How do I re-install my Mac OSX Server from scratch

Hi,
I have purchased two MacMini Servers with 10.6 OSX Server software pre-installed.
I have changed the organization as our company name changed and run into license issues.
I want to re-install the Mac OSX Server software and start from scratch. How do I go about this. I tried yesterday for many hours to do so and the new installs are still running into duplicate license issues and other issues. What is the best approach to do re-install? I am willing to erase the internal Hard Disk and boot (with an external DVD optical drive) if that is the best way to go. What are the steps?
I have the original CDs or DVDs and have extra, external hard disks to do a Time Machine backup, etc.
Thanks,
Don

If you are looking to do a nuke and pave of the system, and you have an external optical drive, then yes, that is likely the most direct method. Connect the optical drive, insert the installation DVD, and reboot the system targeting the optical disk as the boot volume (you can do this by holding down the C key or the Option key during startup).
Now, if you do not have an optical drive, you can put the installation disk into another Mac running 10.6 and use the Remote Install Mac OS X application in your Utilities folder.
Hope this helps

Similar Messages

How to utilise forms installed in Oracle9i Application Server from client

Dear Friends,
I have installed Oracle 9i Application Server and Forms 5.0 Reports 3.0 in the application server. How to make use of application server so that forms installed in it available to end users, the client. What are the steps i need to do. Please explain.

Forms 5 & Reports 3 in Developer 2.1 have been desupported for a number of years now. If you haven't already figured out how to get it working on the web, download the Forms & Reports Services Standalone version of the 10g Application Server. It has Forms & Reports properly configured after the instalaltion. Just look under the Demonstrations tab of the home page and click to run either Forms or Reports on the web. You can customize your setup afterwards for your application. Of course you'll need to upgrade your application.
You can find this download at:
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
under "Forms & Reports Services Standalone"
It is a 1 CD download.
Cordially,
Steve

I install windows 8 via boot camp but its corrept so i recover this by the bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automaticly now its become a pc how can i install my mac osx again?

i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me

If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you have an earlier model:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Dreamweaver 8 install on Mac OSX 10.6 Snow Leopard

Hi all,
I have just done a fresh install of Mac OSx Snow Leopard (10.6) and am trying to install our copy of Dreamweaver 8 onto it. However I have now run into a few problems. Firstly it came up with an error message stating that some old format is no longer supported or something. I cant get the error message back up now, as now the CD will not mount within OSx!
Can anyone assist with this? Thanks.

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
OS 10.6 Snow Leopard is once again available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/

When I am re-installing the Mac OSX snow leopard onto an older Mac I run into the window that says select the disk where you want to install Mac OSX but nothing is there to select

I am trying to re-install the Mac OSX snow leopard onto an older I mac with a new hard drive. I run into the "select the disk "where you want to install Mac OSX but there is nothing in the window to select. Any advice?

After you install a new hard drive, you need to boot to another drive to initialize it to MAC OS Extended (journaled) format and create the partition(s) on the drive. You do this using Disk Utility. Otherwise, the mac operating install process doesn't see a formatted disk to install to.

How Do I Get Java For Mac OSX 10.5.8 On A PowerBook G4 Or Update To Minimum MAC OSX 10.6.8 or later Without Spending Any Tech Mind Of My Own And Also Not Buy ANYTHING AT ALL!!!?????

How Do I Get Java For Mac OSX 10.5.8 On A PowerBook G4 Or Update To Minimum MAC OSX 10.6.8 or later Without Spending Any Tech Mind Of My Own And Also Not Buy ANYTHING AT ALL!!!????? Please Help!!!

Sorry, it's for 64 bit IntelMacs only...
updating Java SE 6 to 1.6.0_26 for 64-bit capable Intel-based Macs.
Java for Mac OS X 10.5 Update 10

How do you know what version Mac OSX is on ANOTHER drive?

How do you know what version Mac OSX is on ANOTHER drive without starting that drive
and seeing the system profiler? In fact, because the drive wont start up, Now I am wondering if it is pre-intel. ? CMD-I doesn't do it. Thanks

Why mess with this? Well, I got the HDDs and the enclosure from my previous PPC, so I'd like to make use of it all without $pending again.
I don't see any problems with using the card and drives on your new Mac. Hardware is too pricey to just leave behind if you can't help it. With the new drivers I suspect you'll be able to use your drives, I just don't think you'll be able to boot from them if the interface card requires drivers. They should still be very fast storage devices, and probably reliable due to the ongoing support the vendor has provided.
I went through the same type of issue when I bought my Dual G4 1.42 Tower (upgraded from a Quadra 840AV ). Several of my devices were SCSI (I was into SCSI Wide/Fast drive arrays at the time for video capture), and I was able to use an Adaptec card for scanning for several years with Jaguar and Panther. I'd spent quite a bit of cash to ensure high quality and performance and didn't want to loose all of the investment. Eventually the SATA hard drives and other USB and Firewire replacements became so cheap and performance improved enough that loosing SCSI with Tiger was not a big deal. I do think I should get about 5 years of hardware compatibility with most products and I keep older Mac's around for dedicated services as long as they aren't a costly maintenance issue.

Hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

On your friend's computer with an internet connection, log into the Mac App Store with your ID and download Yosemite from the Purchases section of the Mac App Store. The make a bootable USB install media using
http://liondiskmaker.com/
Then boot from that on your computer and install
You need an internet connection to install via Recovery mode

Elements 4 crashing immediately after install on mac OSX 10.4.11, can anyone help ?

I have an infuriating problem with Elements 4 crashing immediately after an install on mac OSX 10.4.11, can anyone help ?
I was given the computer, which still had Elements 4 on it although it always crashed on opening, i removed the program and bought a 2nd hand hard copy of Elements 4 from eBay.
When i install the new copy it opens up with the "credits" but at the bottom right it still shows the past owners name as licensee briefly, then crashes before fully opening.
Does anyone know what is going on? I know it's an old version but i find elements4 perfect for my needs
Thankyou for reading.
Simon

More information needed. Are you saying you're just running the computer from the PO's user account? I would very strongly recommend erasing the disk and starting over with a fresh install of OS X for a number of reasons.

How to open url photoshop on mac OSX ?

How to open url photoshop on mac OSX ?
Safari doesn't know internet adress starting by "aam://" please help me...

http://helpx.adobe.com/creative-cloud/kb/cc-download-button-gives-aam.html

Installing Mac OSX Server hangs at Network Configuration

Hi there!
I am installing my new Mac OSX Server (SNow Leopard) straight forward the assistant.
Asking for Language: OK
Asking for Country: OK
Keyboard Layout: OK
Entering License: OK
Configuring Network:
Ethernet: Static
Airport: OFF
FireWire: OFF
Clicking on Forward to continue: The assistant keeps telling me "configuring network". Nothing happens. It is doing that for hours now.
I tried to connect with Server Admin tool: OK works.
The network is up and running, but the assistant is not continuing.
Any ideas?
Thanks for any help or suggestion

Smells vaguely of a DNS error or IP routing or a network connectivity problem.
What did you specify for your network settings, and particularly what was entered for the DNS server address? If you're not running DNS on your local network here, then enter no DNS servers as part of the prompting, and let Mac OS X Server establish its own default single-host DNS.
(You're not going to be able to use your ISP DNS here; those ISP DNS servers are not valid when you are establishing a server on a network behind a NAT gateway.)
I'd probably wipe the disk and boot from DVD and reload.

How many luns does mac OSX support from a single target (array) is it 255??

How many luns does mac OSX support from a single target (array) is it 255?
For example, if using the Dual-channel 4Gb Fibre Channel PCI Express card? Is it 255, 512 or higher? I know it uses the ATTO driver, but I can't find any documentaiton about the upper limits of how many luns this HBA can address from a single target array on a SAN. Thanks.

Hi,
The card should be an ATTO 42ES whcih supports 255 LUNS per channel
Here's the info from the attached link
Consider the following Celerity FC host adapter guidelines:
• ATTO 4-Gb and 8-Gb FC cards (PCI-X and PCIe only) are supported. • Latest HP-specific ATTO Celerity FC host adapter driver • Latest HP-specific ATTO Configuration Tool • A maximum of 256 targets per host adapter channel are supported. • A maximum of 255 logical unit numbers (LUNs) per host adapter channel are supported. • PowerPC- and Intel-based servers are supported.
http://www.attotech.com/pdfs/MacOSFCconnEVA5697-7653.pdf
Hope that helps
Beatle

Not installing Mac OSX Server 10.5.4

Hello Friends...
I purchased Mac OSX Server 10.5.4 Leopard DVD.
I would like to install and configure it.
According to the manual , its not working.
It is getting upgrade to my Mac mini 10.5.7.
After installing , it wants to restart. But, its not booting and getting always restarted.
So, any advices and suggestions from your side.
Regards,
Bhanu

I'm going to point you to these two places to see if you can resolve your issues:
http://discussions.apple.com/thread.jspa?threadID=2019706&tstart=300
http://support.apple.com/kb/HT3479
Basically what happens is if you insert the Server install DVD and start the installer package, if the DVD will boot your Mini it will show the 'Restart' button. If it can't, the installer will run and then you should follow the instructions in the second link.
Given the fact that many have tried and failed with the second method, I would attach the Mini, in target disk mode, to another Intel-based machine and run the install from there with the Mini as the target. Then boot the other machine from the Mini's disk and let the Setup Assistant finish -don't configure any services on the server in this mode other than setting it up as standard or advanced, apply any updates and then restart. Then shutdown both machines, detach the Mini, then let it boot on its own and continue configuration from there. I've done this several times with both PPC and Intel-based machines with positive results.

Mac OSX server not supported behind Airport Extreme NAT router?!!

For a customer, I recently installed a new XServe, within a local network with an Airport Extreme (n) with FW 7.4.2. Mac OSX Server manages the router (which has a fixed IP from the ISP). Because the Mac OSX Server runs a DNS server (supporting a local domain), OSX Server reconfigured the Airport Extreme, so that it would forward DNS queries to the server. The server's dns server will forward queries for non-local domains to the ISP's dns servers.
All clients get their IP configuration using DHCP from the router. You can't use the DHCP service of the server, as you can't disable DHCP on the router (in NAT mode).
All clients get the router's IP as the dns server.
HOWEVER:
The Airport Extreme can't connect to the internal DNS server! *It doesn't seem to be able to route dns requests to the internal network* (verified using nslookup). Any dns queries sent to the router will time out.
Come on, Airport Extreme team.. you can't claim the Airport Extreme to be the ideal router in combination with an OSX server, if this simple and very common setup is not supported! How hard can it be to either:
...*Allow us to disable DHCP on the router* (even when in NAT mode), so we can use the OSX server for this (which will dispatch the correct DNS settings)
...*Allow the router to route DNS queries to the local DNS* (OSX) server (which should be working anyway)
Message was edited by: blackbit

blackbit, Welcome to the discussion area!
It doesn't seem to be able to route dns requests to the internal network (verified using nslookup).
That is true.
This is a user to user discussion area so Apple will not see your suggestions here. Instead go to www.apple.com/feedback/airportextreme.html and send them to Apple.

Adding Bootp/DHCP Options to Mac OSX Server 10.4

Our telephone supplier - Splicecom (http://www.splicecom.com/) - has asked us to ensure that option 66 and option 67 are enabled in order for their PCS400 handset to pick up an IP address from our Mac OSX Server DHCP server.
Please can somebody advise on how to either:-
a) ensure that they are already enabled
or
b) tell me how to enable them
Many thanks
Paul

I think you need some other DHCP server to acheive what you need
option #66 = Boot Server Host Name
option #67 = BootFile Name
(Try "man bootpd" in Terminal.)
The ISC DHCP server can be installed in OS X using PortAuthority / DarwinPorts:
"dhcp 3.0.3, Revision 1, net/dhcp (Variants: darwin_8)
http://www.isc.org/products/DHCP/
ISC's Dynamic Host Configuration Protocol Distribution reference implementation of all aspects of the DHCP protocol, through a suite of DHCP tools: A DHCP server, client, and relay agent. These tools all use a modular API which is designed to be sufficently general that can easily be made to work on POSIX- compliant operating systems and also non-POSIX systems like Windows NT and MacOS. The DHCP server, client and relay agent are provided both as reference implementations of the protocol and as working, fully-features sample implementations. Both the client and the server provide functionality that, while not strictly required by the protocol, is very useful in practice. The DHCP server also makes allowance for non-compliant clients which one might still like to support.
Platforms: darwin
Maintainers: [email protected]"
But you'll need to configure this DHCP using a texteditor.

How do I re-install my Mac OSX Server from scratch

Similar Messages

Maybe you are looking for