How do I only allow SPECIFIC webpages the ability to refresh or redirect?

Is there some way to have FIrefox only allow specific webpages the ability to reload or refresh a page? I already know of the
Tools -> Advanced -> Warn me when webpages attempt to refresh or reload the page
option. I am looking for the ability to only allow specific webpages, not ALL webpages.

Without additional information on the addon, as the documentation provided is sorely lacking, this addon doesn't help much.
Now if Firefox itself had a built-in whitelist / blacklist of pages allowed to redirect/refresh automatically, I'd be all for it.
Appreciate the thought cor-el, but it doesn't help.

Similar Messages

How can I only allow free apps to be downloaded?

How can I only allow free apps to be downloaded to my IPhone 4S?

Sorry, but there's no way I know of to restrict downloading to free apps only. You can turn off purchasing of apps completely, but if purchasing is allowed, it's open other than by age range. You can of course remove any purchase method, but I don't believe that blocks the purchase; you just end up owing money.
Regards.

Hi I have an iTunes account with my uk debit card but am currently in Australia, can I buy and use an iTunes/app store gift card in AU$ or am I only allowed to acces the store in gbp£ ?

Hi I have an iTunes account with my uk debit card but am currently in Australia, can I buy and use an iTunes/app store gift card in AU$ or am I only allowed to acces the store in gbp£ ? Cheers

I had the same error when trying to update my apps on my ipod touch. I tried to input my security code numerous times to no avail. I also made sure my billing address was the same as what my bank had on file. To fix the issue I went into iTunes, logged onto the iTunes store, went to account settings and reviewed my recent purchases. Turned out that I had made a recent purchase and didn't have enough money left on my credit card to pay for it at the time. I paid off the credit card, and then input my security code once more and now it works fine. I've heard that some debit or pay as you go credit cards require a minimum balance, so make sure you have at least that amount in your account.

How do I only allow people on my buddy list to contact me (and stop spam)

How do I only allow people on my buddy list to contact me (and stop spam)

Go to iChats prefs/accounts

How to fetch only WebI reports from the repository

How to fetch only WebI reports from the repository, where in we have Deski reports also in the repository.. any macro??

here is the query to fetch only webi reports:
Open Administration Launchpad (.Net / Java) from:
Start >> All Programs >> BusinessObjects XI Release 2 >> BusinessObjects Enterprise >
Click on the 'Query Builder' under 'Administration Tools' on the left pane.
Logon to Query Builder using Enterprise Administrator credentials.
Run the following query for Web Intelligence Reports:
SELECT SI_ID, SI_NAME, SI_OWNER FROM CI_INFOOBJECTS WHERE SI_KIND='WEBI'
Thanks,
Srikanth.

How Does EJB 2.0 Specification Change the BC4J?

Hi,
I had read the while paper of BC4J thoroughly. The following statement interested me:
"As Oracle9iAS, WebLogic, and other J2EE application server vendors begin to rollout complete support for the new EJB 2.0 specification in the first half of 2002, a new release of the BC4J framework will be released which includes support for the new local entity beans. This work entails enhancing our lightweight, local entity classes to support the necessary interface to be lightweight EJB 2.0 Local Entity Beans. ...."
I have searched all the documents about BC4J, but I couldn't find anything more about "How Does EJB 2.0 Specification Change the BC4J?"
I think the "Local EJB Entity Beans" is similar with BC4J DAO. So is there someone who can tell me how does EJB 2.0 Specification change the BC4J?
Any help would be appreciated!
James

We support using local CMP entity beans as your persistence layer for your entity objects, but as it adds an extra layer, it's turned out (in all honesty) to not be that popular a feature.
The performance offered by the simpler BC4J entity object (plain old java class) is fine, and the notion of using simple java beans for your model is widely recognized as a fine option for J2EE applications.
For example, check out Rod Johnson's book called "Expert one-to-one: J2EE Design and Development" which covers this subject excellently.

Excel allows array arithmetic (e.g. sum(a1:a5* b1:b5) where the contents of the cells are the results of formulae. Numbers only allows constants in the array cells. Right? Any work-arounds?

Excel allows array arithmetic (e.g. sum{(a1:a5* b1:b5)} where the contents of the cells are the results of formulae. Numbers only allows constants in the array cells. Right? Any work-arounds?

CJPerry wrote:
Any work-arounds?
There is a very simple one : use libreOffice.
Yvan KOENIG (VALLAURIS, France) dimanche 1 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios

How to specify only possible owner of the VM in Hyper-v cluster (Windows 2012R2)

Good day,
We want to prevent the migration of
virtual machines between the cluster nodes in indows 2012R2 Hyper-V cluster.
How to specify only possible owner of the VM in Hyper-v cluster (Windows 2012R2) ?
SQL clustering

Hi Al_leont,
I ask if your using FOCM or SCVMM as you configure possible owners in different places. As well as possible owners you can also configure preferred owners, affinity and anti affinity groups and placement rules.
To configure possible owner in FOCM you select the VM you want to configure, then in the bottom window select the resources tab (change from summary tab). Right click the Virtual Machine Resource, then select the Advance Polices tab of
the popup window. You should then see the hyper-V nodes as Possible owners.
In SCVMM you just right click on the VM and select properties, then settings form the popup window.
Preferred owners, affinity and anti affinity groups, placement rules are configured in other locations or by PowerShell.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

How to delete only a portion of the data portal?

This would be similar to DataDelAll() command, but allow only a limited set of data to be removed.
For some background:
- DIAdem 9.1 sp2
- LabVIEW interface calling various DIAdem/VBS scripts
Using DIAdem to format reports based on various scripts and TDM data
results, I would like to be able to load and unload various data files
(TDM) while maintaining the specific report layout (also TDM) data in
the portal. Two (ugly) options seem to be:
a) load entire data result set into the portal (including layout instructions) and process, or
b) keep track of layout state variables and clear portal/reload layout/load next data
This would all be easy if there is a command to enable the right-click delete... behavior of the data portal UI.
Thanks!
James

Hello James,
there are diufferent commands you can use to delete only a portion of the data in the portal. You can delete single channels, a selection of channels, or entire groups with these three commands:
Call ChnDel(ChnArg) - deletes one channel
Call ChnDelete(ClpSource) - deletes a selection of channels
Call ChnSDel(ChnArg1, ChnNo) - delets a number of channels
Call GroupDel(TargetGroupIndex) - deletes a group including its channels
To create a selection of channels as argument for the second command, have a look at the functions
ChnSelAdd, ChnSelGet, ChnSelCount
Regards
Ingo Schumacher
Systems Engineer Sound&VibrationNational Instruments Germany

Only allow specific USB device GPO - Existing drivers question

My employer is introducing a policy that only a specific model of USB drive will be allowed on our IT infrastructure in the future, and I need to restrict the estate so they cannot use any others.
I have successfully tested & configured the following settings:
Allow installation of devices that match these device IDs
Prevent installation of devices not described by other policy settings
Which works to allow the approved device and block any other new ones. The problem is that any USB storage device that was installed prior to the GPO going live can still be used, unless it is explicitly uninstalled. I have confirmed this in testing across
multiple devices/reboots.
Is there any way to force all USB storage drivers to uninstall/other way around this? We have a large estate over a wide area, so it not feasible to uninstall all old drivers manually. Thanks!

Just a note for anyone else in a similar situation. I haven't found a way to do what I require using Group Policy:
-Two policies exist that can block all USB storage devices from running or installing, including previously installed devices
OR:
-Can block all USB devices except approved device, but have to specifically allow all other desired classes, and has no affect at all on any USB device, including storage, already installed on the computer.
As a result we are now looking at third party tools to control device access.

How do I only allow certain users to print in color?

Product Name: HP Color LaserJet Professional CP5225dn Printer (CE712A)
Operating System Installed: Windows 7 Enterprise (64bit)
I work at a K-12 school and purchased the HP Color LaserJet Professional CP5225dn Printer (CE712A) for use in our computer lab. I would like to know if it is possible to have it so that only certain users can print in color (possibly put a password on it). I know the cost for color is higher, and therefore, would like it so that students have to approve through teacher if they want to print in color.
We are running it on our Print Server (networked) not through USB.
Thank you for the help.

Hi,
That's a very good question actually. In my corporate networks, we are talking about hundreds of laser printers and the ONLY thing we can do: only allow people access to a set of mono laser printers, not all printers. For example, the following printer is using B&W as default but can't stop users to print in colors if they could access to the resourse:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to repaint only a portion of the Screen

We are developing Graphics based application where we need to call repaint method again and again. Now repaint method repaints the whole screen but we want it to repaint only a portion of the Screen. Is it possible ? if yes then how ?
Thanking You in Advance,
Ketan

repaint()
Repaints this component. This method causes a call to this component's update method as soon as possible.
repaint(int�x,y,width,height)
Repaints the specified rectangle of this component.
Noah

How to change only one attribute at the host

Hi experts,
we use host configuration with special host types. If we want to change only one attribute of the host with the cli we must change all attributes associates with the host. If we define only one new attribute all other values are set (back) to the default of the host type..
(in the gui all works fine...)
Is there a chance to change a only one attribute and keep all other attribute values of the host ?
Thanks,
Chris

No, it is not possible to do that.
All attributes (passed via -attr) are treated as a single argument to the host modification (similar to a name or description). Essentially, when you provide a -attr argument to hdb.h.mod, the command will reset the existing overridden attributes and consider only the new attributes coming thorugh the -attr arg for overriding.
You see it working from the UI properly because, the UI requests for overriding all atributes once again, even though you manually changed only one attribute.

How to modify developers' access to limit the ability to migrate projects?

In PeopleTools 8.48 how to modify the developers’ access to limit the ability to migrate projects ?
Thanks in advance for your help.

Yes you can do this through Permission lists.
Create a new permission, on Peopletools tab, click Tools Permissions
Set Upgrade to No Access
All these settings are defined in Peoplebooks - PeopleTools 8.49 PeopleBook: SEcurity administration, Setting up Permission lists
There is a section called Tools Permissions.
Note: PeopleSoft Administrator Role overrides this value.
Example:
Permission DEVELOP - has the settings above, to No Access for Upgrade.
This Permission list is in 90DEVL, 90QA, 90PROD.
If you give Develoers - PeopleSoft Administrator role in 90DEVL, 90QA .. They could copy projects between 90DEVL and 90QA, but could never copy to 90PROD.
It depends on how much control between development instances you want in regards to copying projects.
Pam

Cisco ACS 5.3 - How to only allow specific AD groups to login

Can anyone help me figure out what I have wrong or have missing?
I've configured three specific AD groups, Admin, Storage, and HelpDesk, with their own commands sets.
This seems to be working fine, but everyone can log into everything, but they can't do anything except exit.
My goal is to not allow anyone to login that is not part of the three AD groups I have specified with the respective command sets.
All the logins hit the Admin account, even though the id in AD is not in the that AD group. I have something screwed up.

Check your authorization rules, make sure the default rule isnt set to Permit. Group Mapping is only mapping AD groups to internal ACS groups, we need to check your authorization rules to see which policies they users are hitting, you may want to reset the hit count and test to see which policy is allowing access.
Thanks,
Tarik Admani
*Please rate helpful posts*

How do I only allow SPECIFIC webpages the ability to refresh or redirect?

Similar Messages

Maybe you are looking for