How do I print more than one copy of a photo at a time?

I am trying to add a photo to a card, but I can only print one at a time. How do I print more than one copy of a photo at a time?

Do you want to print more than one card or more than one photo on a card?
To print multiple photos on one page select the photos and print, select the printer, paper size, photo size (obviously the photos will have to be sized so the number you want will fit inclusing a small border) and click customize - in teh settings select multiple photos per page (the preview will reflect your selection) and click print - make any printer specific selections and click print to print
LN

Similar Messages

Print more than one copy of a photo

How do you print two 5x7 on a page or even print 9 wallets per page of the same picture?

Do you want to print more than one card or more than one photo on a card?
To print multiple photos on one page select the photos and print, select the printer, paper size, photo size (obviously the photos will have to be sized so the number you want will fit inclusing a small border) and click customize - in teh settings select multiple photos per page (the preview will reflect your selection) and click print - make any printer specific selections and click print to print
LN

Cannot print more than one copy from Win2000 to USB printer on a G5

Hi,
I have set up shared printing so that a Windows 2000 PC can print directly to my Canon S600 on the USB port of the G5, however, we cannot get it to print more than one copy of a document at a time, i.e. you tell Word to print five copies but only one comes out.
I tried changing the printer driver to the Canon S600 (from an installer CD), but we couldn't get it to print at all.
Then tried the HP Laserjet driver and Apple Colour Laserwriter driver. Both these work but we still only get one print out at a time.
Is it a case of going through all the printer drivers until one works, or is it a limitation of printing over a wireless network to a USB printer?
Justin

As I recall, there is a setting in Windows that determines whether it is the printer, or Windows itself, that generates the multiple copies. You need to have Windows generate each copy.

Cannot print more than one copy! Any ideas?

My wife came home with a HP 5400dn officejet pro the other night from Staples.
After setting the thing up with a successful test page, I tried a real print job. So far so good. Then I tried to use the duplex function but wait, where is the option to duplex print? There isn't one, even with a 2 page document!
Then I tried to print a two sided document manually, first one page, then the other. OK, fine, but what if you want 10 copies of one side?
No way! I hit the print command, set the number of copies, and get 1 copy. Again and again. And again. It does not matter whether I ask for 5, 10 or 40 copies. I get 1 copy.
So I called HP and after 45 minutes with a Mac using tech who is mirroring everything he tells me to do, we can't get the thing to print more than one copy.
So he tells me he will forward the issue to HP engineers who conference call with Apple engineers weekly to resolve these kinds of issues, but he thinks its is an OSX 10.4.10 issue.
So because I need a printer, we go out yesterday and buy a Brother 4040cn color laser printer (Staples again, great price, 399). Today I set it up in 10 minutes, easey peasey, and guess what? Still no multiple copies.
Does not matter how many I ask for, print quality is excellent, but it will only give me one copy.
Sounds as though it is an OSX issue, no?
But wait! I am using Open Office 2.2, could that be the problem? I don't have any microserf Office products to test from, could it be the application not the OS?

But wait! I am using Open Office 2.2, could that be the problem? I don't have any microserf Office products to test from, could it be the application not the OS?
There does seem to be a problem with OpenOffice 2.2. I just tried printing 3 copies of a document. It only printed one copy.
I looked at the CUPS error_log to see what was happening. I have CUPS debugging turned on. The parameters that OpenOffice sent to the printer show:
D [18/Aug/2007:10:25:06 -0500] StartJob: argv = "Epson1280_GP_5_usbtb","251","matt","Test Copies","1","InputSlot=Standard PageSize=Letter","/private/var/spool/cups/d00251-001"
I then sent a print job requesting 3 copies from BBEdit. The parameters that were sent to the printer show:
D [18/Aug/2007:10:35:25 -0500] StartJob: argv = "Epson1280_GP_5_usbtb","252","matt","Test Copies","3","StpQuality=Standard
The important parameter appears after the job title "Test Copies". The job from OpenOffice shows it requested one copy. The job from BBEdit shows it request 3 copies.
I don't have a solution for you, but I can confirm where the problem is. It would exonerate both the printers you tried.
Matt
Edit: Crossed out text is due to Apple's rendering engine and using left and right square brackets.
Message was edited by: Matt Broughton

Can you print more than one copy from eprint.

Does anyone know how to print more than one copy from eprint?

Hi JJSS,
Currently, the solution only offers one copy. If you need to print multiple copies, the workaround is to send the email multiple times.
I work for HP.

How do I print more than one custom-size photo on a page in PSE 10?

I recently upgraded from Photoshop Elements 6 to Photoshop Elements 10. I make greeting cards, and on PSE 6 I was able to print two custom-size (6-1/2” x 5”) cards on each 8-1/2” x 11” sheet of photo paper. The option to print more than one custom-size card on a single sheet of paper is not available in PSE 10. I want to know how I can print more than one custom-size card (or photo) on a page in PSE 10?

In Editor:
File>Print>#4 Select type of print>picture package

How do I print more than one 4X6 on a page?

How do you print more than one 4X6 on a page?

It can be done in Lightroom 2 but, as John pointed out, it requires a 'hack.' Here is how it's done:
http://lightroomkillertips.com/2009/video-multi-photo-picture-packages/

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time. This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail! Any help?

The cyan portion of the printhead may be clogged. I would suggest running the diagnostics shown here. If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp 1050 will not print more than one copy at a time

hp 1050 will not print more than one copy at a time

Hi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us.

Won't print more than one copy d 4260

won't print more than one copy d 4260

Hi lkc,
Welcome to the HP Support Forums! I see you are able to print wirelessly to your HP Photosmart 7525 to your MAC, however it only allows you to print one page at a time.
I would like you to complete the steps listed below:
Uninstall
1. From the computer desktop, double-click the Macintosh HD, and then click Applications.
2. Click the Hewlett-Packard folder.
3. Double-click the HP Uninstaller, and then click Continue.
4. Select the printer to uninstall, and then click Uninstall.
5. When prompted, type the Administrator name and Password, and then click OK.
Reset Printing System
1. Click the Apple icon, and then click System Preferences .
2. In the Hardware section, click Print & Fax. The Print & Fax dialog box opens.
3. Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
4. Click OK to confirm the reset.
5. Type the correct Name and Password.
6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected.
Repair Disk Permissions
1. On the Dock, click Applications, and then click Utilities.
2. Double-click Disk Utility.
3. Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
4. Click the Repair Disk Permissions button at the bottom of the window.
Now I would like you to restart the MAC, once it is restarted please go ahead and run the software installation. Click below and select your current Mac OS X from the drop down list, download the drivers and proceed with the on screen instructions:
HP Photosmart 7525 e-All-in-One Printer Drivers
Let me know the outcome, I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How can I print more than one slide per page from the iPad????

Im having problems printing from the iPad. I want to print more than one slide in one peace of paper. 3, 6, 9 ...
Can any one help?

Start the print process and click on the Custom layout. At the bottom you can set the size of the image desired and see how many photos can be placed on the page size selected.
OT

Printing BUT unable to print more than one copy

When printing, I'm unable to print more than one copy

Still need help, I want more than one print of one picture in a set.

Unable to print more than one copy at a time to any printer

I've had this issue for a while but have just been dealing with it but I ran into an issue where I needed 50 copes of a document and I had to print the document 50 times......
First, the issue; Through any of the applications I've tried (Preview, Adobe, Pages, numbers) to print multiple copies, I can't get more than one to print at a time. Even if I set the number of copies to 2, 5, 10 or whatever, only one copy prints.
I've tried multiple printers, One connected via USB, one shared through an OS X Leopard server and the other through an IP port all with the same result.
All of the printers are various HPs but I had this issue with a Lexmark one in the past. I am running 10.5.5 and am really hoping someone has a solution to this.
Thanks,

anyone...?

Printer won't print more than one copy

Ever since I got my new computer, I have not been able to print more than 1 document at a time from Microsoft Works. When I need to print over 500 hundred copies every few months, this is a big problem for me. Any other programs will print as many as I need except Works. My computer has Windows 7 and my printer is an HP Deskjet F4480 series. How can I get this fixed?

I don't use spell catcher.
I found a workaround posted elsewhere in the Apple discussion forum. When going through the printing dialog boxes, select Preview and print whatever number of pages I need from that window. It works fine so I'll use that method until a future Mac OS X update fixes the problem.
The security update for OS X on 3-1-06 didn't fix the problem even after I repaired permissions.
Thanks for responding.

HT204266 How do I see more than one issue of a magazine at a time in Newsstand on the iPad?

I can only see the most recent issue but I haven't read the last one (or the one before that, etc.). I want to see them for as long as it takes to read them.

Mortal Portal wrote:
Please, someone tell me that there is a way to see each instrument laid out at once for arrangement in the score view somehow (I still can't seem to get more than one to come up at a time).
i'm not exactly sure if this is what you mean, but if you want to see multiple instruments in the score view, just clicking anywhere on the "paper" brings up all the instruments used. if you want to see each single instrument come up in the score view, i think, like the previous person said is a matter of arranging the windows in the specific screenset, and having an Arrange and Score or Arrange and Matrix so that you can click on the regions and they'll come up on the other screen.
Make sure you save and/or lock your screensets.

How do I print more than one copy of a photo at a time?

Similar Messages

Maybe you are looking for