How do I open an ABAP program from SAP in Eclipse?

Hiya,
Sorry for the newbie question but I've only ever used SE80, but I saw eclipse, liked it, installed it (based on the ADT Installation guide) but now I'm stuck. How do I connect Eclipse to an SAP instance so that I can view and amend ABAP programs?
Thanks in advance for any advice.

Hi Robert,
if you installed everything correct, you have to create a new ABAP-Project. This links your sap-logon with eclipse and you are able to connect to a system if everything is fine...
Working with ABAP Development Tools (Quick Launch)
Hope this helps you out, otherwise your in the correct space and here are a lot of documents and blog-posts how to handle eclipse at all (including the installation)
Regards
Florian

Similar Messages

How to get data in ABAP program from multicube in external BW system

Hi friends,
     I want to get data from one multicube which resides in an external BW system, in my ABAP program internal table. Is there any SAP standard RFC / BAPI for this or is there any other way around or I have to design my own program to get the data ?
    To make my requirement clearer, my ABAP program is in one BW box and the above mentioned multicube in another BW box. I want to get data from the multicube into my program.
    Any help is appreciated with points.

Look at the following FM; you may find the FM RSDRI_INFOPROV_READ_RFC useful.
Call the FM in your program and read data and update.
RSAD_INFOCUBE_READ_REMOTE_DATA
RSDRI_INFOPROV_READ_RFC
Ravi Thothadri

Call ABAP Program from outside SAP

Hi all,
How can I call an ABAP program from outside SAP, for example from a C++ executable, a .NET assembly or a JAVA package ? Are their "adapters" provided by SAP for this ?
Angela

Hi Angela,
as mho already stated:
For external connections to ABAP, the sap-proprietary "remote function call (RFC)" is a common way.
SAP delivers an RFC-library for this, and for some development environments SAP even offers a connector on top of this library to make connectivity more easy (SAP Java Connector, SAP Business Connector, SAP Connector for Microsoft .Net). An RFC is always starting function modules in ABAP, not ABAP programs, and these function modules need the attribute "remote-enabled".
(Remark: in the context of SAP NetWeaver Process Integration, SAP offers adapters for connectivity, also for ABAP systems.)
For ABAP systems on basis code line 6.20 and above, the remote-enabled function modules can externally be used as web services.
Information on RFC can be found in the SAP Help Portal http://www.help.sap.com, e.g. [RFC Call - Example Program|http://help.sap.com/saphelp_nw04/helpdata/en/3d/733760ccb411d2b4550060941936e3/frameset.htm]. A search in SDN provides links to the Help Portal as well.
>
Angela GALACY wrote:
> For example, what if I develop an EJB inside NetWeaver, will I be able to access this from any J2EE client ?
This part is beyond the ABAP question, and my guess is pretty simple: like on any other J2EE server.
Regards, Boris

How to translate the key words in ABAp program from lower case to upper cas

How to translate the key words in ABAp program from lower case to upper case?

Hi Kittu,
You need to set the Pretty Printer settings to achieve key words in ABAP program from lower case to upper case.
Utilities -> Settings -> Pretty Printer (tab) -> Select third radio button.
Thats all.
<b>Reward points if this helps.
Manish</b>

How to access the abap program from MS Excel?

Hi ,
How to access the abap program from MS Excel or MS access ?
The abap program "z..." has the below input and output attributes
Input : Date,Index and file name with location (.htm or .xls)
Output : htm or xls file downloaded at the above location.
Please help me here.Do we haev to use BAPI and RFC?If yes,please tell me how to use them
Regards
Dinesh

Maybe this could help you up -;)
[Simple SE38 Emulator using Microsoft Excel|Simple SE38 Emulator using Microsoft Excel]
Greetings,
Blag.

How to copy wd for abap program?

Hi SAP GEARS!
I'm developing a program (wd) in Minisap when i have not a net connection. How can i copy the wd program from this minisap to a real workplace?
A solution is caching data and cofile files but in standard minisap instalation the transport layers are not configured
so, there is someone with enough goodness to help me with this thread?
Tanks!

Hello,
If you want to download a Web Dynpro Component to your PC for moving between systems that aren't connected via transport, then I suggest that you look at SAPLink: http://saplink.org
SAPLink is an Open Source community project for downloading and uploading ABAP development objects in XML format via simple report instead of the transport system. There is a plug-in for SAPLink that supports Web Dynpro Components.
Hope this helps!
Regards,
Srilatha M

Call an ABAP Program from Web Application designer

Hi Gurus,
I have an requirement in which I need to fetch an CSV file from the server and place the file into an internal table in R/3.I got the function module and wrote the program for this,but now I need to call this ABAP program from Web Application designer.
To make it more explicit ,I need to call an ABAP Program /function module from the WAD.I am new to WAD Please help.
Ankit

Hi Ankit,
take a look:
/thread/725385 [original link is broken]
WAD and ABAP
How to call a ABAP or ABAP Class from the WEB
/people/kai.wachter/blog/2008/03/11/how-to-write-own-items-in-bi-70-java-runtime
Regards
Andreas

Call an ABAP program from BIW

Hi experts,
How do I include an abap program in R/3 sandbox in my process chain in BW.
I know how to do it in BW but this program is in the ECC sandbox.
what I did was to create a job in R3 through SM36,this job had two steps one to run my program and another step to call the FM RSPC_ABAP_FINISH,which would inform the PC that the job is executed and continue to the next step.
I was triggering this job trough an event in R3.
In my PC I added a process type ABAP program,where i made an asynchronous call to the event in the ecc sandbox.
But this is not working.Any ideas?
Regards
Ankit

Hi Ankit,
take a look:
/thread/725385 [original link is broken]
WAD and ABAP
How to call a ABAP or ABAP Class from the WEB
/people/kai.wachter/blog/2008/03/11/how-to-write-own-items-in-bi-70-java-runtime
Regards
Andreas

Removing or destroying an ABAP program from memory

Hello!
Is there a command to kill, unload, remove or destroy a previously called ABAP program from memory? Let me explain what I'm trying to do:
I'm doing some WM developments and I use the function L_TO_CONFIRM to confirm transfer orders. This function belongs to function group L03B (program SAPLL03B) and eventually it makes external calls to subroutines belonging to program SAPML03T.
If my Z program calls this funcion, the SAPLL03B program is responsible for loading SAPML03T into memory and everything works fine. The loaded programs list (on the debugging menu) are like this:
No     Program          Group with
52     SAPLL03B
78     SAPML03T      52
This is also what I get if testing L_TO_CONFIRM from SE37, where it also works.
But I wanted to reuse some subroutines from SAPML03T on my Z program, so I call something like this:
PERFORM set_quit_icon(sapml03t) ...
This call happens before the function call, so SAPML03T gets loaded by my Z program first, and stays on the memory. The list of loaded programs then looks like this:
No     Program          Grouped with
1     ZWMO_023
27     SAPML03T       1
So after calling the external subroutine in SAPML03T, I do some more coding and finally call the function L_TO_CONFIRM. Inside this call, my list looks like:
No     Program          Group
1     ZWMO_023 => My Z program
27     SAPML03T       1
28     SAPLL03B
So SAPML03T is grouped with my Z program and not SAPLL03B as it would be if I hadn't called the external subroutine first.
Now, the problem:
Since SAPML03T and SAPLL03B apparently share some global data (at least global workarea/table LTAK), in a normal call (SAPML03T)LTAK gets filled by a select statement and instantly (and somewhat inexplicable from what I new until now) (SAPLL03B)LTAK also gets filled by the same data. Well, I've only seen stuff like this with field-symbols but this is not the case. I would bet this two workareas would always be in fact two different workareas, but during the straight function call they are not. They are the same (I wish I could find their pointer addresses (like C++ stuff) to prove they were the same, but I couldn't). But if I call the external subroutine first and SAPML03T gets loaded, then I do have two different LTAKs and that's where I have problems, because L_TO_CONFIRM was coded considering this single workarea thing and when I have two, it doesn't work.

Yes, I tought about that.
As a matter of fact, just last week we had another global memory issue in a costing user-exit and we tried solving it with a STARTING NEW TASK. This initialy solved our problem, but this command leads to the opening of a new gui session, and when running this cost calculation procedure in the background, a short dump COMMUNICATION FAILURE was raised, probably because of the lack of a SAP GUI link. We then used DESTINATION 'NONE' and this solved the problem (I think it also opens a new LUW).
Also my WM problem is on a Z application that will be running under SAP Console, and I don't think opening a new GUI session with STARTING NEW TASK under SAP Console will work. I should try it anyway. - edited: I just remebered I did this a couple years go and it works
I could use DESTINIATION 'NONE' in this case too, since the funcion module is RFC-enabled already. There are a few ways to solve the problem (which is already solved by the way). My main question still is about removing a whole program from SAP memory through ABAP commands.
Thank you very much!

Call ABAP program from a process chain

Hi ,
Can anyone tell me how do we call an ABAP program in R3 from a process chain in BW.
Its real urgent please help.
Thanks
Ankit

Hi,
Create ABAP program in BI/BW system with name like ZFILL_CALL.
Create RFC enabled function module(eg: ZRFCFM) in R/3 system, in this function module call your program which fills the ZTABLE from application server.
Call RFC function module ZRFCFM from your program ZFILL_CALL in BW system.(u need to RFC connections to these systems).
Create process of type "ABAP program" which u will find in General sevices in RSPC. Attach this process befor u r inpackage process chain.
Hope it will work.
Sree

How to copy/download all ABAP programs in a text with a single report ?

How to copy/download all ABAP programs in a text format with a single report/TC ?
How to copy/download ABAP source code with all include programs ?....
we need to search & copy all include programs everytime....

Hi,
check this link
downloading programs
Regards

How can we disable the 'Improvement Program' from all the apps in TCS5?

How can we disable the 'Improvement Program' from all the apps in TCS5, so that the end users are not able to see the option in the help menu?
We have tried changing the value of bUsageMeasurement (HKLM\SOFTWARE\Policies\Adobe\(product name)\(version)\FeatureLockdown) to zero, but it did not help.

You’re probably going to have to contact Support on that one.

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to do that?

kahjot wrote:
Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere?

How do I open a .m4a file from Mail into Music app?

How do I open a .m4a file from Mail into Music app?
I mixed down a song from my band's latest session and saved it as a .m4a file (Apple AAC Audio format) and I e-mailed it to myself. Then on my phone I opened the e-mail message in Mail and held a long-press down on the attached .m4a file. But I do not see the option to open it up into the Music app. It only gives me the options of iMovie, WeChat, and USB Disk. Why would I want to open it up in those? It's a song. It should open up into the Music app so I can play it. What the heck?
Please don't tell me that I have to use iTunes to do this and sync my phone to my computer, because I *do not* want to add these songs to my iTunes library. They are *practice session tracks* that I want to listen to then delete later when we have new versions.
If there is no way to open them into the Music app, then is there a music player app I can get somewhere that will let me simply save audio files from Mail into it, and use it as a player for those songs? That's all I want to do.
The only reasonable workaround I have found so far is to save them as .mp4 audio files, which the iPhone thinks are movies, so it lets me save them into the camera roll as Videos.
Voice Memos would be acceptable as a place for them to be able to open into as well, but of course that's also not on the options list. Sigh.

TJBUSMC1973 wrote:
You'll have to use iTunes, add it to your iTunes library, then sync it. You can always delete it from your iTunes library later.
Why is that such an issue for you?
Why do people insist on replying to threads without even reading the original post? I explained it there already!
I don't have to use iTunes to save an image from Mail into my camera roll, or to save a PDF from Mail into iBooks. Why should I have to use iTunes to save a music file into Music app?
But I'll repeat it since evidently you can't be asked to read the original posts before spamming a thread with questions that have already been answered. I *do not* want to add these songs to my iTunes library.
My iTunes library is a sacred temple into which I only allow to enter the very best and highest-fidelity musical recordings of all time. I refuse to sully and soil my iTunes library with crappy practice mixdowns from my band, etc.
Want to know why? Because I like to be able to hit "shuffle all" on my iTunes library and know that something that will improve my existence will emanate forth from this amazing device that I have invested thousands of dollars into (yes, I count my cell phone plan amongst the expenses).
I shall not have the crappy burner mixdown tracks from my band's practice sessions come up every five songs (we generate TONS of these... literally hundreds... and they are all high-bitrate .m4a tracks in the 10-15 MB range). I let iTunes keep my music folder organized on my computer. It makes copies of everything being placed into it, and I don't want 159 GB of copies of burner tracks hiding like roaches throughout my temple. We don't name these files anything sensible (in fact the guy who mixes them down intentionally gives them random weird names) and they lack metadata. So there's no easy way to delete them back out of iTunes once they're in there. It's a huge pain; I used to do it, but I swore it off years ago and *I'm never going back!*
The REAL question is, why does Apple force me to have to use iTunes—the most convoluted, kludgy piece of bloatware ever to issue forth from Cupertino—to do something as simple as adding an MP3 from Mail into the Music app on my phone? Why can't there be something simple—something equivalent to the Camera Roll inside the Music app, not only for the files I want to save from Mail, but also for my Garage Band exports, not to mention all the exports from all the various synthesizer, drum machine, and recording apps I use on a daily basis in iOS?
It would be awfully nice to be able to play the songs I've recorded right in the Music app without having to go through the rigamarole of adding those files to my iTunes library, tagging them with metadata, syncing, etc. etc. yadda yadda yadda—just to delete them again as soon as I've synced so they don't pollute my computer's iTunes library!
I bought Apple for ease of use, not so I would be forced to jump through a million hoops just do to something that ought to take one tap to accomplish! That's ridiculous!

How do I open a PDF document from a website while in Safari on my iPad.

How do I open a PDF document from a website while in Safari on my iPad.

When you see a PDF link in Safari, click on it. It will preview in Safari. Then click the Share icon, and choose Open With, then select Adobe Reader.

How do I open an ABAP program from SAP in Eclipse?

Similar Messages

Maybe you are looking for