How do I merge TB data from a dead Win 7 computer to a new Win 8.1 computer with TB installed?? The old HD is good and old files are available.

My old Win 7 computer died.
I bought a new win 8.1 computer.
I pulled the HD from the old computer and put it in a SATA/USB case. Everything is there.
I installed T-Bird on the new computer and downloaded current e-mail.
Now I want to merge the thousands of old e-mails that were on the old computer onto the new computer?
What steps should I take?
If necessary, I could live with losing the new e-mails that are now on the new computer.
John

http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Thunderbird
But first save your new inbox, just make a copy outside your profile of
"profile" \mail\"mailaccount"\INBOX (pop-account) or
"profile" \Imapmail\"mailaccount"\INBOX (IMAP-account)
You can then import or move it to your local folders. (under a new name)

Similar Messages

Is it possible to transfer data from a dead macbook pro to a new user account on another macbook pro?

I have killed my 2 months old mbp (water). I have an older mbp (2 years old) that I wish to transfer all data from my dead mbp to. I was hoping that I simply could create a new user on my old mbp and transfer all data to this account using the migration assistant and thereby re-create my dead mbp. Especially I wish to acces my contacts, mail settings and calendar, but would of course prefer to acces all files. I have a thing (do not know the right term) that can read the HD on the dead computer. It is now connected to my mbp, and I can acces data, but the migration assistant do not recognize it. Can someone please help me?
Thanks...

It's possible that the water caused your hard drive directory to be corrupted when the logic board shorted out. You may want to try repairing the now-external drive with Disk Utility's Repair Disk routine. If it reports making any repairs, run it repeatedly until it reports that the disk "appears OK". Then try Migration Assistant again.
If that fails, then perhaps the disk itself was damaged by the spill. You could go one step farther and try using data recovery software on the drive:
http://www.prosofteng.com/products/data_rescue.php
http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
http://download.cnet.com/VirtualLab-Data-Recovery/3000-2094_4-10298807.html
All three recovery utilities come in demo versions that will show you what the full version could recover before you have to pay for anything.
Good luck.

How do i rescue my data from a dead iphone 4?

how do i rescue my data (photos, contact, etc) from a dead iphone 4?

chan327 wrote:
... any other way to restore them?
Not if they only exist on the " dead Phone..."

How do I copy my bookmarks from Safari on my iMac to my new iPhone 6?

How do I copy my bookmarks from Safari on my iMac to my new iPhone 6?

Hello!
Here is the manual. iOS: How to transfer or sync content to your computer - Apple Support
- Note that the manual presupposes you have Mountain Lion installed on your Mac, which is what it says in your message, so I'm assuming you have.
Also, I suppose you're not using iCloud. If you ARE using iCloud on your Mac and iPhone, I recommend using that for your bookmarks over USB-syncing. Here's the manual for that: iCloud: Troubleshooting iCloud Bookmarks and Reading List - Apple Support
The relevant excerpt:
Turn iCloud Bookmarks off and back on:
Quit Safari.
Choose Apple () menu > System Preferences, then click the icon for iCloud.
If you are using OS X Mavericks or Mountain Lion, deselect the checkbox next to Safari. If you are using OS X Lion, deselect the checkbox next to Bookmarks.
Close System Preferences and wait about a minute.
Open System Preferences and choose iCloud.
Select the checkbox next to Safari (or Bookmarks). Click Merge.
Close System Preferences.
Open Safari and test to see if the issue is resolved.

How can I transfer outlook data from Ipod to new hard drive?

My hard drive had to be replaced last week. Although my music was backed up by Norton 360, my Outlook contacts and calendar were not backed up. How can I transfer my data from my Ipod to my new hard drive? I am running Windowa XP, if that matters. Will a sync to Itunes destroy all my data on my Ipod?

You would need to enter at least one unique contact and calendar entry on the new computer, then when you first sync you should get the option to merge the data.

After a Lion clean install, how do I retrieve my data from external back-up? Following Apple advice for use of Migration Assistant did not work creating similar issues leading to clean install.

After a Lion clean install, how do I retrieve my data from external hard drive?
Following Apple advice I used Migration Assistant which crashed new system twice which is why I had to clean install Lion in the first place.
Is there a sure way of doing it?
I have only a few programs that I will have to install myself and that should not be a problem.
I just want my data, music and photos back where I can use them.

Time machine backups. I went to migration assistant a few hours ago and limited my selection to "users", no need for applications, settings and other files. Stuff started moving over at a fast pace but has now seemed to stall.
I will let it run overnight as there are lots of songs and photos as well as a few movies.
If that does not work, then I will go into TM and try restore. I have restored some things in the past such a mail files and it has worked well.
The Apple fellow at the store told me to go right into TM, he may have had a point. I'll get it eventually.

I have hierarchy data in R/3 side how will i load that data from R/3 to BW

Hi all,
i have my hierarchy data in the R/3 side how will i load that data from R/3 to BW side
Regard
Kiran Kumar

Hi Kiran,
Here is the procedure:
1.      In the Data Warehousing Workbench under Modeling, select the InfoSource tree.
2.      Select the InfoSource (with direct update) for the InfoObject, to which you want to load the hierarchy.
3.      Choose Additional Functions® Create Transfer Rules from the context menu of the hierarchy table object for the InfoObject. The Assign Source System dialog box appears.
4.      Select the source system from which the hierarchy is to be loaded. The InfoSource maintenance screen appears.
○       If the DataSource only supports the transfer method IDoc, then only the transfer structure is displayed (tab page DataSource/Transfer Structure).
○       If the DataSource also supports transfer method PSA, you can maintain the transfer rules (tab page Transfer Rules).
If it is possible and useful, we recommend that you use the transfer method PSA and set the indicator Expand Leaf Values and Node InfoObjects. You can then also load hierarchies with characteristics whose node name has a length >32.
5.      Save your entries and go back. The InfoSource tree for the Data Warehousing Workbench is displayed.
6.      Choose Create InfoPackage from the context menu (see Maintaining InfoPackages). The Create InfoPackage dialog box appears.
7.      Enter the description for the InfoPackage. Select the DataSource (data element Hierarchies) that you require and confirm your entries.
8.      On the Tab Page: Hierarchy Selection, select the hierarchy that you want to load into your BI system.
Specify if the hierarchy should be automatically activated after loading or be marked for activation.
Select an update method (Full Update, Insert Subtree, Update Subtree).
If you want to load a hierarchy from an external system with BAPI functionality, make BAPI-specific restrictions, if necessary.
9.      If you want to load a hierarchy from a flat file, maintain the tab page: external data.
10.      Maintain the tab page: processing.
11.      Maintain the tab page: updating.
12.      To schedule the InfoPackage, you have the following options:
○       (Manually) in the scheduler, see Scheduling InfoPackages
○       (Automatically) using a process chain (see Loading Hierarchies Using a Process Chain)
When you upload hierarchies, the system carries out a consistency check, making sure that the hierarchy structure is correct. Error messages are logged in the Monitor. You can get technical details about the error and how to correct it in the long text for the respective message.
For more info visit this help pages on SAP Help:
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6729e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/3d/320e3d89195c59e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6729e07211d2acb80000e829fbfe/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4dae0795-0501-0010-cc96-fe3a9e8959dc
Cheers,
Habeeb

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

So what is your question?
If you forgot your encryption password:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from here:
http://support.apple.com/kb/HT4946

How do I transfer all my data from my Time Capsule 2TB to my new Time Capsule 3TB?

How do I transfer all my data from my Time Capsule 2TB to my new Time Capsule 3TB?

Click here and follow the instructions to move a Time Machine backup, and just drag-copy everything else.
(113074)

How do I transfer all my data from my original iPad 1 to my new iPad Air?

How do I transfer all my data from my original iPad 1 to my new iPad Air?

Do a full sync and backup of your one. I use iTunes for all my backing up. Then unplug the one and plug in the Air. Go through the setup process and when you have the choice to 'set up as new or restore from backup' chooose the the restore and your air will be a near clone of your One. You will need to reset up wifi and website passwords, but the data should be there.
Once you are sure the Air has all you need on it, you can go into the settings and 'erase all content and settings' which puts your One back to the 'out of box' state to you can sell it if you want.

How do I include/show data from a child table in a Modal Window?

How do I show data from a child table in a Modal Window?
I have an application where each customer might have multiple addresses and phone numbers which are stored in child tables. When I show the customer in a record on a screen I can place a Modal Window button on the screen which can be pushed at runtime
to display detail information for the particular customer parent table which works great. However, I would also like to display the data from the address and phone number child tables. Is there a way to do that? Or can I just launch a hole separate screen
which would automatically display the needed data for the particular customer? If yes, how?
Thank you for any help.

I am not even sure how to describe my situation in such a way that this forum incident would be of benefit to other people as I think it is fairly unconventional.
The “add contactaddress” link does not show up on the right.
The contactaddress table is a child of the contact table.
The contact table is a child of the contactlink table.
And the contactlink table is a child of the person table.
I have it set up this way because the contact in the contact table may be a contact to multiple persons in the person table and I do not want to re-enter the contact info every time the contact is used.
In the list detail screen of the person table I can see the contactlink child collection so that I can see the name of the person in the contact table at runtime. However, the contactaddress collection is not related to the person table so it does not show
up on the right hand side of the design screen as an “add contactaddress”; nor is there “add contact” link.
What I would like to happen during runtime is that it is not necessary to switch screens from the person list detail screen to a contact list detail screen to see the addresses and phone numbers for the contact.
Is my setup unnecessarily convoluted? Is there a better way? Please see the two snapshots below.
Perhaps there is a way to call up a Detail screen from the List Detail at runtime?
Anyway, if you are still reading, thank you very much for your help.
jjjjj

How to access internal table data from webdynpro to Flex application.

Hi Connoisseur
The data transfer from Abap WebDeypro to flex island works well. I followed , there is an example from Thomas Jung (by the way as always Great Work) and Karthikeyan Venkatesan (Infosys) but this example covers simple type only.
There is no example with complex types like arrayCollection which handle the transfer of data from flex to WebDynpro.
i tried to do pass internal table value to flex-datagrid.but its not work.
i would like to know
1.how to access internal table data from webdynpro to Flex application.
2.how to pass the internal table to flex-datagrid.
2.how to pass dynamically in ADOBE flex.
3. how to do Flex is receiving the wd context data?
4. how can we update WD context with FLEX data.
Ple give me sample example and step by step procedure.
Regards
laxmikanth

Hi Laxmikanth,
Please refer this...
Flash island: update complex type from flex
Cheers..
kris.

How can i recover my data from an old hard drive after replacing it?

How can I recover my data from an old hard drive after replacing it?

Internal or external hard drive? Was the drive still working before you replaced it?

How do i transfer all data from 4s to 6 ?

how do i transfer all data from 4s to 6 ?

If you have a computer with the current version of iTunes you can connect your iPhone 4s to your computer via the USB charging cable. You would then Sync / Backup your iPhone 4s to that computer via iTunes. After a successful backup is created you can then connect your iPhone 6 via the charging cable to the computer and iTunes and Restore that Backup to the new iPhone. You can always download any Apps you have purchased at no charge. If you don't have a computer / iTunes you can backup your iPhone 4s via WiFi and the Cloud. Then you can download that Backup to your New iPhone. This may be more difficult due to memory constraints on your iPhone.

How do I transfer all data from my old internal hard drive to a new internal hard drive

How do I transfer all data from my old internal hard drive to a new internal hard drive? I have an iMac with a 320gb internal HD that is full and I am replacing it with a 2tb internal drive. I have several external drives; 1 tb, 2tb and 3 tb. The 2 tb is being used for Time Machine. Do I have to buy an enclosure? If so, where would I get an inexpensive one?
I also want to partition the new internal drive for Windows, and I'm not sure how much space to use for that. I plan to use Windows to check my work in PowerPoint created on my Mac for clients on PCs.

Do you already have Time Machine making backups onto the 2TB drive? If so, after you get the internal drive replaced, boot up into the recovery partition (hold down ⌘R) and restore the latest Time Machine backup that you have onto the new internal drive.
I recommend always having two backups. I'd use SuperDuper to make a complete clone of your internal drive onto an external drive in addition to having the Time Machine backup.
Boot Camp is what is used to make partitions for Windows. How much space to allocate depends on how much space you expect Windows to use up based on how you plan to use it.

How do I merge TB data from a dead Win 7 computer to a new Win 8.1 computer with TB installed?? The old HD is good and old files are available.

Similar Messages

Maybe you are looking for