How do I place one order with 10 different cards?

how do I place one order for 10 different cards?

You don't. Except for prints, all items on a single order must be the exact same item.
(63001)

Similar Messages

Place one order with Products from different sales orgs

Hello,
We are in CRM 7.0 EHP2 connected to ECC 6.0. We have Internet
sales/Webchannel Application.
We are rolling out Internet sales for a new country but they want the option to
place one single order with products from different sales
organizations.
Currently Customers send fax/email to customer
representative(CR) with list of products. The CR identifies and places
multiple orders if products belong to different sales orgs.
Currently customers don't have idea about sales orgs and they don't
have a clue which product belongs to which sales orgs. So, for them to
use Internet sales, we have to provide them an option to place one
order with products from different sales orgs.
I understand SAP doesn't support this. But, is there any way we can achieve this through some custom/out of the box solutions?
Thanks,
Ravi

Hi Ravi,
Please have a below help link, it may help you to explain the role of Distribution Channel and if it fits to your requirement.
Organizational Data Determination in CRM E-Commerce - E-Commerce - SAP Library
Thanks,
Hamendra

How to generate SNP planned order with different category

Our SNP system receives Forecast and Salse Order from DP system.
and we'd like to generate SNP planned order with different category..for example, 'AI' for Forecast Demand and 'AL' for Sales Order..
currently, If we run CTM, system generate SNP planned order with the
same category 'AI'..
another system(APS) in Our company receives planned order from SNP
and they want to receive planned order for forecast and planned order for sales order seperately..

It is not directly achievable however can be done through BADIs and two CTM profile. I am assuming that sales orders are planned ahead of Forecast demands. So have two CTM profiles - one for Sales Orders (regenerative mode) and the other for Forecast Demands (net change mode). You may have to invoke two BADIs in the first run for Sales Orders - one that changes master data by putting a temperory Forecast Horizon in SNP2 tab (BADI /sapapo/ctm_matloc). The other BADI (BADI /sapapo/ctm_orders) changes the ATP category just before saving. in the second run though you just need to run the latter BADI by saving it in the ATP category required. BADIs can be invoked based on CTM profiles used.

I would like to order prints of my albumns. How can I make one order with all the pictures II want

I have an older version of Mac and iPhoto on my 3 year old desk top. I simply want to place an order for specific pictures within multiple albumns. all I seem to find is a way to order each picture indiviually. Am I missing something? thanks

Make an album of the photos you want to order. Photos can be in multiple albums.
Regards
TD

How to Config PR One Order Type, Different Plant, Different Number in ME51N

For Example:PR order Type is NB,may have plant 1000 or 1100,If PR plant is 1000,then current PR number is :u201948XXXu2019,IF PR plant is 1100,then PR number is :u201951XXXXu2019
How to Config it or which user-exits(BADI) can control it
My issue is not config different order type to solved this case.

Hi,
Unfortunately, this is not what SAP was designed. The reason was that plant location is defined at item level while the PR number range is defined at the header level. How would you like your PR document to be numbered in case PR is created for both plant 1000 and 1100?
Cheers,
HT

HT1040 Is there a way to place an order with more than one item at a time? For example I am going to make a few books and have them all shipped to me. Do I have to order and pay shipping for each one individually?

Is there a way to place an order with more than one item at a time? for example I am making a few books and having them all shipped to me. Do I have to order each one separately and pay shipping each time?

You have to order each book separately, if the books are different. Only multiple copies of the same book can be ordered in the same order, see here
Regards
Léonie

HT1420 how can i deauthorize ONE computer with a DIFFERENT COMPUTER

how can i deauthorize ONE computer with a DIFFERENT COMPUTER?

You can't without being at that computer, you can only deauthorize all.

How do I order multiple different cards from iPhoto in the same order?

I would like to create and order numerous different cards in iPhoto. How can I put the different cards in one order instead of each different card being a separate order?

don't they read these forums? What is the point of the forum if they don't listen to our voices. Guess this is a load of **** too then! Eesh, should have stuck to PC! At least you know Microsoft are a bunch of robbing ****** who don't care... Apple make a show of caring but they clearly don't
I have had a long chat on the phone with a lovely chap in Ireland who works for Apple 'Executive' Relations - not sure if that is a joke too mind you!
Take a chill pill!
E

Sales order with different Distribution channels

Hi experts,
how can i create a sales order with different distribution channels.
I mean item level 10 = one distribution channel.
Item level 20 = another distribution channel.
also in Item level 30 also.... is it posible .?? how can i create ??
because we have the material in different distribution channel in differen plant with different price ..
Thanksin Advance,
Anthyodaya.

Hi Anthyodaya,
As already answered by others, the distribution channel is only on header level(VBAK), so it is not possble to have different distribution channels in one sales order.
Could you please consider using different division?
Item division could be different than header.
Go->item->Sales B->Division
Hope it helps.
Best regards,
Smile

How do I batch resize images with different aspect ratios?

How do I batch resize images with different aspect ratios?

poa66 wrote:
Landscape: I want result to be 1960 x 1103 px and 72 ppi whether the original is 300 ppi or 220 ppi and wether it is 2Mb or 10 Mb. Cropped centered top and bottom.
There will be a set of Landscapes that that have a narrower aspect ratio the 1960:1103 that would also need the top and bottom cropped like all Portraits would could be. You need to realize that center cropping Landscape image that have aspect ratios near 1960:1103 will usually produce acceptable compositions. However Cropping wide panoramas and portraits will only produce acceptable landscape 1960:1103 composition occasionally.
Here you will see what happens when image have aspect ratio the do not fit the desired aspect ratio. Where Landscape are forced to portrait and portrait forced to Landscape. Here are two Collage I populated with a mixture of image with different aspect ratios. One collage has all 3:2 Landscape places and the other 2:3 Portrait places.
I create a 1 image 1960x1103 collage 72dpi and create those too. Note the landscape boy foot is cropped off 3:2 is narrow compared to 1960:1103

Single invoice for multiple orders with different divisions

Dear All,
while I am trying to do single invoice for muliple orders with different divisons invoice is gettting splitted..In copy control vbrk routine I tried with 003 and 007 etc..but result is same..what configuration need to be done for getting the single invoice
Thanks In advance
Regards
CNRNAIR

Hello
single invoice for multiple orders with "different divisions" invoice is getting split
FYI - Different Division means different Sales Area.
So, sales doc (whether sales order, Delivery & Billing) is applicable to EXACTLY one sales area.
Thus, combining docs with different sales area is practically impossible.
Provided, you are using common division.
Hope this assist you,
Thanks & REgards
JP

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

How to create a Sales order with ref to Contract using Function Module

How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?

We have a unique situation where we like change the sold-to customer of the sales order
once order has been created. These orders have been created using either by function module
BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
These two processes work abosolutely fine except someone might have change the sold-to
customer of the ship-to customer of the original sales order. If this the case then the new
sales order will be created with the old sold-to and with not the new sold-to.
We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
the returned parameteres of the BAPIs and they are all successful but sold-to remains the
same old one.
Any help would be much more appreciated.

How can I combine one font with many styles to show up as one font

How can I combine one font with many styles to show up as one font? I have quite a few fonts, that instead of showing up as a single font with different font styles (bold, bolditalic, semibold, light....) each style shows up in the fonts dropdown menu as a separate font. Any way I can fix this?
Another font question, is there any way to group my fonts in the dropdown menu according to different categories such as 'favorite san serif fonts', or 'script fonts'?

So your saying if it wasn't set up that way be the font creator there is nothing I can do. That's a shame.
Most of the fonts that do this were free fonts, such as Walkway.
But I do have some fonts (hebrew fonts) that I purchased that do the same thing.

Okay can you have more than one account on one computer with different e-mails

Okay can you have more than one account on one computer with different e-mails

Yes for iTunes....started a new account and when I try to sign in to the store it gives me a message that this id hasn't been used and would you like to review at which time then it tells me your request cannot be completed and to check date on computer and the cookies well the date is correct and not sure what or how to alter the cookies..I turned firewall off and tried that but still no luck...also deleted temp cookies and still having problems..I have been trying to fix this for days and just about to give up any ideas

How do I place one order with 10 different cards?

Similar Messages

Maybe you are looking for