How do i print from indesign (CS4) landscape without losing the edges.

i'm a PC to MAC newbe. Also moved from CS2 toCS4.
can't for the life of me figure out how to print from indesign in landscape layout without losing the left 2.5 inches of print. having the same trouble with #10 envelopes.
your help would be appreciated!

Usually this problem has to do with choosing the correct size and orientation of paper, both page size and print paper size.
IOW, if you want to print to a #10 envelope, start a new document that is exactly the size of a #10 envelope. Then when you print it, choose a paper size that is exactly the size of a #10 envelope.
What size page are you printing, and what paper size are you choosing when you print it?
Ken

Similar Messages

  • New problem printing from InDesign CS4 in Lion

    After having great success with Aisolve's earlier fix on printing from InDesign CS4 after upgrading to Lion, I'm having a new problems after installing the OS X 10.7.2 upgrade last week. When I try to print from  InDesign CS4 and Illustrator CS4 to my Lanier 445c/Ricoh C4500 at my workplace I get the following error message:
    "Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem."
    This seems like a different issue this time, as I'm able to print to my home printers, an HP LasertJet 2600n and an HP Photosmart C4270. I thought it might be a printer driver problems, but I've gone to Lanier's site and they don't have any new printer drivers for Mac OS X 10.7.
    I also some research on Adobe's site, and found this message affecting CS1, 2 & 3. I tried the only fix that seemed to apply to me, which was re-naming/deleting the InDesign Deafults and InDesign SavedData files. (I have this problems even when I'm printing a text-only file without any graphics.) This fix didn't work.
    I can print to the Lanier/Ricoh from Acrobat 9, and all my non-Adobe software just fine, so my work-around to date has been exporting to PDF and printing from there. My big problem is that I need the "Print Booklet" feature in InDesign for a big job I've got coming up this week. Can't do that from Acrobat. :-(
    Any help would be greatly appreciated!

    mmsteer,
    I think I may be able to help you with this problem, which I was having with CS4 when I first upgraded to Lion, and others were having with CS3. This fix is courtesy of Aisolve on these discussion boards:
    Remove the Adobe PDF PPDs from the following folders:
    OS/Library/Printers/PPDs/contents/Resources/en.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Ja.lproj,
    OS/Library/Printers/PPDs/contents/Resources/ko.lproj,
    OS/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj,
    Be sure to go to your system Library, not your user Library.
    Also, regarding my current problem, I spoke with an Apple tech person and found that the 10.7.2 upgrade apparently is the culprit, and is incompatible with wireless printing to my Lanier printer. I CAN print connected through USB. That's a work-around for now, but I'll need to contact Lanier about upgrading their driver for OS X 10.7.2.
    Aisolve was helping me with this issue, too, and assures me that if I'm able to generate a postscript file (which I was), and able to generate a PDF by distlling it through Adobe Distiller (which I am), then I can safely assume that the problem lies with the hardware, in this case the printer driver. This lines up with what Apple told me.

  • How can I print from my ipad air without buying a new "air print" compatable printer?

    How can I print from my ipad air without buying a new "air print" compatable printer? I currently have a HP Photosmart plus B210. Can I make that work?

    Although you have posted in a Mavericks forum, implying that you have a Mac computer, your profile doesn't say that you have one. Printer Pro requires the printer to be connected to a Mac.

  • How can i add new files to my ipod from a different computer  without losing the added files on my ipod?

    how can i add new files to my ipod touch from a diferent computer without losing the added files already on my ipod?

    Email them? Use DropBox?  What type of files?

  • How do I move pictures off my phone without losing the pictures permanently?  Is there a way to keep the pictures in the cloud without them being on my device?

    How do I move pictures off my phone without losing the pictures permanently?  Is there a way to keep the pictures in the cloud without them being on my actual phone?  I'm concerned that the sync feature will remove the pictures from the cloud when they are deleted from my phone.
    Thanks for the help.

    Can I back up iPhoto to the cloud via some apple service (iCloud)
    No
    or do I need to use something else?  If so, any recommendations?
    An external hard disk:
    Most Simple Back Up:
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
    Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

  • Hi, i have new computer as my old one packed in and i have lost everything. how do i now sync my i pod without losing the music i manually put there by cd,(no longer have some of the cd's) ?

    Hi, I have had to purchase new computer as my old one packed in and i have lost my entire music library. How can I sync my I-Pod touch without losing the music on it that was put there through importing cd's as i no longer have some of the cd's but really want to keep that music?

    See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    Hopefully you take the time to back up these files regularly in the future.
    B-rock

  • Question on workflow for high end inkjet prints from InDesign CS4

    Photographs are imaged in Photoshop using Adobe 1998 as a profile. These files are linked in InDesign. My question is how should I output the files from InDesign. I've tried "High Quality Print" saving the files as a PDF then parsing those files with Photoshop as high res files. But the files lack the quality in the original photoshop files.
    My system in completely calibrated and I'm quite used to creating output for both offset printing (generally as per vendors instructions) as well us highend digital printing.
    Thanks ahead for your comments.

    You need an ICC profile that defines the destination color space. In this case the high end ink jet.
    This will be an RGB profile. You can use a factory profile corresponding to the printer model and paper (this would be part of the printer software install), or you can have a custom profile generated by reading a color target printed on the device. There are online services that can actually create the profile if you send them a print out. Follow their specific instructions if you choose to do this.
    Once you have the print device ICC, check the Color Settings in ID. Make sure the RGB policy is "Preserve Embedded". As long as this was the setting at document creation, the image Adobe RGB profiles were honored.
    To double check, look in the Links panel. Under ICC you should see Adobe RGB, not Document RGB.
    You can also right or control click on an individual image. Go to Graphics: Image Color Settings. By profile it should say Adobe RGB, not Document RGB.
    In the print dialog, Color Management, select Document radio button. Color Handling, Let InDesign Handle Colors. Printer Profile, select the Printer ICC. Do a small test print, then check the result to see if it's satisfactory.

  • Printing from InDesign CS4 on Mac Snow Leopard to HP officejet pro K5400

    I recently started using a Mac Snow Leopard with InDesign CS4; for awhile it printed fine. Then, dealing with a book mss, I had to get InDesign to convert the document to a PDF, and since that time, the Officejet Pro k5400 will only print in what appears to be the best quality, even when I tell it to print in fast draft, and even set that as a preset. Anybody had that problem? Anybody have any suggestions as to what is going on here? How can I get the printer to print in fast draft? Thanks for any help,
    Knob Man

    Hi kajuntwin,
    I understand that you are having and issue after updating your desktop. I am referring you to this post by MBJustice who is currently working with other customers on this issue.
    I hope this helps,
    Thank you.
    I worked on behalf of HP.

  • Laser printing from Indesign CS4 to Oki laser C5750

    I am printing booklets which contain mostly text with quite a few B/W photographs and colour photographs. I have iMac running OS 10.6.5 with Indesign CS4 printing to OKI C5750 laser printer. The problem is that I am using the colour toner at a very rapid rate (about 400 pages before one or more of them runs out) I am sure my personal density factor is high but I cannot find a way to set print settings to minimise the use of colour toner (other than one tick box).
    The manuals do not seem to help nor does the Oki tech support (although they are very pleasant). Is there anyone who can advise so that I do overspend my small pension?
    Peter

    Mr. Met wrote:
    There are bw and 4C images in this doc. Print to grayscale won't work.
    [edit] Huh…Didn't see my earlier reply when I checked a few moments ago. When I retyped my answer and posted it was there. Sorry for the double post.
    Hmmmm, forum seems a tad low this morning. 20 minute lag between the email and the post that now appears. I guess that explains the second comment.
    Glad the image mode check worked out. I hate to tell you how common it is to find "grayscales" that are really RGB with a filter or desaturated.

  • KM Document transport from 2004 to 2004s without losing the versions

    Hello,
    We have a problem to transport our documents from the KM in 2004 to the KM in 2004s without loosing the versions.
    We can’t use ICE because we would lose the versions.
    And we don’t want migrate the 2004 system to 2004s. We have both systems already running parallel.
    I hope some one can post an alternative way for this transport.
    Thanks in advance
    David Höller

    Hi David,
    I did not test this, but...
    If you are in FSDB mode, maybe you can copy the entire folder of the 2004 portal to the 2004s one.
    You will lose autorisations in the portal, but the versions should be there.
    If you are not using FSDB, maybe you can give a try with webdav.
    Until someone tell me that I'm wrong...
    Brad

  • How can I switch from Thunderbird to Mail without losing existing messages?

    I began using Thunderbird when I got my first iMac because I had been using it on my Windows PC.
    Now I am tired of dealng with the duelling Address Books (the OS X Address Book and the multiple Address Books within Thunderbird).
    So, I would like to stop using Thunderbird (and remove it from my iMac), but want to retain all the messages currently in the various Inboxes, Sent boxes, Archives, etc. in Thunderbird...
    Is there any easy way to do this? (I know I could save all the messages as files and - presumably - open them with Mail, but there are a lot of messages).

    Hello, how to import T-bird to Mail...
    http://hints.macworld.com/article.php?story=20050402143519725

  • How to disable history from new tab page without disabling the new tab page entirely?

    As the title states. I have read countless questions on this and none ever give a working answer. So I will try again. I think it is absolutely ridiculous that even though I delete my browsing history after every time, my browsing history still shows up on the new tab page. Which proves that Firefox is actually NOT deleting my browsing history like it says. So how do I STOP that from happening? I don't want my browsing history to show up anywhere. At all. Ever. For any reason. Is that impossible with Firefox? That would put it in first place for world's worst browser if your browsing history is permanent like mine is right now. Huge security hole much?? So how do I make it stop once and for all. But I still want the new tab page there, but ONLY with the sites I have pinned to it. Nothing else. EVER.

    First off, let's start by updating you to the latest Firefox, 32.0.3. ([[Update Firefox to the latest version]]). Firefox 20, which you are running, is suspect to MANY security issues (including one fixed just yesterday that affects the entire internet and allows websites to pretend to be any website they want to be), plus it has it's own bugs and issues in Firefox itself.
    After you've updated, let's see if we can't get this sorted out. Are you saying that when you clear your history the new tab page doesn't clear? Are you using the default new tab page or do you have any new tab page add-ons installed?

  • Hey Apple, How do you export from imovie to fce without losing quality?

    I am capturing my footage on a Panasonic hdc-tm15 full hd 1920x1080 avchd. The format recorded is not compatible with fce so i have to import to imovie first. what export settings do i need to use to ensure i dont lose quality when going from imovie to fce?

    If you shot Progressive it won't work directly, whereas Interlaed will with the suggested File>Log and Transfer method over USB.
    You will also need to select the matching Easy Setup before starting a New Project and transfering clips.
    That's usually an AVCHD 1920 x 1080i 50 or 60.
    50 for PAL, 60 for NTSC.
    Al

  • How to send mail from adobe interactive form without opening the outlook

    Hello all,
    When the end user press the submit button i want it to send the XML data without opening the outlook or other mail application.
    Is there a way to do this?
    I tried javascript codes to send mail with UI = false but it did not work.
    Thank you all in advance,
    Eran

    mailForm
    Parameters: bUI, cTo, [cCc], [cBcc], [cSubject], [cMsgBody]
    Returns: nothing
    This method exports the form data and mails the resulting FDF file as an attachment to all recipients,
    with or without user interaction depending on the value of  bUI.
    If it is set to true then the rest of the parameters are used to seed the compose new message window that is displayed to the user.
    If bUI is set to false, the cTo parameter is required and all others are optional.
    You must use a semicolon u201C;u201D to separate multiple recipients in cTo, cCc, cBcc parameters.
    The length limit for cSubject and cMsgBody is 64k bytes.
    Example:
    /* This will pop up the compose new message window */
    this.mailForm(true);
    /* This will send out the mail with the attached FDF file to fun1 @ fun . com and fun2 @ fun . com */
    this.mailForm(false, "fun1 @ fun . com; fun2 @ fun . com", "", "", "This is the subject", "This is the body of the mail.");
    Note:
    This is a Windows-only feature. In addition, the client machine must have its
    default mail program configured to be MAPI enabled in order to use this method.
    I had to change the code:
    instead of this.mailDoc :
    var myDoc = event.target;
    myDoc.mailDoc(false, "fun1 @ fun . com; fun2 @ fun . com", "", "", "This is the subject", "This is the body of the mail." );       
    But the outlook new message window still opens...
    Any Idea's?
    Eran

  • Scaling issue when printing to HP devices from InDesign CS4

    I seem to have a recurring error printing from InDesign CS4 (OS X Leopard 10.5.8) to both my HP printers (C3180 & Officejet Pro 8500). When printing at 100% size, the artwork gets scaled up slightly. For example, creating a simple 5 x 5" box ends up coming out at 5.125 x 5.125" on the printed sheet (with no scaling turned on in the print dialogue).
    I've not been able to find any support issues related to this on either HP or Adobe's site. I suspect it's s driver/postscript incompatability issue. The same artwork prints at the correct size when exporting to PDF and printing from Acrobat.
    Curious if anyone else is experiencing the same problem.

    A large percentage of problems we see related to printing seem to be with HP printers. Are you doing borderless or anything like that? What is the page size and scaling in the driver?

Maybe you are looking for