How do I pass Settings on my SAPPLM User System Preferences on multiple com

Hello All,
I have put the DLL's for Solid Edge/Solid Work interface under my computer C drive and then registered them. Then I went to Solid Edge and Solid Works went to User System Preferences/ Options to make required settings on the SAP-PLM side (example setting for registering documents, creating characteristics, document load, document save...).
I have to install the interface on multiple computers now in network, with the same settings which I did on User System Preferences/ Options. Do I have to manually go to each computer to do these settings, or the process can be automated. Does my SAP-PLM User System preferences/Options also gets saved in Registery in HUSER SoftwareGedas. Can we mirror these registeries to multiple computers.
Kindly advice.
Thanks,
Sachin

Hi Sachin
Goto Link Log
and press SAVE button in right bottom corner
choose REG file option and export the entries
go to any other PC and run the reg file
i Hope this answers your question.
Niranjan
Award if Useful

Similar Messages

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

Hi jenette,
If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
(Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
Regards,
- Brenden

For my macbook pro how do I get icloud, i have mobileme in system preferences, which is an expired trial?

for my macbook pro how do I get icloud, i have mobileme in 'system preferences', which is an expired trial? The Macbook Pro is early 2008?

richsitter wrote:
Are these osx's available for my machine? Can I buy them.
Yes.
richsitter wrote:
I don't know why I don't have one of them since I get any updates available?
Software updates don't upgrade your current operating system to a new one, you have to purchase a newer operting system if you want one.
If you want iCloud, first you have to upgrade to Snow Leopard 10.6.6 (10.6.8 preferred), then you can download Lion from the app store.
Snow Leopard requirements: $29 USD from Apple : http://store.apple.com/us/product/MC573Z/A
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Lion general requirements: $29 USD app store.
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space

HOW CAN I GET LINE IN ON SOUD IN SYSTEM PREFERENCE I NEED TO CONNECT MY GUITAR.

HOW CAN I GET LINE IN ON SOUD IN SYSTEM PREFERENCE I NEED TO CONNECT MY GUITAR.

Please do Not type in ALL CAPITALS. It is considered shouting in online communications. Now, in System Preferences, click on "Sound", and in that window click on the "Input" tab shown below. Then in the list below that click on "Line In." That will activate the Audio Line-In Port.

Bought a screensaver.   It's installed. Don't know how to get it to list of screensavers in system preferences.

Bought a screensaver. Installed it.   Don't know how to add it to other screensavers in
my system preferences.   Please help.   Thanks.

It also needs to be 64 bit. If it's in the already in the correct folder and still doesn't show up, then it's 32 bit and of no use in Mountain Lion.

How can I pass dynamic value as a user input parameter in discoverer?

Hi,
I have a requirement for a discoverer report like this: The report will display only details for Suppliers that have expired (or soon to be) Insurance details. That is the Expiration Date is less than or equal to the day the report is being run plus any days specified in the Number of Days in the Future Parameter.
The sample code as:
SELECT s.segment1 vendor_number
,s.vendor_name
,flv1.meaning classification
,pca.certificate_number
,pca.certifying_agency
,pca.expiration_date
,flv2.meaning status
FROM ap_suppliers s
,pos_bus_class_attr pca
,fnd_lookup_values flv1
,fnd_lookup_values flv2
WHERE pca.vendor_id = s.vendor_id
AND flv1.lookup_code = pca.lookup_code
AND flv1.lookup_type = pca.lookup_type
AND flv2.lookup_code = pca.class_status
AND flv2.lookup_type = 'POS_BUS_CLASS_STATUSES'
AND pca.expiration_date <= trunc(sysdate) + <No. of Days in the Future>
order by pca.expiration_date asc
Now the parameter is Number of Days in the Future (Enter the number days in the future to extract the data. This will default to 0).
Is it possible in discoverer to do so as in query i do that like a condition as pca.expiration_date <= trunc(sysdate) + <No. of Days in the Future>.
How can I pass <No. of Days in the Future> as a user input parameter in discoverer?
Please help.

Hi,
All you need to do is to create the condition in the discoverer instead of in the query.
Create a custom folder containing the following sq (note that i removed the condition)l:
SELECT s.segment1 vendor_number
,s.vendor_name
,flv1.meaning classification
,pca.certificate_number
,pca.certifying_agency
,pca.expiration_date
,flv2.meaning status
FROM ap_suppliers s
,pos_bus_class_attr pca
,fnd_lookup_values flv1
,fnd_lookup_values flv2
WHERE pca.vendor_id = s.vendor_id
AND flv1.lookup_code = pca.lookup_code
AND flv1.lookup_type = pca.lookup_type
AND flv2.lookup_code = pca.class_status
AND flv2.lookup_type = 'POS_BUS_CLASS_STATUSES'
Then create a discoverer report using this folder using all fields.
Create a new calculation as (use this exact syntax):
Sysdate + :No_of_Days_in_the_Future
Create a new condition:
pca.expiration_date <= <your calculation>
To complete it add a sort as you did in the SQL.
That's it.
Tamir

How to Change proxy settings/homepage for all users in my system at a time?

Need single configuration file for all users

You can set up a system cache for sharing jars: See here: http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/enterprise_config.03.06.html

How to get acrobat reader exe path on user system at runtime

aoa!
i want to open oracle reports in acrobat reader. for this purpose, i need acrobat reader exe file path of client. plz help to get that path in oracle reports.
Tools used:
Oracle Reports version 6
Database: 10 g
OS: Windows XP SP2
Regards
M. Asim Hameed

<userSettings>
<Client.Properties.Settings>
<setting name="ParamValue" serializeAs="String">
<value>OFF</value>
</setting>
</Client.Properties.Settings>
</userSettings>
If i modify the value during runtime from "OFF" to "ON" by opening the
Client.exe.config, the application still access the old value. But if i close the application and open again then it reads the updated value.
Is there someway to make the exe read the updated user settings at runtime .
Regards Nithin Joseph
Hello,
I am afraid that it is impossible because the application just read that value just one time when loading the application, and the modification will not affect the value any more.
Instead, you could place a xml file, and load the value when you want to do any action with the event handler.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to remove a third party item added to System Preferences

I downloaded and installed a third party program which placed and icon for it on System Preferences. I would like to remove the program from my MBPro and remove the icon for it from System Preferences.
I would appreciate your help and suggestions to do it.
Thank you for your help.
Vernon Snider

Yes, Yes, Yes. I know that Launchpad is part of Mac OS X. It is my error in describing by problem which is now resolved!:
I installed a program called "Launchpad-Control" to more easily arrange and/or delete icons/apps. In doing so, the installation placed an icon in System Preferences under "Other" which replicated the Launchpad icon of Mac OS X. That icon then loaded its program "Launchpad - Control" which is what I wanted removed. I used MacGunt's reply and removed the icon for "Launchpad - Control" and it also moved Launchpad - Control to trash. After restarting my MBPro, everything was/is back to normal!
Thanks to all who replied and my apologgy for taking your time and trouble.
Vernon Snider

How to change screen settings

Hi
I have a small issue that in ABAP editor, screen is displaying like script editor and allowing me to delete the lines one by one ratherthan deleting all the lines at the same time.could u plz tel me,how to change the settings to allow the user for multiple lines selection?
I m using the version 4.5b.
Thanks & Regards
Ravindra

Hi,
refer u may get an idea.
https://forums.sdn.sap.com/click.jspa?searchID=4333019&messageID=3617437
Regards

How do I pass Solid Edge- SAP configs on multiple computers

Hello All,
How do I pass the 'User/System preferences -configs I did on Solid Edge side' on multiple computers on which I am installing the SE-SAP interface. Do I have to go to each machine, open the user/system preferences and then check the boxes, which I did while prototyping.
How can this process be automated.
Thanks,
Sachin

Hi Sachin
Goto Link Log
and press SAVE button in right bottom corner
choose REG file option and export the entries
go to any other PC and run the reg file
i Hope this answers your question.
Niranjan
Award if Useful

How to delete su-elements in "System Preferences/Others"

I'm trying to delete a doubled element (done by mistake) inside an application located in "Other" within "System Preferences"
More precisely:
- I've "USB overdrive" app control on this location: "Other"
- By error, whoever it is, in "Status" window, there are two "USB Receiver" lines
How can I delete one of those?

In System Preferences, right-click on one of them and select Remove.
I'm not sure how that will affect the other. If two status menus are still there, cmd+drag one off the status menu area.

HT201250 how can i pass information from one mac to another mac by using the time capsule

how can i pass information from one mac to another mac by using the time capsule

If you want to transfer files, settings, etc., you must open Migration Assistant (Applications > Utilities) in the Mac that you want to transfer the files and follow the instructions

How to Restore Factory Settings on a Mac?

How to Restore Factory Settings on a Mac OS X 10.6.8?
I have been told you can do this without the Installation CD. I also do not remember the installation CD when i got the laptop. If it's possible then please someone let me know! if not then how can i get a new CD to do this?
my computer keeps freezing on me at random times, and i have tried taking the laptop to my college tech support and also Best Buy and they said they can't do anything and that i need to try resetting the mac.

You may not remember the installer disks but they came in the box. Your profile shows you are running 10.6.6 Snow Leopard. To restore back to factory settings you need those disks. That said to go that route may be unnecessry. Stay away from Best Buy tech people. They know nothing. Without the disks you do a repair disk to see if that helps:
Start up your computer in single-user mode to reach the command line.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
At the command-line prompt type:
/sbin/fsck -fy
Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
** The volume (name_of_volume) appears to be OKIf fsck found issues and has altered, repaired, or fixed anything, it will display this message:
***** FILE SYSTEM WAS MODIFIED *****
Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
Your computer should start up normally and allow you to log in.

How to provide security settings for the adobe form using livecycleDesigner

Hello,
I am very new to form designing,
can any one please tell me how to provide security settings for the adobe forms at client side?
Regards,
Menaka

Hi,
that is a good topic for the ADFS forum.
ADFS forum - http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=Geneva
But you could pass the user-agent as incoming claim type Client User agent. User-agents can be manipulated, so if that is an issue you can look into Device Registration and the Device OS type from there. That is also a incoming claim but requires DRS and
DRS is not available for all plattforms.
Hth,
Lutz

How do I pass Settings on my SAPPLM User System Preferences on multiple com

Similar Messages

Maybe you are looking for