How do I make multiple videos on one slide play in full screen when selected?

I want to put four short videos per slide and have each play in full screen when I click on them. How can I do this? Thanks

I've figured out to hyperlink to the video in a different presentation, which works. BUT how do I end back on my original slide?

Similar Messages

  • Multiple videos on one slide

    i finally got a video to play within my keynote (for iPad) slide. *not full screen, but within the design.
    my problem is that i want to have 3 tiny videos playing at the same time, each about 175px x 90 px tall.
    What's happening is that the first video appears and plays.  But when the second video appears and starts to play the FIRST video stops. Then when the third video appears and plays (and loops) while second stops and the first remains stopped.
    I'd like them all three to play and loop simultaneously. This works on the mac side. Could it be a limitation of the iPad hardware?
    I'm open for suggestions.

    The same problem... I dont know what to do... :-(

  • Do I make multiple videos in one project or make multiple projects??

    I am going to make at least three music videos for a local band for their web site. Do I make all three in one project and can i encode them for YouTube separately or do i do all three in totally separate projects??? It seems like once i have all the footage and audio loaded in a project and do one video to upload to YouTube then to do another video i have to load all that raw footage and audio all over again for the next video and then for the third video.... seems like once all that is loaded into a project i could just separate the videos for a few seconds and do another and then another, but how then to send them to YouTube separately???
    Or if i do all three in separate projects how can i combine them into one project to export in DVD quality for the band to use for promo???

    Personally, I would break the Project into three, discrete Projects, but you do have a point about the Importing of the Assets.
    You can certainly do this with one Project, and then Export/Share segments of it with the WAB (Work Area Bar). Here is a look at the WAB from an earlier version of PrE:
    As I do not upload to YouTube, I cannot tell you if you can use the WAB, when you do the direct Export/Upload. You may have to do an Export/Share for the individual segments, and then manually Upload each. Others can shed more light on this aspect.
    Good luck,
    Hunt

  • How do I make a video on one track expand in size over a video on a second track? Elements 11

    How do I make one a video on one track expand in size over a video on a second track?
    Thanks.

    Sminty
    Thanks for the follow up with additional very helpful information.
    What you need to do is to keyframe the Motion Scale property so that it changes over the duration of the whole photo
    rather than  Scale being applied to the whole photo uniformly.
    Two ways you could do the keyframing of Scale..
    a. from the Timeline
    or
    b. from Applied Effects/Applied Effects Palette/Motion Panel expanded and its Scale Property there, using Toggle Animation to initiate the process.
    For now, I will describe "b"
    Your scaled down image on Video Track 2
    Your regular image on Video Track 1
    Your Timeline Indicator at the beginning of the Timeline.
    Select/Highlight the image on Video Track 2, go to Applied Effects Tab/Applied Effects Palette/Motion Panel Expanded and its Scale Property
    That area should look like
    You get an abbreviated version of the above screenshot if you do not hit the Show/Hide Keyframe Controls icon. With it opened, you will see the actual keyframes being placed.
    With your Timeline Indicator at the beginning of the Timeline and Video Track 2 Image selected, click on the Toggle Animation Icon. That will set the Scale property keyframes
    which at that time will be at a value less than 100% because you are starting with a scaled down Video Track 2 Image.
    Then move the Timeline Indicator to the last frame of the clip. Then move the Scale slider to 100% or whatever % gives you Video Track 2 Image just to full frame so
    that you do not see the Video Track 1 image. Render the Timeline by pressing of the Enter key of the computer main keyboard or pressing the Render button above
    the Timeline.
    All sorts of things can be done by keyframing a property. The property could be other than Scale (some examples might be Position, Opacity, certain effects applied
    to Timeline content, etc.)
    Please review and consider and then let us know if that worked for you. Do not hesitate to ask for clarification if needed.
    Thank you.
    ATR

  • How can I make multiple computers share one iBooks library?

    I have several computers with which I sync my iPad.  I loaded a bunch of PDFs into iBooks onto my iPad from one of them *but* the PDFs do not show up in the iBooks library on the other computers.  If I click on "Sync Books" on one of hte others it asks me if I want to remove all the existing books on the iPad which I most certainly do not.  How can I keep the iBooks library in sync on these multiple computers?

    Books and pdfs aren't synced.  Bookmarks, highlights and collections can be synced across devices. pdfs downloaded onto an iPad can be transferred to a computer when connected using the USB cable.
    iTunes Store: Transfer purchases from your iOS device or iPod to a computer

  • How can I make multiple quizzes within one Captivate project?

    Hi guys! Really liking Captivate 5.5, especially the way random question slides can lift questions out of a question pool...very elegant!
    Sadly though, I've come up against a bit of a wall. In my project, I want to have 3 separate quizzes that all use the same question pool; a 10, 30 and 50 question-long quiz. Each one needs to have its own results page.
    It's easy enough to see what I mean by looking at the screenshot below:
    The idea was to have about 105 slides in total, with slides 10 - 20 being the 10 quiz slide, 21 - 51 being the 30 question quiz and 52 - 102 being the 50 question quiz.
    There are three invisible buttons placed over those 10, 30, 50 text boxes. In the picture, the '10 question' button would jump to slide 10, the '30 question' button would jump to slide 21, and the '50 question' button would jump to slide 52, jumping the user to the start of their designated tests.
    Though I can create the 10 random question "block" easy enough, when it comes to adding the 30 question "block" it just adds the new random questions to the existing random questions. I want three separate quizzes, each with their own results screens please. (I don't want to daisy-chain to external projects, because the results of each test need to be used within the homepage.)
    It just adds them on to the existing block!! Argh!!
    Little bit ticked off with Adobe...the reason their products are so incredible is because they put no constraints on the user, and you can use their tools to create things even the developers never dreamed of. Like in Photoshop for example, I bet when the dropshadow fx was created, the developers never realised that it would be used to give a metallic 'stamped' look to text by turning it to white and applying it just inside the text.
    Captivate, though amazing most of the time, has a nasty habit of stomping on my toes. You can't set grade boundaries and have quizzes give out grades A+ to F- for example. You can only have 'pass' and 'fail', thus making it rather pointless for use in schools, contrary to how the program is advertised. Another example would be when I wanted to create a replay button. I thought that a button that jumped to the slide it was on would be a simple, no-BS replay button, but for some reason you can't make a button jump to its current slide. I downloaded a widget that worked in the end, but I wish Adobe would get off my back and let me do what I want!
    Anyway, if you could help me out here it would be grand

    I must say I have a little sympathy for the Captivate developers on this occasion.  As you say, they've created an application that does so much, that when you eventually run into a hard boundary of some kind, the effect is somewhat jarring.  However, every application, no matter how good, has limits.  I'm probably one of the worst offenders when it comes to asking the Adobe Captivate Development Team for enhancements (I think I've logged over 70 enhancement requests for Captivate 6 alone).
    In your case, you want to have three different quizzes in one project file, each with it's own separate Quiz Results page.  Lilybiri's blog explains how to set up your own faux Quiz Results pages using system variables and custom user variables, but you're going to find this to be quite a lot of trouble.  Even if YOU want to consider these as three separate quizzes, as far as Captivate is concerned they're just one big quiz with 50 questions.  So Captivate will calculate it's internal results based on a 50 question quiz, even if your users select the 10 question version.  So achieving a final Pass/Fail result is going to be problematic at best.
    As Lilybiri suggested, your better strategy would be to break this up into separate modules so that you can get your three separate quiz results (all done in standard Captivate) as well as correct results based on the actual number of questions done by the user.
    As far as grades A-F is concerned, there's nothing to stop you from using Advanced Actions and User Variables to calculate the user's score as a grade.  You need a user variable that stores the user's grade (e.g. var_Grade). And you need a fairly complex Conditional Advanced Action (e.g. caa_CalculateGrade) with several clauses each of which goes something like:
    If
    cpQuizInfoPointsscored is lesser or equal to [highest score for a particular grade]
    AND
    greater or equal to [lowest score for a particular grade]
    Actions
    Assign var_Grade with [the appropriate grade for that range of scores]
    Your conditional action will need one of these clauses for each separate grade.  Once your variable has been assigned a grade based on the user's score, you can display it in a text caption somewhere on the quiz results page or on a slide thereafter with suitable commendations/ commiserations.

  • How do you add multiple videos to one single timeline in encore cs6

    please need assistance, i have 10 separate video files that i am trying to burn onto as few of dvd dl's as possible

    I would either put each video on its own timeline or use Premiere to edit them together. Often adding more than one video to a timeline in Encore does not work.

  • How do i put multiple pictures on one slide in the slideshow module?

    The lightroom slideshow module appears to only allow one picture or one video per screen.  I would like to put everything within one folder (usually 4 pictures) on one screen.  any way to do this?  Does anyone know software that will do this if lightroom doesn't?  Thank you!

    You could do this with Photoshop or using just Lightroom you could "print" mulitiple pictures to a jpeg file and then import the jpeg for your slideshow. Look under Print Job near the bottom of the print screen and choose jpeg file for Print To.

  • On my new 4S, how do I get my contact pic to display on the full screen when that contact calls?  Now it displays as a thumbnail on the banner

    Right now when someone calls that I have a contact pic set for, it shows as a thumbnail on the right side of the banner (right corner of screen).  I want it to come up on the whole screen like I see other iphones do.  I was told at first that this happens when I use a pic not taken with my phone, such as an uploaded pic from my pc.  This is not the case, the only 2 that I have tried to do were pics taken with the iphone.  Can someone help me to get this corrected?  I have spent over 2 hours with verizon, they cannot figure it out and I also have a senior technical advisor at Apple trying to figure it out, but I am curious if anyone has come across this with the new 4S and how they fixed it.  The senior apple advisor thinks it has something to do with syncing my contacts through itunes or google.

    russellfromblackburn south wrote:
    Is it because the portable drive is NTFS format and the Mac wont recognise this? If so what do I do?
    Yes, this is exactly what is causing the problem. Macs cannot write to NTFS formatted drives, only read. You must move the documents to the internal HDD/SSD of the Mac to be able to edit them.
    Or, since you say you don't want to move the documents to the internal storage, you'll need to format the external HDD as FAT32.

  • I need an idea how to place multiple videos on one page

    Multiple videos on one page in Muse neded for a video portfolio..
    Anyone got a great idea how this can be done please. (or direct me to a tutorial link - doing one is all I can find)
    I am happy with either embedded or Menu linked on objects to videos.
    Youtube is hosting the videos
    I just cant find any way to put hyperlinks or urls in objects and I can not find a way to make small video players in Muse.
    If I scale the container ..things go very weird. eg the video goes tiny and into a corner.
    I feel like I am working with half a tool box!!!
    I cant even find a template where this has been done.
    Any help is appreciated. Thanx.

    That works perfectly thank you.
    Now I am wondering if I can have a single "viewer" that will play any selected video from a button , a menu or other trigger?
    Info for others if required. :  The You tube ID required in the widget setting is not the URL.  Its an alpha/numeric obtained from part of the YT embedding code.
    example - the bold underlined section
    <iframe width="720" height="405" src="//www.youtube.com/embed/w6ZcCOCihuY" frameborder="0" allowfullscreen></iframe>

  • How do I make multiple movies look like one?

    I created a demo of 136 slides with mostly screencaps and one
    small flash animation. The final published flash file is
    approximately 30MB. When the demo is run on multiple computers, the
    CPU utilization rises up to almost 100%, this makes the demo run
    very slowly on most computers. I was advised to cut my captivate
    movie in half ( in slides)... however even then the CPU utilization
    is quite high. How can I break my demo into multiple linked movies
    (to bring down the file size) but still have it play smoothly
    without it stopping to load after each new movie? How do I make
    multiple movies look like one?
    Thank you.

    Would it work to make the navigation of the page go to the
    next movie?

  • How can I have multiple users on one apple id?

    How can I have multiple users on one apple ID?
    ie: I have my apple ID with my own credit, how can I set up credit for my son under the same apple ID, so that he can still access the same apps I've already downloaded and paid for?

    I've been trying to figure out a clean way to do this too. I think you may need more than one Apple ID – one that is shared and used to purchase "sharable" items and then "individual" Apple IDs for you and your son. That's the idea that I'm pursuing for the moment.
    It seems that there must be a way to do this, App Store purchases for the Mac are licensed across multiple machines. iPhone app purchases have "all your devices" licensing. Makes me think that Apple has a process in mind for sharing an account (or associating a device with multiple accounts).
    Other things I've learned:
    - Apparently you can't merge Apple ID accounts. I asked about this once at an Apple Store and was told that there was no way to do it.
    - If you share an Apple ID the Messages app behaves in a somewhat surprising manner. It must use your Apple ID to decide where messages should be sent because all users get all messages. This can make it very hard to organize a surprise party :-)

  • How do I scan multiple pages into one document?

    How do I scan multiple pages into one document?
    HP Photosmart 5514-e-All-in-One Printer B111h
    Model CQ 183 A

    Hi,
    Have you tried this (using PDF format).
    Launch the scan from the HP Solution Center
    Click Change Settings.
    Select the desire Scan Shortcut, then click Save to file save options
    Make sure Create One File per scanned page... is Unchecked, Approve and perform the Scan.
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I scan multiple pages into one document using the CanoScan LiDE 200?

    How do I scan multiple pages into one document using the CanoScan LiDE 200?
    I can't seem to find a way to get them to scan continuously, or a way to stitch them together afterwards.

    Hi dagda24,
    You can scan multiple pages into a single document with the scan to PDF option.  Use the following steps to do so:
    1.  Open MP Navigator.
    2.  Click One Clcik.
    3.  Click Save to PC.
    4.  Change the File Type from PDF to PDF (multiple pages).
    5.  Make any other changes as needed, then click scan.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Controlling multiple videos with one set of controls

    I'm currently working on a project that allows the user to view multiple videos at one time. The videos will be exactly the same length and video format/type. I'd like to let the user use just one set of controls to view each video. Is this possible? If so, does anyone have any code samples?
    I also want the video to not start when the application starts. I've got that done, but I'd also like the first panel of the video to be displayed. How can I do that?
    Thanks!

    PS, I'd also prefer for the controls to be detatched from any of the viewers, if possible. Thanks!

Maybe you are looking for

  • Brand new ipod touch suddenly stopped working. please help!

    I was messing around on my brand new ipod touch and it suddenly crashed. it flashed a static-y black and now the screen is bluish white and won't change. I tried holding both the home button and the black button on top of the ipod and neither helped.

  • 10.3 and 8.1 at the same time

    I'm trying to run 10.3 and 8.1 at the same time and have had no luck so far. I have: installed 10.3 in a new directory, C:\bea103 I'm running 8.1 in the default C:\bea changed the point base ports in 8.1 changed the http/https ports in 8.1 to 8001/80

  • Region Source - Dynamic Where Clause

    I cannot find anyway to call a function to dynamically generate a where clause for a SQL Query for the region source. For a given set of html text input types. The where clause builds is build based on the populated values of the textfields, if they

  • Apple Sync Notifier.exe Bad Image  icuin36.dll

    I get a Popup at Startup Saying "The Application or DLL C/Windows?System32/icuin36.dll is not a valid Windows image. Please check this against your installation diskette. The problem started when I upgraded Itunes from 9 to 10. I reinstalled and stil

  • My IPhoto turns off when trying to preview my photobook. Please HELP!!!

    I have lastest software and download. It's IPHOTO 9.1.5. And I don't know why Iphoto crashed when trying to preview or save my Photo Book I am working ok. I need help since I can't send it to print! Thanks!!! Here you have the "explanation" Process: