How do I prevent the "Save as" window that started popping up yesterday and just print articles without saving?

In years of printing articles I could always print without "saving as" first. Is there some setting I need to change or an add-on? I have firefox 3.6.13, Windows XP, HP PSC 2355

{Ctrl + P} or File > Print
Is your printer selected at the top in Printer - Name??
Is '''Print to File''' selected on the right, a little further down??

Similar Messages

I recently had my account expire, and need to utilize the trial to finish a project. Even though my account says 'free trial' the applications will not open. How do I get the APP to recognize that I'm in trial and not expired?

I recently had my account expire, and need to utilize the trial to finish a project. Even though my account says 'free trial' the applications will not open. How do I get the APP to recognize that I'm in trial and not expired?

I had a year long CC membership that expired at the beginning of the October.
After realizing that, I attempted to start a free trial of photoshop to work on a project. My Adobe account states that i'm on a trial, but my (Mac) dashboard CC app won't allow me to start the program. I have reinstalled both Creative Cloud and Photoshop CC but still get this message.

How can i prevent the error "mailbox locked by a pop 3 session"

how do i prevent the repeated error " mailbox locked by a pop 3 session!"

lol i think he was talking about formating your messages on the forum.
look at an example that i just created hope it helps. If not then read up on the GUI chapter of your java book.
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JTextField;
import java.awt.BorderLayout;
public class ButtonTest{
    public static void main(String args []){
        JFrame frame = new JFrame();
        JPanel panel = new JPanel();
        final JTextField textA = new JTextField(10);
        final JTextField textB = new JTextField(10);
        JButton button = new JButton("Perform Action");
        class Listener implements ActionListener{
            public void actionPerformed(ActionEvent e){
                if(!textA.getText().equals("") && !textB.getText().equals("")){
                    System.out.println(textA.getText()+" "+textB.getText());
       ActionListener listener = new Listener();
        button.addActionListener(listener);
        panel.add(textA);
        panel.add(textB);
        panel.add(button);
        frame.getContentPane().add(panel,BorderLayout.SOUTH);
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.pack();
        frame.show();
}

How can I stop the "plug in " stuff that keeps popping up when I open Firefox...it is annoying!!

The advertisement is anoying ...how do I make it stop

Do the
Pref = plugins.update.notifyUser if it shows as True, double-click that pref to toggle it to False
thing that is listed in this forum. You get to it via URL about:config
- TechOwl -

How can I prevent the open/save file confirmation window popup ? Mine is currently set for "always do this action" but I still get the popup.

Whenever I "export" a QIF file from my bank I get a File Action confirmation window popup. I have the correct application selected and I have it selected to "open" and "always do this action" but the popup always pops.
I have checked the applications tab and the correct application is selected.
How can I prevent the confirmation popup window please ?

Cheers for the reply.
I have deleted the rdf file but no difference. I still get the opening file box popup.
From the resetting download actions link. Both lines in the about:config are missing.
I have also tried switching the download option for the qif file to use a csr file but that also opens the confirmation box.
I pulled this from the rdf file
<RDF:Description RDF:about="urn:mimetype:handler:text/x-qif"
NC:alwaysAsk="false"
NC:saveToDisk="false"
NC:useSystemDefault="false"
NC:handleInternal="false">
<NC:externalApplication RDF:resource="urn:mimetype:externalApplication:text/x-qif"/>
<NC:possibleApplication RDF:resource="urn:handler:local:C:\Program Files\Microsoft Money\System\msmoney.exe"/>
</RDF:Description>
<RDF:Description RDF:about="urn:scheme:webcal"
NC:value="webcal">
<NC:handlerProp RDF:resource="urn:scheme:handler:webcal"/>
</RDF:Description>
<RDF:Description RDF:about="urn:mimetype:externalApplication:text/x-qif"
NC:path="C:\Program Files\Microsoft Money\System\msmoney.exe"
NC:prettyName="msmoney.exe" />
Not sure if that helps.
Thanks again for the reply

Safari save as window opens larger than screen size and I can't get to the

In safari, I choose File -> Save As. The save dialogue window is taller than my screen and the buttons get buried under my bottom toolbar. I can't reach the save buttons and I can't seem to reach the right hand corner to manual resize it. I've tried clicking the green button in the top left hand corner but it doesn't change a thing.
thanks to anyone that can clear this up.
s

I tried clicking the blue export button so its pointing down and the save dialogue window does shrink. However, the adjustable dashes that normally appear in the bottom right hand corner, are not there. The only appear when the export button is pointing up. Too bad I can't reach it.
Your 2nd idea worked! My display was already at max resolution BUT I had a 2nd monitor and dragged the save box over and the smaller display was enough to reach that bottom corner.
yeah!

How do you prevent the computer from shutting down when in sleep mode?

How do you prevent the computer from shutting down when in sleep mode and plugged in?

Thanks tjk.
Those are great suggestions and got me looking in places I had not considered before. Unfortunately, the problem remains. The System Preferences did not have the shut down option activated and there are no parental controls active on the computer.
Any other suggestions are welcome.
Brian

How do I paste a copied filename into the save as window?

I am used to copying filenames into the save as window ... it is more accurate and mroe efficient than typing them. When I upgraded to CS1 and CS3, I can not do this, either on Snow Leopard or on Win7. How do I regain the ability to do this?

Copy and paste works just fine in the save dialog.
And the save dialog is provided by the OS, so if you have any third party utilities that modify the behavior of the save dialog - those could cause problems.
Also, CS1 and CS3 are both quite a few years out of date.
Are you sure you have the right version numbers?

When used as an Activex control in windows How can I prevent the "Q" logo from appearing between streaming videos?

When used as an Activex control in windows How can I prevent the "Q" logo from appearing between streaming videos?

Hello Cgifford,
Welcome to National Instruments Forums.
To output your signal to the PFI lines,
you can use external connectios between OUT0 and PFI lines. You can also use
the backplane to do so by routing into the same RTSI line.
1)
On the SCOPE and FGEN, the name of the
terminals are actually “PXI Trigger Line x/RTSIx” but on the 6602 you might
need to route the signal using the property:
You can also use the DAQmx route signal which perform the same opperation.
2)
This will depend on the frequency of
your pulse train. If this is lower than about 10 ms, then you can probably
place this on a loop and start and stop the acquisition every time. If the
frequency is higher than this, you will have to use:
- Scripting on the FGEN side (read more)
- MultiRecord Fetch (more information in the scope help file
section “Acquisition Functions Reading versus Fetching”).
3)
The short answer is yes. The longer one
might depend on how tight you need the synchronization to be (us, ns, ps). For
very tight synchronization, you should look into here.
Message Edited by Yardov on 06-18-2007 03:14 PM
Gerardo O.
RF Systems Engineering
National Instruments
Attachments:
property.JPG ‏7 KB

I'm using "window.open()" to show one Calendar in a popup window. I can see that the popup is re-sizable. How can I prevent the user from re-sizing the popup?

I'm using "window.open()" to show one Calendar in a popup window. I can see that the popup is re-sizable. How can I prevent the user from re-sizing the popup? I have tried "resizable=yes|no|1|0" and that seems to be not working.

You can't prevent users from resizing a pop-up.
*https://developer.mozilla.org/en-US/docs/Web/API/window.open

How do I prevent the Window Office applications from launching when my iMAC boots or recovers from sleep? I've tried System Preferences however the Office programs are not listed?

How do I prevent the Window Office applications from launching when my iMAC boots or recovers from sleep? I've tried System Preferences however the Office programs are not listed?

lunagirl wrote:
The first 3 apps listed are not installed because I have not run the activation assistant for the Office trial that came with the T61. Add/Remove programs has only these pre-installed apps:
Microsoft Office 2003 Web Components
Microsoft Office 2007 Primary Interop Assemblies
Microsoft Office Small Business Connectivity Components
MS SQL Server 2005
MS SQL Server Native Client
MS SQL Server Setup Support Files
MS SQL Server VSS Writer
Is the activation assistant one of them?
No, AFAIK should be listed as Microsoft Office Suite Activation Assistant
Rgds,
Ahti

How do I prevent the last page I visited reopening when I launch safari?

How do I prevent the last web page I visited reopening when I launch safari?

Hello:
Go to system preferences>general and check "close windows when quitting an application."
Barry

When someone other than myself downloads an image from my web album, a dynamically generated file name replaces the original file name. How I can prevent the original file name being replaced during the downloading process?

When someone other than myself downloads an image from my web album, a dynamically generated file name replaces the original file name. How I can prevent the file name being changed during this downloading process?

Hi Glenyse,
Here are my steps.
1. I upload multiple image (jpg) files onto my photo album.
2. I select the "sharing" by email option for this album.
3. I enter the recipient's email address.
4. The recipient receives my message and clicks on the link.
5. The recipient accesses my photo album and clicks on one of the images.
6. The image opens up to its own screen.
7. The recipient selects the "download" and then save file option.
Here is the part I do not understand. For some reason, during this "download" process, the original name which I have given to the file is replaced by different name. So I was hoping that someone knows how to prevent the file name from being changed during the "download and save" process.
Much appreciated if you can help me find a solution to this problem.
Mary

How do you prevent the organizer from mixing the order of pictures when down loading off the memory card?

@How do you prevent the organizer from mixing the order of pictures when down loading off the memory card?

This sounds like you are using Photoshop Elements, and the Photoshop Elements forum would be best at answering that.
Photoshop Elements
Gene

How do I move the 'save as' dialog out of my way in Preview?

I have a stack of pdf files to rename, for which I need to read the contents. The filenames are composed from the authors, title and date which are inside the documents. The trouble is that I can't save them without the 'save as' dialog occluding the document, which I need to see in order to fish out the authors, title and date.
How can I move the 'save as' dialog off the document view?
Is there another way around this problem?
I'm using Snow Leopard's version of Preview, in case it matters.

Yes, that makes it pretty much impossible if you need to grab text from various places first and assemble it into the file name you want.
I can copy/paste text out of a PDF with the Adobe Reader into a Save As dialogue box, but then run into your same issue with Preview. I can't move back to the document to get another snippet of text.

How do I prevent the "Save as" window that started popping up yesterday and just print articles without saving?

Similar Messages

Maybe you are looking for