How do I open a file with an .msg extension please?

Hello, can anyone tell me how I can open a file with an .msg extention please?

On a Classic operating system, which predates 2001, it may be difficult, except with a really old version of BBEdit Lite from http://www.barebones.com/
Newer versions of BBEdit or Textwrangler can probably also open it if you don't have a Classic operating system.
Microsoft Entourage and Outlook can probably also open such documents.   Outlook Express was available for Classic operating systems as well, but it may be too new for it to read those documents.

Similar Messages

  • I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

    # Question
    I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

    You probably have not seen anyone reporting the exact same problem as you. All three crash reports have the same crash signature and as currently ranked 67 it is not the commonest of reasons for a crash.
    I hope you enter your email contact information when reporting crashes. I note you see this crash when using videos, others may possibly see this crash in other circumstances.
    You have already tried the obvious, attempts at a fix so it is now down to wait and see, maybe developers working on the bug will report something or fix it.
    Did you try my suggestion of installing portable ESR ?
    For forum cross referencing purposes
    * Crash Reports for Crash IDs <br />bp-71697f5d-41d4-48ae-9db9-3e6302130607<br /> bp-6e1347bc-153f-433a-9c35-a5f022130607<br /> bp-92a533a2-9e09-4c1e-8df7-deb4c2130607
    *(all three) Crash Signature: EnumSoftwareMFTs(_GUID const&, unsigned int, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, IMFActivate***, unsigned int*)
    * Related bug 858667 NEW crash in mozilla::wmf::MFTEnumEx @ EnumSoftwareMFTs
    *I note this was first seen in Fx21 and is 100% Windows 7
    <br />

  • What application can you use to open a file with the .acc extension?

    What application can you use to open a file with the .acc extension?

    http://www.fileinfo.com/extension/acc

  • How do i open CR2 files with photoshop cs5?

    Adobe camera raw will not open CR2 files in photoshop. How do i open these files? i have tried updating camera raw witht he last 8 updates but it still will not open. Camera raw shows a pop up box saying the file is not supported.

    mushybutt wrote:
    I believe the proglem is with in Adobe CS5 and something just isnt working correctly and that maybe why it cant read or do anything with RAW files. I also noticed that Adobe's site says that it supports canon 70D CS2 files. my camera files are CR2, im not sure if maybe that might have something to do with my issue.
    Nothing to do with anything being faulty in CS5.
    The reason has already been given by tpolakov above: The 70D was first supported in Camera Raw 8.2 which is only compatible with CS6 and later. CS5 is not compatible with Camera Raw 8.2 so CS5 cannot read Raw files from the 70D. That's all there is to it.
    mushybutt wrote:
    Thanks Tomsm13, I actually tried to convert the files to DNG but that doesnt work either. I used the latest compatable Adobe DNG converter and i get a message that it can not find any camera RAW files to convert.
    You select a folder containing CR2 files, not a CR2 file.
    See Camera Raw: How to use Adobe DNG Converter - YouTube
    From 1.40 onwards.

  • TS3778 How do I open MP4 files with VLC?

    How do I open MP4 files? I have VLC open on my desktop but cannot manage.

    mushybutt wrote:
    I believe the proglem is with in Adobe CS5 and something just isnt working correctly and that maybe why it cant read or do anything with RAW files. I also noticed that Adobe's site says that it supports canon 70D CS2 files. my camera files are CR2, im not sure if maybe that might have something to do with my issue.
    Nothing to do with anything being faulty in CS5.
    The reason has already been given by tpolakov above: The 70D was first supported in Camera Raw 8.2 which is only compatible with CS6 and later. CS5 is not compatible with Camera Raw 8.2 so CS5 cannot read Raw files from the 70D. That's all there is to it.
    mushybutt wrote:
    Thanks Tomsm13, I actually tried to convert the files to DNG but that doesnt work either. I used the latest compatable Adobe DNG converter and i get a message that it can not find any camera RAW files to convert.
    You select a folder containing CR2 files, not a CR2 file.
    See Camera Raw: How to use Adobe DNG Converter - YouTube
    From 1.40 onwards.

  • How can I open RAW files with PSE 12 from Olympus o-md e-m 10?

    How cam I open RAW files ? I use PSE 12, the Olympus om-d em 10 and windows 7.

    Photoshop Elements 12 should be able to recognise raw files from the OM-D E-M10.
    Check which camera raw you currently have by loading the editor, going to the Help menu and selecting About plug-in -> Camera Raw
    If it not at version 8.5 then go to the Help menu and select Updates
    Brian

  • How can I view a file with an *.apple extension?

    Hi all,
    I did a search and couldn't come up with any threads that may have discussed this. My apologies if I overlooked any results.
    Anyway, I was doing some file recovery on my SD card and this f2754624.apple file popped up at around 600mb. I'm guessing it was some video shot with the digi. It's kind of old and I'm kind of curious what it is haha.
    So any clue as to how I can open said file? Thanks in advance for any assistance I can obtain from you all.

    "not supported, or might have been damaged."
    That's key. If you're using Safari to download PDFs, it can do this.
    Trash the SPD file. It can't be repaired.
    Download the Adobe Reader FULL installer here: http://get.adobe.com/reader/enterprise/
    Save the DMG to your downloads folder.
    Go to: Mac HD/Library/Internet Plugins
    Trash the AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin files.
    Empty the trash.
    Download AppZapper (it's a free trial) and install it.
    Launch AppZapper, and drag the Adobe Reader app to the window.
    "Zap" it and anything else in the window to the trash.
    Empty the trash.
    Install Reader from the downloaded DMG and re-download the SPD file.

  • Is there any way to open a file with a .msi extension on my new mac?

    I have Camtasia from the pc I was using. It has a .msi file extension for the installation file. Is there any way to open the Camtasia installation file with the .msi extension on my new Mac?
    Thanks,
    Jerry

    That's a Microsoft program which requires Windows. You could run on your Mac if you install Windows on it.
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows 7 or Windows 8.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • How can I open a file with an SPD file extension?

    Hi
    I have started a course for which I have received some literature in pdf format. I have made hand written annotations to a pdf file using my Samsung Note tablet, which I have then put into Dropbox, with the intention of storing on my IMAC.
    I then tried to open this file on my IMAC but received a message that Adobe Reader couldn't open it as the file was not supported, or might have been damaged.
    Any ideas on how I might be able to get around this problem?
    Do I need something other than "Reader"?
    Comments will be very gratefully received by this novice user
    regards

    "not supported, or might have been damaged."
    That's key. If you're using Safari to download PDFs, it can do this.
    Trash the SPD file. It can't be repaired.
    Download the Adobe Reader FULL installer here: http://get.adobe.com/reader/enterprise/
    Save the DMG to your downloads folder.
    Go to: Mac HD/Library/Internet Plugins
    Trash the AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin files.
    Empty the trash.
    Download AppZapper (it's a free trial) and install it.
    Launch AppZapper, and drag the Adobe Reader app to the window.
    "Zap" it and anything else in the window to the trash.
    Empty the trash.
    Install Reader from the downloaded DMG and re-download the SPD file.

  • How to open a file with a .bbb extension?

    How do you open a a file with .bbb extension on a Mac?

    ibopyoubopwebop wrote:
    What happens if i decide to buy a non BB phone.
    You can restore only to a BlackBerry device, and then once you copied what you wanted to the storage of your choice (computer or cloud). you can then copy it to whatever device you choose.
    But to get the information from the backup file, you will need to use a BlackBerry 10 device
    Using the Playbook and the Z10 and the Z30 and loving them
    Martin

  • How do I open iWork files with updated OS

    I updated to Maverick which also updated iWork.  Now I get the notice that I need the latest version of Pages or Numbers when I try to open files.  This happens with old files as well as files created in the latest version of iWork.  How do I correct this problem?

    Like you, I downloaded the new versions at the same time.  I just checked the version of Numbers and it said v 2.3.  When I go to Software Updates, it states I  installed v 3.0.  When I right click on a file, it shows v 3.0 as the default and I can open the file.  When I try to open Recent Files I don't have that option.  There appears to be a disconnect somewhere.

  • How can u open a file with .exe extension after it was unpacked?

    Thank you Linc Davis for THE ARCHIVER, I was able to unpacked the program. However, after it was unpacked, I clicked the file wtih .exe extension and I got a message that this file will not be extract with this program. Is there another way to open file with .exe extension after it was unpacked by THE ARCHIVER...??? Any assistance is highly appreciated.

    .exe files are Windows executables and do not run in OS X.  You would have to install Windows to use it.
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    1. Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    4. CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    6. Last is Q.  Q is a freeware emulator that is compatible with Intel Macs.  It is much slower than the virtualization software, Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • How do I open PageMaker files with InDesignCC?

    I don't need a discussion. I need a simple answer.

    The simple answer is you don't. The last version that could open PM files is CS6. Your CC subscription entitles you to download and install CS6 as well.

  • How can I open AutoCAD Files with layers?

    In Illustrator CC, I could open dwg or dxf files, but layers are merged(I tried all option when I saved in AutoCAD).
    In Illustrator CS6 I could open the files keeping layers. So I thought there is the way I can open the files in CC.

    That's a genuine bug as far as I know. Keep your CS6 handy...
    Mylenium

  • How do i open EPS file with "rasterize generic EPS format" options in photoshop CS?

    Hi please can someone help!?
    I'm using Photoshop CS on mac- when i open EPS format files i usually get the "rasterize generic EPS format" option so that i can select the size i want the file to be etc without losing quality. However on one file i've opened before i don't seem to be getting that option at all, if i open the EPs file it just goes to a standard size automatically and doesn't give me the chance to change the size.  This is the same file that i have used since being sent the file, i've not resaved it. It used to give me the rasterize generic EPS format option but it no longer works.  Any ideas how i can make those options appear when opening or how i can rasterize/resize it once open without losing quality?
    Just to be clear, i still get the rasterize generic EPS format option when opening other EPS files but it seems not with this one particular file.
    Many Thanks
    Ross

    Encapsulated PostScript-files can contain either vector-content (in which case one gets prompted when opening with Photoshop), pixel-content (in which case Photoshop opens straight away) or a mixture (same as the first case).
    When a file has been rasterized that’s that, You may want to go back to the original file if You can locate it.
    Edit: Sorry, I read Your original post carelessly …
    Have You tried opening the original file in Illustrator yet?

Maybe you are looking for