How do I listen to a recording in higher speed

I have moved my voice memo's to iTunes on my macbook, but I can't listen to the recordings (lectures) in a faster speed. I remember there used to be an option to change the speed and listen to a lecture of 2 hrs in 1 hr, by adjusting the speed to 2. Does anyone know if this option still exists?

Hi there! I don't think you can do this on iTunes anymore (I may be wrong) BUT there is this simple solution using garageband:
Open garageband and call a new document "Lecture 1" or something like that. Drag the recording into the space it gives you, and it will upload
Double click the track to bring up a menu, and make sure "Follow Tempo & Pitch" is ticked.
Next, after that is ticked, at the bottom of the screen go to "Project" by clicking on the little icon in the blue screen. It will look like the picture below. Click on the tempo (In the picture you click where it says 120) and you can slide the speed up and down! ENJOY! Hope this helps

Similar Messages

  • How do i change the http setting to high speed

    how do i change the http setting to high speed ???

    Are you experiencing problems with a slow connection in Firefox?
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    Another possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, maybe after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
    See [[Firewalls]] and http://kb.mozillazine.org/Firewalls

  • Help! Trying to record/render high speed movies (1/1000fps). Can I do this?

    I am trying to make high speed movies of the twitches. My camera can do up to 1/10000 fps analog but I cannot change the raw video fps. I believe it is 29.97, because of this each frame has 2 or more captures on it. No good! Can anyone help.

    What camera is this? How is it recording the footage?
    I had footage from a camera that shot at 2000fps to a hard drive..a high speed computer camera. That raw footage wan't something I could use in FCP, as it was some proprietary format. They needed to export it from their system as a Quicktime movie...Animation codec. And it being a computer camera, it captured with computer monitor dimensions, 800x600. So I had some resizing to do.
    How does your camera work?
    Shane

  • How can I add an address to my high speed contacts?

    I have an address in my general contacts but I cannot figure out how to add this name to my catagory of high speed contacts! Help!

    From the general contacts group drag the name (contact) over to the high speed contacts group in the left side column.

  • How to write to DAQCard-5633 Port at high speed

    I am looking for a sample vi that allows me to write a 8 bit x n digital array out at high speeds with a DAQCard-5633 high speed digital I/O card.  I realize I need to use the traditional DIO vis, specifically the DIO Write.vi, but haven't been able to make it work yet.  I tried the sample vi I found on-line called syncDIO_32HS.vi, but that doesn't write anything out, and gives a timeout error.  I know the card works because I can do low speed DC write type operations.

    I found the solution myself.  If I am using I/O connector handshaking I need to connect REQ and ACK. I should have used internal handshaking.

  • Coverting a high speed cassette recording

    Help! My daughter sent me a cassette that was recorded at high speed. (She is on a mission for our church) I have imported it into garageband to see if I could figure out how to slow it down so that it is comprehensible but I can't seem to slow it down any. Does anyone have an idea of how to do that?

    stevenaps wrote:
    how you imported the cassette recording in to garage band
    http://www.bulletsandbones.com/GB/GBFAQ.html#recordcassette
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • I want to record my voice over a karoke track, how do I listen to the song while recording my voice simultaneously?

    I want to record my voice over a karoke track, how do I listen to the song while recording my voice simultaneously?

    What's your setup? Normally you hear all  tracks (that are not muted) in your headphones while you record a new one.

  • How Can I listen to the line-in on my T400?

    When I am at my desk, I've always had my satellite radio plugged into the line-in on my computer so that I can listen to it through the same speakers.  With my new T400, I have the radio's output plugged into the line-in on the Advanced Dock.  I know that it's getting a signal because if I record with Microsoft Sound Recorder, it records the radio.  
    How can I listen live to the signal coming into the line-in?

    You can thank Microsoft for this one.  They disabled the pass-through ability in Vista. Apparently too many people complained about feedback issues when trying to use webcams or VOIP programs and didn't know to mute the Line-In on the mixer.  It took me forever to find how to correct it.
    The following will enable the input sliders in your playback devices so audio pass through works without having to run through an application like it worked in XP. Remember, always backup your Registry just in case. I had to create new Keys for filter and SpeakerHp but yours may already be there
    1) Open regedit (Start->Run, type regedit)
    2) Navigate to HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE1031*8}\0000\Settings\filter\SpeakerHp\
    3) Create a new Binary Value
    4) Give it the name EnableInputMonitor
    5) Set it's value to 01
    6) Restart your machine
    7) Open your Playback Devices (right click on volume control icon in system tray, select Playback Devices)
    8) Open the Speakers/Headphones
    9) Go to the levels tab
    10) Unmute the input monitor
    T500 - P8600 2.4Ghz Core 2 Duo, Modded - 4GB Patriot DDR3 and 320GB Caviar Black 7200rpm drive with Ati HD3650 and Catalyst 9.6 modded drivers - Vista Business 32bit stripped down to bare bones with VM's from Ubuntu to Win7RC1 64-bit.

  • How to show more than one record at a form-like style report?

    Hi All,
    I developed a form-like style report
    I want it to show more than one record at once (At the same page)
    I tried that by setting the value to "Maximum records per page" property for the repeating frame to 10
    but when I close the property palete and open it agian the value is returned to 1 !!!
    how to show more than one record at the same page?????
    Thank u

    Hi,
    there's perhaps another property like "page protect". If than 2 records didn't fit at one page there's a page break. Or is there any object inside the repeating frame with page-break properties? Sorry .. it's like looking into a chrystal ball ...
    Regards
    Rainer

  • How to find the number of records per months  in cube

    Hi,
      how to find the number of records per months for my all cubes?
      Can i use the ListCube transaction to find totl number f records per cube monthwise ?
    Jimmy

    Hi,
    Here is a program to generate no of records and list of ODS and Cubes in Active version.Schedule this program in background and create a cube to load this information and schedule to the data from the file generated by the program. Schedule this all per you requirement.
    1.Copy the code into your Z<programname> from Se38.
    2.change the FILENAME in CALL FUNCTION 'GUI_DOWNLOAD' in the program to the location from where you can pick the information to load data to cube(eg Application server).
    3.Save program.
    4.Schedule the program in background as required
    5.Create cube with infoobjects to hold no of records and Infoprovider name
    6.Load this cube based on event after the program job is done.
    Hence you can report on this cube to see no of records in  CUBE or ODS in your box.
    Please find the code below.
    Cheers,
    Kavitha Kamesh.
    types: begin of itabs ,
          tabname type dd02l-tabname,
          end of itabs.
    data: itab type itabs occurs 0 with header line.
    data: counter type i.
    data: begin of itab1 occurs 0,
    tabname type dd02l-tabname,
    counter type i,
    end of itab1.
    DATA: ITABTABNAME TYPE STRING.
    DATA: LENGTH TYPE I.
    DATA: OBJECT(30).
    data: str(6) type c.
    select  tabname from dd02l into table itab where ( tabname LIKE  '/BIC/F%' or tabname LIKE  '/BIC/A%00' )
    and TABCLASS = 'TRANSP' and AS4LOCAL = 'A'.
    loop at itab.
      select count(*) from (itab-tabname) into counter.
      str = itab-tabname.
      if str = '/BIC/F'.
    LENGTH  = STRLEN( ITAB-TABNAME ).
      SHIFT  itab-tabname BY 6 PLACES LEFT.
    ELSEIf  str = '/BIC/A'.
      SHIFT  itab-tabname BY 6 PLACES LEFT.
      LENGTH  = STRLEN( ITAB-TABNAME ).
    LENGTH = LENGTH - 2.
    endif.
      itab1-tabname = itab-tabname(LENGTH).
      append itab1.
      itab1-counter = counter.
      clear itab-tabname.
      clear:  COUNTER.
    endloop.
    *********** itab1
    loop at itab1.
    write:/ itab1-tabname, itab1-counter.
    endloop.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
    *   BIN_FILESIZE                    =
        FILENAME                        = 'c:records.xls'
        FILETYPE                        = 'ASC'
    *   APPEND                          = ' '
        WRITE_FIELD_SEPARATOR           = ','
    *   HEADER                          = '00'
    *   TRUNC_TRAILING_BLANKS           = ' '
    *   WRITE_LF                        = 'X'
    *   COL_SELECT                      = ' '
    *   COL_SELECT_MASK                 = ' '
    *   DAT_MODE                        = ' '
    *   CONFIRM_OVERWRITE               = ' '
    *   NO_AUTH_CHECK                   = ' '
    *   CODEPAGE                        = ' '
    *   IGNORE_CERR                     = ABAP_TRUE
    *   REPLACEMENT                     = '#'
    *   WRITE_BOM                       = ' '
    *   TRUNC_TRAILING_BLANKS_EOL       = 'X'
    *   WK1_N_FORMAT                    = ' '
    *   WK1_N_SIZE                      = ' '
    *   WK1_T_FORMAT                    = ' '
    *   WK1_T_SIZE                      = ' '
    * IMPORTING
    *   FILELENGTH                      =
      TABLES
        DATA_TAB                        = itab1
    *   FIELDNAMES                      =
    * EXCEPTIONS
    *   FILE_WRITE_ERROR                = 1
    *   NO_BATCH                        = 2
    *   GUI_REFUSE_FILETRANSFER         = 3
    *   INVALID_TYPE                    = 4
    *   NO_AUTHORITY                    = 5
    *   UNKNOWN_ERROR                   = 6
    *   HEADER_NOT_ALLOWED              = 7
    *   SEPARATOR_NOT_ALLOWED           = 8
    *   FILESIZE_NOT_ALLOWED            = 9
    *   HEADER_TOO_LONG                 = 10
    *   DP_ERROR_CREATE                 = 11
    *   DP_ERROR_SEND                   = 12
    *   DP_ERROR_WRITE                  = 13
    *   UNKNOWN_DP_ERROR                = 14
    *   ACCESS_DENIED                   = 15
    *   DP_OUT_OF_MEMORY                = 16
    *   DISK_FULL                       = 17
    *   DP_TIMEOUT                      = 18
    *   FILE_NOT_FOUND                  = 19
    *   DATAPROVIDER_EXCEPTION          = 20
    *   CONTROL_FLUSH_ERROR             = 21
    *   OTHERS                          = 22
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

  • How to find the number of records in ods?

    how to find the number of records in ods?
    Pls suggest the solution apart going to the table of ods and seeing the number of records.
    Is there any program or function module to see the number of records in ods?
    For eg: SAP_INFOCUBE_DESIGNS is a program which gives the detail (number of records) of infocube.

    Hi,
    I was looking at this and found the following tables that may be of help.
    One of these tables will include a summary of the record count of all the tables in your system based on the last time each table had it's database statistics calculated:
    DBSTATTADA
    DBSTATTDB2
    DBSTATTDB4
    DBSTATTDB6
    DBSTATTINF
    DBSTATTMSS
    DBSTATTORA
    We run on an Oracle database so the table record counts can be taken from DBSTATTORA. Type in AZ in table selection field in SE16 to restrict the output to ODS (or DSO) tables only.
    The record count is at the time indicated in the timestamp field. Obviously this is not real time but should not be too out of date - if it is you may be having performance issues and should get your DBA / Basis to run a full refresh of DB stats.
    Hope this helps, alhtough not real time the table should give you a decent indication of the size of all your ODS objects (or any other table for that matter!)

  • My computer crashed necessitating re-install of op sys and all programs including iTunes. At the iTunes store when I click a song in my library get error message "can't find, do you want to search?" What's happening? How can I listen to my library on this

    My computer crashed necessitating re-install of operating sys and all programs including iTunes. When I click on a song in my library I get an error message "can't find this song, want to search?" What gives? How can I listen to songs in my library on this computer now?

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • How to find total no of record in cube

    Hi Experts,
    How to find total no of records in a cube.
    Thanks in Advance.

    Hi
    If you want total number of records in a CUBE then you have to check in both F Table and E table.
    Go to LISTSCHEMA tcode in your system, give your CUBE name and execute.
    You will fine two table E and F table
    goto SE16 -->give the table name and click on number of entries.You will get number of records.
    Check the below thread
    No of records in /size of Info cube
    Regards,
    Venkatesh

  • Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

    Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    Hi j2399123,
    It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
    Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
    For the QuickTime recording options, check out "Recording with QuickTime Player" in
    Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
    http://support.apple.com/kb/ht4024
    And for screen recording specifically, there's
    QuickTime Player 10.x: Record your computer’s screen
    http://support.apple.com/kb/PH5882
    Thank you for thinking of Apple Support Communities for your support needs.
    Nubz

Maybe you are looking for