How do I play an AVI file on LabView 6.1 for windows 2000?

I have tried inputting the command C:\Windows\mplayer.exe /play /close and the program runs but the video does not play on WMP.

Hi,
here's how you can do it programatically - it's done by embedding WMP into the .vi's front panel.
Hope that helps
S.
// it takes almost no time to rate an answer
Attachments:
media_player.vi ‏52 KB

Similar Messages

  • Charting data from text file in LabVIEW 5.1 for Windows

    I am having some difficulties trying to figure out how to plot a chart with
    data from a file. I would like to be able to read data from a text file
    into a chart using LabVIEW 5.1 for Windows. I have looked in the help
    within the program and online. I have also looked in the user manual and
    the book "LabVIEW for Everyone". Could you please give me specific
    instructions on how I would construct the program to be able to do this.
    Thank you.

    Hi Ellie,
    It depends on how data is stored in that txt file. Usually you load the data into an array either using or , the array if necessary and send it to the graph indicator in required form. If you want a more detailed answer, send me a sample data file ([email protected]).

  • How do i play an .AVI file?

    I have downloaded an .AVI file - how do I get this to play on the iPhone?
    Thanks

    Hi - i managed to get it imported into iTunes into the movies bit. I have this checked to sync - but when I do the sync, the file does not come across to the iPhone - it does play in iTunes
    Any ideas please?

  • HT204382 how can i play an AVI movie file on my mac????????

    how can i play an AVI movie file on my macbook??????

    Or download and install the free MPlayerX from the App Store.

  • How can the Windows Media Player 12 be made to play WVC210 .avi files?

    I just built a new computer and it won't play the motion captured videos of the WVC210. It has Windows 7 Home Premium as the operating system. My machines running XP play the WVC210 files GREAT. Is there a codec I can add to the WMP12 so that it will play the .avi files. I have 3 cameras around the property, 2 WVC210 and 1 WVC200. 1 camera has the audio turned off so switching to MP4 (no audio) made that work OK. But the camera in the office I need to have audio and would rather stick to WMP over something like VLC. VLC plays the files fine but I much prefer WMP. I'm hopeing to find out how to have Windows Media Player 12 play the .AVI files from the WVC210 cameras. Any Help??

    There appears to be issues with codecs on WMP 12 and Windows 7
    AND\OR your WMP is missing the necessary codecs.
    Google the Net and you should find different things to try
    for the WMP 12.
    Troubleshoot problems in Windows Media Player
    http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-in-Windows-Media-Player
    It looks like additional codecs may needed to download with WMP12 and windows 7
    http://www.tech-exclusive.com/2009/01/22/download-windows-7-codec-pack-for-windows-media-player-12/
    Media Feature Pack for Windows 7 N and Windows 7 KN (KB968211)
    http://www.microsoft.com/downloads/details.aspx?FamilyID=31017ed3-166a-4c75-b90c-a6cef9b414c4&displaylang=en
    Information about the Multimedia file types that Windows Media Player supports
    http://support.microsoft.com/kb/316992
    Another possible solution:
    K-Lite Codec Pack 5.9.0 Full, Standard and Basic
    http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
    I hope this helps let us know how it goes!
    T.

  • My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

    My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

    Hmm . . . comes with a Utility MPEG2 Component ML app with no explanation of what it's for?
    The utility app is an "assistant PKG installer." It allows Lion and Mountain Lion users to install the older QT MPEG-2 Playback Component installer PKG file which is not allowed to run on its own under Lion or Mountain Lion since these operating systems already have a QT X only MPEG-2 component embedded in the QT embedded structure. Without this utility you would have to either copy the component from an older system to your Lion or Mountain Lion system, use Pacifist for installation, or manually open the PKG contents and transfer the component to the appropriate component folder.
    As to your "discussion" regarding the playback of AVI file types, there are really only two strategies here:
    1) You can add component support so that QT can play the files natively or
    2) You can convert the file contents to compression formats that are natively compatible with the unmodified QT component configuration.
    Each user should decide for his or her own self which approach best suits their needs for a particular source file. In most cases, conforming the system's codec component configuration to play the source file directly results in higher video quality since no transcoding takes place but this strategy will not work if a codec which is required is not available for the user's operating system. On the other hand, converter utilities tend to support more built-in codecs and are easier to use since the user does not have to concern him or herself with the nature of the particular source compression formats but at the risk of some potential loss in visual quality. As to what converter to use, once again this is a matter of personal choice. In the case of commercial converters like iSkysoft, the codecs are built in while MPEG Streamclip accesses the host operating system's QT codec component configuration. I personally prefer the free HandBrake app for AVI, MKV, TS, MTS, and M2TS conversions since it has an exceptionally full-featured X.264 GUI with some user options that 97% of users are likely to never use.

  • JMF: How to play an  avi file NOT in a Frame...is this possible?

    -----Primary Task------
    Using JMF, I want to play an avi video file NOT in a Frame
    ---------Why?----------
    I want to play this avi file in a "non-decoration" container (ie. no Windows GUI, eg. Window/JWindow, Panel/JPanel)
    -------Problem---------
    The MediaPlayer method in JMF 2.2.1e requires a Frame container, according to JMFUtil.java (eg. mediaplayer = jmapps.util.JMFUtils.createMediaPlayer)
    ------Questions--------
    1. Is there any way to change the method of JMFUtil.java to enable video files to play NOT in a Frame, like a Window or Panel?
    2. If not, do you know of any "tricks" to get rid of the Frame decorations?
    3. If not, any other solutions?

    sigh... first read the API, then ask.
    Frame.setUndecorated(boolean) might help. http://java.sun.com/j2se/1.4.1/docs/api/java/awt/Frame.html#setUndecorated(boolean)

  • Premiere pro Encoded file having m4v & .wav & m4v.xmpse files how can i play this video file?

    Hello Guys,
    I am a beginner in Premiere ,just started learning.Created a project and wanted the finished project file as a bluray format,after 14 hours  adobe premiere pro(not encore) created all the above three files,what to do next? how can i play the video file?
    Kind advise pls

    Dear Mr,Hunt,
    You made my day....i felt its more than special a christmas day,thank's a Trillion..downloaded the MKV MERGE GUI ,within ten minutes job done!!!!!!!!!
    All my 16 hour rendering job is saved.End of the day i learned something new toooo.
    I would like to ask you a question which is not connected to this topic,i asked this question before in windows 7 forum but till date no body solved!!
    I am having few avi video files which having (avi.avi) extension i couldn't figure out how its occured(they all video files captured from samsung galaxy note,and appeared noraml avi files but became avi.avi i tried removing one extension,eventhough it says having one extension when you look in to the properties of that file you can see avi.avi ,the problem is eventhough it playable in vlc sometime,when i try to import to premiere pro -it says the file is corrupted.
    any idea??

  • How do I play an AVI movie from my mac to my tv?

    OK; I got a flatscreen + Apple TV. Got a movie on my laptop which I want to watch. But I am only 10.6.8 for good reason.
    Is it a simple matter of watching it and mirroring it to the flatscreen? It looked simple, but took hours to do, well, I don't know what, but there was a thermometer so it must have been important work. Appeared to be copying it to Apple TV but I'm not sure of that.
    I got to the point of seeing a black screen with a timeline across the bottom... but the spooled portion of that timeline never really moved and so the progress indicator never moved.
    So, I gave up and put the movie on another laptop with later system. 10.8.5. It has a Mirroring popup in the displays control panel with looked much simpler. But it couldn't play an AVI file... so I downloaded the recommended plug ins... but still couldn't play it.  What else can I add?

    About Mirroring in OSX
    Supported formats on the ATV:
    Video Formats
    H.264 video up to 1080p, 30 frames per second, High or Main Profile level 4.0 or lower, Baseline profile level 3.0 or lower with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • How to increase the speed of video (avi file) using labview

    How to increase the speed of video (.avi file) using labview? I have  tried this by skiping alternate frames. also I have used  minimum time delay.Is there  any other option for which i can go?
    please suggest me........... 

    Are you using NI Vision IMAQ AVI Read Frame or anther method to read the AVI file?
    Matthew Fitzsimons
    Certified LabVIEW Architect
    LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

  • How do i play two sound file one after another

    Hi All,
    How do i play two sound file one after another using single AudioClip Component?.
    Advance in thanks
    Manivel

    AudioClip gives you very little control over what happens to the sound, it also isn't capable of playing long clips or waiting until a clip ends. It will play multiple clips over top of each other.
    To do what you want you should use the facilities of javax.sound. Here's a post with an example: http://forum.java.sun.com/thread.jspa?forumID=513&threadID=450768
    There is also a tutorial, but its example fails for long clips.

  • How do I play an audio file as a soundtrack for entire keynot

    How do I play an audio file as a soundtrack for entire keynote?

    https://developer.apple.com/mac/library/samplecode/PlayFile/Introduction/Intro.h tml
    Docs are your friend....mac os has it's own just like iPhone.

  • How import AVI files to my I Mac for editing in Final Cut?

    How import AVI files to my I Mac for editing in Final Cut?

    You first convert them to ProRes with Compressor or MPEG STREAMCLIP, then import the ProRes files into FCP.  FCP doesn't work with the AVI container...footage must be Quicktime, and must be in a codec FCP works with.

  • How can I play MPEG-4 files in Premier Elements?  It plays in iTunes but I only see video in Element

    how can I play MPEG-4 files in Premier Elements?  It plays in iTunes but I only see video in Elements

    LGSh
    Lots of questions, lots of answers needed as mentioned by Hunt. But please include what version of Premiere Elements that you are using when you reply.
    How are you importing these file into your Premiere Elements project?
    After you drag your file to the Timeline, do you see both an video and audio component (on Video 1/Audio 1) or is there nothing on the Audio 1 track? If you can see a wave form or file on Audio 1, have you checked all the program's volume settings including Edit Menu/Preferences/Audio Hardware and the ASIO settings?
    More later.
    Please do not hesitate to ask if you need clarification on anything written.
    Thank you.
    ATR

  • HT3775 i try to play an AVI file and it says the codes isnt supported?

    I'm trying to play an avi file. Quicktime won't play it because the required codec isnt available but when I click on 'tell me more' button it does list avi as a file format that is should play. First the file would play in VLC but then I installed some updates and now it doesnt play it anymore? What's going on?

    AVI isn't a audio format, but merely a container or wrapper around the codec. So, just because it is an AVI doesn't mean it is the same as every other AVI.
    VLC can usually play just about everything. Were the updates to VLC or to the OS?

Maybe you are looking for

  • Ipod not recognized by pc or itunes

    hi, i've has my trusty old ipod video for about 4 years now. and havent had any major problems with it, until friday. i plug it into my computer and a bubble pops up saying that usb device is not recognized. it happens when i try differents usb ports

  • SO created is Open or Close Sales Order

    <b>Hi I hav ot write a report for SD , In this for sales order I hav to check that - Is this Sales order is Open or Close order , Select-optoins are SALES ORDER , DATE , PLANT , St location . if it is a close sales order , Then this report should pas

  • Table& field names for position name(employee) in HR-ABAP

    Hi, wht r the table and fields for the following . exp: pa0001-plans = employee position number. employee position name = ? employee grade level = ? employee sub grade indicator = ?

  • Invoke webservice to retieve data

    Hi All, We have a requirement to download data from SAP system to our Oracle DB. Issue is we will not be able to connect to SAP DB. They weill provide a webservice and we should use that by passing parameters. My query is, how can we do that in Oracl

  • Listener drops suddenly or refuses connection

    I am having some strange problems and need some help ASAP. I have an Oracle 7.3.4 database running on AIX 4.3. Now the listener sometimes suddenly stops for no apparent reason or refuses connection requests to the database leading to ORA-12203 TNS: u