How do I open a Word file which was exported fron PDF?

how do I open a Word file which was exported from a PDF file?

Hi alansandy,
You can find your converted Word file stored in your Acrobat.com account at https://cloud.acrobat.com. You can download your file from your account by selecting it and clicking the Download icon. Then, you can open it right up in Word!
Best,
Sara

Similar Messages

  • How can I open Microsoft Word files on my iMac?

    How can I open Microsoft Word files on my iMac?

    You can even use the Pages app that is installed on your computer. Finally you can buy a license of Office for Mac and have Word, Excel, PowerPoint and if you want Outlook too.

  • I wrote a assignment in the microsoft word 97-2003 doc but by mistake replace in the same name but with different thing . how can i retain my orinal file which was as Basel III and Banking law

    i wrote a assignment of almost 2500 words in the microsoft word 97-2003 doc but by mistake replace  a table only in same name  . how can i retain my orinal file which was as Basel III and Banking law

    Hey Christian
    Thanks I havn't seen that post, busy trying it now but no luck so far.
    I defined it in the second one (Content Management - Utilities - MIME Types).
    Tried it now in NWA, no luck either . . .
    What I noticed is no matted what it is defined as in NWA or Content Management, the properties of the mht file still shows Binary File (application/octet-stream)
    Any ideas?
    Regards
    Antonette

  • How do I open a GarageBand file that was emailed to me?

    How do I open a GarageBand file that was emailed to me?
    I have GarageBand...I just can't figure out how to get it to GarageBand from my yahoo email.

    I guess that is my problem...because I can't figure out how to save it. I forgot to mention that I'm using and iPad2 and not a pc or workstation. Thanks for the suggestion Christoph! Anyone know how I can save a garageband attachment from yahoo email to an iPad?

  • How do I open a WORD document which is password protected?

    I need to open a word document, which is password protected.  I can't even get to a page that'll allow me to put in the password!!!  Can anyone advise how I can do this?
    Thanks.

    Hi JoeyR.
    Thanks for your reply.
    I get the following message when I try to open the document: "The Word document is password protected and can’t be imported".
    I've looked at the Open Office software, as you suggested, but it seems confusing.  I'll give it a try, though, as I'm wasting too much time!
    Fingers Crossed!

  • How can I open a keynote file that was made in Keynote Beta and downloaded from the web?

    I have Keynote version 5.3
    I want to edit a Keynote presentation made originally in Keynote Beta on the web.
    When I download it in .key it wont let me edit the file because it says I need a newer version of Keynote.
    When I try to download Keynote 6.0.1 I'm told I can't because I need a newer operating system!! I currently have 10.7.5 and there are no new updates.
    Can I NOT open a keynote file that was made in Keynote Beta??!

    Dude, the FCP-X forum is located here: https://discussions.apple.com/community/professional_applications/final_cut_pro_ x?view=discussions
    This is the Final Cut Studio forum.  There are no similarities between the two.
    -DH

  • How can I edit a word file created with Export PDF?

    I can add text boxes, but I can't add text in other places.

    Hi Jkostka,
    For starters, please try triple-clicking in the text block that you want to edit. If that doesn't work, we would need to take a closer look at the PDF that you converted. Do you know how it was created? If you don't, please open it in Adobe Reader, and choose File > Properties. The document creator is listed in that dialog box.
    I look forward to hearing back from you.
    Best,
    Sara

  • I encountered a bit of difficulty opening a .Tif file which was saved in CS5?

    This problem occured three times before the file finally did open in CS6.

    I am using an hp laptop dv7t, it runs win 7 64bit and has an intel graphics co-processor.
    The machine has a total of 6 gig of ram. 
    The processor is an i5 cpu M460 @ 2.53GHz.
    The fact that the system had difficulty opening the .tif  it has opened without further problems after re-boot several times.  I've opened approximately 50more .tif files without incident.

  • How to open damaged word file?

    I m trying to open MS Word Document file, MS word files are showing error message like word 2003 
    doesn't open file, I have important document file got corrupted, so How to open damaged word file? 
    If you have any answer please help assist me.

    When a Word document file is corrupted, then you can try several methods to recover it:
    1. First of all, you can try the recovery function integrated with Microsoft Word, as follows:
    1) On the File menu, click Open.
    2) In the Look in list, click the drive, folder, or Internet location that contains the file that you want to open.
    3) In the folder list, locate and open the folder that contains the file.
    4) Select the file that you want to recover.
    5) Click the arrow next to the Open button, and then click Open and Repair.
    You may find more information about this at:
    http://office.microsoft.com/en-us/word-help/recover-the-text-from-a-damaged-document-HP005189610.aspx (for Word 2003)
    http://support.microsoft.com/kb/893672/en-us (for Word 2007/2010/2013)
    2. If 1 does not work, then you may try third-party tools such as DataNumen Word Repair at
    http://www.datanumen.com/word-repair/
    It provides a free demo version so that you can try to see if the data you want can be recovered or not.
    Good luck!

  • How can I open and edit files that were developed and published by ftp to my host on my old macbook, which I can no longer access.

    How can I open and edit files that were developed and published via ftp to my host on my old macbook, which I can no longer access. The HD containing the files cannot be accessed. I want to be able to download the published files to be edited in iweb?

    You CAN'T download published files and then edit them in iWeb because iWeb can't open them - it has no import facility so is unable to open any html or css files - a previously published site.
    You can download these files yes, but you'll need to use them as a guide or to cut and paste text from there whilst you re-build your site in iWeb.
    The only other way is to download the files and then open them with an html editor such as TextWrangler or use one of the other web design programmes out there that is capable of importing html and css such as Dreamweaver of Flux 4.
    These are your only alternatives as iWeb can't import and if you want to continue to use iWeb, then you'll have to re-build your site from scratch.  If you do just remember to back up your domain.sites file this time around - it is found under your User/Library/Applicaion Support/iWeb/domain.sites.

  • How do i open an Appleworks file now that I am running Mavericks and Pages?

    How do I open an Appleworks file now that I am running Mavericks and Pages?

    Word Processing documents can be opened directly in Pages 4 (AppleWorks 6 only) but this is no longer available - the newPages 5 (Mavericks required) does not open AppleWorks documents. Panergy Software's docXConverter v3.2 ($19.95) can convert Appleworks 5 and 6 Word Processing documents to RTF (though it has been reported that it can only handle documents which contain only text, not those which include images or frames). The latest version of the free LibreOffice has announced that it can open AppleWorks 6 Word Processing documents and an ability to open ClarisWorks documents has been reported: it does appear to be able to handle at least some embedded images.
    Draw Documents can be opened directly only in EazyDraw (the more expensive version from their website, not the cheaper one from the Mac App Store, and you will need v4.0 'Retro' not the most recent version) or Intaglio (though this appears not to be able to handle very complex drawings). LibreOffice will open simple Draw documents but I found it very unreliable with complex ones.
    Spreadsheets can be opened directly only in the older versions of  Numbers - the new version for Mavericks will not do this. The old version is no longer available.
    Presentations can be opened directly only in the older versions Keynote; again, the new version for Mavericks will not do this. The old version is no longer available.
    To use other programs, or open Database documents at all, you must export from AppleWorks first, which means you need a way to run it.
    If you have upgraded to Lion/Mountain Lion/Mavericks and have AppleWorks documents you cannot open, then you should be able to install Snow Leopard on an external hard disk and start from that (provided that the Mac did not come with anything higher than Snow Leopard originally installed); and success has been reported in running Snow Leopard Server under emulation in Parallels - the method is described here: Snow Leopard Server is available in the Apple Store (by telephone) at a reduced price (at the time of writing) and is preferable to using ordinary Snow Leopard which is quite tricky. I haven't tried this myself: use at your own discretion. You can then run AppleWorks as an emergency measure.

  • How do I open a .m4a file from Mail into Music app?

    How do I open a .m4a file from Mail into Music app?
    I mixed down a song from my band's latest session and saved it as a .m4a file (Apple AAC Audio format) and I e-mailed it to myself. Then on my phone I opened the e-mail message in Mail and held a long-press down on the attached .m4a file. But I do not see the option to open it up into the Music app. It only gives me the options of iMovie, WeChat, and USB Disk. Why would I want to open it up in those? It's a song. It should open up into the Music app so I can play it. What the heck?
    Please don't tell me that I have to use iTunes to do this and sync my phone to my computer, because I *do not* want to add these songs to my iTunes library. They are *practice session tracks* that I want to listen to then delete later when we have new versions.
    If there is no way to open them into the Music app, then is there a music player app I can get somewhere that will let me simply save audio files from Mail into it, and use it as a player for those songs? That's all I want to do.
    The only reasonable workaround I have found so far is to save them as .mp4 audio files, which the iPhone thinks are movies, so it lets me save them into the camera roll as Videos.
    Voice Memos would be acceptable as a place for them to be able to open into as well, but of course that's also not on the options list. Sigh.

    TJBUSMC1973 wrote:
    You'll have to use iTunes, add it to your iTunes library, then sync it.  You can always delete it from your iTunes library later.
    Why is that such an issue for you?
    Why do people insist on replying to threads without even reading the original post? I explained it there already!
    I don't have to use iTunes to save an image from Mail into my camera roll, or to save a PDF from Mail into iBooks. Why should I have to use iTunes to save a music file into Music app?
    But I'll repeat it since evidently you can't be asked to read the original posts before spamming a thread with questions that have already been answered. I *do not* want to add these songs to my iTunes library.
    My iTunes library is a sacred temple into which I only allow to enter the very best and highest-fidelity musical recordings of all time. I refuse to sully and soil my iTunes library with crappy practice mixdowns from my band, etc.
    Want to know why? Because I like to be able to hit "shuffle all" on my iTunes library and know that something that will improve my existence will emanate forth from this amazing device that I have invested thousands of dollars into (yes, I count my cell phone plan amongst the expenses).
    I shall not have the crappy burner mixdown tracks from my band's practice sessions come up every five songs (we generate TONS of these... literally hundreds... and they are all high-bitrate .m4a tracks in the 10-15 MB range). I let iTunes keep my music folder organized on my computer. It makes copies of everything being placed into it, and I don't want 159 GB of copies of burner tracks hiding like roaches throughout my temple. We don't name these files anything sensible (in fact the guy who mixes them down intentionally gives them random weird names) and they lack metadata. So there's no easy way to delete them back out of iTunes once they're in there. It's a huge pain; I used to do it, but I swore it off years ago and *I'm never going back!*
    The REAL question is, why does Apple force me to have to use iTunes—the most convoluted, kludgy piece of bloatware ever to issue forth from Cupertino—to do something as simple as adding an MP3 from Mail into the Music app on my phone? Why can't there be something simple—something equivalent to the Camera Roll inside the Music app, not only for the files I want to save from Mail, but also for my Garage Band exports, not to mention all the exports from all the various synthesizer, drum machine, and recording apps I use on a daily basis in iOS?
    It would be awfully nice to be able to play the songs I've recorded right in the Music app without having to go through the rigamarole of adding those files to my iTunes library, tagging them with metadata, syncing, etc. etc. yadda yadda yadda—just to delete them again as soon as I've synced so they don't pollute my computer's iTunes library!
    I bought Apple for ease of use, not so I would be forced to jump through a million hoops just do to something that ought to take one tap to accomplish!  That's ridiculous!

  • How do I open a .fdf file downloaded from the internet?

    Hello =-D
       I have been on a website many times in the past and opened pdf files. Today however, I have been trying to download an adobe file, and its showing up as a .fdf file. When I click to open (or drag and drop) I keep getting this error message:
    This PDF is attempting to launch:
    [insert file location here]
    Are you sure you want to continue?
    [Yes]
    [No]
         When I click on yes, I get the same repetitive error message and nothing opens. I have tried about 30+ yes's and still nothing.
    I am running windows 7 professional with Adobe XI. I know I have opened this file on this computer in the past, I do not know why it will not open now. It has been about 8 months since I have tried though...
    Thanks peeps =-)
    ~Firedogjoe

    Hi Graffiti,
       Thank you for providing the website... After looking over the website you provided, I am still a bit confused. I will break it down for ya =-)
    FYI, I am not that computer savvy, but I am sure you will figure that out by the end of this post...
    It states:
       The easiest is when the PDF is set up to import the FDF
    programmatically (using a JavaScript to import the FDF), or has the
    Import FDF action. In both cases, the FDF file name is specified.
    Q: How do I get Adobe to set up PDF to import FDF programmatically?
    It states:
       Another possibility is if the FDF has the reference to the "base PDF"
    included. In this case, opening the FDF will automatically load the
    according PDF. If the base PDF is already open, the data gets
    imported immediately.
    Q: How do I know if the FDF has a reference to the "base PDF"?
    Statement: If it should "Load automatically", I would not have an issue... or am I reading this wrong?... #confused
    It states:
       You can also try to open an FDF file which does not have the
    reference to the base PDF; it will then ask for the PDF to be loaded
    into.
    Q: How do I know if the FDF does not have a reference to the "base PDF"?
    statement: Nowhere do I see it asking for the PDF to be loaded...
    Thank you
    ~Firedogjoe

  • Open MS word file in read only mode

    Hi All,
    Is there any function module or method to open an MS word file (which is not read only ) in read only mode.
    User should only be able to see the document ,he should not be able to make any changes.
    Regards,
    Mukul Sharma.

    Hi,
    Where is the document stored? In a content server? In BDS? In a directory?
    Regards,
    bert

  • Opening MS WORD files in Appleworks

    I never bought MS Word during the 30 day trial. Now it looks like I'll be getting a bunch of Word documents sent to me in the near future.
    I read somewhere here that Word files can be opened in Appleworks. I've had no success with it so far. Could someone please tell me how to do that?
    Or, If I do have to buy MS Word For Mac, is there a cheap way to do it? Like an old version or something other that the $250+ they're asking for the new one?
    Imac   Mac OS X (10.3.9)   1.25 GHz 512GB RAM 80GB HD with 120 GB XTNL.

    You certainly don't need to buy Office. There are several options available.
    TextEdit that is included with OS X can open most Word files.
    One of the free Office clones - NeoOffice or Open Office for any Office file. Also, AbiWord, but only for Word files.
    icWord from Panergy Software - not free but the trial is fully functional. icWord also has the ability to save as AppleWorks. There is also icExcel. These are approximately $20 (US) each or $30 for both.
    Pages, part of iWork, can open Word files.

Maybe you are looking for

  • PLSQL function body returning an sql report returns ORA-01403 No Data Found

    I am on APEX 3.1.2.00.02 and Oracle 10g. I am developing a report with SQL Query (PL/SQL function body returning SQL query) type. But on running the report I am getting report error: ORA-01403: no data found Region Source declare   qry varchar2(32767

  • I bought Photoshop Elements 12, and cannot find my serial number on the box?

    Hey, I seem to not be able to find my Adobe Photoshop serial number on the box I bought it in, and I still have all the packaging and yet I can't find it Where might this number be found ?

  • Why can't Verizon stop charging me for Navigator when it has not been used?

    I have been going to your store in Bend, OR every month due to your failure to correct a charge for over a year. It is $9.99 for VZNavigator on xxx-xxx-xxxx. I would like written proof of these charges & usage because when I take action, I would like

  • Bug: Scrolling through large image in email

    It is not possible to scroll through a large image in an email. One can only either go excruiciatingly slowly, or the view just flies at full speed from one side of the image to the other, with no way to view parts of the image that are not on the ed

  • E4200 - Not good coverage

    I have purchased this Linksys E4200 seeing good star rating at Amazon. Surprisingly the device not good for coverage what it claims. I am in a 1516 SqFt house and hardly any L bends and this signal does not reach even from 20 Ft distance. If door (wo