.
    Thanks in advance.

    Hi,
    If the subreport you're referring to does not grow in size and it does not span multiple pages and you know the size of it, here's what you can do to stop drilling into subreports :
    1) Create a text object as large as the subreport (perhaps bigger than it) and fill it with spaces or new lines
    2) Place it 'over' the subreport such that it covers the entire area occupied by the subreport
    3) The subreport at all times should be smaller than the text object in all dimensions
    Now, when you hover the mouse over the subreport, there isn't any magnifying glass for you to drill down into.
    If the subreport has further drill-down functionality, then this isn't for you! Because, it just wouldn't allow you click on any objects in the subreport because of the text object eclipsing it. This is the only workaround I know at this point in time and I know a lot of users are looking for this.
    I would suggest that you log this as an Enhancement Request at http://ideas.sap.com for our developers to have a look into this.
    And finally, I also found an old forum post where Jamie has suggested a way to get this working on the Business Objects Environment. Give it a shot, if that's where the reports are eventually run.
    How to disable subreport view
    Hope this helps!
    -Abhilash

  • How do you vary the Date/Time stamp format in File Adapters

    In the receiver channel of the File Adapter where you specify the 'File Name Scheme', you do have the option of specifying a 'File Construction Mode' of 'Add Time Stamp'.  How can you specify a different Date/Time stamp format ( eg MM/DD/YY vs YYYYMMDD vs MMDDYY, etc. ) without changing the Date/Time stamp for the entire SAP system?  Also, can you control where the Date/Time stamp appears in the filename?

    Hi,
    There are many threads discussing the same issue. Go thro the following:
    Dynamic file name (Date) in Receiver File Adapter
    Receiver File Adapter - TimeStamp
    Bhavesh's reply in above thread:
    You can use Adapter Specific Identifiers and then change the file name in the mapping. Append the tiem stamp in the format that you want and so on.
    Just use this code in an UDF,
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String SourceFileName = conf.get(key);
    java.text.SimpleDateFormat dateformat = new java.text.SimpleDateFormat( "yyyyMMdd" );
    dateformat.format( new java.util.Date() );
    String newfilename=SourceFileName+dateformat;
    // change to new file name
    conf.put(key, newfilename);
    return "";
    Regards,
    P.Venkat

Maybe you are looking for

  • How to build customized screens for Master Data Users

    Hi all, I need to build screens on top of centrally managed master data hub (Data Manager). I want to confirm following 1) Should I go with Guided procedure (CAF) and pre defined Portal contains provided by SAP for MDM? 2) Should I use Java API's pro

  • Unknown User Unhandled Exception

    Hi all Any idea how to solve this unknown user error after Screen Locking Time? Kedalene

  • Twisting a Layer, Vector Layer and/or Text Layer?

    Hello everyone, I'm stuck and could use a hand. Here at work, I have the entire CS5 Master Suite at my disposal. Although I'm familiar with the Adobe Suite, I'm having a hard time figuring out the best/most efficient way to do this effect: Now, my bo

  • Apply patchset on Sol10-x86

    Hi I have  to  apply the latest patchset to  a system running Sol10-x86 with  root on zfs As  the usual  backout strategy of breaking the root mirror will not work here , I want some opinion on  the backout strategy . Particularly I want to know if I

  • I must degrade itunes

    I have a really strange situation. I must reinstallation OS X 10.5.8 and I have no back up. When I have done it, so the the softwear uppdating. Update my iTunes to iTunes 7.6. And this update organally cant do in OS X 10.5.8. but its updating it anyw