How do i make a web object scrollable on a tablet?

i put a web object on a slide and i used the folder icon in the property panel to target a pdf file. when i run the course in my laptop browser, locally or from a web server, the web object scrolls as it should and i can read the entire pdf. but when i navigate to the course url with the safari browser on an ipad, the pdf is in a fixed position and does not scroll at all.
i'm using captivate8, the course was published for html5 only.
how do i correct this issue? thanks

when i put a web object on a slide and i used the folder icon in the property panel to target a ZIP file, which has an html page that wraps a jpg image, i experienced exactly the opposite... the web object scrolls the html page on the ipad, but not on my laptop.
when i put a web object on a slide and i used the folder icon in the property panel to target a OAM file, which was nothing but a jpg image imported into adobe edge and then published, the web object scrolled the "animation" on both the ipad AND my laptop
how do i avoid this odd behavior? thanks.

Similar Messages

  • How do you make a web browser?

    I would like to make a Web Browser of my own but how did you make FireFox?

    Read this:
    http://thepattysite.com/window_sizes1.cfm
    You don't want to try to launch your site to full screen,
    honest, as you'd
    drive your (potential) visitors away.
    Jo
    "Steve Zavodny" <[email protected]> wrote in
    message
    news:escrfa$s7$[email protected]..
    > How do you make a web browser launch your site to a
    specific size or even
    > full screen?
    > Thanks...

  • How do I make safari web page go direct to "Open pdf in preview" without having choose it manually

    how do I make safari web page go direct to "Open pdf in preview" without having choose it manually

    Well crap!  Internet explorer goes direct to actual pdf, would'nt you know it, safari wont!  I will have to change my pdf order form to include instructions on how to find that toggle thing at the bottom so it wont wig out safari users.
    Kind of *****, if people dont know they have to click the open in preview choice, my form wont work.
    Thought maybe it was an HTML issue that could be overidden.
    Thanks for your answer.
    LeeCM

  • How can I make my web page fill up the entire browser screen regardless of monitor it is viewed on,

    I have noticed that some websites are designed so that the page expands to fill in the entire screen, regardless of the size of the monitor. Here is an example: https://www.draft2digital.com/support/
    I have viewed the Muse tutorial that expands the Footer area to fill in the whole screen, but it does not address how to do this for the main part of the web page, or the header. I have looked at the site setup section and do not see where I could set it to expand.
    Any help would be appreciated.
    Thanks.

    Okay, in your link the blue bars would be in muse as a blue box then drag the right side so that it stamps just outside your page area. This will make muse program it so you will always see it extend to fill the browser window. Do the same on left side and you should be good. It will work even better if you also centre the rest of your content under page, page properties, padding - check the box for centre horizontally. Any content you want to extend with the browser, while the rest stays centred, you have to drag extending the content so it snaps just outside the main page in muse.
    Hope this helps.

  • How do I make a web page recognize an iPhone?

    I want to make my site recognize when someone browses it with an iPhone so I can redirect the iPhone users to a specific page. Anyone know how to do it?

    As an iPhone user, I see some sites that are doing this and I can't say that it's welcome. Knowing that the iPhone can view full web pages over a WiFi connection, I'd rather have a button on the main page for "mobile" instead of being shunted to the mobile site automatically.
    Right now, going to macnn.com reroutes me to macnn.com/mobile. It's well laid out and well intentioned, but if I want to surf the full site (which Safari would allow me to do), I don't have that option. I can understand how this was important for other mobile devices as their browser didn't even remotely give a true web experience, but for the iPhone, I feel it should be optional.

  • How do I make a web page that changes every time the user refreshes it? Is it possible in Muse?

    Hi, i'd like to make quite a simple website where the main text in the centre of the page changes every time the user refreshes the page in their browser. I assume i'll have to make one master, and multiple pages that are all the same except for the changes in the text, but i'm not sure how to make it so that every refresh directs to a different page and not just the home page? Is this even possible in Muse?
    This is an example of what i'm going for: :: procatinator ::
    Thanks!

    You can't do it with Muse alone. Would probably be fairly simple to do with a bit of Javascript. Check the widget directory as it is possible someone has made a widget for random content. If not, maybe I will make one this weekend. ;-)

  • How do I make multiple different objects look like they belong in another environment?

    For example, photos of city buildings put onto a green field. The colors do not match and the lighting is all wrong, im sorry if this is a really basic question to ask but please help, thanks!

    This is an example. I would like to make the color scheme a greenish post apocalyptic color. I'm not too sure how.

  • How can I make the web server work on port 80 and not 443. I can only access my website using https.

    On a Mac Mini server with OS X Lion 10.7.2, I am unalbe to get the web server working on port 80. It switches automatically to port 443 (https).
    This situation complicates the access to FileMaker Web publishing, as I don't want my clients having to use https.
    How can I change that? Does anyone know?
    Thanks for any reply

    in the server: I checked the SSL certificate. Tried several configuration.
    Well, that's a problem for a start.
    Your port 80 connection should NOT use SSL. Port 80 is the standard HTTP port, not HTTPS and most applications that connect to port 80 will not expect to use SSL
    If you want to run a site under both HTTP and HTTPS then you create two sites, one on port 80 without SSL and one on port 443 with SSL

  • How can i make a web VI using web UI buider

    Hi,
    I have installed a web UI builder and now i'm trying to get rid of it by going through tutorials.
    My biggest problem is i'm unable to understand the concept making web pages,
    And my+ requirement is I have a servo motor and by running this motor plots which are being made on a graph i want to display it in a web browser and anyone can see it without a control.
    Can anyone help me that how can i use WEB UI Builder efficiently to the above task.
    Regards
    Mangesh
    =========================================
    Please remember to accept a solutions and show your appreciation by giving Kudos to helpful messages...
    Mangesh D.
    CLAD | Project Engineer
    ==
    VIPM, LabVIEW 8.2, 2009, 2011SP1, 2012, 2012SP1, 2013, cRIO,cDAQ, PXI, ELVIS, Multisim, Smart Camera....
    Solved!
    Go to Solution.

    Thanx altenbach
    I don't have a evaluation copy of Web UI Builder and now with mty efforts i'm able to run my LabVIEW VI into web UI Builder by using web services.
    But the fact is i'm unable to build and deploy it( as it is only in full version). 
    My problem is by building and deploying my Web UI program what can i do with that.can i possibly publish it on Website i'm having?
    Regards
    =========================================
    Please remember to accept a solutions and show your appreciation by giving Kudos to helpful messages...
    Mangesh D.
    CLAD | Project Engineer
    ==
    VIPM, LabVIEW 8.2, 2009, 2011SP1, 2012, 2012SP1, 2013, cRIO,cDAQ, PXI, ELVIS, Multisim, Smart Camera....

  • How do I make a view object containing two entity objects updatable?

    I have a view object that contains attributes from two entity objects. The query looks like this
    SELECT AplCfgPartyEO.ID,
    AplCfgPartyEO.ID_HRM_BRW_JOB,
    HrmBrwJobEO.CREATED_BY,
    HrmBrwJobEO.CREATION_DATE,
    HrmBrwJobEO.ID AS ID1,
    HrmBrwJobEO.ID_HRM_BAS_JOB_TYPE,
    HrmBrwJobEO.JOB_NO,
    HrmBrwJobEO.MODIFIED_BY,
    HrmBrwJobEO.MODIFY_DATE,
    HrmBrwJobEO.ORIGIN,
    HrmBrwJobEO.PICTURE
    FROM APL_CFG_PARTY AplCfgPartyEO, HRM_BRW_JOB HrmBrwJobEO
    WHERE AplCfgPartyEO.ID_HRM_BRW_JOB = HrmBrwJobEO.ID
    My problem is that I am only allowed to update the attributes from the AplCfgPartyEO entity object while the attributes from the HrmBrwJobEO entity object become read only. I want to be able to update all of the attributes how do I do that?

    If someone will read this later I can inform them that I am using Studio Edition Version 11.1.1.0.2 at the moment. Thanks Chris, your answer solved my problem but I was a little surprised though that it wasn´t updatable by default.

  • Web app: How can I make a web app input form post directly to a sub category

    Please, how can I go about this? Some of the ideas coming to my head is to  replace the section I require with the  generated webapp input form code with this:
    <input type="radio" name="CAT_Category" value="{module_category, ID} onclick="javascript: return false;" >2013 /> // Not tested because am not sure of the markup
    Am I on point ? Or is there any other way I can get this done.

    I Trickster, pardon me if am not clear enough. But this is it. I have many BC Categories setup for different web apps. If you use the module {module_categorylist} only. BC will populate all the categories on the BC site, instead of a specific category  relevant to the web app. If it is {module_categorylist, categoryID}, you are telling BC to use the the categories in a specific category.
    When you say that you want to assign a web app item to a sub-category... do you mean the built in BC categories . I want to do this via the web app input form not through the admin.
    Do you have a top-level category that contains all the relevant sub categories that the user could use to classify/categorize the web app item upon submission?  Yea I have a top category that the user could use. It is this top-level category ID, I have used with the categorylist module.
    If you don't want the user to choose the sub-category themselves, how do you plan to derive the sub-category anyway? Thanks again Trickster. You have provided the solution to that with the hidden input field code you shared earlier. The sub-category has been pre setup as usual in BC and the sub-category ID would be used as you instructed in the code. This is intended for another web app that won't require users selecting a category. This is the example you shared:
    <input type="hidden" name="CAT_Category" value="my category ID"/>
    Using my example above I was able to test and have it working (using {module_categorylist} with the SELECT element) on a web app input form and when I submitted the new web app item it was classified in the category I chose. Yes Trickster, it works for me too that way. the web app item was classified perfectly, but if you go to your the web app item submitted at the admin-end, you will discover in that the category the user selected in the front-end is not selected, even though the item was classified
    I have highlighted it here: http://screencast.com/t/dwiXzBFXp
    The option selected  by the user is not captured. It often defaults to the 2012, even when the user selected 2013 and the item has been classified as 2013.
    I hope am more clearer. Thanks for all the effort.

  • How to I make a round object (something that is circular, without a white background)

    Hi - I'm trying to create a logo for a project, and I want the logo to be round. When I transfer the image to my website, it has a square box around it. How do I stop that from happening? The website will only let me upload .jpg and .png files.
    Thanks!

    It may be as simple as you have the background layer showing and not hidden when you save for web? If you have created your image/logo, assuming you have used something like the ellipse tool as suggested above and you have these items on a few layers, turn off  the background layer so you see the transparency grid behind your artwork and then save for web (Ctrl+Shift+Alt+S), you can then select png-24 and save. See below...

  • How can i make a Web application with listboxes as the column value

    Hi,
    I have two tables,one is employeees the other is devices.(Devices is the table for department notebooks).I want to implement an applicatiion for employees in order for them to book department laptops,so everyone will know which devices are in use and book the vacant notebooks.I want to make a view,such that it has a names column with static employee names and a devices column with list boxes for every employees such that they can select pre-registered notebook labels.
    Thanks for your help.
    Best regards,
    Edited by: ebaris on 13.Eki.2008 12:50

    Hi,hello, excuse the delay, the way is the following, I assume you have Application Express.
    In any page of your application click on List of Values.
    Click-on to create.
    Name-list: LOV_NAME.
    Select-type dynamics.
    With the generator creates the SQL queries.
    Click on creating Values list.
    Select the item you want to convert into a selection list (ComboBox).
    In the Show-like property, click on the Selection List.
    Click on the link LOV, select the list of values created.
    Apply changes.
    Roberto.

  • How can I make a web viewable version of the magazine I'm making in InDesign?

    I have found solutions for making tablet viewable versions of the magazine using the Digital Publishing Suite but our readers are older and want to view the magazine in a secured area on our website.
    I've tried interactive PDFs but not all browsers support in browser viewing of the pdfs and having readers download the pdf to view it is not acceptable. I've also tried exporting as a SWF file but the quality was a bit fuzzy, there was no option for zooming in and features like text searchability weren't available.
    It's looking like we will need to use a solution like Texterity but we'd rather do something in house, especially through InDesign, if there's a solution available. Anyone know of an option I could use?
    Thanks,
    Petra

    I'll think there was a missunderstanding. So i've made screenshots of the problem.
    Here in CS5.5:
    https://www.dropbox.com/s/bxwuqjh9n8a2nr7/Screenshot%202013-11-20%2009.09.54.png
    Here the same in CC:
    https://www.dropbox.com/s/8x9kfsmf1vlf7k3/Screenshot%202013-11-20%2009.09.38.png
    Sometimes I have to reconstruct old documents and have to make small modifications.

  • How do I make a hover object stay on screen?

    I have a CSS image gallery, and am struggling to finish it off (I originally intended to find a js example but couldn't find what I wanted despite extensive trawling). 
    Hovering over the thumbs brings up the large image as required, but I need the image to then stay on screen until the user hovers over another thumb.  I'm pretty sure this is possible, but can't work out how to do it.
    Here's the link:  http://www.stereosociety.com/lenegallery1979-2006.shtml
    Any help would be much appreciated!

    Start over with Fancybox.  It's very simple to implement.  See code below for a working example.
    <!doctype html>
    <html>
    <head>
    <meta charset="utf-8">
    <title>HTML5, with Fancybox2 Viewer</title>
    <!--[if lt IE 9]>
    <script src="http://html5shiv.googlecode.com/svn/trunk/html5.js"></script>
    <![endif]-->
    <!--LATEST JQUERY CORE LIBRARY-->
    <script src="http://code.jquery.com/jquery-latest.min.js"></script>
    <!--FANCYBOX plugins-->
    <link href="http://cdnjs.cloudflare.com/ajax/libs/fancybox/2.1.4/jquery.fancybox.css" rel="stylesheet" media="screen">
    <script src="http://cdnjs.cloudflare.com/ajax/libs/fancybox/2.1.4/jquery.fancybox.pack.js"></script>
    <style>
        margin: 0;
        padding: 0;
        -moz-box-sizing: border-box;
        -webkit-box-sizing: border-box;
        box-sizing: border-box;
    body {
        background: silver;
        font-family: Segoe, "Segoe UI", "DejaVu Sans", "Trebuchet MS", Verdana, sans-serif;
    #wrapper {
        width: 90%;
        margin: 0 auto;
        background: #FFF;
        overflow: hidden;
    /**left sidebar**/
    aside {
        float: left;
        width: 25%;
        border-right: 1px dotted #999;
        min-height: 400px;
        padding: 2%
    /**this styles image container**/
    #thumbs {
        float: left;
        width: 75%
    #thumbs li {
        list-style: none;
        float: left;
        width: 160px;
        margin: 10px 1% 0 1%; /**space between containers**/
    /**recommend using same size images**/
    #thumbs img {
        width: 160px; /**adjust width to thumbnail**/
        height: 120px; /**adjust height to thumbnail**/
        opacity: 0.75;
    #thumbs img:hover { opacity: 1.0 }
    /**float clearing**/
    #thumbs:after {
        content: ".";
        clear: left;
        font-size: 0px;
        line-height: 0;
        display: block;
        visibility: hidden;
    </style>
    </head>
    <body>
    <div id="wrapper">
    <aside> Left Sidebar </aside>
    <h1><a href="http://fancyapps.com/fancybox/">Fancybox2</a> Image Viewer</h1>
    <!--insert thumbnails with links to full size images below-->
    <ul id="thumbs">
    <li><a class="fancybox" data-fancybox-group="gallery" href="http://placehold.it/400x320.jpg" title="optional captions"><img src="http://placehold.it/160x120.jpg" alt="Thumbnail" /></a></li>
    <li><a class="fancybox" data-fancybox-group="gallery" href="http://placehold.it/400x320.jpg" title="optional captions"><img src="http://placehold.it/160x120.jpg" alt="Thumbnail" /></a></li>
    <li><a class="fancybox" data-fancybox-group="gallery" href="http://placehold.it/400x320.jpg" title="optional captions"><img src="http://placehold.it/160x120.jpg" alt="Thumbnail" /></a></li>
    <li><a class="fancybox" data-fancybox-group="gallery" href="http://placehold.it/400x320.jpg" title="optional captions"><img src="http://placehold.it/160x120.jpg" alt="Thumbnail" /></a></li>
    </ul>
    <!--end thumbs-->
    </div>
    <!--end wrapper-->
    <!--FancyBox function code-->
    <script>
    $(document).ready(function() {
        $('.fancybox').fancybox();
    </script>
    </body>
    </html>
    That's all there is to it.
    Nancy O.

Maybe you are looking for

  • I followed the instructions for restoring bookmarks from an older Firfox to a new one but it doesn't work.

    I'm trying to get my old bookmarks installed with Firefox on a drive holding Win xp to Firfox installed on a different drive holding Win 7. I followed the backup and restore process in the Firefox help file but it doesn't work. Help will be appreciat

  • What auth obj to use for allowing user to create and save workbook?

    Hi all, We are on BI 7.0, we have requirement which will allow users to develop and save workbooks (NOT BEX query) via BEx Analyzer. I have examined the auth obj S_RS_WKBK but it is obsolete auth obj and there is nothing similar obj in BI 7.0. i then

  • Syntax within the from Clause

    In the following SQL SELECT statement, what does the px-granule(0, block_range, dynamic) in the FROM clause reference. This select statement was copied from the sql analyze tool within OEM 2.2. SELECT /*+ Q524000 NO_EXPAND ROWID(A1) */ A1."PROCESSING

  • Excuting stored procedure remotly from SQL Server

    Hi everybody, H recive an error message when I try to execute a remote stored procedure on Oracle from SQL Server though a linked server of ME OLE provider for oracle. I can view all of the Oracle tables and views within SQL Enterprise Manager. When

  • Format type error

    I'm trying to use Dreamweaver CS3 to change the date format on a date but nothing changes when I click a format. Also I tried the Edit Format List and when I click the + to add a new format I get an error "Cannot find format type Date/Time". Any clue