How do I MIDI control Waves GTR3 stomps with a StealthPedal in Logic 9?

I'm trying to get Waves GTR3 stomps working within Logic 9 (9.1.6) using my StealthPedal as the external MIDI controller. The OS X is 64-bit (10.6.8) and Logic 9 is brought up in 32-bit mode. If I use the pedal with the standalone GTR3, all works as expected but within L9 I cannot get the ''Learn'' function to work - if I bring up Amplitube 3, everything works as expected, but with GTR3 the Learn will not appear using ctrl-click. I am bringing up GTR3 as an AU MIDI-contolled effect in L9 as I do with Amplitube 3 or any other plug-in I want to control externally - for audio I go through a side-chain to incorporate an audio channel.

Simple answer from Waves:
The MIDI function of the GTR will not work properly (or at all) in Logic.

Similar Messages

  • HT204266 is wave burner included with the download of Logic Studio from the app store?

    is wave burner included with the download of Logic Studio from the app store?

    Hi HandletheTruth.
     I will be able to assist you.
    The MF Toolbox 4.9 software supports scanning in the document using OCR processing; however, you will need a separate OCR software that will allow you to edit the software.
    I hope this information is helpful to you.  Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • No midi control in GB '08 with keyboard via Alesis io2, & no output via io2

    The lengthy title sums up the two key issues I'm having.
    I'm using an Alesis io2 USB interface, to run guitars and midi controller keyboards (goldstar MK49 & Terratec Midimaster Pro) into GB '08.
    There're no problems getting the guitar into GB and my Guitar Rig 3 plugin, and no noticeable latency on monitoring via the system output (active speakers from headphone output). Until three days, ago I was also using the keyboards to successfully control software instruments in GB.
    In detail, the issues I'm experiencing are:
    *1) MIDI Keyboard*
    After attempting to create a new aggregated audio/midi device in the Audio Midi Setup utility, I can no longer get the keyboards to work. I get intermittent notes at random and also when using the keyboard data sliders, but mostly silence. Previously I had no problems with velocity sensitivity, note, modulation, pitch or track level control. Now, I'm getting nothing other than random notes.
    It appears that GB, my MacBook or both are now unable to make any sense of the midi data they're receiving. I've deleted the aggregated device via the same utility but still no control. I've not yet found a 'MIDI reset' option in system prefs or the audio/midi utility. Any suggestions how I get my bits of gear talking to each other again?
    *2) Audio output via Alesis io2*
    SInce getting this USB interface I have been unable to route any audio back out of my MacBook through it; either to headphones from the built-in headphone jack, or monitors from the 'main L/R' connections. System prefs and the audio/midi utility both see the io2 as a device with 2x ins and 2x outs, but both tell me the device has no output controls.
    Creating a new aggregate device didn't work, so any ideas how to resolve this one? Also, could creating this new aggregate device have contributed to my first issue?
    Any advice would be gratefully received.
    Thanks in advance.

    I would start by trying the i/o 2 with garageband in another user account to find out if it's a local or global problem.
    Then with the alesis plugged in make sure that all your settings in the audio/midi setup utility are correct for the device.
    A class compliant device means if they build the interface to a agreed upon spec it will be recognized and be able to use the apple driver (core audio). It did work because you were able to use it and change it's function when making it part of aggregate device.

  • How can I remote control my iPad 2 with my iPhone.....apart from limited 2screens?

    Is there an app yet or in development which means I can remotely control some aspects of my iPad 2 with my iPhone.....I have used 2screens but am hoping for a more universal app......thanks
    Stephen

    Actually, if you Don't know how to do, you could go to
    http://charlie-roberts.com/Control/ (the web site of the creator of your app.)

  • How can change or control tempo in Logic8 with incoming MTC signal

    Hi Logic users!
    I need help about MTC synchronisation. How can I change tempo /follow tempo/ with incoming MTC signal in Logic 8.
    Many musician and producer use Cubase and we need frequently use their tempo map. We use Soundscape HDR /there is our main equipment for audio recording – working very stable and reliably/ as MTC master because of I simply open in HDR any midi file exported from Cubase as „tempo map“ and Soundscape can read time information included in midifile and read and change tempo /so midifile i sused as tempo map./. In Cubase is very easy read incoming tempo information. You can switch in transport bar either „fixed“ tempo or „track“ for change tempo with tempo map or incoming MTC signal with tempo information but in Logic 8 I did not find any solution.
    Our setup is: 2 SSL Soundscape HDR, Logic8, Yamaha DM2000 mixing console – Soundscape is MTC master. From SS I send MTC to all other gear/ to Mac with Logic8 and to Yamaha DM 2000 for mix automation etc./. Logic is sync very well to incoming MTC signal from SS so it is OK but don´t read incoming tempo information.
    Please help

    MTC (MIDI Time Code) is time based, not tempo based.
    The tempo map will need to be recreated in Logic.
    MIDI Clockb is tempo based but as of version 8, Logic no longer reads MIDI clock. Doubt if that would've worked anyway.
    pancenter-

  • How can I midi Roland TD-9 KX2 with Logic EXpress 9?

    Hello everyone,
    Here is my setup:
    I have the Roland TD-9 KX2 connected to M-Audio MIDI In & Out and Audio 1/4" In & Out, Then connected to Logic 9 thru USB on my MacBook Pro.
    I create a new track and select Audio and then I create another track and this time I choose External.
    When I hit record, the audio track shows waveform recorded but the External/MIDI does not.
    Note: When I'm recording, I can see the MIDI notes (look like little blocks), but when I stop recording, They disappear...
    Can someone please tell me how I can execute this or of if anyone has a tutorial that they can share link of it.
    Thanks in advance,

    I had a simular problem. Only I had Ver 9 and needed 9.1.4 to be compatable with Lion. I had installed Lion and didn't think I would have any problem with Apple apps. Not the case with Logic Express. Here is what I did.
    First: I removed all versions that were previously installed on my Mac Pro. Then using the latest (9.0) I reinstalled. Important. DO NOT TRY TO OPEN APP. Next: down load (free) version 9.1.4 and install. Once everything is closed and disks are removed. Start Logic Express 9.1.4 and guess what...if just works.
    I believe some of the residual files were residing in my library some place and I didn't see them. Before I reinstalled I was recieving the message that I didn't have a qualifing version of Logic Express. This is when I had two versions 9.0.0 and 9.0.1. Someone said to remove the older version, I didn and nothing.
    Do what I say above and you will be rewarded.
    Good Luck

  • In Logic Pro 9, how many midi controlled software instruments do you get...?

    In Logic Pro 9, how many midi controlled software instruments do you get and is there possibility to download more as it says 40 on the programs info on the Mac Store, as i intend to compose on it but with only 40 instruments it's not really worth it.
    So i was just wondering whether it let you download more for free.
    Thanks for reading
    ~Matt

    Yes: I too am interested in the software instruments available in Logic Pro: one has to be a bit wary of the jam packs because there don't seem to be many solo instruments included. But I looked at the Logic screen in an Apple store the other day, and it worked like GarageBand in
    this respect: you created a new track choosing the software instrument option and a whole lot of instruments came
    up in a column on the right: lots of solo wind instruments, plenty of keyboards and guitars of course and not very many solo strings, only one violin, in the world music subsection under Irish fiddle. Yehudi Menuhin
    where are you when we need you?
    What I've been trying to find out is which part of the purchase does this long list of software instruments arrive with, because it's basically the only reason
    I'm interested - I get on fine with gb but it
    Just hasn't got enough instruments, and as I say the jam packs don't seem
    to resolve this ? Or do they? Could someone please help
    me with this?

  • How can i convert MPEG file to midi or wav format

    Hi,
    Can any one help me in converting MPEG music file to midi or wav format.
    I am trying to import it to my 3D application to run my animation but have to convert it to midi or wav format.
    Can anyone help me please. Audition can do this job ?
    Steve

    For a start, MIDI isn't a sound format, so you can't possibly convert mpeg to that. All MIDI is is a way of sending note-on, note-off, etc information. It stands for Musical Instrument Digital Interface - gives you a bit of a clue, really...
    Audition will automatically convert any file it can open to wav (that's how it works), but since you haven't said what sort of mpeg file it is (and this is significant), we can't tell you any more until you do.

  • $5 Starbucks card to first successful answer: how to import midi timecode into Logic Express 9 from Roland VS-880 or Ensoniq ASR-10

    I will literally mail a $5 Starbucks card or gift $5 via paypal to the first person whose response gets me success.  Then after all responses are provided and I'm successful with my issue, I'll also raffle off $5 to one of ALL respondents by random pick. 
    Problem/question:
    I can't figure out how to import midi timecode data from either an Ensoniq ASR-10 or Roland VS-880 Vxpanded into Logic Express 9, so I can then use Logic Express 9 as the master.  No manuals seem to explain that; I just can't find it.
    Background/basics:
    1.  My ultimate goal will be to move all midi data from the Ensoniq ASR-10 floppies and all digital audio files from the VS-880 into Logic Express 9.  Once the midi timing is imported into a Logic Express 9 file, I'll import the data from the Ensoniq & Roland via steps 2a & 2b below.
    1a.  Ten years ago I somehow (am in the process of re-learning what I did 10 years ago) imported the midi timing into the Roland VS-880 Vxpanded from the ASR-10, and then used the VS-880 as the Master to control the ASR-10.   So my current status is that I use the Roland VS-880 as the master, and the Ensoniq ASR-10 as the slave.
    2.  FYI for anyone who might be in the same boat, wanting to transfer stuff from an Ensoniq ASR-10 and Roland VS-880 to the computer:
    2a.  I will import all midi sequence data from my ASR-10 floppy disks via a utility purchased here, which will all a PC to read Ensoniq-formatted disks, and then just hopefully cut/paste midi files into Logic Express 9 (FYI only):  www.chickensys.com
    2b.  Then will import all the individual WAV files from my Roland VS-880 to Logic Express 9 using a method learned here (FYI only): http://www.vsplanet.com/ubbthreads/ubbthreads.php?ubb=showflat&Number=985974&PHP SESSID=b1d2f57be4a1d37d49787400213b22df
    2c.  I'll then combine them all into Logic Express 9.
    So - how the heck do I capture/import the midi timecode into Logic from either the roland or ensoniq using midi?
    I'm don't think that cutting/pasting the midi data into a Logic Express 9 sequence file (step 2a above) will do that, because there are all kinds of tempo & time signature changes in the midi files unfortunately.
    THANK YOU and Merry Christmas!!
    Andy

    OK doesn't look possible.  Closing discussion. 

  • How to adjust a "control array" size

    I have a program that creates a digital PWM signal with variable duty cycle. The duty cycle changes every 50 ms, but the overall wave frequency stays at a frequency determined by the user. I have the VI attatched.
    My problem is this...I need to be able to control the overall cycle time. This means the size of my array of duty cycles needs to adjust based on the cycle time (i.e. a cycle time of 1 second would require 20 of the 50 ms slots, while a 1.3 second cycle would need 26).
    I currently have only 4 slots in my array, meaning the total cycle time is .2 s. I understand how to manually add and remove elements to the array, but I can't figure out how to add a control to it so that the array size changes automatically, allowing much quicker entry of data. As of now I can make it work, it just takes super long to add or delete array elements. The ideal situaton would have a constant control for cycle time divided by 50 that would change the array size.
    I can't find any info on this, and I think I even saw a post asking that this kind of feature be added. I'm relatively new to this program.
    Thanks
    Solved!
    Go to Solution.
    Attachments:
    var_duty_cycle.vi ‏25 KB

    Currently, your VI is a one-shot deal. What you need is a state machine that updates the pct duty cycle array control as a function of the frequency while the current I/O code is idle.
    I would use an array of clusters, where each cluster contains e.g. a sequence number, a duty cycle, and a string as element label. Show the scrollbar and set the size whenever the relevant inputs change. Do you want to reset the current setting when the number changes or do you want to retain the current settings as much as possible? You could just use the existing values, reshape to the larger or smaller size, and write it back to the control via a local variable. Set all elements  except the percent to disabled so they act as indicators and cannot be changed by the user.
    (You also need to program around it if the operator tries to manually add more elements. A better solution would be this idea, so vote for it .)
    Some more general comments bout your code:
    Why do you use extended precision floating point. All your waits are internally just integers. EXT makes no sense
    There is a primitive for 1/x. However, you could just do a 1000/x and eliminate the multiplication afterwards. SInce you are dealing with integers, you can even do the division using quotient&remainder. Depending on the allowed frequency range there are possibly no orange data needed at all.
    Make the diagram constant representation match the rest of the code.
    The pulses/50ms indicator belongs before the loop. No need to recalculate and refresh it over and over from the same input values.
    LabVIEW Champion . Do more with less code and in less time .

  • Midi controlled sounds

    My midi controlled sounds cut off when controller keyboard note is lifted creating a click as the "sample is stopped" any Ideas ?
    this is domianent on piano patches

    Thanks for your reply Blueberry. The fact that I have overlapping objects is not in dispute here. What effect does it have? I don't understand what difference it makes in terms of the operations within MainStage2. That's what the question is.
    As it turns out, there are several objects highlighted in blue (in layout view), but that doesn't tell me what it means. In the layout view, I had put pedals and switch controllers together based on the keyboards they are connected to, and they match the physical layout I have on the floor. I also put pitch and mod wheels next to each of the keyboards. I don't know whether I need to do this, but I thought it would help to see what's going on, and to map functions with controls.
    Is it an innocuous message telling me that the graphic might not be clear, or is it saying that there is an underlying configuration issue which will prevent operation ? If it's graphical, then it still looks like I want it to look, but if it's something programmatic which will disable functionality, then that's a different story. In that case, I want to know how to resolve the issue, otherwise there is no issue from my perspective. Things look like I want them to look.
    Still looking for something more conclusive.
    Thanks,
    Glennzone

  • Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

    Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

    This gets confusing, you have two Macs with different issues and two pedals with different issues? First let's sort out what's what. So, do the issues come from the pedals or from the Mac software? To find out, simply switch the pedals and note their behaviour. No change: it's the software, change: it's the pedals (imho the most likely scenario).
    Second, what kind of pedals are they? Can you name the type of pedal too? The Yamaha what and the Mgear which?
    Third, with the 4 fold data problem, are the doubled events simultaneous, or a few ticks apart, or more?
    Also, you have no MIDI keyboard? Are the pedals both "standalone"?
    I think you have to sort this problem at its' source, which are the pedals. You could, if push really comes to shove, perhaps create some sort of ingeneous/elaborate transformer setup in the environment to filter the extra messages, although with the 4/4 sustain events that may not even be possible. With the "stepped" events you could set up a filter to just block all events with values 20-110 or so.
    But much better would be to configure the pedal(s) correctly.

  • How can i add control at runtime??

    hi,
    please help me! how can i add control(textfield, dropdownlist or subform...) at run time???
    thanks

    this option had no relation about editing items or not , i hadn't notice it was accessible true pop up
    when you rigt click is properties disable also ?
    may be i 'm wrong i talking about that :
    see attachement
    CLAD / Labview 2011, Win Xp
    Mission d'une semaine- à plusieurs mois laissez moi un MP...
    RP et Midi-pyrénées .Km+++ si possibilité de télétravail
    Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
    Don't forget to valid a good answer / pensez à valider une réponse correcte
    Attachments:
    example.jpg ‏57 KB

  • Is it possible to assign MIDI control to change tempo?

    I would like to be able to change tempo (say, from 120 to 180 bpm) by using a fader from a MIDI keyboard (Edirol PCR-30). I can assign MIDI commands to Logic's buttons, volume, pan... but I can't figure how to do it with tempo. Any help would be appreciated.

    Environment-->New-->Fader-->Specials-->Tempo Control
    You get a fader which you can then assign a MIDI control command to.
    I've heard somewhere that this is really buggy in recent years so use at your own risk, but at least in theory that's how you do it.
    -Dan
    G5 2.3   Mac OS X (10.4.5)   RME Digiface

  • How can I convert a wave file to a jpeg file (picture) is it possible???

    Hello:
    How can I convert a wave file to a jpeg file (picture) is it possible???

    zuckini;
    I am pretty sure you know, but just to be completely sure: a wave is (usually) sound signal and a jpeg file is an image.
    If you mean how to display the wave signal in a graph and then save the graph as a jpeg file, then just drop a graph indicator in the control panel, wire the signal. Check any of the example shipped with LabVIEW on how to do this. To get the image, drop a graph indicator's invoke node in the block and select "Get Image". Check this page for detailed information.
    If you have something else in mind, please reply to this message with additional information about the wave signal, the image, etc.
    Regards;
    Enrique
    www.vartortech.com

Maybe you are looking for

  • ATI Radeon HD 4870 - Bootcamp & Catalyst Control Center

    Hey all, I installed Bootcamp (Vista 64-bit) 5 min ago and noticed that Catalyst Control Center was not there. When installing Bootcamp on my MacBook Pro I got the Nvidia panel, why is not the CCC available on the Mac Pro?

  • Why i cant sign in icloud .. (com.apple.appleaccount error 403.)

    please help me..i cant sing in icloud .. (com.apple.appleaccount error 403.)

  • Custom component by aggregation of components

    I developed with some my custom and starndard component somthing like input text with server autocompletion. It works using an HtmlInputText, then there is one my custom component, and than I use a HtmlDataTable to show the list for autocompletion. S

  • Solaris containers, am I thinking in the right way ?

    Hi there, I've downloaded Solaris 10 and so far I really like what I see. With all the exploits appearing on Linux (local root exploits in the kernel for example) I'm seriously considering to replace my Debian GNU/Linux environment with Solaris 10. O

  • Game Heap Space - Out Of Memory Error

    Hi there, Ive completed my pacman/space invaders hybrid game- which has a main game and two playable videos. Its all fine, but when I go to run it it says; Exception in thread "Image Fetcher 1" java.lang.OutOfMemoryError: Java heap space Exception in