How do I move one or more regions between tracks without introducing any horizontal (i.e. non-sync) movement, please? (GarageBand 3.0.5)

umpteenthian wrote:
I'm not working in measures but in real time
i'd switch to measures while moving the regions, it would make the work much easier.
umpteenthian wrote:
why can I not position the playhead in the centre of the timeline window and zoom in fully WITHOUT the playhead moving out of sight?
https://discussions.apple.com/thread/3329754?tstart=0

Similar Messages

When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?

When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?@

Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work.

How to delete a word mistake in a vocal track without deleting the whole track

How to delete a work mistake in a vocal track without deleting the whole track

jon w. (nichimyoun) wrote:
How to delete a work mistake in a vocal track without deleting the whole track
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsection
(Let the page FULLY load. The link to your answer is at the top of your screen)

My sons ipad uses my user name (i have an ipad and iphone). I want to set his up with his own username and password. How do i do that and can it be done without losing any of his apps, songs or video?

my sons ipad uses my user name (i have an ipad and iphone). i want to set his ipad up with his own username and password. How do i do that, and can it be done without losing any of his apps, music or video?

Go to http://appleid.apple.com.
To clarify, the mere act of changing the Apple ID on the device will not remove any content. But you cannot update the apps or re-sync them if they get deleted without the old Apple ID. It may be best to download them again with the new ID.

How do I remove one of the calendars from iCloud but keep it on the iPhone to sync with Outlook by USB and keep the other calendars synced on iCloud ?

iPhone 5, Macs and iPads at home, Windoze7 system at work.
Using iCloud to sync calendars, contacts, etc on all the home devices. Used USB cable to sync at work with the Windows system, with the Outlook 2010 corporate account (corporate server). I need only the Outlook calendar to be synced, syncing the contacts created too many problems with duplication, etc. No need for that. Worked fine until the latest upgrate to iOS7 and iTunes 11.1. Used to have a calendar that was not on iCloud and was simply and exclusively syncing between the iPhone and the Windows computer at work. The other 3 calendars synced fine with the macs and iOS devices via iCloud but not with the machine at work - keeping private records private.
Upon the iOS upgrade, all calendars are now on iCloud. I am no longer able to remove one - for security too - from the iCloud and sync it with the Windows computer exclusively. I managed to sync it once on the PC with iTunes by switching iCloud off on the iPhone before connection by USB cable. Trying it again, it tells me that it will erase all items on the Outlook account (the "more than 25% of your records are going to change" alert) and won't add or modify any. I stopped the sync in time...
Tried on the iCloud site for a solution to remove the calendar, nothing.
There is no iCloud setup on this corporate computer - no access permitted. The USB cable connection is the only solution and up to the upgrade of the iOS this went seamlessly.
Any solution out there?
Thanks
Vladski

I share a similar situation (usb iTunes sync with Outlook with my corporate laptop; personal calendar on icloud).
With IOS7, at first, iTunes/Windows does not propose Outlook sync anymore. I need to switch off calendar from iTunes to enable usual usb sync with Outlook. I had to sync it twice while checking "replace iphone data" to get a stable behaviour (like before) IOS7.When I try to re-enable icloud calendars, it proposes me to merge them...
I did not test merging so far...
IOS7 and iTunes 11.1 are not completely polished ;-)
PY

How do you remove files from your start up disk without deleting any files?, How do you remove files from your start up disk without deleting any files?

Hi,
I was wondering if anyone knew how to remove files from the start up disk without deleting any files?
I am unable to add any more photos and even download the latest updates because the start up disk is full....
Is it possible to move the files off the start up disk without deleting them?
I would appreciate feedback,
Thanks
Sammy

Well you can move them to an external drive but this will delete them from the internal drive. Which is what you have to do to free up disk space.

How do i erase one or more devices registered on my itunes

how do i do this?

What do you mean "erase"?
You mean remove the content from the device?
Please explain

How can I use one background jpeg in my ebook without a large file size

I'm guessing that by simply adding a background image or watermark by default adds a separate copy to each page. Since I am intending for them to be the same on all pages except for the title page, how do I shrink the final file size of my PDF eBooks so that the image is stored once but shown on all pages?
Thanks in advance.

Thank you, I understand, yeah, I knew that, my phone is factory unlocked and I am going home, which is obviously not in the States and I am thinking of buying a local carrier there. However, I still have 2 weeks before I leave and cannnot wait to start using my Iphone 4. I thought at least I could use the mp3 player function. So as far as I understand, I cannot activate it without a sim card. I have been using metropcs for about two years and it does not have a sim card. In this case, do I really not have another choice but wait for two weeks to listen to music? My Mp3 player just failed me and I really need to listen to music but on the other hand, while I can use my iphone as an mp3 player in two weeks, I don't want to spend more money on a new one. So, do you have another suggestion? For instance, can I use a friend's sim card to activate mine? Would this cause any trouble, when I go home and buy a local carrier? I think these questions might kinda sound weird to you, but first time with an Iphone, extremely excited to start using under my circumstances, I need help thanks,

How to play back one channel of the stereo track in both headphone cans?

I recorded two microphones in one stereo track. Is there some way I could listen to the left channel and then to the right channel in both cans in my headphones, like a mono track? Panning moves all sound to the left can or the right one in my headphones. But I'd like to listed Left channel as mono channel in both headphone cans, and then press some button and listen to the right channel in both cans. How can I do it?

No problem. By the way, there is a wrinkle in Logic that you may not be aware of.
When dealing with a stereo track, the knob in the channel strip that you may think of as a Pan knob is not. It's a Balance knob. What is does is to change the level of what's in either left or right channel but does NOT move the left signal to the right or vice versa.
To prove this:
* Create a project with two mono audio tracks
* Put different files on each track
* Pan one hard left, the other hard right
* Bounce the result
* Create a new project with a stereo audio track
* Import the audio that you exported above
* Use the Balance Knob to bring either up or down
* Note you cannot move one signal from its original position
If you want to pan a stereo signal, you have to use the insert: Imaging > Direction Mixer. Only then can you position a stereo signal in your stereo field. This is documented in the user manual in the section called: "Setting the Pan, Balance, or Surround Position".
Have fun!
Pete

How do I insert one file into another with track changes intact?

I gather that Pages does not have a way to insert a file into a document in the way that Word has insert file. So all we can do is copy an entire document and then paste it into the second document. But when I do that I lose the track changes, except for the odd comment. What is the way around this?

I'm assuming you're wanting to insert the contents of one Pages document into another. I don't have a need to use tracking, so I'm not sure if this applies but I think it should.
You can insert sections from one Pages document into another. Open your files & show thumbnails. Sections have a yellow border around all of the pages in that section. Now click on the page in the thumbnail pane & copy. If the file is more than one page & you only want one, you'll need to insert a section break to separate the pages. Then go to your other file, click in the thumbnail pane & paste. If you want to insert the other content into the middle of a section in the receiving document, you will need to insert section breaks at the point you want to insert. The whole copied page will be pasted in. Repeat with another section. Styles will copy over with the sections but headers & footers will not.

How do you hide one dimension from EPM context pane without locking it

Hi Experts,
Simple question: How can I programmatically (using vba) hide a particular dimension in the EPM context pane, without locking it?
Following API's could be used, but they all have have a mandatory parameter for the dimension member... which locks the dimension... but I need it to stay unlocked!
SetContextMember
SetContextOptions
SetContextOptionsForSeveralDimensions
And no, I do not want to use the User option to hide the full context pane.
Thanks for your advice.

Hi,
You can use Hide option to just hide required dimensions with out locking.
EPM-->Options-->Context Options.
Thanks,
Raju

How can I move new Garageband(10.0.2) project to another computer

Hello,
I normally record on my drummers' macbook pro. However, I wanted to make some extra adjustment of our work on my own computer as well. I researched and I found some solutions saying that "save as Archive Project" then transfer. But looks like on the new Garageband 10.0.2, there is no option called "Enable Archive Project." So is there anyway I can open the project on my computer. I tried to just copy it and open it but it says "file cannot be opened"
Mac pro OSX 10.9.2
Garageband 10.0.2

How did you transfer the project to your computer?
You need to copy the project file (.band) and transfer it on a thumbs drive or similar, then copy it from that drive to your computer.
You cannot open a GarageBand project on a DVD or CD, the device needs to be writable and formatted for Mac as MacOS Extended (Journaled).
Set the "Ignore Ownership on this Volume" flag for the thumbs drive you are using to copy the project. You can do that from the "Permissions" brick in the "Get Info" panel for the drive, if you select it inn the Finder and use "File > Get Info".
And, last but not least, are you having exactly the same versions of GarageBand on both macs?
Alternately, if you are using the same AppleID on both macs, save your project to iCloud on the first Mac, and download it from iCloud on the second Mac.
To save to iCloud:
Make sure, Documents and Data is enabled in System Preferences > iCloud.
File > Save as
Select iCloud in the File Chooser
To download from iCloud on your mac at home, use File > iCloud > Open iCloud Song.

Can't drag regions between tracks

I upgraded from Panther 10.3 to Leopard 10.5 and now my Garage Band v1.1.0 is acting strangely. I cannot drag highlighted sections to other tracks, adding new tracks doesn't even work sometimes. Do I simply need a newer version of Garage Band to integrate with leopard?

You need a newer version of GB ver 4.1.2. also keep in mind that the new GB is really designed more for Intel-Macs than G5 Proccesors. In addition Leopard maybe was the wrong move for your machine using audio programs like garageband, logicstudio ect..

How can i clean up my ok pro 7.1 without deleting any applications?

hi guys! I just need ur help regarding my MACBOOK PRO 7.1. My sister gave it to me, and she has lots of files and applications/programs that i want to remove/clean.. How can i do this without deleting my OS and other application like words and excel? any help is highly appreciated! thanks!

Katrina416 wrote:
What the heck is using all of my space!?
See this discussion...
https://discussions.apple.com/message/21218286

Why am I getting error"403" when I enter an Apple appointment via one to one or Apple confirmation email, but not on any other ical icon non apple additions?

Whenever I add a one to one Apple class from my one to one site and click the ical icon, I get the following error message. I also get it when I click on the ical icon from the Apple email confirming my appointment to add to my calendar on my Mac Book Pro. But, when I clcik an ical icon from say, Open Table, for a reservation I do not get the error. At the Apple store, they tried it and saw they got the same erro on their laptops as well. I notified as did the Apple store over two weeks ago, but nothing has changed.
Error:
The server responded with an error.
Access to "Apple- One to One: Open Training" in " Apple Store" in account "icloud" is not permitted.
The server responded: "403" to operation CalDAVWriteEntityQueueableOperation.
Ignore or Try Again or Revert to Server

can you connect to the internet? today was the day the FBI shutdown a DNS server and people who were affected with the virus got shut off from the net. it was on for 5 years.

How do I move one or more regions between tracks without introducing any horizontal (i.e. non-sync) movement, please? (GarageBand 3.0.5)

Similar Messages

Maybe you are looking for