How do I only allow certain users to print in color?

Product Name: HP Color LaserJet Professional CP5225dn Printer (CE712A)
Operating System Installed: Windows 7 Enterprise (64bit)
I work at a K-12 school and purchased the HP Color LaserJet Professional CP5225dn Printer (CE712A) for use in our computer lab. I would like to know if it is possible to have it so that only certain users can print in color (possibly put a password on it). I know the cost for color is higher, and therefore, would like it so that students have to approve through teacher if they want to print in color.
We are running it on our Print Server (networked) not through USB.
Thank you for the help.

Hi,
That's a very good question actually. In my corporate networks, we are talking about hundreds of laser printers and the ONLY thing we can do: only allow people access to a set of mono laser printers, not all printers. For example, the following printer is using B&W as default but can't stop users to print in colors if they could access to the resourse:
Regards. 
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How to only allow certain users to use internet?

    Hello, I've recently taken over the job of overseeing the internet connection here in my building. We have a shared internet connection and I was told to just give out the same WEP key to everyone. The problem now is that many people have canceled, but the WEP key still works. I want to make sure that only people paying for the service are using it. What is the best way of doing this?
    1. Generate new WEP keys? I think I can only generate 4. Is there a way of generating more?
    2. Block certain "Device Numbers" or "mac addresses?"
    I really know very little, so any help would be really appreciated.

    change the wep key first and then go to the go to the wireless and then on wireless network access (on the set-up page of your router) and click on the button select MAC address of networked computers and it will display the mac address of the client's that was able to connect using the new key and so you can just easily copy it on the permit only MAC address box to flter the connectoin.  So it's much easier than askign each 1 of the client's for the mac address.
    Do this right after dissemnating the new wep key to the clients,

  • How do I only get certain questions appear in the quiz results?

    I have created a course through Captivate 6, throughout the course there are questions to guage the learners attention. There is also a quiz at the end. However, captivate includes on the questions throughout the course on the quiz results which I do not want to happen.
    Can anyone advise how I can only get certain questions appear on the quiz results please?

    Branch aware turns off the playbar in 6 (not in 7 any more, at least not for me).
    Could you explain more in detail what you want, because I don't understand it. You want the user to answer all questions, but the score should only show what? If you don't want some questions to have a score added to the Quiz total, you can indicate that in the Properties of that Question slide.
    And please, tell the exact number (3 versions of 6), and also if you have to report to a LMS?
    Lilybiri

  • Allow certain users to capture quotation after bid end date

    Hi
    Is it possible to allow certain users to be able to capture quotation on behalf of suppliers using surrogate bid after the end date has been reached but before the opening date? How would I do this?
    Regards

    Hi
    As the end date and opening date are at the header level common to all bidders/vendors, we cannot manually capture quotation for specific suppliers using surrogate bidding. I dont think there is even a BADI for this.
    Rgds
    Reddy

  • Syntax to only allow certain values in column

    What is the syntax, when I create a table, to only allow certain values in a specific column ?
    create table x
    col1 char(1) <- for example, only want to allow Y or N
    ) tablespace myspace;

    That would be a check constraint. Please check the oracle syntax on constraints.
    create table x
    col1 char(1),
    CONSTRAINT check_col1
    CHECK ( col1 in ('Y','N') )
    ) tablespace myspace;

  • I have iphoto 6.  How do I only selecy certain photos from my camera when importing rather than all of them as show in the import page that loads

    I have iphoto 6.  How do I only selecy certain photos from my camera when importing rather than all of them as show in the import page that loads

    You use Image Capture (in your Applications Folder) for that job - or upgrade to a later iPhoto.
    Regards
    TD

  • How do I only allow people on my buddy list to contact me (and stop spam)

    How do I only allow people on my buddy list to contact me (and stop spam)

    Go to iChats prefs/accounts

  • How can I only allow free apps to be downloaded?

    How can I only allow free apps to be downloaded to my IPhone 4S?

    Sorry, but there's no way I know of to restrict downloading to free apps only. You can turn off purchasing of apps completely, but if purchasing is allowed, it's open other than by age range. You can of course remove any purchase method, but I don't believe that blocks the purchase; you just end up owing money.
    Regards.

  • Only allow that users write only in uppercase in all fields of ICWEB.

    It's possible only allow that users write only in uppercase???
    Thanks in advance.
    Best

    Hi Javier,
    I dont think that this is possible for all the attributes as most of them will be standard.
    But for custom attributes the case can be controlled from the domain.
    Check this thread where users experienced problems with the case of the text.
    Change of CASE in ZCOMPONENT ZFields
    Here too...user cannot be restricted, but after a server event system takes care of case conversion.
    Regards,
    Masood Imrani S.

  • I need to transfer files applications etc from a Mac Book Pro to a Mac Book, but I want certain files/applicaitons to be available only under certain users. DO I transfer everything first then move it into different accounts or can I set up accounts first

    I need to transfer files applications etc from a Mac Book Pro to a Mac Book, but I want certain files/applicaitons to be available only to certain users. DO I transfer everything first then move it into different accounts or can I set up the different user accounts first & select what goes where when I migrate?
    Thx

    Do you have a backup that you can restore from? Your old hard drive seems to be the problem.

  • Is it possible to restrict certain users from printing from Adobe Reader?

    Is it possible to restrict certain users from printing from Adobe Reader?

    First of all, with Reader you can't change any security settings.
    If you have Acrobat, then you could place a password on changing the document (which includes printing), and then give it to only some users.

  • How can I export to PDF for Offset printing including color and grayscale photo's?

    After reading dozens of forum, I still don’t found the answer.
    I made a photobook with full-colur and B/W photos for Offset printing. I want the B/W to be in grayscale to avoid color possible color shades. It seems InDesign doesn’t support grayscale, the images become way to dark. Even with exporting without any colour conversion or destination and/or including original colour profiles, the grayscale pictures are being exported to dark to PDF.
    How can I export to PDF for Offset printing including color and grayscale photo’s?

    Yes, the Photoshop & ID CMYK working spaces are the same
    This can get difficult because the 3 programs handle soft proofing differently.
    The working spaces don't matter, it's the document profile(s) that manage the preview. So here is the same grayscale image placed in ID on top and PS on the bottom. I've set my Photoshop info to show the doc profile in the lower left corner. I can see my InDesign's Document CMYK profile in my Proof Setup (the Working CMYK is different and isn't being used). Both profiles are effectively the same Coated FOGRA39 (Black Ink FOGRA in the case of PS).
    But the previews don't match because I have Overprint turned off, so the InDesign preview is Gamma 2.2 or a "screen" media preview.
    If I turn on Overprint preview I get a match because I'm soft proofing for print:

  • How can I restrict Lion to only allow certain network users to login when bound to an Active Directory?

    Hi,
    I'm trying to find a way to configure which network users can login to a lab of iMacs running 10.7.4. They're being deployed using DeployStudio, and the Macs are bound to an MS Active Directory by a script that runs as part of the workflow. I'd like to have another script run after the AD binding to permit only users in certain AD groups to be able login to them.
    I'm halfway there, in that using dseditgroup I can easily add AD groups or individual users to the relevant group (deseditgroup -o edit -a <domain\\group name> -t group com.apple.loginwindow.netaccounts. After running this I can see the desired groups added to the list in Sys Prefs -> Users & Groups -> Login Options -> Options. However, membership of this group is deemed irrelevant by the fact the radio button above this list for 'Allow these users to log in at login window' is still set to 'All network users' and not 'Only these network users'.
    Does anyone know of a way to enable the 'Only these network users' option via the Terminal/a shell script?
    Thanks,
    Chris

    I tried that, thinking it was exactly what I wanted, but it still sends stuff as SMS (green bubble).

  • I want to set up Firefox to only allow certain pages to load - how do I do this?

    My children are having my old laptop and I dont want them to be able to 'stumble' across anything unsuitable.
    How can I set up Firefox so that it only allows pages to load from websites I choose?
    Thanx!

    See:
    * https://support.mozilla.com/kb/Parental+controls
    * http://kb.mozillazine.org/Parental_controls

  • Authorization object not to allow certain user to enter sloc PO

    Dear All,
    i have manage to go su21 to create under mm purchasing authorization object called Y_BEST_LOC with Acty and LGORT field. other than that i have insert check item under program RM06ENHI. after that i go to su24 to assign the transaction code check for me21 and me22. under field value for me21, my new object i want to assign value (interval) = $LGORT, but don;t know how so i leave it blank.
    Come to user profile i adding this object into the authorization to check, and put in only allow for 0001 and 0002 location. But the user still can save the PO when choose 0004 without error. I want to know missing step that should be done to prevent certain user to order under 0004 storage location.
    Kindly suggest and guide me. thanks in advance
    Regards
    Aishah

    ME21/ME21N doesn't even check if the material is extended to the storage location entered in the PO. I don't think what you did is enough to restrict users per storage location, you need to find a user exit or BAdi and do the authorization check in the your custom code
    AUTHORITY-CHECK OBJECT 'Y_BEST_LOC'
             ID 'ACTVT' FIELD '01'  "Create
             ID 'LGORT' FIELD '0002'. "Storage Location 0002
    IF SY-SUBRC = 0.
    " User has authorization
    ELSE.
    message 'Not authorized for storage location' type E
    ENDIF.
    You may have to use the following Business Add-in (TCode SE18)
    ME_CHECK_ALL_ITEMS                    :  Run Through Items Again in the Event of Changes in EKKO

Maybe you are looking for