How do I move video clips to specific points on a music track in iMovie?

I am trying to make a lip synch video and need to move my video clips to specific points on a musci track so that the words are in time with people singing - does anyone know how to do this? At the moment, I only seem able to put the clips in one after the other...

Hi
IMovie is Video clip oriented - meaning that Audio can not be put in first and video/photos added later.
So to do this I use black photos that I fill up the Video with first
Then Add audio
Then add Video/photos by Cutaway function or exact replacement (in time).
This is so much easier in any version of FINALCUT where one can build Audio first then create the video ontop of this.
Yours Bengt W

Similar Messages

  • HT4589 How do I move video clip clip up or down after setting letterbox, i used to be able to do this until i upgraded to 10.0.6

    I used to be able to manually move my video clip up and down in the event the browser using one of the settings. It was a vertical settings that i would use to pull a video clip down after i applied a letterbox to the clip, so I could see the top of the the video clip that got blocked out by the letterbox. Still looking no luck....I used to be able to do this just upgraded to FCPX 10.0.6 now i dont have the setting..

    think i might have solved my own problem the feature is not there i have to upgrade again to 10.0.7...this is getting annoying...

  • How can I move videos to computer without syncing

    Can anyone suggest how I can move video clips to my computer from the playbook which will not sync now that I have update the lastest software. They are too big to send in an email. When I tried to upload them to a youtube account, the file was rejected because the name looked like VD 000164.mp4. In edit mode in the video file I have the vast array of editting options: delete or cancel. I cannot change the name as it is uploading.. Any way to salvage this as a video camera?

    Personally, for this type large file transfer, I use the PlayBook's WiFi Sharing as described in the initial solution in this Knowledge Base article.
    How to transfer files to and from the BlackBerry PlayBook tablet  
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How do I convert Kodak Camera .mov video clips to Windows .wav files?

    This morning I purchased Apple QuickTime Pro for ONE specific reason and this is so I can convert .mov video clips taken with Kodak cameras to Microsoft Windows .wav files. I have tried everything I can imagine so far with negative results.
    I'm starting to think this may not be possible even though APPLE advertised this program as being capable of converting their .mov files to "LOTS" of the usual formats. IF Windows .wav is not a common format then what is?
    If this is not possible with this program I am going to be one unhappy guy for having totally wasted $29.95 and will have a very bad opinion of Apple in my mind from now on.
    DELL Dimension 8300   Windows XP Pro   XP Media Edition

    Open your Kodak file using QT Pro.
    Open the Movie Properties window and "Extract" the audio track.
    This will open in a new window. Choose "Export" and then Sound to WAV. Name and save the file.

  • How do i see video clips already imported in to an event?

    How do i see video clips already imported in to an event?
    I have already created and shared one movie project from the clips and from photos but now want to make another. However, when i go to the library it only shows me the content of the first project, including the photos, not all of the video clips i originally imported. I can't believe that I need to import them all again.

    It seems to me that you must have imported your clips using iMovie 9, (that's why they are all in the Events folder which belongs to iMovie 9).  Then you must have upgraded your current project to iMovie 10 which will have put the clips used in that project (but not all the others) into your iMovie 10 library.  iMovie 10 has a totally different storage arrangement for media.  You should be able to update your other iMovie 9 projects by choosing File > Update Projects  and Events in iMovie 10.  See: http://help.apple.com/imovie/mac/10.0.8/#/mov902ad0c31
    This does not stop you from continuing to use the projects in iMovie 9 though any further editing you do will not be transferred to the other version of iMovie.
    Geoff.

  • Can anyone tell me how to make a video clip in color transition?

    Can anyone tell me how to make a video clip in color transition like the opening of "Oh Brother where art though" ?
    You know the scene at the start where it starts off Black and White then as we move down the timeline it transitions to a rusty brown gradually.
    It's on the Apple site for FC Studio as a promo clip.

    how to do a keyframe trasition in the Color FX room
    I realize that you can "add" keyframes to the timeline in COLORFX, but I don't believe they are always observed, and then they usually disappear in retrieved projects, and aren't persistent if you leave the room. To remember where they are... you might mark in a keyframe on those frames in another room as a pathfinder. The behaviour is consistent with a creature of the six-legged variety.
    Method 1. If you are trying to taper the effect (any effect) in COLOR FX, the most linear approach is to render two versions of the clip; one "with", one "without" and do an opacity fade once you have returned them to Final Cut. This gives you the most control, flexibility, repeatability and consistency.
    Method 2. You may attempt to keyframe the bleach bypass settings within the node itself -- the preset that comes with COLOR doesn't have any controls, but the Nattress plugin does.
    Method 3. Set up a "blend" node with your bleach bypass feeding one of the inputs and leave the second input to default to the untreated video... keyframe a transition from "1.00000" to "0.00000" and that should work.
    Note: the keyframe timeline markers will disappear from the timeline if you exit the clip, but the effect is likely to persist. At least that was what was happening a couple of minutes ago... for me, the effect and blend performed the transition just like it was previewing when rendered. This strategy is subject to being created and rendered "on the spot right now", and I advise making sure you have your renderqueue settings ready to go... load the clip from the COLORFX room using the Mac command bar at the top of the screen and render it right away. Don't try to save it for later. Just Do It.
    An announcement went around about two weeks ago that Mr. Deakins' website was back up and running, so give him another try... poor guy has been swamped probably doing Dreamweaver maintenance... yeah, that must be it...
    jPo

  • How can i move video and music and narration all at once in the project library

    how can i move video, narration and music all at once in the project library  it is only moving the video

    Select the directory with your pngs in it.
    Right-click>Browse with Adobe Bridge
    Select your pngs
    Tools>Photoshop>Load to photoshop layers (not sure how many layers this can handle--you may wind up having to do this in batches)
    Save your new psd
    In Flash, create a new symbol with a blank timeline
    Ctrl-R, navigate to the psd you made earlier
    Select all the Photoshop layers
    Check "create MovieClips for these layers."
    Convert layers to keyframes or flash layers (not important, since you probaby don't need to keep this symbol)
    OK
    You'll have Movie Clips, not Graphic Symbols, but maybe you can write or find a JSFL to convert them and then you can block select them, click the Properties button, and change the type from MovieClip to Graphc.

  • IMovie How do you join video clips that have been split

    In Imovie project, How do I join video clips that been split

    Hi
    And if the clips are not contiguous - Then You have to do as in all versions of iMovie from the very beginning.
    • Put the clips into one new project
    • Export this as full quality QuickTime movie
    • Import this new merged QT-clip into Your main project
    This is a way around that are very basic and used whenever more elaborated scenes are prepared - e.g. multiple text clips or when in need of adding several functions into it.
    Tedious - but it always been like this - in contrast to FinalCut.
    Yours Bengt W

  • How can I move videos from Revolution phone to mac?

    How can i move videos from Verizon Revolution to Mac? My computer is Mac os x version 10.5.8
    I have several videos that are too long to send via email, which is how I have been moving pictures and videos. I plugged it in using the USB port. The phone says I'm connected via usb. My mac brought up a box warning that the "cd connected" is not readable.

    Hi ..
    You can use the Image Capture app located in your Applications folder to import vidoe content from the phone to your Mac
    Instructions here >  Using a camera with your Mac - Apple Support
    If you have problems, make sure your Mac's software is up to date.
    Open System Preferences > App Store then click:  Check Now

  • How can I move a clip from one movie to another

    How can I move a clip from one movie to another?

    If it's just a clip, you can simply go to the other project and Add Media/From Files and Folders.
    But if it's a part of your movie -- say a sequence of clips or a clip that's had effects added to it -- you technically can't cut and paste betweeen projects in Premiere Elements. However, some people have been able to do it using the third party program ClipMate, available online.

  • How do i move video files from PC to iCloud?

    how do i move video files from PC to iCloud?

    You can't move videos to iCloud, but you can upload photos

  • Does anyone know if/how to rotate a video clip?  I shot it so that it is sideways on my computer screen and I cant figure out how to rotate it.

    Does anyone know if/how to rotate a video clip in iphoto?  I shot it so that it plays sideways on my computer and I cannot figure out how to rotate it.  Thanks.

    You can't do that in iPhoto. You'll need a video editor like iMovie for the job.
    Regards
    TD

  • How i can wacht video clips in my mac and the tv at the same time trough the apple tv

    how i can wacht video clips in my mac and the tv at the same time trough the apple tv

    Welcome to the Apple Community.
    Unfortunately you can't do that.

  • How do I get video clips from Windows 8 to mini ipad

    How do I get video clips from Windows 8 to mini ipad

    You can use a 3rd party app like Photo Transfer App.
    https://itunes.apple.com/sg/app/photo-transfer-app/id365152940?mt=8

  • Nokia 3110 c : How to transfer the Video Clip Fold...

    My handset model is Nokia 3110C. The memory of which is around 32~34 MB. I have installed Memory Card of 2GB. Currently, the Video Clip Folder can accommodate only 8 MB maximim. The Files dowmloaded can not save beyond 8 MB. But my SD can hold upto 50 MB.
    It will be wise to transfer the Video Clip Folder to SD to enhance memory space to 3110C.
    Can any learned user guide me  as to - how  to transfer present Video Clip folder or its contents FROM 'My Galler' Folder TO SD Folder ?
    Thanks     BASAB ROY. 18/9/2010

    Download the OVI Suite from..
    http://europe.nokia.com/support/download-software/nokia-ovi-suite/compatibility-and-download
    .. and install on your PC...
    Connect your Nokia E66 .. select the Envelope Icon in the OVI Suite and select Sync...
    When the process is over all the messages will be seen in the OVI Suite window...
    Now connect Nokia 6730c..
    In the middle window of the OVI Suite you will see 2 tabs ( 1. View Messages arranged by Date and 2.  View messages grouped by contacts).. Make sure that you select the first..
    Drag-and-Drop all messages with Downward Arrow Icon into INBOX in the bottom window ( where you see the Phone icon) and all the Messages with Upward arrow into SENT folders respectively..
    Hope this solves your problem..

Maybe you are looking for

  • How well will Premier run on a MacBook Pro Retina i7 with only 8GB of RAM?

    My niece wants to do some video editing using Premier and we were wondering if there would be a problem running it on a MacBook Pro with i7 and retina display with only 8GB of RAM? I know 16GB would be better but that is not an option at this point.

  • Link in a text in UIX

    Hi, I am looking for a possibilty to dynamicaly generate a hyperlink on a text in UIX entered by a user which would point to another page. Say, the user enters 'Product x, <link or some other custom string> product group x1' in edit page and after Su

  • Hp-psc 1317 all-in-one printing problems

    I have a hp psc 1317 printer scanner.  It is connected to my laptop running Windows Vista.  Recently the print quality diminished until now when I print a document it sounds like printing is happening but there is no mark on the paper whatsoever.   T

  • Sizing the redolog

    My redolog details are below, SQL> COLUMN value FORMAT 999,999,999,990 SQL> COLUMN name FORMAT a31 SQL> SELECT a.name,b.value 2 FROM v$statname a,v$sysstat b 3 WHERE a.statistic# = b.statistic# 4 AND a.name like '%redo%'; NAME VALUE redo synch writes

  • 2nd Column Over Writes Group Headers

    Post Author: jwebersole CA Forum: Crystal Reports I am trying to write a simple 2 column report. I have done this a 1000 times. However, for some reason the 2nd column over writes the Group Headers.  The check boxes for Format with Multiple Columns a