How do I re-assemble two halves of a large scanned photo to create the original picture in CS3

Good day!
Is there overlap between the scans?
If so File > Automate > Photomerge might be enough, otherwise you can load both images in one document and manually align/distort them and address color/brightness-diferences with Adjustment Layers.
Regards,
Pfaffenbichler

Similar Messages

Having trouble figuring out how to save the original photo after I've cropped it - i.e. I want to create a headshot of my husband from a photo of the two of us, but I also want to keep the original. Seems very basic, but can't seem to figure it out. Any h

Having trouble figuring out how to save the original photo after I've cropped it - i.e. I want to create a headshot of my husband from a photo of the two of us, but I also want to keep the original. Seems very basic, but can't seem to figure it out. Any help would be great!

Use File >> Save As
Choose a different file name so as not to overwrite the original and don't save any changes when closing the original.

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display/

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display.

There are two things we use the name "Slideshow" for in Aperture: a Slideshow Album, used for making Slideshows, and the Slideshow that is made. (Imho, it is a design mistake to not call the containers used to create Slideshows, Books, etc., "Albums".)
The Slideshow will use the Album Pick from any Stack. A good way to use Aperture is to promote the Image you want to regularly use (such as, for example, a Version with adjustments) to the top of the Stack. This makes it the Stack Pick, and will be the default Album Pick. If you haven't done that, you can still change the Album Pick for any Stack in a Slideshow Album. Expand your Stack(s), select the Image in each Stack that you want to be the Album Pick (and thus shown in the Slideshow), and "Stacks➞Set Album Pick". (Note the keyboard shortcut; there is also a Toolbar icon for this.) The change is immediate. The Slideshow will always show the Album Pick (or, if there is not one, the Stack Pick) for every Stack in your Slideshow Album.

How to get larger scanned photos in I-photo on a Mac

Want to get larger scanned photos from scanner to I-Photo files on a Mac.

Thanks for providing that information Fudgeface.
Are you using the Full Feature Software and Drivers?
HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
Check the driver name that is installed for the printer. The Airprint driver might be installed instead of the Printer's driver. (usually defaults to Airprint)
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen should show the name.
If the printer name shows Airprint, then that is the Apple drivers. Delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
With the HP Software, once you go into Edit, you should have the option for custom sizes.
Using the Apple Printer and Scanners software, you will also have the option for custom sizes.
I have provided a document for how to scan with HP Software or Apple's Software and make changes.
How to Scan: OS X v10.9.
Let me know how you make out.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How can i find the original picture in the correct event folder from an album folder picture?

how can i find the original picture in the correct event folder from an album folder picture? I can find the link to the original event folder, but is there a way to get right to the picture without having to search visually the event folder?

Depends on whatr you mean
Deleting from your phone does not delete from anywhere else
HOWEVER deleting from your Photo stream does delete from the Photostream so anyone looking at the PS from any device will no longer see the photo
But if your Mac iPhoto is set to automatically impor tphotos form PS or is you have manually imported photos from PS then onc ethey are imported they are on your Mac and change to PS will not affect them
for more on PS see http://support.apple.com/kb/HT4486?viewlocale=en_US&locale=en_US
LN

I cannot transfer music to my iPhone4. I just got it and was shown how to do it on iTunes. I managed to transfer photos, but not the music. I tried auto sync and also manyal. Nothing worked - still no music on my iPhone :-(

I cannot transfer music to my iPhone4. I just got it and was shown how to do it on iTunes. I managed to transfer photos, but not the music. I tried auto sync and also manyal. Nothing worked - still no music on my iPhone :-(

http://support.apple.com/kb/HT4527?viewlocale=en_US&locale=en_US

How can I print in black/white only a document that has colors in the original?

How can I print in black/white only a document that has colors in its original. I don't need the print out to be in color, and I don't want to waste the color ink.

It depends on your printer and the application you are using.
In some applications you can choose color vs. greyscale/black&white when you do File > Print. PowerPoint is one example of an application that allows this choice.
Otherwise, you can usually select greyscale at the time you print the document. Do File > Print. In the resulting dialog box, there should be an item called Copies & Pages (in Word and other applications) or Preview (in Preview). Click it. In the resulting list, you should then see an option called Printer Features. Click it. Then you should see an option called Printout Mode. Usually one of the modes is Greyscale or Black & White. Select it. Then Print.
This can also depend on your printer. Exactly what make/model printer are you using? And what kind of document are you trying to print (Word, PPT, JPEG, etc)?

How do I get rid of 1 picture that showed up scanned on top of another in Events in iPhoto? Now every picture I scan shows up under the same picture I did last night.

I scanned a picture this morning and it showed up in iPhoto on top of the last picutre I scanned last night. Now every picture I scan shows up under the picture I scanned last night. How do I stop this?

Does this apply?
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support

How Keeping Batch Live Trace To Fit The Original Picture's Size

to create a Live Trace movie Illustrator suddenly opens up a larger artboard than the actual picture to be live traced, and saves the result with this too large artboard size, so when I import it as an .ai sequence in After Effects, it's an over sized picture that is squeezed down to fit the After Effects composition. Any hint how I can avoid this I'd be grateful for.
regards,
frank

Hi Monika, thx for reply. Ya, suddenly because it didn't do it before. before the original images size was the sithe the live-trace-created .ai was opening with when I imported it to After Effects.
It probably is in conjunction with the pictures size and the size defined in the live-trace-tool from the adobe-bridge. When the picture was 640 x 30 and the output set to 1280 x 720 then the problem occurs. When the picture is 1280 x 720 and the output is set to the same values, then it opens up in After Effecs as desired, direct into place within the 1280 x 720 in After Effects.

How do I daisy chain two time capsules as a wired router and use the hard of both as back-up?

I have a newer time capsule tower and an older time capsule that I wasn't using. The older TC works fine I just decided to upgrade about 6 months ago. I decided to run an Ethernet cable from the room where the TC tower is to the room where the TV in order to create a wired connection to the TC tower. I wanted to use my Apple TV with a wired. In addition, I am in the process of buying a Channel Master DVR plus and besides wanting to use it with older TC wired also wanted to use the older TC’s hard drive to extend the recording time of the DVR. Will this work? If so, my questions are related to setup of all. I assuming I plug the Ethernet cable into the LAN port of the TC tower and the other end into the WAN port of the older TC. Is this correct? What settings do I need on the TC tower and the older TC to make this work as a wired connection? Do I need to turn off the wireless connection on the older TC? Will I just need to plug in the DVR into the older TC’s USB port to use its hard drive? Thanks for your assistance.

I assuming I plug the Ethernet cable into the LAN port of the TC tower and the other end into the WAN port of the older TC. Is this correct?
Yes
What settings do I need on the TC tower and the older TC to make this work as a wired connection?
The setup "wizard" will automatically provide the correct settings to the older TC to "extend a network using Ethernet" when you start from a factory default reset condition on the old TC.
Do I need to turn off the wireless connection on the older TC?
You can, but if the older TC is located some distance from the new TC, you might want to leave the wireless on to allow an "extended" network with more wireless coverage in the area near the old TC.
Will I just need to plug in the DVR into the older TC’s USB port to use its hard drive?
The USB port on the old TC (and new TC) will only support a normal computer hard drive.....not a DVR. If you want to connect a hard drive for more recording capacity, you will likely need to use a separate USB or SATA hard drive that is connected directly to the DVR, not to the old TC.
Check the documentation on the DVR to confirm how that device should be set up.

How do I delete images in Finder's "all my Files" when I have the same pictures in a file in Documents? It seems like a lot of duplication. If I delete the individual image it disappears in the folder. Thank You.

How do I delete images in Finder's "all my files" without deleting the images in a separate folder I have in Documents? It seems to be so much duplication. Just set up our new Mac and am not understanding how the files work. Thank you.

All My files is a "search folder"
it isn't real storage location. All files within your home folder are found by the criteria set for the search folder and displayed to you In one place.
If the folder doesn't meet your needs, remove it from the sidebar.

How do I open a TIF image email attachment using windows photo gallery as the default instead of microsoft office picture manager?

I have an internet fax program that sends faxes directly to my email as a TIF image attachment. When I download the attachment it lists Microsoft office picture manager as the default program to view the image. I would like to change the default program to view the image to Microsoft photo gallery. How do I change the default program to open an image attachment in firefox? Thank you

OK I have it figured out! I was using google mail. For what ever reason the imac/pc safari using google would not display the PDF in the email even though the ipad/iphone did. I tried a different mail system through work (not google mail) and it EVERYTHING works GREAT!!!!! Wow, a lot of wasted time over something that was actually working.

I bought adobe photoshop and adobe premiere a few years ago and love it; however, i recently got a new labtop which has no disk drive. How can i redownload my programs on my new product? I have all the original informaiton and serial numbers.

please help

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How change I change a recently changed Apple ID on an iPhone back to the original one?

I recently purchased a new iPhone 5S and gave my iphone 4 to my husband. All of his email comes to an alias address on my account. After he took over my old phone he created an Apple ID for that device but he found out that he cannot receive his alias address email on his "new" phone and wants it back the way it was when it was mine. My early research suggests that this cannot be done. Any suggestions out there?

When an alias is created in one account, it cannot be removed and used in a different account. If he returns to the "old" account where he can use the alias, then he's really in *your* account and the two of you will end up sharing everything - emails, contacts, calendars, notes, etc. This is probably not what you want, as an icloud account is designed to be used by one user, not several.
He should consign himself to losing his old "alias" and begin living with his new account. He can certainly add new alias(es) to that account if he's not happy with the account's ID/email address.
To change an icloud account on a device...
Go to Settings>icloud, scroll to bottom of screen and tap Delete Account. Then log in using a different ID.

HT1689 how do I delete apps in my ipod touch? I tried pressing on the app picture, it will start to wiggle but I don't see the "x" sign while wiggling

i want to delete some apps in my ipod touch, how can I do that?

- You can't delete the apps that came with the iOS.
- You can set Restrictions to prevent deleting apps. Go to Settings>General>Restrictions to check.

How do I re-assemble two halves of a large scanned photo to create the original picture in CS3

Similar Messages

Maybe you are looking for